Used Folder Machine for sale (64,952)

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 250 mm spindle taper MT: MK 4 spindle speed:: 63 - 710 / 8step U/min feed: 0,07; 0,13; 0,254; 0,42 mm/U Distance spindle/table max.: 600 mm table clamping surface:: Ø 450 mm table rotating: 360 ° clamping table - swivable: ja Grad drill table adjustment: 600 mm column diameter: 215 mm total power requirement: 2,2 kW weight of the machine ca.: 730 kg dimension machine xH: 1,0 x 0,58 x 1,4 m Equipment: Quick-action drill chuck RÖHM Supra 16mm Coolant tank with pump Socket for 220V Kedpfowcygcsx Ap Dsdu *

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1250 workpiece height max.: - mm distance column till spindle centre: 1250 mm drill head horizontal traverse: 980 mm vertical adjustment of arm: 800 mm distance table - lower edge spindle: 2,05 x 9,2 x 2,85 mm spindle taper MT: MK4 bore spindle stroke: 280 mm range of revolutions per minute - continous: 28-1.195 3 Steps U/min swivel range of the arm: 90 Grad feed: 0,1/0,2/0,3/0,4/0,8/1,2 6 Steps mm/U column diameter: 300 mm base plate surface area: 1.370 x 750 mm weight of the machine ca.: - t dimension machine xH: 2,05 x 9,2 x 2,85 m Cooling water system with feed Table with clamping surface 1,370mm x 750mm Kdedpfx Aowid Auop Deu incl. drilling cube *

Condition: used, Technical details: Kodpewid Uwefx Ap Dsdu bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *

Condition: used, Technical details: plate thickness: 1 mm Kdjdpswq I U Refx Ap Dsu distance between columns: 2,255 mm bending angle max.: 130 ° total power requirement: 2,25 kW Weight approx.: 1250 kg dimension machine xH: 2,7 x 1,15 x 1,3 m Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is missing manual operation O.K. No backgauge *

Condition: good (used), functionality: fully functional, Year of construction: 2022, Electric bending machine in good condition, with automatic back gauge. Specifications: Model: SCHRÖDER MAKU Year: 2022 Kjdpey Ucycefx Ap Dedu Made in: Germany Working length: 3,200 mm Bending thickness: 1.5 mm Bending beam tooling: 10 and 25 mm Controller: Classic bend Motor: 2.5 kVA Weight: 2.7 tons If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 1976, Technical details: x-travel: 815 mm y-travel: 400 mm z-travel: 410 mm range of revolution per miute: 67 - 2300 / 8ste U/min feed continuous: 0,04; 0,08; 0,2 mm/U quill stroke vertical: 130 mm spindle taper: SK40 spindle head: drehen: 90° links/rechts spindle head: ausfahrbar: 315 mm spindle head swivable left - right: 40° vor / zurück ° distance spindle nose and table: max. 450 mm distance spindle center to column: min./max.: 170 / 600 mm table surface area: 1120 x 255 mm total power requirement: ca. 1,17 kW weight of the machine ca.: 1100 kg machine dimensions LxWxH: ca. 1,7 x 1,6 x 2,2 m dimensions of hydaulic: L: 550 x B: 330 x H: 800 mm Kdjdpfx Apeu R Uk Re Deu Machine table feed 15 - 230 mm/min. via 12 steps Equipment: Sauter workpiece holder with 2 stations (Ø 125 mm and Ø 32 x 26 mm journals), hydraulic operation Coolant system Control panel; hand crank *

Condition: used, Technical details: table height: 800 mm table rotating: 360 ° table: 800 mm height over floor: 940 mm temperature: max. 450 °C electrics - voltage/frequency: 220/50 V/Hz total power requirement: 1,1 kW Kjdpfx Apeu Nu E Ss Djdu space requirements of the machine approx.: T:0,8xB:1,0xH:1,6 m With this machine can be packed parts respectively shrink-wrapped. There is a table with 4 stations on the machine. Can be purchased together with vaccum welding machine. i.D. *

Condition: used, Brushing machine / brush deburrer - make Lindemaier, year 1990, power consumption 7,5 kW, dimension: L:1,0 x W:0,80 x H:1,25m, weight approx. 48 kg - brush size Ø 300 x Ø 50x50mm type K 180 - engine speed 2920 rpm, suction nozzle Ø 180mm - with blow-off device Accessories: approx. 15 spare brushes NEW Kjdpfxou Nu Rne Ap Dsdu *

Condition: used, Technical details: x-travel: 500 mm y-travel: 200 mm z-travel: 300 mm spindle taper ISO: MK 4 quill stroke vertical: 60 mm spindle head swivable left - right: 45° ° Distance- spindle nose to clamping surface: min./max.: 50 / 350 vertical mm throat: vertical 250 mm table clamping surface:: 710 x 200 mm table swivable approx.: 45° rechts/links turning speed range: 50 - 2 240 / 24 step U/min feed:: 25 - 1 120 / 24 step mm/min total power requirement: 3,2 kW weight approx.: 1390 kg dimension machine xH: 1,7 x 1,5 x 1,7 m - spindle center distance / clamping surface vertical: min/max: 50 / 350 mm - spindle nose / clamping surface horizontal: min/max: 0 / 350 mm - travel range of the milling bar 600 mm - without counterholder - incl. machine vice Kjdpfx Aou Nc Uujp Djdu *

Condition: used, Technical details: x-travel: 200 mm y-travel: 450 mm z-travel: 460 mm control: Siemens 802S base line spindle taper ISO: ER 32 spindle head swivable left - right: nein ° turning speed range: 150 - 8600 U/min feed:: X/Y/Z: 2000 - stufenlos mm/min table surface area: 750 x 210 mm interface: 232 total power requirement: 3 kVA weight approx.: 760 kg dimension machine xH: 1,9 x 1,2 x 2,1 m Kjdpfeu Ndcaox Ap Dedu Table movement: X-axis: 200mm and Y-axis: 450mm spindle vertical Z-axis: 460mm max. tool holder milling cutter: Ø 20mm drilling capacity ST: Ø 13mm max. distance spindle-table: 470mm Equipment: Manual control unit cooling system central lubrication machine interior lighting Machine feet *

Condition: used, Technical details: sheet width: 153 mm material thickness: 1,5 mm Number of Straightening rolls: 4x oben/upper/ariba Number of Straightening rolls: 5x unten/lower/abajo throughput speed: 180 m/min total power requirement: 7,5 kW Weight approx.: 0,543 t space requirements of the machine approx.: L:1,6xB:0,8xH:1,22 m Kdodpfx Apeu Ic Eks Dju Inside of the machine is a coil taper integrated, whcih can be adjusted via threaded spindle. description: - upper roll : width:160mm, dia. approx. 40mm, not driven, via manual adjustment - lower roll: width: 160mm, dia. approx. 40mm, fixed, not adjustable, driven - coil taper: max. dia.=1000mm, max. width 153mm, max. weight 500kg *

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 16 mm throat: 250 mm bore stroke: 125 mm spindle taper MT: MK 2 spindle speed:: 350 - 2000 / 8step U/min table clamping surface:: 280 x 355 mm table rotating: ja ° drill table adjustment: 520 vertical mm distance table - lower edge spindle: max. 600 mm column diameter: 110 mm total power requirement: 1,1 kW weight of the machine ca.: 272 kg Ksdpfx Apsu Idhme Djdu dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: -Drill chuck 13 mm -twist drill 10 mm with 45° countersunk cut -machine vice *

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. * Kdodju Idkzopfx Ap Dju

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm y-travel: 405 mm z-travel: 405 mm measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) * Kjdpfx Apsu S Izce Djdu

Condition: used, Technical details: Ksdpfx Apsva Hige Dodu bore capacity in steel (diameter): 30 mm throat: 260 mm bore stroke: 160 mm spindle taper MT: MK3 feed steps: 0,1; 0,2; 0,3 mm/U und manuell spindle speed:: max. 1800 stufenlos U/min Distance spindle/table max.: 750 mm table clamping surface:: L: 280 x B: 355 mm table rotating: nein ° clamping table - swivable: 360 Grad drill table adjustment: vertikal: 600 mm column diameter: 130 mm threading: Nein / no total power requirement: 1,1 kW weight of the machine ca.: 570 kg dimension machine xH: 0,9 x 0,9 x 1,9 m This machine has 2 tables. Drilling table LxW: 370 x 500 mm Attachment table: LxW: 420 x 750 mm Clamping surface = 320 x 600 mm, transverse displacement (X-axis) 250 mm possible Ejection of tool via ejector wedge accessories: vice machine base *

Year of construction: 1992, condition: used, Technical details: voltage: 380 V/Hz sizes from - to: Ø 6 bis Ø 50 mm total power requirement: 1,5 kW weight of the machine approx.: 293 kg dimensions of machine: 690 x 380 x 1150 mm Application: Assembly of hose lines Process: pressure-controlled pressing with assembly tools Hydraulics 240 bar overpressure, capacity/capacity for 20 liters Electro-hydraulic drive Operation ON/OFF switch and foot control Kodpfx Aevc Atgop Djdu Machine is currently equipped with jaw set DN 12 16 (code 220) Further jaw inserts available: DN 6 - 10 (code 215) DN 20 - 25 (code 230) DN 32 (code 240) DN 40 (code 245) DN 50 (code 260) without code: DN 21; DN 22; DN 33; DN 34; DN 35; DN 37; DN 39 *

Condition: used, Year of construction: 1991, Technical details: grinding length: 600 mm grinding width: 375 mm workpiece height: 375 mm max. table load: 300 kg grinding range: 350 - 600 mm Table dimensions: 900 - 350 mm magnetic plate size: 600 x 350 mm Kdjdpfx Ajxu D Husp Dou dimensions of grinding wheel: 300 x 50 x76,2 mm mm total power requirement: 12 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,3 x 2,6 x 2,4 m dimension coolant device LxWxH: 0,8 x 0,8 x 0,8 m -Longitudinal table stroke = 700mm -transverse travel of table = 800mm Coolant pump *

Condition: used, total width: 2,700 mm, total height: 2,900 mm, total length: 1,700 mm, Year of manufacture: 2003 Colour: White Empty weight: 3.000 kg - Year: 2003 - CE marking present: Yes - Serial number: 0312101 - Drive system: Conventional - Wet/dry: Dry - Number of stations [pcs]: 1 Kdsdpfx Aezkkd Sep Deu - └ Station type 1: Abrasive belt - Power [kW]: 32 - Max. working width [mm]: 550 - Transport dimensions: 1700mm x 2700mm x 2900mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,800 mm, total height: 1,400 mm, total width: 2,250 mm, Year of manufacture: 1972 Colour: Green Empty weight: 2.000 kg Price: On request - Year: 1972 - Control: Conventional Kodjzm N Rispfx Ap Dsdu - Transport dimensions: 1800mm x 2250mm x 1400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,500 mm, total length: 7,500 mm, total width: 3,700 mm, Year of manufacture: 2005 Colour: Grey Empty weight: 9.600 kg Price: On request - Year: 2005 - Documentation available: Yes - CE marking present: Yes - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens Kdsdpfxezkudce Ap Dsu - Power [kW]: 24.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 2000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 550 - C-axis rotation [°]: 360 - Table length [mm]: 2600 - Table width [mm]: 550 - Tool holder: ISO40 - Main spindle power [kW]: 22 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 12000 - Positioning accuracy [mm]: 0.01 - Travel speed [mm/s]: 667 - Options: Tool magazine, Chip conveyor, External cooling - Transport dimensions: 7500mm x 3700mm x 2500mm (l x w x h) - Transport weight [kg]: 9600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Stud welding machine, stud welding compact system, stud welding machine, stud welding, stud welding system Kdodpez Tfbiefx Ap Dsu -Manufacturer: Köco, stud welding machine -Type: 902 E -Power: 200 - 900 A -Accessories: Welding cable, ground cable (see photos) -Dimensions: 590/300/H510 mm -Weight: 81 kg

Condition: used, operating hours: 11,517 h, total height: 2,880 mm, total length: 10,000 mm, total width: 2,700 mm, Year of manufacture: 2014 Colour: White Empty weight: 6.000 kg - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Main motor power [kW]: 10 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes - └ Motor power [kW]: 3.6 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Safety mat, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - └ Oil free: Yes - CNC documentation available: USB stick Kedpfx Apox E Uk Uj Djdu - Table length [mm]: 5150 - Table width [mm]: 1600 - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Transport dimensions: 10000mm x 2700mm x 2880mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Year of manufacture: 2022 Colour: Grey Empty weight: 4.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Kedpfx Aszwul Hjp Dsdu These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of manufacture: 2014 Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes Kdjdox Hwhxspfx Ap Dou - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, Edge banding machine Manufacturer: IMA Type: Advantage 60 Year of manufacture: 2008 Technical data - Feed speed: 16 m/min - Workpiece thickness: 8 - 60 mm - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Edge thickness: 0.3 - 8 mm - Edge height: 12 - 65 mm - Edge length: 160 - 350 mm - Joint milling unit - Air blow nozzle for removing loose particles - Workpiece preheating - Glue application unit - Cross-cutting saw unit - Multi-function milling unit for milling and rounding corners - Profiling blades - Cleaning agent spray system (Riepe) - Surface finishing blades - Brush unit - Groove milling unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding. Kdedpfxez Tf E Ue Ap Deu