Used Flash Pasteurizer for sale (756)

Year of construction: 2025, condition: new, chamber pasteurizer, with water sprinkler, temperature control for heating rate, holding time and cooling time, Ksdsykgxjpfx Anysdn heat supply over hot water heat exchanger throughput: 360 pcs. 1 liter bottles per hour or 550 pcs. 0.5 liter bottles

Year of construction: 2025, condition: new, Additional installed holding section. After reaching the adjusted pasteurizing temperature of Kdsdpfx Aegig Igenyen 90°C, to hold the juice on this temperature for 3 seconds, before it goes into the heated buffer tank of the filler.

Year of construction: 2009, condition: excellent (used), Pasteur 500l / h gas overhauled automatic temperature control Kodpfxogigryj Anysdn

Year of construction: 2025, condition: new, 18 kW e-heater for 1000 pices 1 liter bottles Kdsdpfo Hmwkox Anyon used for pasteurization of cold filled bottles, jars,... automatic temperature control 400V 50Hz 32A 18kW mounted on moveable frame

Year of construction: 2025, operating hours: 20 h, condition: new, stainless steel construction for 1 Euro-Palette with a loadinghight of 1500mm max 40 crates with 400 x300 x300mm L x B x H Chamberinsidedimensions: 1300x900x1800mm (L x B xH) Thickness of Insulation approx. 50mm Electronic Regulation of Pasteurizationprocess: Adjustment of heatingspeed (depends also on capacity of the steamboiler) Adjustment of pasteurizationtemperature Adjustment of required holdingtime on Pasteurizationtemperature Adjustment of switch-off temperature electronic Datalogger for Pasteurizationtemperature and Chambertemperature Aircirculation by High effective Stainless Steel Airblower Steaminjection in the Airchannel for opimized steammixing pneumatically actuated Steamvalve Kondensateoutlet on the bottom of the Chamber DN 70 4 pcs. adjustable Feets Steamconsumption: approx.:. 50 kg / H at 1 bar electric power consumption: 4kW Kedpfx Aeclq Dqonyjdn 16A / 5pol. / 400V

Year of construction: 2025, condition: new, functionality: fully functional, stainless steel construction for 2 Euro-Palettes with a loadinghight of 1500mm max 80 crates with 400 x300 x300mm L x B x H dimensions: widht: 2450mm height 2678mm lenght: 2050mm chamber dimensions widht: 2066 mm height: 1795 mm lenght: 1340 mm Thickness of Insulation 40mm Electronic Regulation of Pasteurizationprocess: Kdjdeclq Ixepfx Anysn Adjustment of heatingspeed (depends also on capacity of the steamboiler) Adjustment of pasteurizationtemperature Adjustment of required holdingtime on Pasteurizationtemperature Adjustment of switch-off temperature electronic Datalogger for Pasteurizationtemperature and Chambertemperature Aircirculation by High effective Stainless Steel Airblower Steaminjection in the Airchannel for opimized steammixing pneumatically actuated Steamvalve Kondensateoutlet on the bottom of the Chamber DN 100 4 pcs. adjustable Feets Steamconsumption: approx.:. 80 kg / H at 1 bar electric power consumption: 5,5kW weight: approx. 650 kg

Year of construction: 2009, operating hours: 550 h, condition: used, Preinstalled mobil complete system inclusive impeller juice pump, high efficient boiler, heatexchanger and automatic temperature control. Components: Ksdsclttpspfx Anysdn Model on 2 fixed roller for heavy loads and 2 steering roller 41kW WOLF gas boiler Hot water circulation pump Expansion vessel Automatic temperature control plate heat exchanger Liquefied gas version incl. gas bottle holder and gas pressure regulator Capacity 500l juice per hour Dimensions (LxWxH): 1450x980x1700mm Weight: approx. 468kg

Year of construction: 2020, condition: new, Preinstalled mobil complete system inclusive Impeller juice pump, high efficient gas-boiler, heatexchanger and automatic temperature control. Components: Model on 2 fixed roller for heavy loads and 2 steering roller 160 kW Wolf gas boiler Hot water circulation pump Expansion vessel Automatic temperature control Stainless steel (1.4401) plate heat exchanger Liquefied gas version incl. gas bottle holder and gas pressure regulator Capacity 2000l juice per hour Weight approx. 1000kg Kdedpecl Shvjfx Anyen

Year of construction: 2025, condition: new, To pasteurize cold filled bottle or glasses. The filled closed bottle or glasses are posed in the water tank, then the tank is filled with water. The pasteurize process is fully automatic based on adjustable temperatur and heat holding time. Nominal power: 50 pcs. 1l bottles/h Kodpfx Anjc Rw Aasysdn Heating power: 2x4,5kW Electrical connection: 400V/ 16A/ 5pol Dimensions: (lxwxh) 1160x780x1100mm Weight: approx. 90kg

Condition: excellent (used), Year of construction: 2015, working width: 3,000 mm, total height: 1,000 mm, cutting height (max.): 10 mm, The ATOM FlashCut EASY 888 L30 plotter is an advanced digital knife cutting machine designed for precise and rapid cutting of a wide range of materials, including leather, textiles, foams, and plastics. It is especially valued in the footwear, leather goods, and technical gasket/component manufacturing industries. ⸻ 📐 Technical Specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Key Features • Versatility: The plotter enables cutting of various materials, from soft leathers to rigid plastics. Kedpfoy D Sa Dox Anysdn • Ergonomics: Its compact and ergonomic design ensures ease of operation and space savings in the production facility. • Vacuum system: The dual-zone vacuum system ensures stable material hold during the cutting process. • Cutting head: Supports various tools, including oscillating knives and crease tools, enhancing production flexibility. ⸻ 🏭 Industrial Applications The ATOM FlashCut EASY 888 L30 plotter is used in: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising materials production ⸻ 🛠️ Additional Information The L30 model is particularly recommended for companies seeking a solution that combines high cutting precision with production efficiency. With the ability to process large material formats and support multiple cutting tools, this plotter is suitable for both serial manufacturing and individual project tasks.

Condition: excellent (used), Year of construction: 2008, The ATOM FlashCut 3010 plotter is an advanced digital knife cutting machine designed for precise and fast cutting of a wide range of materials, such as leather, textiles, foams, and plastics. It is particularly valued in the footwear, leather goods, and gasket/component manufacturing industries. ⸻ 📐 Technical specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Main features • Versatility: The plotter enables cutting of various materials, from soft leathers to hard plastics. • Ergonomics: Compact and ergonomic design ensures easy operation and space-saving installation in production facilities. • Vacuum system: Dual-zone vacuum system ensures stable material hold-down during cutting. Kdedpsy D E R Nsfx Anyon • Cutting head: Supports multiple tools, including oscillating knives and creasing tools, providing greater production flexibility. ⸻ 🏭 Industrial applications The ATOM FlashCut EASY 3010 plotter is used for: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising material production ⸻ 🛠️ Additional information The 3010 model is especially recommended for companies seeking a solution that combines high cutting precision with production efficiency. Thanks to its ability to process large-format materials and support for various cutting tools, this plotter is suitable for both serial production and custom projects.

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 Kdodpfx Aou Edhujnysn - Working width 1.300mm - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW Kdsdoxfkbaopfx Anyjn - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: new, Chamber Pasteurizer, MultiPas, for 2 pallets, NEW, designed for processing Euro pallets with Euro and NRW crates, entirely stainless steel, insulated and clad with stainless steel sheet, condensate drain, single-leaf hinged door, immediately available. Kodjwhx A Tepfx Anysdn We manufacture chamber pasteurizers - for 1 to 8 pallets - for beverages with and without CO2 - with wing door or lifting door Feel free to contact us with your specific requirements!

Condition: used, functionality: fully functional, input voltage: 380 V, electrical fuse: 16 A, nominal power at 50% duty cycle: 4 kVA, continuous power (apparent): 6 kVA, We offer this used IDEAL BAS 20 butt / flash welding machine, year of construction unknown, for sale. Type: BAS 20 Serial number: 18292 Nominal power at 50% ED: 4 kVA Connection power: 6 kVA Idle voltage: 2.8-4 V Maximum upsetting force: 0.25 Mp Welding thickness (steel): 3-50 mm Primary voltage: 380 V Frequency: 50-60 Hz Fuse rating: 16 A Kdodpfxjx Saxdo Anyon Number of steps: 5 Available April 2026 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2016, Marel labeling machine Ksdpfxjxnkh So Anyjdn - Concept 500 - Top labeller

Condition: new, capacity 750 l/h heater capacity 70 kW electrical power 1,1 kW electric outlet 400V 50Hz (three-phase) fuse 16 A dimensions: length 1 165 mm Kdsdpfx Aoyw Hu Aenyen width 795 mm height 1 805 mm weight 463 kg Gas consumption liquid gas approx. 5.5 l/h Gas consumption natural gas approx. 7.5 m³/h Max. exhaust temperature: 210°C

Condition: used, This listing is for a Thermo Orion EZ Flash II Kdjdpfxoxzhr Uj Anyon

Condition: used, Year of construction: 2001, Chamber pasteurizer, manufacturer: Rico, type: 4.5, for 4 Euro pallets 800x1200 mm in crosswise orientation—2 pallets side by side and 2 rows one behind the other, steam heated, made of stainless steel, insulated, featuring: - automatic control valve and steam vent - 2 fan motors/fans on top - upward-opening lifting door with SEW drive - integrated control cabinet with controller and recorder for protocol/logging. Kodpfjwhxq Dex Anyedn Condition: used, cleaned, inspected

Year of construction: 2026, condition: new, Continuous pasteurizer electric with preheating of the juice in the coaxial tube heat exchanger They use available low-cost energy (e.g. from solar, heat pump, biogas, tec.) although the temperature level is not sufficient for pasteurization. The rest of the temperature increase to pasteurization level is done electrically (with less energy requirement). The components: Preheating: * Coaxial tubular heat exchanger (KRWT) with thermal insulation (max. 60kW) thermal * Mixing unit incl. circulation pump ensures a stable inlet temperature of the heating water Continuous pasteurizer electric: * Electric heater 13.5 / 18 / 27 / 31.5 kW - 400 V * Tank (stainless steel) 150 ltr. with thermal insulation with stainless steel tubular heat exchanger Kodpfx Aouadm Donyodn * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump Pasteurizer mounted on chassis Simple operation Total capacity up to 1100 liters per hour ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: new, Year of construction: 2026, Container 150 l thermally insulated with 13.5 kW /400 V heating with automatic temperature switch-off, rack, bag-in-box filling device with bag holder * simple, safe, optimum price-performance ratio * no temperature fluctuations * absolutely gentle heating due to large heating surface of 0.4 m² * with thermostat: switches off when temperature is reached * Height-adjustable stainless steel frame - the container runs completely empty "Free time" during the heating time approx. 40 min. for 150 ltr. Hourly output approx. 150 ltr. also available with 18 kW /400 V heating - hourly output 180 ltr. 2-digit bottle filling available Kdsdpst U H Nrofx Anyjn You do not have a 400V connection? Container pasteurizer is also available with gas condensing boiler. ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump Kodpfx Anst Uzitoyedn * Chassis with holder for low temperature safety device and pump ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! Kedpfxet Hfygj Anyodn * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 100 kW * Hourly output up to 1,350 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Empty weight approx. 320 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Kdodpfx Anot Hfyajysn Technical data: * Boiler output 80 kW * Hourly output up to 1,100 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Unladen weight approx. 280 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 60 kW * Hourly output up to 850 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 140 cm * Empty weight approx. 230 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use Kjdpfx Anjt Hfx Asyedn