Used Gate Fold Buckle Plates for sale (16,970)

Condition: used, floor-plate length 1050 mm Nkjdpfxsu Sbfks Afzot floor-plate width 1050 mm floor-plate height 60 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 1050x1050x0,1 m table plate of PFSU 1600, Ø 1050 mm

Condition: used, length 400 mm Nksdjd Iha Rjpfx Afzot width 270 mm weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4x0,27x0,03 m

Condition: ready for operation (used), total length: 2,700 mm, total width: 750 mm, total height: 1,000 mm, empty load weight: 1,420 kg, nominal power: 2.2 kW (2.99 HP), conische buiging met geharde rollen met gemotoriseerde backroll Nkjdjxzvp Ujpfx Afzst Number of rolls: 3x Roll capacity cold: 1550 x 6 mm Roll dia upside: 140 mm

Condition: ready for operation (used), Directe aandrijving; 2 aangedreven rollen Conische buiging Geen fundering nodig Automatische drukbalans tussen boven- en onderrol Automatische smering De onderste rol kan worden versteld door middel van druk of positie. Number of rolls: 4 Nksdpfxox Enfxj Afzot Roll capacity cold: 3100 x 20 mm Roll dia upside: 370 mm Pre-bending: Yes

Condition: excellent (used), Year of construction: 2012, Ref:11059 . 2012 MBO T800/444-RU Folding Machine. Max. sheet size: 82 x 115 cm 16 page+ B1 high speed folding machine with ability to be run by single operator. Nksdpfox U Dc Sjx Afzjt Equipped with: R800 Round pile continuous feeder Vacu-Infeed for mark free and smooth sheet running Vacu-Alignment MC-Control electronic sheet monitoring including total & batch counting. Combi plates & Pre-slitter shafts on 1st & 2nd units Eye-level control panel FA 46ME presser/stacker/marker delivery Folding sequence: 1st buckle unit 78cm with 4 plates 2nd mobile buckle unit 78cm with 4 plates 3rd 'U' mobile buckle unit 56cm with 4 plates - returns sheet to feed position.

Condition: excellent (used), Year of construction: 2011, Ref:11058 . 2008 MBO B30C/644 Folding Machine Excellent condition, very well maintained. Equipped with: R760 - Low profile round pile continuous feeder Automatic total and batch counter Buckle plates with swing-away deflectors Sound hoods to all units Eye-level control panel Folding sequence: 1st buckle unit 76cm with 6 plates 2nd mobile buckle unit 76cm with 4 plates 3rd mobile buckle unit 38cm with 4 plates SBAP-24ME Press Stacker Nsdpfex U A E Eex Afzjkt Specification: Minimum Sheet Size: 150mm x 180mm Maximum Sheet Size: 760mm x 1270mm Mechanical Speed: 180 m/min

Condition: ready for operation (used), empty load weight: 19,000 kg, nominal power: 33.526 kW (45.58 HP), Boven- en onderrol worden aangedreven (planetaire tandwielkast) Conische buiging Automatische gelijktijdige balancering Onderste rol excentrische balk Nkedex Dd Hyjpfx Afzot Number of rolls: 4 rolls - 2 roll driven Roll capacity cold: 3100 x 32 mm Roll dia upside: 410 mm Dia under roll - side rolls: 370 - 300 mm

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button Nsdpfsycxgmsx Afzekt - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: used, Year of construction: 2008, Folding machine MBO K 800.2/4 S KTZ Year: 2008 Description: - 16 page folder Nedoychztopfx Afzokt - MBO Navigator Feeder - Round pile feeder: R 800 Folding unit MBO K 800.2/4 S KTZ - Parallel fold unit with 4 buckle plates - Second cross fold to the left / right - Noise hood over the entire folding section Excluding delivery

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Nsdpfxotq I Rqo Afzokt Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m².

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, perforated plate Nedjb A Nbnjpfx Afzjkt -Dimensions: 2280/1060/40 mm -Table height: 960 mm -with supporting ribs -Cast iron plate -Weight: 1050 kg

Condition: used, total length: 7,300 mm, total width: 1,800 mm, total height: 1,550 mm, Empty weight: 6.000 kg Price: On request Max. working width: 6050mm Max. thickness: 1.5mm Max. opening: 250mm Max. angle: 180gr Number of adjustable angle-sequences: 8 With cutting device on back-side - Documentation available: No - CE certificate present: No - Serial number: 425 - Control: Conventional - Motor power: 4.5kW - Transport dimensions: 7300mm x 1800mm x 1550mm (l x w x h) - Transport weight [kg]: 6000kg Nksdpfx Afew Evdiszet - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, tank capacity: 6,050 l, GENERAL Equipment: Crane lugs Nsdpfxsyckt Ss Afzokt Design: Rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet reinforced (see photos) Overall width: 1,070 mm Overall height: 2,550 mm Overall length: 3,250 mm Heating/Cooling: available Location: Bremen Volume: 6,050 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last intended use: wine storage TANK Support type: feet Number of feet: 4 pieces HEATING/COOLING JACKET Internal temperature control: Cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material (temperature control system): V2A 1.4301 (AISI304) Feet material: Stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Nkodpeyckt Eefx Afzot Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Nkodpfx Afeycktrozet Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Year of construction: 2008, condition: good (used), Item: D-7802-APV-Heat Exchanger Stainless Steel Heat Exchanger Type APV H17, Temperature max. 110 C From 2008. Njdpfx Afjf Srmzezekt Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind Nkodpfxov Syyvj Afzet cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), functionality: fully functional, Year of construction: 1993, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, cutting length (max.): 3,050 mm, motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Nodpfxsv Tk Efe Afzekt Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Nkodpfxehtq N Ne Afzst

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Scope of delivery includes: 01x Locking bracket, used Material color: Sendzimir galvanized Leg "A": approx. 35 mm Leg "B": approx. 53 mm (support surface, see description) Incl. spacer block (grey) Internal dimension "C": approx. 22 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 0.120 kg Note: Thanks to the included spacer block, the Z-bracket can be used for various beam widths from 40 to 60 mm! Quick overview / Application area: - Without block for beam width 60 mm (e.g., for INP) Nkedpjpgndgsfx Afzst - With block (small side inside) for beam width: 50 mm (INP or box profile) - With block (large side inside) for beam width: 40 mm (INP or box profile) General information about the item: This item is available for pickup only. Additional shipping or transport services are subject to extra charges, which can be provided upon request depending on the delivery location and quantity.

Condition: new, The SBS E 2540/1,5, a manual folding machine from KNUTH, is a robust and reliable option within the Folding Machines category, specifically designed for the Manual Folding Machines group. With a working length of 2,540 mm and the capacity to bend metal sheets up to 1.5 mm thick, this machine excels in precision bending for long sheets, making it ideal for producing small series thanks to its adjustable angle stop. Its heavy-duty construction ensures durability, while the segmented upper tool allows for increased bending options. Additionally, the SBS E-series machines feature a manually adjustable rear gauge as an optional enhancement to further streamline operations. Whether you are considering installation, safety features, or the right accessories for your projects, the SBS E 2540/1,5 stands out in sheet metal processing. To enhance your workshop capabilities, request a quote now! Nkjdeu E Infjpfx Afzot

Condition: new, The KW 100 Folding Machine from KNUTH is a robust angle bender designed for the manual bending of flat, round, and square steel parts. It features a sturdy design that allows for screw-mounting on a workbench, allowing for infinitely variable bending stop adjustments to suit your needs. With an eccentric quick-clamp, the KW 100 streamlines operation, enabling bending angles up to 120 degrees. For enhanced precision, it includes a bending angle read-out, ensuring high repeatability. With a bending capacity of flat steel reaching 100x5 mm, this machine is ideal for repair shops and metalworking applications. The standard equipment includes various essential tools such as an angle stop, bending plates, and a bending lever. You can rely on the performance of the KW 100 when looking for a competent Folding Machine suitable for diverse bending tasks. Order online today and experience the reliability of our Folding Machines in your metalworking projects. Nodeuxdd Nepfx Afzokt

Condition: used, Year of construction: 2009, Technical details: Nkjdpfx Afsybbz Dezet sheet width: 3000 mm plate thickness: 6 mm stroke: 102 mm back gauge: 1000 mm total power requirement: 11 kW dimensions of the machine ca.: 3900x1950x1700 mm weight of the machine ca.: 5650 kg

Condition: used, machine/vehicle number: 71xxxx, Year of construction: 2006, operating hours: 14,486 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 20519 Specifications: - 2006 model - 14486 hours - Certified to: 12/25 - 224 kW - 15600 kg - Tires (see pictures) - Heater defective - Articulated steering - Central lubrication - 6x6 - Serviced by myself - Locking device - Speedometer defective - Lights - Air conditioning - Radio - Ready for delivery Nkjdpfx Afowph Dpezot Description: We have a 2006 Moxy MT26 w/ white plates for sale. There is a defective heater and speedometer. Apart from this, everything works as it should according to the owner. Services have been performed by the owner continuously. Ready for delivery HK: 304 Hours: 14486 Own weight: 15600 Total Weight: 45500 Year controlled: Yes Year controlled until: 12/25 Width: 275 Length: 949 Kw: 224 CE: Yes Model: MT 26

Condition: good (used), Year of construction: 1992, Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm Nkedpsyanqvjfx Afzot -Weight: 2000 kg