Used Flat-Bed Die Cutter for sale (15,043)

Year of construction: 2026, condition: new, DM Flat Conveyor Belt Type FB-700 without substructure for bulk material conveying Conveyor belt length: 6,000 mm Belt width: 650 mm Fabricated from structural steel, laser-cut, bent, and welded Base frame powder-coated in RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time. Carrier roller system on the return strand, shaft Ø60/15 mm Roller station spacing approx. 500 mm (custom options possible) Closer roller spacing in load area Drive drum + tail drum made of S235 steel, welded and machined Ø220x700 mm crowned, shaft fixed with pillow block bearings. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Connection 400 V, 50 Hz, protection class IP54 Dusdpfsyhznhsx Afnjn Drive supplied prewired to motor terminal box (Commissioning must be performed by a qualified electrician) Motor mounted on right side in direction of transport, pull configuration. Bearing points equipped with robust UCF flange bearings incl. grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile, 17 mm high x 650 mm wide Joint section without profile, endlessly hot vulcanized

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction Duedpfx Afsyhzhzjnsn - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Dusdpfx Aeyhzhuefnsn Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. Dujdpfx Afsyhzhnenon The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: new, Year of construction: 2026, Aluminum incline conveyor with substructure including leveling feet and machine feet for compensating uneven floors - Feed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Continuous removal plate 2.0 mm galvanized Drive roller + return roller made from S235 steel, welded and machined Ø150x620 mm crowned, shaft fixed with pillow block bearings. Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm endless high-frequency welded with stepped joint Dsdpfxsyhzhbs Afnoun Belt material: 2-ply, especially cross-stable 2 pcs wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the belt edge 14 pcs T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted Belt material: 2-ply, especially cross-stable Due to the wave profiles on both sides, the usable belt width is reduced: Usable width 500 mm, calculated as follows: (Top view) Crosswise arrangement 50+500+50 mm

Condition: used, functionality: unexamined, Stone Cutter 2.7M Bridge Mounted High 600mm Dia. Speed Saw. Max Capacity 200mm. 1,200mm x 1,200mm Rotary Table on 4.5M Ground Rails Dsdpfxeyb Tdwe Afnsun

Condition: used, Year of construction: 1980, control panel Boschert Stanze Year 1990 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Dujdpsx U A H Nefx Afnon Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, maximum load weight: 30,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2017, Year of construction: 2017, Equipment: ABS, * Kraker CF-ZL 200 Moving Floor * Lift axle * SAF axles * 92 m³ capacity Duedpeyg S I Esfx Afnsn * LED lighting * Tarp * 10mm floor * Remote control * Air suspension 1st owner!!! Very good condition Give us a call! Want to visit us? We offer free pick-up from the train station in 98544 Zella-Mehlis. For an additional fee, we take care of all customs and registration formalities. We can also deliver vehicles to the port for an extra charge. What about your used vehicle? Please bring your used vehicle with you – we are happy to take it in part exchange. We will quote you the price immediately. Subject to errors, mistakes, changes and prior sale. If a foreign currency is stated, the current daily exchange rate applies. The currency of the vehicle location is valid.

Condition: new, axle configuration: 3 axles, total length: 125,000 mm, total width: 24,800 mm, suspension: steel, tire size: 315/80 R 22.52, color: white, Year of construction: 2024, The 3-axle flatbed trailer from CIMC is a robust and versatile solution for transporting large, heavy, or irregularly shaped loads. Featuring three axles, this trailer offers exceptional stability and load capacity, which is essential for hauling building materials, machinery, containers, and other heavy cargo. CIMC is renowned for its innovative designs and reliable products, and the 3-axle flatbed semi-trailer is no exception. Specifications: - Number of axles: 3 axles for additional stability and increased payload. - Payload capacity: Up to 60,000 kg for a wide range of applications. - Chassis: Constructed from high-quality steel for maximum strength and durability. - Body: Flat deck without raised edges. - Suspension: Mechanical or air suspension systems for a smooth ride and improved load distribution. Features and Benefits: High payload capacity: - The 3-axle configuration ensures excellent weight distribution and increases loading capabilities. - Ideal for heavy and bulky cargo such as construction equipment, containers, and industrial machinery. - Durable construction: The chassis is manufactured from premium-grade steel, providing durability to withstand demanding daily operations. - Advanced welding technology guarantees a robust and dependable structure, significantly extending the trailer’s service life. Applications: The CIMC 3-axle flatbed semi-trailer is ideal for multiple applications, including: - Construction: Transport of heavy building materials, machinery, and equipment - Logistics and distribution: Hauling containers, pallets, and irregular loads - Oil and gas industry: Transport of heavy and oversized equipment - Automotive industry: Delivery of vehicles and large machinery Dujdpfxjyf Dl Ho Afnen Dimensions: L. 12,500 mm W. 2,480 mm H. 1,200 mm Weight: 8,400 kg +/- 5% This 3-axle flatbed trailer by CIMC offers a rugged and flexible solution for businesses requiring a versatile and dependable trailer for transporting heavy and irregular cargo. Excellent stability, durability, and the ability to adapt to specific requirements make this trailer a valuable asset to any fleet. For export outside the EU only. = Additional information = Year of manufacture: 2024 Tire size: 315/80 R 22.5 Suspension: Leaf suspension Gross vehicle weight: 68,400 kg

Condition: used, Various remote controls for mobile screening plants EXTEC/SANDVIK Track Control Handset Track Handset Manual Handset Dujdpoxz Ez Tsfx Afnjn Frequency: 418 and 433 Hz / 11 bit

Condition: new, mileage: 1 km, power: 110 kW (149.56 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: air conditioning, = Additional Options and Accessories = - Radio/CD player - Spare wheel - Toolbox = Notes = The Mercedes-Benz Accelo 915 4x2 flatbed truck with drop sides is a compact and versatile vehicle, ideally suited for light to medium-duty transport tasks in urban and regional environments. Its maneuverability, fuel efficiency, and payload capacity make this truck an excellent choice for a wide range of logistics applications. Specifications: - Drive: 4x2 (two driven rear wheels) - Engine: 4.2-litre, 4-cylinder Euro 3 turbo diesel engine with 150 hp / 110 kW and 580 Nm Dusdpeydn Aaefx Afnjn - Transmission: Manual gearbox - Safety: Safety markings and side guards - Comfort: Spacious cab with adjustable seats, air conditioning, and multifunction steering wheel Cargo Bed: - Type: Flatbed with drop sides (foldable side panels for easy loading and unloading) - Dimensions: Body length from 5 to 6 meters, depending on configuration - Payload: Up to 4.5 tonnes, depending on load and specification - Material: Aluminum flatbed frame for maximum load capacity - Ergonomic: Low loading height for convenient loading and unloading Options and Customization: - Bed options: Additional lashing eyes and securing points for cargo - Safety: Reflective safety markings and side guards Applications: - Logistics and distribution: Suitable for goods delivery in urban areas - Agriculture: Transport of agricultural products or light machinery - Construction: For transporting building materials such as timber, bricks, etc. - Retail: Suitable for delivering goods to shops or markets Dimensions: L. 7134 mm W. 2148 mm H. 2480 mm The Mercedes-Benz Accelo 915 4x2 flatbed truck with drop sides offers reduced fuel consumption and lower operating costs, thanks to its efficient 4-cylinder turbo diesel engine—perfect for businesses with daily delivery requirements. Its tight turning radius makes this truck ideal for narrow city streets and confined loading areas, making it perfectly suited for urban distribution. = Further Information = Year of manufacture: 2025 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Max. axle load: 3200 kg; steered Maximum rear axle load: 6200 kg Number of cylinders: 4 Engine displacement: 420 cc Gross vehicle weight (GVW): 9,000 kg

Condition: used, axle configuration: 3 axles, first registration: 01/2011, total length: 13,710 mm, total width: 2,550 mm, suspension: air, tire size: 455/40 R 22.5, wheelbase: 9,110 mm, Year of construction: 2011, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 455/40 R 22.5 Axle make: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 45%; right: 45% Rear axle 2: Tyre tread left: 40%; right: 40% Rear axle 3: Tyre tread left: 35%; right: 35% Weights Unladen weight: 6,500 kg Payload: 32,500 kg Dodoydd Aiopfx Afnsun Gross vehicle weight: 39,000 kg Functional Loading platform height: 110 cm Condition Damages: none Identification Registration number: OL-34-GF

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20246801576, load capacity: 20 kg, arm reach: 1,750 mm, controller manufacturer: Universal Robots, controller model: CB5, Equipment: documentation/manual, The Universal Robots UR20 is a collaborative industrial robot with a payload capacity of up to 20 kg and a reach of 1750 mm, delivering maximum performance in a compact footprint. Its compact design, precise motion control, and simple programming make it ideal for demanding automation tasks such as palletizing, machine tending, and welding applications. Duedpsyf Ei Hjfx Afnon Used exclusively in our lab for experience gathering. The robot has never been used in industrial production. Delivery includes control unit and operator panel.

Condition: used, Control panel, injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press -Hydraulic control block comes from: an injection molding machine Dujdpfx Asdx Nvpofnon -Manufacturer: Battenfeld -Dimensions: 380/180/H300 mm -Weight: 17 kg

Condition: used, mileage: 369,231 km, power: 265 kW (360.30 HP), first registration: 07/2009, fuel type: diesel, empty load weight: 10,300 kg, maximum load weight: 8,700 kg, overall weight: 19,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, onboard computer, parking heater, power assisted steering, * Atlas crane foldable behind the cab * Type: TLC 165.2E * Radio remote control * Hook height: 15.60 m * 2.90 m = 4.76 t. * Length: 12.60 m = 780 kg * 10.60 m = 990 kg * 8.60 m = 1,300 kg * 6.70 m = 1,900 kg * 4.80 m = 2,900 kg * Four hydraulic extensions * 2 hydraulic outriggers * Long-distance cab with one sleeper berth * 8-speed split manual transmission * Multifunction steering wheel * Cruise control * Engine brake * Air conditioning * Auxiliary heating Dodpjvhpirjfx Afnjun * Comfort driver's seat, air suspension * Electric windows * Heated electric mirrors * Central lubrication * Working headlights * Steel bumper * Suspension: leaf/air with lifting and lowering * Mounting height: 1,300 mm * Wheelbase: 3,900 mm * GVW: 19,000 kg * Unladen weight: 10,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 288,582 km, power: 310 kW (421.48 HP), first registration: 04/2018, fuel type: diesel, empty load weight: 14,650 kg, maximum load weight: 11,350 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, next inspection (TÜV): 04/2024, brakes: retarder, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 6,500 mm, loading space width: 2,550 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Complete documentation available * Hiab rear crane type 177K Hipro * with radio remote control * hook height 14m * Crane length: 10.8 m = 1.560 Kg. * 8.1 m = 2,100 Kg. * 5.5 m = 3,200 Kg. * 4.2 m = 4,100 kg. * 5th + 6th control circuit * Stone tongs available at an extra charge * 2 hydraulic outriggers * Platform body with high aluminum loading flaps * Screen printing floor * DIN lashing eyes * High bulkhead * Platform dimensions: 6.50 m x 2.55 m x 1 m * Trailer coupling * Gross train weight: 44,000 kg * Automatic gearbox * Multifunction steering wheel * Cruise control * Air conditioning * Retarder * Lane departure warning system * Bluetooth CD radio Dusdpfx Afevhp Egsnen * Comfort driver's seat, air suspension * Heated seats * Electric windows * Heated electric mirrors * Air suspension + raise/lower * Liftable trailing steering axle * Storage box * Rotating beacons * Working lights * Wheelbase: 4,900 + 1,350 mm * Max. gross vehicle weight: 26,000 kg * Unladen weight: 14,650 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, axle configuration: 3 axles, first registration: 04/1996, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,110 mm, Year of construction: 1996, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle make: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Tyre tread left: 45%; right: 45% Rear axle 2: Tyre tread left: 45%; right: 45% Rear axle 3: Tyre tread left: 30%; right: 30% Weights Dedpfxjya Eivs Afnoun Unladen weight: 7,280 kg Payload: 31,720 kg Gross vehicle weight: 39,000 kg Functionality Loading platform height: 120 cm Condition Damage: none Identification Registration number: OD-77-XG

Year of construction: 2025, operating hours: 5 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2025112701, Aluminium incline conveyor with substructure including leveling feet and machine feet for compensating uneven surfaces - Feed height: 500 mm - Inclined section: 4,500 mm - Discharge height: 3,000 mm Design: Aluminium construction - Reinforced triple profile 135x45 mm - Continuous galvanized discharge sheet, 2.0 mm thick Drive drum + return drum made of S235 steel, welded and machined Ø150x620 mm, crowned surface, shaft fixed with pillow block bearings. Drive: Inline geared motor 1.10 kW, belt speed 0.77 m/sec Connection: 230/400 V, 50 Hz, protection class IP54 Drive pre-wired up to terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm Endless high-frequency-welded with stepped joint Belt material: 2-layer, particularly cross-stable 2 pcs. corrugated sidewalls, 80 mm high, 50 mm wide, edge-aligned, high-frequency welded 18 pcs. T60 cleats, 430 mm long, spacing approx. 508 mm, centrally welded on Belt material: 2-layer, particularly cross-stable Due to the corrugated sidewalls on both sides, the usable belt width is reduced: Usable width: 500 mm, as follows: (Top view) Transverse arrangement: 50 + 500 + 50 mm Dedeydb Rwopfx Afnoun

Condition: new, PRICE: 5000 EUR Pillar lift for cutter cart Made of stainless steel Lifting weight: 250 kg Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Dedpfx Ajvtz U Rsfneun Voltage: 380V 50Hz

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Dujdpfx Afovtzzkjnjn Electrical power: 0.75kW Voltage: 220V 50Hz

Condition: new, PRICE: 320 EUR Cutter cart Made of stainless steel Dimensions: 600x600x500mm Duedpfx Afsvt Aicsnjn Volume: 200 liters

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, tire size: 13R22.5, axle configuration: 8x8, wheelbase: 3,600 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, Year of construction: 2023, = More options and accessories = - Leaf spring suspension = Remarks = Dodpfx Afjvpqhrjnjun Model year: 2023 Damage: none = Company information = Van Vliet Automotive Trading - Your Truck Partner A wide range of new trucks, trailers, 4x4s and machines. Ready to use immediately! Our own (design) workshops, modification center and paint shop guarantee you a fast and project-appropriate processing of your order, anywhere in the world. ISO and AEO certified. Logistical processing and customs/export facilities. Worldwide spare parts service. International mechanic and training team operating on site worldwide to provide technical support and training. Contact our experienced, multilingual team of account managers now for professional, project-specific and competitive advice. = More information = Gearbox: TipMatic 1228OD, automatic Year of manufacture: 2023 Model year: 2023 Tire size: 13R22.5 Suspension: leaf spring Number of cylinders: 6 Engine displacement: 10,512 cc GVW: 41,000 kg Damage: none = Company information = WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported with careful after sales services, such as supplying parts and providing (local) trainings. WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported with careful after sales services, such as supplying parts and providing (local) trainings.

Condition: used, axle configuration: 3 axles, color: other, Year of construction: 2004, Empty weight: 5.580 kg Axle 1: left 4 mm right 5 mm Axle 2: left 6 mm right 13 mm Axle 3: left 13 mm right 12 mm We have the possibility to stack trailers!  Djdpfxemmbtie Afnjun

Condition: used, axle configuration: 3 axles, first registration: 08/2013, color: other, Year of construction: 2013, Empty weight: 7.100 kg Axle 1: left 8 mm right 9 mm Axle 2: left 8 mm right 9 mm Axle 3: left 7 mm right 7 mm Dsdjw Uhzkspfx Afnjun We have the possibility to stack trailers! 

Condition: used, axle configuration: 3 axles, first registration: 06/2009, color: other, Year of construction: 2009, Empty weight: 7.300 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm Dujdpfjwv Trrex Afnen We have the possibility to stack trailers!