Used Fz 37 for sale (3,338)

Condition: defective spare-parts repository (used), functionality: not functional, controller manufacturer: Siemens, table width: 470 mm, table length: 990 mm, overall weight: 5,500 kg, spindle speed (max.): 10,500 rpm, No reserve price – guaranteed sale to the highest bidder! Note: The machine is defective. The control system does not power up, so it requires repair or can be used as a source of spare parts. Otherwise, the machine is in good mechanical condition. TECHNICAL DETAILS Spindle speed: 10,500 rpm Bwjdpfx Aney Ni Ago Uer Table length: 990 mm Table width: 470 mm MACHINE DETAILS Control manufacturer: Siemens Machine weight: 5,500 kg

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M Bodequhbgjpfx An Uewr serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: excellent (used), Year of construction: 2012, ALUP ALLEGRO 37 10 screw compressor, machine with inverter after service Technical data: capacity: 6.06 m3/min; Bsdow Awiuepfx An Uewr motor: 37 kW; maximum pressure: 9.5 bar; year: 2012; hours: 12,321 h; compressor fully functional, with warranty.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 18,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 38 Nm, overall weight: 65,000 kg, Initial commissioning: 2012 Bedpfx Asyrdc Ejn Uswr Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with 18H12 T-slots / 250 mm spacing 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power consumption: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided access doors - 10-position tool changer Optional at extra cost: - Wireless probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Condition: excellent (used), Year of construction: 2020, Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles. Built and first use in 2020. The spindle was replaced in June 2022 and currently has 4500 operation hours. Machine is in very good condition and it can be inspected under power upon appointment. Availability: on request Bwjdpfxjyt I Uhs An Uer Including: Chip conveyor (scraper type) Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm Coolant system TPF 350 / FKA 900 Coolant through the spindle Fixed 3D probe Type TS 27 R – RENISHAW Renishaw RLP40Q probe system Cnc control SIEMENS 840D X-axis 730 mm Y-axis 400 mm Z-axis 425 mm Maximum spindle speed 15,000 rpm Maximum torque 140 Nm Drilling capacity Ø 42 mm Thread tapping M30 Tool magazine capacity 20 tools Tool taper DIN 69893 HSK A63 Maximum tool diameter 65 mm Milling capacity 500 cm³/min in E355 steel Full technincal specifications in the attached document. Optional: ARMIN automatic robot cell (2024)

Condition: used, Electric Motor AC Motoren GmbH Type AOM 225S-4 400/690V 50Hz 37 kW 1475 RPM 440 60Hz 44,4 kW 1770 RPM 228A Bedpfx Anodcb U Ts Uowr IP55

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Bwedpfx Ansuhf Tzs Uer Working width max. 4300mm throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: used, axle configuration: 2 axles, loading space length: 110,500 mm, loading space width: 25,100 mm, loading space height: 10,000 mm, Year of construction: 2009, Equipment: ABS, = Additional Options and Equipment = - EBS - Electronic Braking System - Rear air suspension - Front air suspension = Notes = For vehicle inquiries, please contact Mr. Seidel (by phone at CY NV 1214/20T/37). Crane: Palfinger 44002, radio remote control, support legs middle and rear, pallet tongs, additional spotlights: vehicle rear, crane, air suspension, BPW axles, drum brakes, Tridec steering, both axles steered, central lubrication system, handbrake crank, cargo space dimensions: length 11,005 mm, width 2,510 mm, height 1,000 mm, tire tread depth: 1st axle: 10–12 mm, 2nd axle: 11 mm. If desired, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be pleased to assist you. For further information, please visit our homepage. ... Subject to errors, changes, and prior sale !!! Bjdpfx Aeyfp H Njn Uswr Steering axle = Further Information = Unladen weight: 16,320 kg Payload: 20,680 kg gross vehicle weight (GVW): 37,000 kg Please contact Tobias Ebert for more information.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 194-03, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 450 mm, table length: 2,280 mm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 400 mm Travel Z-axis: 425 mm Total number of axes: 3 Table length: 2,280 mm Table width: 450 mm Number of T-slots: 3 T-slot spacing: 150 mm T-slot width: 18 mm Spindle speed: 10,500 rpm Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent slots: 180 mm Max. tool length: 220 mm Max. tool weight: 8 kg MACHINE DETAILS Control: SIEMENS SINUMERIK 810 M Connection: 50 Hz 3x 400 Volt Spindle motor: 18 kW Total power requirement: 31 kVA Bwodpfx Aeyhnfcon Ujr Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,010 x 3,040 mm Machine weight approx.: 7,200 kg EQUIPMENT Coolant system Chip conveyor Electronic handwheel

Condition: excellent (used), Year of construction: 2006, operating hours: 14,300 h, functionality: fully functional, machine/vehicle number: 414-46, Year 2006 with Fanuc Series 18i-MB5 Bwjdpfx Anjxqmwbo Uer Country of manufacture: CE - Germany Net machine weight: 3,400 kg Dimensions: 185x259x250 cm TECHNICAL SPECIFICATIONS Travel X / Y / Z: 450 / 270 / 310 mm Acceleration X / Y / Z: 0.7 / 0.7 / 1.0 g Rapid traverse X / Y / Z: 40 / 40 / 60 m/min Spindle speed max.: 15,000 rpm Tool interface: HSK A 40 Milling capacity in St 60: max 60 cm3/min Drilling capacity in St 60: max Ø 16 mm Threading: up to M12 Tool magazine / positions: 24 – special version with 40 on this machine Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.2 sec 5-axis version NC rotary tilting table: +/- 100° Rotary plate diameter: 100 mm Grid drill pattern: M6 x 50 mm 4th axis speed: 40 rpm 5th axis speed: 60 rpm Direct measuring system for 4th and 5th axes: +/-20’’ / +/-20’’ Distance spindle nose – table surface: 170 – 450 mm Maximum workpiece weight: 6 kg Technical information is provided without engagement and subject to errors or omissions.

Condition: used, mileage: 627,027 km, power: 213 kW (289.60 HP), first registration: 01/2016, fuel type: diesel, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, total length: 11,980 mm, total width: 2,980 mm, total height: 2,500 mm, Year of construction: 2016, Equipment: ABS, air conditioning, fog lights, power assisted steering, traction control, = Additional options and accessories = - Climate control - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Sun visor Bedpfoy Hw U Eox An Ujwr - Tachograph = More information = Engine capacity: 6.871 cc Make of engine: MAN

Condition: used, mileage: 552,767 km, power: 213 kW (289.60 HP), first registration: 07/2016, fuel type: diesel, number of seats: 39, gearing type: automatic, emission class: euro6, color: red, brakes: retarder, total length: 11,980 mm, total width: 2,980 mm, total height: 2,500 mm, Year of construction: 2016, Equipment: ABS, power assisted steering, traction control, = Additional options and accessories = Bwsdpfxjy Hv Tys An Uor - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Sun visor - Tachograph = More information = Engine capacity: 6.871 cc Make of engine: MAN

Condition: used, mileage: 831,146 km, power: 213 kW (289.60 HP), first registration: 12/2014, fuel type: diesel, number of seats: 38, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, total length: 11,980 mm, total width: 2,980 mm, total height: 2,500 mm, Year of construction: 2014, Equipment: ABS, air conditioning, fog lights, power assisted steering, traction control, = Additional options and accessories = - Adjusted for handicapped - Climate control - EBS Bedpsy Hvvzofx An Ujwr - Electrically operated mirrors - Heater - Hydraulic power steering - Sunroof - Tachograph = More information = AdBlue system: Yes Engine capacity: 6.871 cc Make of engine: MAN Tyre tread remainder on axle 1: 50% Tyre tread remainder on axle 2: 50% Number of microphones: 1

Condition: used, mileage: 789,465 km, power: 213 kW (289.60 HP), first registration: 12/2014, fuel type: diesel, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, total length: 11,980 mm, total width: 2,980 mm, total height: 2,500 mm, Year of construction: 2014, Equipment: ABS, air conditioning, fog lights, power assisted steering, traction control, = Additional options and accessories = - Climate control - EBS - Electrically operated mirrors - Heater Bodpfoy Hvfcex An Ujwr - Hydraulic power steering - Sun visor - Tachograph = More information = Engine capacity: 6.871 cc Make of engine: MAN Tyre tread remainder on axle 1: 60%

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 2,750 kg, total height: 2,470 mm, total length: 2,000 mm, total width: 1,530 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. XC series mills are designed for grinding both soft and hard plastics Stainless steel housing and bearing lubrication system will ensure quiet and stable operation Each model is equipped with an ammeter Versions with cyclones are available Control cabinet on Simens components Before purchase possibility of tests on customer's material. If you have any questions, please contact us at the e-mail address or telephone number provided. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 500 Bodpfx Asrbg Dton Uewr Rotor width (mm): 720 Power (kW): 37 kw Knives on rotor (pcs): 27 Fixed knives (pcs): 4 Weight (kg): 2750 Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Year of construction: 1985, condition: ready for operation (used), A conventional milling machine Zimmermann including a Heidenhain digital display is available. Table dimensions X/Y: 1400mm/800mm, tool holder: SK40, travel X/Y/Z: 1600mm/900mm/300mm, spindle-table distance range: 30mm-1180mm, milling head swivel: 45°/90°, feed rate: 2400mm/min, speed: 2800rpm. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/3150mm, weight: approx. 5000kg. Documentation available. An on-site inspection is possible. Bwsdoy Eqtpopfx An Uer

Year of construction: 1985, condition: ready for operation (used), A conventional lathe Zimmermann with some modification measures is available. Turning diameter over bed: 1000mm, turning length: 430mm, distance between centers: 1000mm, 3-support travel: 500mm/300mm/200mm, chuck diameter: 250mm. Documentation available. An on-site inspection is possible. Bsdjy Eqtvopfx An Ujwr

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Bjdpfxjwywcij An Uowr Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Bwsdpovy A Tnofx An Uor Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: used, This listing is for 1 of 2 DiaMed 37 SI ID-Incubators The ID incubator of the DiaMed type 37SI is ideal for bringing different samples in ID cards to a temperature of 37 °C. Bodpfx Anoxzg Eto Uewr

Condition: used, This listing is for a BioRad ID-Incubator 37 S I Bedpfxsxzhimo An Uswr The unit is in full working condition and is ready for immediate use Bio-Rad Laboratories ID-Incubator 37 S I is designed for use in diagnostic and research workflows. The ID-Incubator 37 S I is a compact, temperature-controlled incubation system typically used for immunohematology and related laboratory testing procedures. Key features usually associated with this model include: - Maintains a stable incubation temperature around 37°C, which is standard for many biological and clinical assays. - Provides controlled incubation conditions to support reliable test reactions. - Built for compatibility with ID-card or gel-based testing systems commonly used in blood typing and serology labs. - Designed for laboratory environments requiring precise and uniform heating

Condition: used, power: 109 kW (148.20 HP), Year of construction: 2007, operating hours: 7,455 h, Equipment: all wheel drive, cabin, * Deutz TTV 1145 Kommunal mit Rückfahreinrichung + Drehsitz * 7455 Betriebsstunden * 50 km/H Ausführung * Fronthydraulik * Frontzapfwelle * gefederte Vorderachse * Kommunalanbauplatte * 7 x hydr Anschlüsse vorne * Druckluftanschlüsse 1 und 2 Kreis * 2 x Rundumlicht * Arbeitsbeleuchtung vorne und hinten * EHR * Zapfwelle 540/1000 * Ausstellfenster vorne und hinten * 11 x hydr Anschlüsse hinten * Oberlenker hinten Bodpfxsy Ab I Uj An Uowr * Schlitten für höhenverstellbare AHK * Reifen 480/70R28 BKT ca. 90% * 580/70R38 BKT ca. 90% * deutsches Fahrzeug * Behördenfahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: new, Year of construction: 2026, Sliding saw Robland FZ 400 EL Voltage 400V Three-phase main saw motor S6 4 kW (3x400V) Scoring machine motor power 0.75 kW Bsdpfx Aslk Duaon Uswr Z4 anodized sliding table 420 x 3200 mm Cutting length 3500 mm max. saw blade (without equipment) 400 mm, max. 350 mm with scorer Graduation 120 x 20 mm (without dial) Cutting height 90°: 125 mm, 45°: 90 mm Cutting speed 4000 RPM Weight 780 - 880 kg

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1216, total width: 4,000 mm, total length: 4,500 mm, total height: 1,150 mm, overall weight: 2,600 kg, compressed air connection: 6 bar, pressure: 6 bar, cutting length (max.): 3,700 mm, VSG cutting table M 37 incl. support Cuts from 6-16 mm Pneumatics new, heating lamp new, felt new, machine comes with a service contract! If interested, we can also provide additional pictures and videos. Bwedpjxg Ii Rsfx An Ujr

Condition: ready for operation (used), Year of construction: 2013, Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000mm, weight: approx. 42000kg. The Geiss machine with the year of manufacture 2013 has spindle problems. A cost estimate is available for this. The repair can be carried out before the sale or by the buyer. Documentation available. An on-site inspection is possible. Individual sale possible. Bwedpfx Aney Ant Rj Uor