Used Flat-Bed Die Cutter for sale (14,634)

Condition: good (used), Year of construction: 2013, control Siemens 840D sl Ijdjv Nw Npspfx Ap Dsih turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: ready for operation (used), functionality: fully functional, Alpina mod PBV 330 cutter capacity 330 liters stainless steel bowl, lifter for meat bins, very good condition and prepared for vacuum. Iijdpfxoxmh Sls Ap Doh Dimensions: 300 x 220 x 160 cm

Condition: like new (used), Year of construction: 2019, Weight 6250 kg Size 5810 × 2545 × 2445 mm Design Table clamping area 1500 x 600 mm Max. table load 1300 kg Longitudinal table movement 1600 mm Table groove (number/width) 3/ 16 mm Table feed 7 – 25 m/mm Iijdpfx Apevwdhho Dsh Min./Max. Distance spindle nose-table max. 600 mm Handwheel pitch vertical 0.002 mm Handwheel revolution vertical 0.5 mm Automatic grinding feed 0.002 – 0.02 mm Vertical rapid traverse (Y-axis) 230 mm/min Cross travel 660 mm Cross feed per stroke 0.1 – 12 mm Cross rapid traverse 1250 mm/min Handwheel pitch transverse 0.02 mm Handwheel revolution transverse 5 mm Grinding spindle motor 7.5 kW Grinding spindle speed 1450 rpm Grinding wheel 355 x 50 x 127 mm Hydraulic motor 3.7 kW

Year of construction: 2025, condition: new, functionality: fully functional, NFM L200IV 200L universal mixer Model L200IV Cutter / Mixer / Homogenizer is following the footsteps of our experience in the industrial food processing equipment for producers of consumer products worldwide. Integrating our patents and knowledge; we created a machine with industrial capacity and durability with the ease of use of a counter-top appliance. The L200IV allows our customers to increase process capacity without increasing labour needs. Only one person is enough to operate this machine regardless of body-power. The tilting of the bowl and opening-closing of the cover is fully motorized and works automatically. The machine is operated via a hybrid control panel, offering water-proof metal buttons and a control screen. The timer, the variable speed function, the optional reverse revolving function, the cover and tilting mechanism controls are all integrated into this panel. There is a custom designed stair to reach the feeding level of the bowl and control the operation. The optional motorized scraper works automatically. The scraper shortens operation times, and increases productivity. Operator safety is at maximum. The Cutter machine does not start if it does not detect the bowl or the cover in place. There are multiple systems, to ensure safety and avoid mechanical problems. Besides these, there are multiple systems to avoid overloading of the motor units of the machine. All these systems ensure protection against abusive use and overload, protecting your investment for years to come. The high-level discharge height is designed for standard Euro-bin (200 Liters) containers. Please ask your sales consultant for an optional custom made tilter for loading the machine, instead of manual loading using the custom designed stairs. Vacuum option for the process bowl is available. Vacuum pump is completely integrated inside the machine construction, concealed and hygienic. The control of the vacuum function is fully integrated in the machine’s automation systems for full control of recipes and automatic operation of the machine. Power 22Kw, 600-3000RPM, removable bowl, dishwasher safe, ideal for cutting, mixing homogenizing, grinding, chopping, emulsifying, products such as hummus, sauces, soups, pastes, pates, purees, and more, 3Ph Iiodevw Ug Uopfx Ap Doh

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, table width: 420 mm, table length: 1,200 mm, spindle mount: MK 4, total height: 2,310 mm, total width: 1,900 mm, total length: 2,650 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, workpiece weight (max.): 405 kg, quill travel distance: 150 mm, power: 6 kW (8.16 HP), Equipment: rotational speed infinitely variable, Type control: Heidenhein 150 System resolution: 0,001 mm Documentation for machine Isdpfx Ajunhy Sop Deih

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3 - axis digital readout Heidenhain original condition !!! Technical data: Iodpju Nvxmofx Ap Djih >> Machine no. 56560/08 Year of construction approx. 1975 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1,5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> S20x2 tightening system >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device About the machine : We offer a universal milling machine Deckel FP1 in very good original condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the lids on site under power.

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: M08L/8623, Offer Number: M08L/8623 Machinetype: 4 die - 3 blow transfer header Info: PKO Make: ESSEBI Type: RCF 36-R Constr. year: 1993 diameter range: 3,8 - 6,5 number of dies: 4 number of stations: 4 cutting length: 52 mm shaft length under head: 6-35 mm Iiedpfx Apjwi Swmj Dsh output - pieces/min: 250 press power: 55 to Location: In our warehouse

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8328, Offer Number: M08L/8328 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: RH60 Constr. year: 1988 diameter range: 8,5 mm number of dies: 2 number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm output - pieces/min: 200 press power: 30 to Ijdowi S Aiopfx Ap Djih Location: In our warehouse

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: M08L/8065, Offer Number: M08L/8065 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO Iisdpfx Apowi S I Ee Dsh Make: MALMEDIE Type: K64 Constr. year: 1981 diameter range: 16-30 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 235 mm shaft length under head: 180 mm output - pieces/min: 90 press power: 380 to Location: In our warehouse

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08L/7162, Offer Number: M08L/7162 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off Make: HILGELAND Type: CF5AZ Constr. year: 1979 diameter range: 8-16 mm number of dies: 2 number of stations (incl. cut off): 4 Iijdpfx Apowi Tavs Djh cutting length: 160 mm shaft length under head: 130 mm output - pieces/min: 100 Location: In our warehouse

Condition: used, machine/vehicle number: 007393, Max width workable: 2500 mm Isdpfx Apjwkrqis Dsih

Condition: excellent (used), Year of construction: 2008, = Further information = Year of manufacture: Aug. 2008 Model year: 2008 Unladen weight: 5,100 kg Payload: 39,800 kg Iiodjx It Hgopfx Ap Dsh Gross vehicle weight: 44,900 kg Technical condition: Very good Optical condition: Very good Please contact Arne Honingh for more information.

Year of construction: 1968, condition: ready for operation (used), AUTOPLATEN BOBST SP 1260 E / AUTOMATIC FLATBED DIE-CUTTER STRIPPING / Year Of Production: 1968 / Max. Sheet Size: 1.260 x 920 mm / Min. Sheet Size: 500 x 350 mm / Maximum Speed: 5.000 Sheets Per Hour / Max. Solid Board Thickness: 1,5 mm / Max. Corrugated Board Thickness: 3 mm / Maximum Cutting Pressure: 500 Tons / Weight: 19 Tons / Main Dimensions: 6.075 x 2.840 x 2.200 mm Iodpfx Apex R R R Uj Deih

Condition: used, Year of construction: 2005, Technical details: spindle passage: 54 mm z-axis: 900 mm turning length: 900 mm swing diameter: 560 mm facing movement (x-axis): 290 mm control: Simens Sinumerik 840D sl spindle turning speed - continuous: 0 - 6000 U/min diameter of main spindle: 120 mm max. torque on the spindle: 190 Nm tool turret: Typ Sauter number of tool tapers: 12 operating pressure: 5 - 6 bar quill stroke: 130 mm diameter of quill: 110 mm rapid traverse: 40 - 50 m/min total power requirement: 37,5 KW weight of the machine ca.: 8,0 t dimension machine approx.LxWxH: 4,8 x 2,4 x 2,3 m Iiedpfx Asy Ttyqop Dsh • Modular machine design for efficient 2-axis and 4-axis shaft machining as well as chucking part machining • Equipped with pick-up spindle • High basic accuracy and thermal stability as prerequisites for hard turning and precision machining • Prepared for automatic loading and unloading via gantry loader or integrated loading system • Separable machining area for simultaneous two-stage machining on the left and right main spindles • Lowerable tailstock can be combined with a counter spindle • Supports in-process and post-process measurement strategies *

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment Iisdpfx Aszqnxtjp Djh 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M08E/9141, Offer Number: M08E/9141 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off Make: PELTZER-EHLERS Isdpoy Dc H Uofx Ap Doih Type: GB30-4 Constr. year: 1977 diameter range: 16 - 30mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 260 mm shaft length under head: 225 mm output - pieces/min: 60-80 press power: 450 t Location: Europe

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M08E/9110, Offer Number: M08E/9110 Machinetype: 2 die - 3 blow transfer header Isdpfxeyya Rpj Ap Deih Make: NAKASHIMADA Type: NP80 Constr. year: 1992 diameter range: 10 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 150 press power: 60 t Location: Europe

Condition: like new (used), Year of construction: 2018, operating hours: 500 h, functionality: fully functional, LAGUN BM4RT Bed Milling Machine Manufacturer: Lagun Type: BM4RT Year of manufacture: 2018 Iedpfxjzmpyds Ap Deih Condition: operational, used, like new Operating hours: 1650 h Spindle hours: 438 h Control system: Heidenhain iTNC 640 Video available. Further information upon request.

Condition: excellent (used), Year of construction: 2003, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, spindle speed (max.): 4,000 rpm, table width: 1,200 mm, table load: 4,000 kg, table length: 3,860 mm, mount diameter: 50 mm, total height: 3,640 mm, total width: 4,500 mm, total length: 8,900 mm, rotational speed (max.): 4,000 rpm, workpiece weight (max.): 4,000 kg, overall weight: 24,000 kg, FIBRO indexing rotary table 800 mm Closed covered machine with doors for easy acces Indexing head 2.5 x 2.5 Degrees Automatic lubrication Double chain chip conveyor Under power 1e owner machine X - Travel: 3500mm Y - Travel: 1200mm Z - Travel: 1400mm Table Length: 3860mm Table Width: 1200mm Table load: 4000 Table Ø: 800mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 30kW Speeds / ranges: 4000Rpm ATC / revolver: 30 Number of controlled axis:3 + 1 Chip conveyor: Yes Coolantsystem: Yes Isdpezl Afdsfx Ap Doih Length: 8900mm Width: 4500mm Height: 3640mm Weight: 24000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 2,500 rpm, Heidenhain TNC 407 control unit Table: 2000 x 700 mm Iiedpfxozbrkpj Ap Dsh Travel: 2000 x 800 x 800 mm Spindle: SA 50 Maximum spindle speed: 2500 rpm Weight: 10000 kg

Condition: good (used), Year of construction: 1991, functionality: fully functional, CNC sinker EDM machine MAHO HANSEN, Type: HS 500 E, Year of manufacture: 1991, with electrode changer (without electrode holders) and accessories. Control system: EROCOM 20 (Heidenhain). Technical data: see data sheets. From a toolmaking department; all documentation available, in good condition. Iiedpfezcmansx Ap Deh

Condition: used, Year of construction: 2002, x-travel 3000 mm y-travel 1600 mm z-travel 1500 mm table-size (2x) 2000 x 2000 mm control TNC 430 B spindle turning speed range 60 - 3600 U/min Iiedpfxszrpnre Ap Dsh spindle taper ISO 50 feeds mm/min table load 10 t milling drive 28 kW total power requirement 48 kW weight of the machine ca. 47 t dimensions of the machine ca. 6,5 x 3 x 3 m control: Heidenhain TNC 430 B digital. Machine has 6 axes controled, X/Y/Z, C- axe table rotation and A/B axes for universal head. Machine has a 40 position ATC, cooling through spindle, a chip conveyor, an adaptable high speed spindle (30.000 rpm) and two pallets in the pallet changer. Machine in program 22.347 hours.

Condition: used, 125 x 20 x 35 mm Z4 Iedszrx Sgepfx Ap Dsih n max. 9,000 rpm MECH

Condition: used, 140 x 58 x 50 mm Iiedozrx Syopfx Ap Doh

Condition: used, Technical data: - Blade: WP Z2 V2 - Flight circle (ø): 161 mm Iisdpfxozryfze Ap Deh - Bore: 50 mm - Length: 15 mm - Material: Steel