Used Felder G 500 for sale (114)

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 With sanding shoe in good condition Driven left and right Tech. info: Work table size: 2200x800 mm Wheel diameter: 250 mm Band width: 150 mm Belt length: 6200 mm Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Codoth R Tljpfx Aftjgp Size for transport: 320x110x145 cm Stock no: 2002056

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Cgjdpfx Aoxbq Uleftep Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: used, Year of construction: 2017, Fw 1102 Perform Year of manufacture: 2017 5 operating hours Cjdpfx Asxrwn Toftegp 15 kW motor with brake Electric table height adjustment Continuously variable feed 2.5 – 18 m/min Sanding height: 3 – 170 mm Abrasive belt dimensions: 1120 x 1900 mm Belt blowing, timer-controlled Sanding width: 1100 mm Extraction connection: 2 x 160 mm and 1 x 120 mm Vacuum carpet with integrated blower in the machine frame 1st unit: rubber-coated profiled contact roller 2nd unit: electro-pneumatic segmented sanding pad, 25 mm segment width, for veneer sanding work With lacquer sanding, digital grit compensation Pneumatic sanding belt oscillation Roller table extension on both sides Scotch-Brite brush unit at the machine outlet, 150 mm diameter Electronic sanding belt run monitoring Includes 30 sanding belts

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 11 kW (14.96 HP), volume flow: 8,000 m³/h, nominal flow rate: 6,950 m³/h, negative pressure: 2,630 Pa, H 3 "GS dust-tested" Extraction connection 350 mm Ø Pneumatic JET filter cleaning Extinguishing system with powder extinguisher Cedpswty Uzsfx Aftogp With rotary air lock

Condition: used, Albatros Numerical Control with TPA CAD Software Working range on X-axis mm 3260 Working range on Y axis mm 1200 Working range in Z-axis N ° 2 work fields Bar worktop No. 6 electronically adjustable bars by C.N. Line laser for virtual 0 position in Y direction N° 4 pneumatic Bakelite bars for lifting the panel No. 3 electronically adjustable suction cups by C.N. for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis, with automatic tool changer with No. 10 positions, Hsk type cones Automatic tool change system with 12 positions - positioned on the machine side Drilling head with 17 spindles arranged as follows: - No. 8 verticals on X axis - N° 5 verticals in Y axis - No. 2 horizontal on X axis - N° 2 horizontal in Y axis No. 2 blade groups for making grooves on the X and Y axes Front protection and safety system with carpets Automatic lubrication system (Air conditioning system for cooling and cleaning of machine control) Vacuum pump mc/h 250 Cedpjvph Hxjfx Aftjgp

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Saw lifting and lowering Digital measurement display on right side Cutting width right: 850 mm Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Spindle covers Main saw motor: 5.5 kW Codpfswi Uftsx Aftjgp Milling motor: 5.5 kW European CE Certificate

Condition: like new (used), Year of construction: 2023, machine/vehicle number: 220.09.023.23, functionality: fully functional, operating hours: 1,131 h, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 18 m/min, Edge thickness...0,4-3 (6) mm Panel thickness...8-60 mm Feed speed.. 10+18 m/min. Aggregates: Spraying unit top and bottom - Separating agent Joint trimming unit - dia tools Edge (coil+strips) magazine Quickly changeable application unit + 1 additional, "Easyclean" system "Glue box" system Pressure zone - 1+2 rollers, pneumatical Cgsdpsv Rlzisfx Aftep Spraying unit - lubricating agent Guillotine for coil edge 0,4-3 mm End trimming unit 2x0,35 kW, 200 Hz, tilt-able 0-10° Trimming unit - R2+flat, 2 x 0,75 kW, 200 Hz Profile scraping unit, R2, pneumatically ON/OFF Corner rounding unit, 2 motors, servo adjustment Flat scraping unit in nesting execution, pneumatically ON/OFF Buffing unit Spraying unit top and bottom, cleaning agent Condition: Machine is like new, only 19 km of edge was done

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Cjdpfowa Rlkox Aftegp Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: like new (used), Year of construction: 2014, X-axis feed rate: 9 m/min Total length: 3,200 mm Workpiece height (max.): 45 mm Edge thickness (max.): 3 mm Codpfx Afowat Aletegp Height adjustment type: mechanical Input voltage: 400 V Chip removal: 2 mm Technical specifications Year of manufacture: 2014 Edge thickness: 0.4-3.0 mm Motor voltage: 3 x 400 V Motor frequency: 50 Hz Min. workpiece length: 210 mm Min. workpiece width: 70 mm Workpiece height: 8-45 mm Chain feed: 9 m/min Cross-cut saw unit: Yes Radius scraper unit: Yes Surface scraper: Yes CE-certified version Joining unit with a chip removal rate of up to 2 mm Automatic feeding of roll materials Individual feeding of strip materials Gun-type shear for rigid PVC/ABS up to 3 mm thick Glue application using Glue roller Cross-cut saw unit, 12,000 rpm, 0.27 kW 2 carbide saw blades, 100 mm diameter, 24 teeth Multifunctional milling unit with 2 HF motors with 0.35 kW for radius, flush, and chamfer milling for thin edges Extraction connection: 2 x 80 mm, 1 x 120 mm Max. connected load: 7.5 kW at 3 x 400 V / 50 Hz

Condition: excellent (used), Year of construction: 2021, operating hours: 3 h, functionality: fully functional, Machine almost not used, like new, year of production 2021. Dimension of the table 220x80cm. Csdpfx Aoudy D Toftegp

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Device description Table width - 850mm Drill stroke - max 70mm Number of spindles - 21 Distance between spindles - 32mm 4 pneumatic clamps Cgjdpevzapcofx Aftep Drilling depth adjustment Vertical, horizontal and angle drilling 1.5kW main engine Pneumatically adjustable drilling speed Pneumatically adjustable drilling angle Quick-release drill attachment

Condition: excellent (used), Year of construction: 2011, working width 950mm Cgjdpfx Afow Afd Hetop 1 kombi unit pneumatic segmented pad two feeding speed electric table regulation pneumatic oscillation motor power 11kW year of production 2011

Condition: like new (used), band width 150mm mechanical oscillation possible to sanding on pad or plane additional table for sanding unregular edges Cgsdpst I Df Rsfx Aftsp possible to work without oscillation tables tilt year 2008

Condition: excellent (used), Year of construction: 2013, I sell the format sliding table saw with scoring Manufacutrer: FELDER Model: K975 Year 2013 Cutting length 3200mm. Cutting width 1350mm Cutting height 130mm (at saw blade 400mm) Cgjdpfett Nq Dex Aftop Saw blade and scoring tilting 0-45° digital Saw blade and scoring height adjustment digital Parallel fence manual adjustable. Turn on the main saw blade and scoring unit from control panel Turn on the main saw blade and scoring unit from aluminium sliding table Main motor format sliding table saw 5,5KW (7,5 HP) (3500/4500/5500 rpm adjustable) Scoring motor format sliding table saw Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately.