Used Gas Generator for sale (13,814)

Year of construction: 1988, condition: used, Price: On request VAT/differential taxation: VAT deductible = Company information = For further information, you can reach us on weekdays from 8:30 AM to 5:00 PM and on Saturdays from 10:00 AM to 3:00 PM by phone. Fjdpfx Afjxr Ef Henefu You can also email us at: See you soon!

Condition: good (used), Year of construction: 2005, laser hours: 4,029 h, laser power: 2,000 W, We are offering a TRUMPF TCF1 generator and resonator. These components come from a portal 3D laser. The system was fully functional until it was dismantled 24 months ago. Since then, the components have been stored in a heated area. Fodpev Ic Sajfx Afnefu

Condition: excellent (used), Gas tank on pallet for oxygen, argon, nitrogen, carbon dioxide, CO2, LNG, LOX, LAR, LIN Volume 2 m3 working pressure 20 bar Fsdpjvyf Unefx Afnjfu vacuum isolation We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information about other vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Ffsdpfx Aoxfrv Esfnsu Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Fjdod Spx Dopfx Afnsfu Glasbeek finish Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1990, Aurepa gas tank semi trailer for oxygen, nitrogen, argon cryogenic Technical Information: Fjdoittfnepfx Afnjfu Working pressure: 3 bar Pump: yes Flowmeter: yes We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us via e-mail.

Condition: excellent (used), Year of construction: 2004, Gofa semi-trailer cryogenic for nitrogen, argon, oxygen, LIN, LOX, LAR. Year: 2004 Working pressure: 3 bar Volume: 12000 L We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide. Fjdpfx Aferk Na Asnofu We will be glad to answer your questions via phone and e-mail

Condition: used, functionality: fully functional, mileage: 27,000 km, power: 400 kW (543.85 HP), gearing type: automatic, fuel type: gas, color: grey, overall weight: 800 kg, Year of construction: 2011, operating hours: 27,000 h, machine/vehicle number: MAN E2876 LE 302, E2876 LE 301, Gas CHP (Combined Heat and Power) units, 2 x 195 kW electrical, 2 x 255 kW thermal, fuel consumption 51.6 m³/h. Ffedjw D A Ryjpfx Afnju

Year of construction: 1998, condition: used, We offer used gas tanks with a capacity of 4850 l, 16 bar. Price for one piece including loading. Pressure vessel, iron tank. Fsdpjhzblkefx Afnsfu

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Ffedpfxow U N Dao Afnou

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Fedpfx Aoxdfa Usfnofu Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Ffedpfx Asxdfazsfnju Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Fjdpfxertryke Afnsfu Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Fjdpfxexaqa So Afnjfu Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Fedpjruakgofx Afnofu Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Little used 11.6 MW Condensing Steam Turbine Generator, TGM Kanis Turbinen GmbH, 2017 Reported to have less than 100 operating hours due to project cancellation. Includes turbine, synchronous generator, auxiliaries, and controls. Turbine Manufacturer: TGM Kanis Turbinen (Germany) Type: CT32-54 Condensing Steam Turbine Year: 2017 Live Steam Conditions: 43 bar @ 398 °C Exhaust Conditions: 0.064 bar @ 38 °C Power Output: Max continuous 11,615 kW Speed: 7,200 rpm Generator Manufacturer: Elin Motoren Type: HTM290E04, synchronous generator Rating: 14,631 kVA Voltage: 11,000 V Current: 768 A Frequency: 50 Hz Enclosure: IP54 Weight: 30,600 kg Year: 2017 Auxiliaries Voith Turbo I/P Converter Type: DSG-B07143 Supply voltage: +24 VDC Input pressure: 8 bar Output pressure: 2–5 bar Sirocco Cooling System Type: 2x16 KDL-E-50-2-1850-2-1.8 Motor power: 253 kW Air flow: 29,664 m³/h (65/35 °C, 2x0.065 kPa) Ffodpjyhc Tusfx Afnsu Water flow: 2×25 m³/h (25/29 °C, 10 kPa) Pressure: 10–15 bar Controls Turbine control system included. Turbine was intended to be fed by boiler (not included in sale) with steam production capacity of 52570 kg/hour.

Condition: used, Unused methane fed 1025 kW Caterpillar 3516 STD generator set made in 1993 with only 12 hours of use in factory tests. Rated 1025kW, 1281 kVA, 1500 RPM, 50 Hz. Ffodpjyhc Rmofx Afneu

Year of construction: 2015, condition: excellent (used), Type: DUAL-PACK 12 Serial number: 152656 P12 Year of construction: 2015 Ffjdpfx Afsqvnpaenou Capacity: 500 kg/24h Refrigerant: R404a Compressor: Copeland Emerson ZB15KCE-PFJ-551 Generator: Geneglace F15 Power: 230VAC, 1Ph, 50Hz Dimensions: 800 x 700 x 700 mm

Condition: good (used), mileage: 195,569 km, power: 250 kW (339.91 HP), first registration: 03/2015, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,320 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 10,500 mm, total width: 2,550 mm, total height: 3,550 mm, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, retarder, traction control, = Other Options and Accessories = - 2nd Diesel Tank - Digital Tachograph - Tachograph (Recording Device) - Fixed - Short Cab - Power Take-Off (PTO) - Pump - Central Lubrication - Additional Brake System = Notes = Number of axles: 3, Configuration: 6x2, Curb weight: 16,105 kg, Gross weight: 28,500 kg, Total tank capacity: 1 liter, 2nd diesel tank, Fifth wheel coupling: Fixed, Number of diff locks: 1, Central lubrication, Suspension type: Air suspension, Cab type: short cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Flashing lights, Engine power: 250 kW (335 HP), Fuel: Natural gas, Euro: 6, Transmission type: Opticruise, Gearbox type: Scania, Gears: 12, Additional brake system, Retarder brand: Scania, Power steering, ABS, ASR, PTO, PTO type: 1, Starter battery, System type: Pusher 4000 OB, Pump, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Drivetrain Fuel type: Natural gas Transmission Gearbox: SCA, 12 gears, automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Tire tread left: 3 mm; Tire tread right: 3 mm Axle 2: Twin tires; Tire tread left inside: 9 mm; Tire tread left outside: 11 mm; Tire tread right inside: 7 mm; Tire tread right outside: 7 mm Axle 3: Lift axle; Steered; Tire tread left: 2 mm; Tire tread right: 5 mm Weights Unladen weight: 16,105 kg Payload: 12,395 kg Gross vehicle weight: 28,500 kg Functionality Pump: Yes Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 2 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Fair prices • Reliable business practice • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of 'recognizable quality' • And more... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Ffodoxqxabepfx Afnou Calculate your leasing rate and submit a request directly on our website. Ask about our European warranty package.

Condition: used, Year of construction: 1976, cone distance min./max. 0/108 mm Ffjdpsyh Rmtjfx Afneu Pitch angle min/max 5°/84° Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm speeds: 98-286 weight of the machine ca. 6577 kg dimensions of the machine ca. 1560 x 2140 x 2200 mm Equipment/accessories: -Cutting tools -Spacer angle -Technical documentation

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Fedpfxeyh Rmmo Afnofu Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor -Technical documentation

Condition: used, current intensivity 140 A plate thickness 1,5 mm welding range CO2: 35 - 225 A welding range 30Ar+CO2: 30 - 250 A weight of the machine ca. ca. 90 Kg dimensions of the machine ca. 0,4 x 0,8 x 0,8 m Ffodpexbtmdsfx Afnju

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) - Configuration: 20‑cylinder, spark‑ignited gas engine - Fuel: Natural gas - Year: 2013 Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA Fedpfx Afsygx Tzenjfu - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW - Year: 2013

Condition: used, New Diesel Generator Set, Power Generator, Emergency Generator DAEWOO Model DAGFS 100 New, unused Rated Power: 100 kVA Continuous Power: max. 80 kVA Standby Power: 110 kVA / 88 kW Rated Current: 33 Amp. Voltage: 400/230 Volt, 50 Hz 230 Volt, 50 Hz Fuel Consumption: 135-liter tank capacity for up to 8 hours of operation at 75% load Fuel consumption at 75% load: approx. 16 liters/h Fuel consumption in standby: approx. 7 liters/h Drive Engine: Diesel inline engine RICARDO type R6105AZD Engine Power at 1500 rpm: 100 kW Engine Power at 1800 rpm: 110 kW Tank Capacity: 135 liters - Simple and compact design with sound-insulated metal enclosure - Forklift pockets for easy and safe forklift handling - 3x CEE 16 Amp sockets (3-pin, 230 Volt) - 1x CEE 32 Amp socket (5-pin, 400 Volt) - Terminal blocks for cable power connection to external consumers, e.g. construction site power distributor - ATS module for mains backup operation, automatic emergency power switchover in case of power failure - 2 starter batteries, 12 Volt, for 24 Volt starter Ffodpfx Afex Srv Ijnou Required space: L x W x H 2700 x 1050 x 1430 mm Weight: 1400 kg Brand new machine from stock

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 652 h, load capacity: 5,000 kg, lifting height: 4,040 mm, free lift: 670 mm, fuel type: gas, mast type: simplex, construction height: 2,890 mm, fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 8,000 kg, total length: 4,540 mm, drive type: Treibgas, construction width: 2,200 mm, Sideloader Load center of gravity: 700 Fork width: 170 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 8.25-15 Rear tires type: Superelastic Rear tires size: 8.25-15 Description: In addition to this Hubtex model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, would be happy to advise you in detail about this S50G. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. Fork positioner, Heating, full cab, Ffedpfowd Uw Esx Afneu Platform height: 930 mm