Used Fiori Db 250 S for sale (76,521)

Year of construction: 2025, condition: new, Vacuum lifters BARBARIC swiveling, including hoists, equipment package consisting of: -Vacuum lifters of uniWood B3-90 degrees - 250 comfort version, with integrated chain hoist increased load capacity: 250 kg Suitable for the vertical and horizontal transport of flat standard plates. Vacuum generation is pneumatically by means of ejector. For lifting of permeable materials (MDF of 8 mm thick), which is Reinforced Vakkumpumpe installed. -Technical data- Chain hoist lifting speed: 0-10 m / min stepless by frequency converter Kwodpfxoc Umftj Afzet Lifting height (operating range): 2.0 m Length of chain: approx. 3.5 m operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: ca. 85 kg -Security system - the lift is equipped with a vacuum gauge. Release the load by means of 2 buttons -Hoists BARBARIC Load capacity 250 kg to the hoist Consisting of: Column, console and smooth-running boom. Delivery including Schiebefahrwerk and energy supply. Height: approx. 4, 2 m Bottom bracket: approx. 3.5 m Throat depth: 5 m Swivelling area approx. 250° Panning and cross travel by hand Base plate with 700 x 700 mm and mounting material. Supplied with adhesive anchors for concrete floor. This fixture requires a similarly proven concrete floor. The static verification of soil is on site to do and accordingly to document. Others

Condition: ready for operation (used), Siemens 6FX1190-3AA00 MS 250 Module E Stand B used 100% functional Kodpjxagrkefx Afzowt

Condition: used, mileage: 340,000 km, power: 330 kW (448.67 HP), first registration: 01/2018, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 4,000 mm, loading space length: 8,750 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, DAF CF 450 FAN 6X2 with HEIWO refrigerated box, Carrier cooling unit, 3,000 kg tail lift, in excellent condition Body: Fully insulated. HEIWO 28 First registration date: Periodic technical inspection valid until: 11/2026 Mileage: 340,000 km Engine power: 330 kW (450 hp), 11-liter 6-cylinder Transmission: Automatic Interior dimensions (LxWxH): 875 x 250 x 275 cm Unladen weight: 13,710 kg Payload: 14,290 kg Gross vehicle weight: 28,000 kg Color: White Suspension: Parabolic front, air suspension on 2nd and 3rd axles Emission standard: Euro 6 Axle configuration: 6X2 Steering axles: Yes, 1st and 3rd – rear axle is also liftable Front tires: 385/65 R22.5 tread left 20% 2nd axle tires: 295/80 R22.5 tread left 20% 3rd axle tires: 385/65 R22.5 tread left 50% Tail lift: Dhollandia 3,000 kg rear liftgate Refrigeration: Carrier Supra Next service in: 75,000 km, just serviced Cab type: Space Cab Extras: Heavy-duty engine brake, Euro 6, 9-ton front axle, steered and liftable tag axle, air conditioning, auxiliary heater, Carrier refrigeration unit (diesel engine and 380V plug), 3,000 kg tail lift with in-cab control, Orlaco front and rear view cameras, 5x lashing rails in floor/ceiling, 3x impact protection plates, stainless steel rear portal, separate batteries for the body, 620-liter aluminum fuel tank, adaptive cruise control, radio/CD player, various additional lighting, 6x reverse lights, complete DAF maintenance history, just serviced and new inspection, always serviced under contract, robust Heiwo box body in perfect condition, towing jaw coupling, power and air connections for drawbar trailer. VERY NICE BOX TRUCK TECHNICALLY AND VISUALLY IN EXCELLENT CONDITION COMPLETE DAF SERVICE HISTORY NEW INSPECTION AND JUST SERVICED Cooling unit brand: Carrier Additional information: * Payload: 14,290 kg * Type | 1st axle: Michelin * Tire size | 1st axle: 385/55 R22.5 * Tread depth inner left | 1st axle: 20% * Tread depth inner right | 1st axle: 20% * Max. axle load | 1st axle: 9,000 kg * Type | 2nd axle: Michelin * Type | 3rd axle: Michelin * Tire size | 2nd axle: 315/70 R22.5 * Tire size | 3rd axle: 385/55 R22.5 * Tread depth outer left | 2nd axle: 20% * Tread depth inner left | 2nd axle: 20% * Tread depth inner left | 3rd axle: 30% * Tread depth outer right | 2nd axle: 20% * Tread depth inner right | 2nd axle: 20% * Tread depth inner right | 3rd axle: 30% * Max. axle load | 2nd axle: 11,500 kg * Max. axle load | 3rd axle: 7,500 kg * Wheelbase: 700 cm * Tail lift | Manufacturer: Dhollandia * Tail lift | Lifting capacity: 3,000 kg * Price on request: Yes * Position | 1st axle: Front * Brand | 1st axle: Other * Brake type | 1st axle: Disc brakes * Suspension | 1st axle: Parabolic springs * Steering | 1st axle: Yes * Position | 2nd axle: Rear * Position | 3rd axle: Rear * Brand | 2nd axle: Other * Brand | 3rd axle: Other * Brake type | 2nd axle: Disc brakes * Brake type | 3rd axle: Disc brakes Kedpfxoxzm E Hs Afzswt * Suspension | 2nd axle: Air suspension * Suspension | 3rd axle: Air suspension * Lift axle | 3rd axle: Yes * Twin tires | 2nd axle: Yes * Driven | 2nd axle: Yes * Steering | 3rd axle: Yes * Differential lock | 2nd axle: Yes Additional equipment: * 2-pedal control * 27 MC/CB radio * Aluminum fuel tank * Anti-lock braking system * Automatic climate control * Roof spoiler * etc.

Condition: new, functionality: fully functional, machine/vehicle number: S-CL-250-FN-EC, input voltage: 230 V, overall weight: 35 kg, total width: 430 mm, total length: 340 mm, total height: 600 mm, volume flow: 250 m³/h, Equipment: type plate available, ISI S-CLEANER Mechanical air filter device (soldering smoke) for up to 2 workstations Type: 250 FN Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating soldering smoke. TECHNICAL DESCRIPTION: Air volume: - 240 m³/h (volume flow) - 170 m³/h (effective air output) (depending on the filter configuration without collection elements) Intake nozzle: 2 x NW 50 mm (rear) Filter configuration: - Pre-filter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Kwjdpevrylfefx Afzjt Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Dimensions: length 340 mm / width 430 mm / height 600 mm Weight: 35 kg

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD Kodpfxox D Rqre Afzowt • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: used, Year of construction: 2007, 106 369-11 bore diameter 3 - 65 mm number of spindles 1 total power requirement 45 kW . Siemens control Simens Sinumerik . weight 45 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Kjdpfx Afowizn Uszewt

Condition: new, wheel diameter 250 mm grinding wheel size 250 x 25 x 20 mm turning speeds 2850 U/min Kwsdpfx Afexak H Sezjt voltage 400 V total power requirement 2.0 kW weight of the machine ca. 23.0 kg. dimensions of the machine ca. 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Condition: new, grinding width 32.0 mm max. dia. of grinding wheel 250 mm grinding wheel size 250 x 32 x 32 mm Ksdpfsxaa Aiox Afzjwt turning speeds 2850 U/min Grain size K 36 / K 80 engine output 1.5 kW voltage 400 V weight 30.0 kg range L-W-H 510 x 320 x 360 mm scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Kodoya D A Uepfx Afzewt Machine weight approx.: 8 t

Condition: used, Year of construction: 2023, working width: 2 mm, Working width 2.50 m / depth 80 cm, tines. Number of tines: 13 on the grab, weight 447 kg, capacity 1.27 m². Ksdeyahcfopfx Afzjwt

Condition: excellent (used), Year of construction: 2002, Arburg 270 S-250 - 60 Kwsdpfx Afjx I Rdvszot Clamping force: 25 tons Year of manufacture: 2002 Tie bar spacing: 27 x 27 cm Control system: S Includes conveyor belts

Condition: new, *AVAILABLE IMMEDIATELY* Including hand pump / all-steel floor Technical Data: • Brand: Martz • Model: KIPPER 250 S • Vehicle type: Rear tipper trailer • Condition: New vehicle • Initial registration: Not yet registered • TÜV inspection: 3 years from initial registration • Internal dimensions (LxWxH): 253 x 152 x 30 cm • External dimensions (LxWxH): 371 x 164 x 111 cm • Permissible total weight: 750 kg • Unladen weight: 323 kg • Payload: 427 kg • Chassis: High-loader (wheels located under the body) • Tyres: 165/70R13 • Axle: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Double-walled, anodised aluminium side panels • All side panels can be folded down and removed • Removable steel corner posts • Insert sockets at all four corners for fitting tarpaulin frames, mesh sides, side wall extensions, or headboard extension • Plastic tie-down buttons mounted to the side panels for fastening nets or flat tarpaulins • Sturdy eccentric locks Kwedpfsx Tbk Dox Afzjt • 44° tipping angle • 100 km/h manufacturer approval • Robust full steel floor • Reinforced V-drawbar • Strong welded steel frame • Frame fully hot-dip galvanised by immersion bath • Multiple cross-beams for increased point load capacity • Double-acting hand pump for manual tipping • 6 certified lashing rings set into the side rails (600 DaN/kg) • Unbraked rubber-sprung KNOTT axle • 13-pin plug • Reversing lights • Large, high-visibility safety lighting • Integrated rear fog light • Rear frame lighting recessed for protection • Central jockey wheel Optional extras – On request: • Mesh sides • Side wall extensions • Cover net • Flat tarpaulin • Anti-theft device • Spare wheel • Tool box • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Registration documents can be sent in advance or export plates (Germany) can be provided - Export plates including customs registration available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available from stock! We have been authorised dealers and service partners for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, omissions and prior sale -

Condition: used, mileage: 585,975 km, power: 448 kW (609.11 HP), first registration: 09/2007, fuel type: diesel, axle configuration: 8x4, next inspection (TÜV): 02/2022, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, hydraulics, low noise, onboard computer, parking heater, spoiler, traction control, Mercedes-Benz ACTROS 4160 S 8x4/4 WSK *250 TONS*  WSK = torque converter clutch  Maximum semi-trailer weight: 250 TONS!!  Engine: V8 (15928 cc) / Type: OM 502 LA / 600 PS/HP (448 kW) BlueTec EURO 5 Gearbox: G 240-16/11.7-0.69 Gears: 16 (forward) Gearbox: manual gearbox / hydraulic gearbox shift Clutch: WSK - torque converter clutch Kodpfxei Idwhj Afzewt Technical maximum weight: 41,000 kg Repair history according to previous owner: -- NEW GEARBOX incl. WSK (2019/2020) -- NEW CLUTCH, complete clutch incl. flywheel (2019/2020) -- NEW HPS SHIFT CYLINDER, both cylinders (HPS = hydro-pneumatic shift) -- NEW SENSOR DEVICE = gear shift at the gear lever -- NEW INJECTORS (2019/2020) / already changed twice -- NEW TURBO -- NEW COMPRESSOR Maintenance intervals according to previous owner: -- at least once a year all NEW OILS -- every 2 years NEW COOLANT and AIR CONDITIONING GAS LEAF SUSPENSION LEAF AIR / STEERING AXLE LEAF LEAF -- Vehicle from 1st hand! -- Austrian vehicle! / AUSTRIAN TRUCK! Special equipment: - WSK torque converter clutch - steerable LEADING AXLE - HYDRAULIC SYSTEM - KNBN HYDRAULIC SYSTEM for trailer steering - ENGINE BRAKE with CONSTANT THROTTLE - Main tank behind driver's cab 900 liters aluminum - Frame reinforcement - Differential lock - Telligent braking system with ABS and ASR - Electrical connection for additional consumers - AdBlue tank 95 liters - Fifth wheel coupling JOST JSK 38G-1 H=290 mm - Sliding device JOST EV HD 800 height 57mm 36 t - Beading plate for trailer piston - 3x work lights at the top rear of the driver's cab - Rotating light bar - Brake and electrical connections, high -- Compressed air filling connection, front -- Compressed air tank, aluminum -- Electric pop-up roof (lifting roof) -- Parrot mobile hands-free system -- CD radio -- Multifunction steering wheel -- Tinted windows, without band filter -- Burl wood decor, driver's cab -- Comfort driver's cab suspension -- L-shaped driver's cab -- Sun visor -- AIR CONDITIONING -- Additional thermal insulation -- Auxiliary heating, Webasto Air Top 2000 -- Compressed air horns on the driver's cab roof -- Automatic daytime running lights -- Halogen fog lights -- Electrics for third-party bodies -- Increased engine cooling capacity -- POWER TAKE-OFF -- Driver's comfort suspension seat -- 2x BED -- L Low noise -- Air intake rear top TIRES 1+2 axle: 385/65 R22.5 3+4 axle: 315/80 R22.5 -- etc. ….. EXPORT PRICE! for more info: Mobile phone: Would you like to visit us? We offer a free pick-up service from the train station in 4020. Will you take care of everything for you with the used vehicle? If you agree, we will be happy to accept this offer. This offer is non-binding and subject to change. Errors and prior sale reserved.

Condition: used, Technical details: max. ram stroke: 250 mm Kodpfxew Au I Io Afzjwt workpiece diameter - max.: 80 mm max. workpiece length: max. 900 total power requirement: 1,5 kW weight of the machine ca.: 2,1 t

Condition: reconditioned (used), Precision guide and spindle lathe Make: GDW Model: LZ 250 S Year of manufacture: 1998 - overhauled, repainted RAL7035 light gray Mach. no.: 069 Centre height: 125 mm Centre width: 500 mm with guarantee geometric acceptance with test report Accessories: Kwedpfx Afjpz Hubozst - 3-axis digital display ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool holder base body size A - Bed stop - Coolant system - Chuck protection hood, electrically secured - Chip rear wall - Operating instructions - Used as seen -

Condition: new, empty load weight: 614 kg, maximum load weight: 1,386 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,530 mm, loading space width: 1,550 mm, total length: 1,630 mm, total width: 990 mm, total height: 3,930 mm, suspension: steel, tire size: 165R13C 96/94N, This tipper has a frame construction with a closed profile, which increases its stability. It uses a 5-stage cylinder which enables a larger tipping angle (up to 55°). All side walls can be opened and removed. The model also has a steel floor. | KIPPER 250/2 C S 2T Reversible tipper | Galvanized frame | Lockable storage shaft for 2 access ramps incl. ramps Ramps (L:243cm, W: 30cm) | Loading area dimensions: L: 2.53m W: 1.52m Dropside height: 0.40m Loading height 0.70m | 4 lashing rings (2 left, 2 right) recessed in the floor | Knott axle with drum brake | Leaf suspension | Operating voltage 12V | Spindle parking brake | Errors excepted. Kjdpfsu R D Sdox Afzowt

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Kedpfexl Tp Tex Afzowt Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Kjdpfx Aewz R Iujfzewt Freight basis: ex-works

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Kjdewlkcajpfx Afzswt

Condition: used, Year of construction: 1996, Hydraulic mandrel bending machine with many accessories Preselection of 8 different bending angles with digital display Kwjdpoq Daxtofx Afzot Digital length display and digital display of twist Max. usable length: 6096 mm Round steel tube (S 235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square steel tube: 50 x 50 x 4.0 mm Rectangular steel tube: 60 x 40 x 2.0 mm Max. bending angle: 180° Weight: approx. 1800 kg

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Kwsdpev A Uw Dofx Afzjt Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: ready for operation (used), H & B / S & F AVL 220 Electrical transmitter, measuring range 0-250 mbar, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Kjdpfsi Eac Njx Afzswt

Condition: good (used), Manufacturer: MBT Tip: MV-250 S Motor: 5,5 kW hopper size: 780 x 600 mm Kjdpfshzr U Iox Afzowt Housing size: 3500 x 1000 x 2200 mm

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 39 cm³, injection weight: 36 g, mold height (min.): 200 mm, power: 10.2 kW (13.87 HP), Year of manufacture: 2003 Clamping force: 25 tonnes Kodpfexgiaqox Afzswt Distance between columns: 270 x 270 mm Screw diameter: 25 mm Injection volume: 39 ccm Shot weight: 36 g for PS Equipment: conveyor belt, manipulator, core pull, Euromap After full inspection!

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h Kjdjvl Skgopfx Afzswt