Used Gate Fold Buckle Plates for sale (19,143)

Condition: used, Year of construction: 2006, operating hours: 14,486 h, CE mark: yes Serial number: 71xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20519 Specifications: - 2006 model - 14486 hours - Certified to: 12/25 - 224 kW - 15600 kg - Tires (see pictures) - Heater defective - Articulated steering - Central lubrication - 6x6 - Serviced by myself - Locking device - Speedometer defective - Lights - Air conditioning - Radio - Ready for delivery Description: We have a 2006 Moxy MT26 w/ white plates for sale. There is a defective heater and speedometer. Apart from this, everything works as it should according to the owner. Services have been performed by the owner continuously. Ready for delivery HK: 304 Hours: 14486 Own weight: 15600 Total Weight: 45500 Year controlled: Yes Year controlled until: 12/25 Width: 275 Length: 949 Kw: 224 CE: Yes Dksdpfxewph Dpo Agdsg Model: MT 26

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Excellent condition machine, cleaning technology, disinfection portal for entry and exit, three-phase connection, lightly used. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Dkodpsxy N A Sofx Agdjg

Year of construction: 2024, condition: new, LOT of 5 knife gate valves from the brand STAFSJO Model MV D50 / 2" Maximum pressure: 16 BAR Dedpfx Aoxv Ac Rsgdjkg Brand new, never installed

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Braun resaw Type CH6B-70, year 1972 Swing frame without width adjustment with splitting wedge Saw tensioner - hydraulic side pressure, year 1989 Round timber transverse conveyor with 4 strands, approx. 7 m long, year 1980 Round timber singulator with 5 strands, approx. 1.40 m long, year 1980 Mayerhofer carriage Type VH with auxiliary carriage, year 2002 Powered resaw roller conveyor, 4 m long, 1.60 m wide, year 1980 Dodpfx Aov I D Ezsgdokg Powered resaw roller conveyor, 1.60 m wide, approx. 15 m long with integrated ejector with 5 strands Transverse conveyor with 5 strands, approx. 6 m long, for side timber, year 1980 Sharpening equipment consisting of: Meinert resaw saw set machine PH4D, year 1967 Vollmer automatic resaw saw set machine AT

Condition: good (used), Plates Size: 520x520x40mm We have 16 plates in the stock Dksdel D Nxkopfx Agdjg Price for one plate 450 eur

Condition: used, 2 clamping plates, 1 pair of clamping bars with T-slots Clamping block, press table, auxiliary table with T-slots Length of each clamping bar: 900 mm Width of each clamping bar: 295 mm Dodsxf Uwlopfx Agdekg Thickness of each clamping bar: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All faces machined Net weight per clamping bar: 240 kg Good condition

Condition: used, Year of construction: 1980, length 3500 mm width 1750 mm thickness of bolster 260 mm number 2 St no. of flutes 6 weight 5 t Dksdpfxjw U Eile Agdog 2 pieces T slotted floor plates with 6 slots, each 36 mm width. All dimensions and price is only for one plate !

Condition: excellent (used), Year of construction: 2008, type of input current: three-phase, input voltage: 400 V, Excellent condition machine, cleaning technology, disinfection portal for entry and exit points, three-phase electrical connection, lightly used. We speak English, German, and former Yugoslav languages. Contact also possible via WhatsApp. Dkedpfxoxy Nxto Agdjg

Condition: good (used), plate size: 3000 x 1500 mm Dksdedm Dw Dopfx Agdeg plate thickness incl. ribbing: 300 mm weight: 3000 kg

Year of construction: 1995, condition: excellent (used), functionality: fully functional, Möhringer gang saw system consisting of: Round log loading station with feeder Hydraulic clamping carriage with auxiliary carriage Möhringer OSS71 gang saw, built in 1995 with width adjustment and Jansen clamp Hydraulic riving knife and cross-cut saw Gang saw roller conveyor Vollmer CnHv gang saw sharpening machine Dodpfxov Uat Uo Agdekg Vollmer AT gang saw setting machine Vollmer PH4D gang saw setting machine

Condition: new, Year of construction: 2025, Set of jaws for Metso LT120, QUARRY TOOTH Fixed jaw MM0521203 18%Mn2%Cr - 2120 kg Swing jaw MM0521201 18%Mn2%Cr - 1875 kg Very good quality castings ALL CASTING CHECKED WITH SPECTROMETER, TO PROOF BEST QUALITY Dsdpfspit Rbjx Agdjkg Price for set EXW Poland, worldwide shipping can be arrange

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. Dsdpfxjvwlqqo Agdokg The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1990, length 8000 mm width 3000 mm number 2 Plate thickness 400 mm weight of the machine ca. ca. 14 t Dkodjv Ey Nqepfx Agdsg dimensions of the machine ca. 8 x 3 x 0,4 m 2 pieces available. Plates does have 10 t- slots in length direction each 32 mm wide.

Condition: good (used), total length: 5,100 mm, total width: 2,250 mm, plate height: 350 mm, Manufacturer: BERTHIEZ Type: Cast iron Year of manufacture: 2000 Specifications Metric US Standard Length 5100 mm Width 2250 mm Height 350 mm Number of T-slots 6 T-slot spacing / step 300 mm T-slot size 36 mm Weight per plate approx. 9800 kg Number of matching pieces 2 Dodpfx Aowp Hiwogdjkg Dimensions (estimates) Length 5100 mm Width 2250 mm Height 350 mm Weight 0 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and as far as possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent representations or contractual conditions. We recommend you check all important details.

Condition: good (used), Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Height adjustable: 320-390mm -Number: 24x Fixators available -Price: piece -Dimensions: Ø 360/H370 mm Dodpfxekahkgs Agdjkg -Weight: 41kg/pcs

Condition: good (used), total length: 4,000 mm, total width: 2,000 mm, plate height: 295 mm, Manufacturer: STOLLE Type: DTS Year of manufacture: 1990 Specifications Metric US Standard Length 4000 mm Width 2000 mm Height 295 mm Number of T-slots 4 T-slot spacing / interval 400 mm T-slot size 42 mm Weight per plate approx. 6000 kg Dodpfowp E Ncjx Agdekg Dimensions (Estimated) Length 4000 mm Width 2000 mm Height 295 mm Weight 6200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, you will not represent or constitute contractual terms. We recommend you verify all important details.

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve shut-off valve type BOA-W Dsdpfx Agsrp Ilhjdekg -Connection: DN32 PN6 -Quantity: 6x valve available -Price per piece -Dimension: 180/120/H230 mm -Weight: 5.2 kg/pc.

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 Dkjdpfxetxkn Ue Agdeg -Pressure force: 60 to -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos -Dimensions: 1470/960/H2140mm -Weight: 1283 kg

Year of construction: 1992, condition: used, Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater Djdpfxjpwngbe Agdskg -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 21kW -Transport dimensions: 490/400/H490 mm -Weight: 30 kg

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 160 -Diameter: 160 mm Dkodpomydmqofx Agdsg -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 5x gate valve available -Price per piece -Dimensions: 530/220/H150 mm -Weight: 4.5 kg/pc.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 180 -Diameter: 180 mm Dsdpfemydmuox Agdskg -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 2x gate valve available -Price per piece -Dimensions: 600/250/H140 mm -Weight: 5 kg/pc.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 300 -Diameter: 300 mm -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 1x gate valve available -Price per piece -Dimensions: 850/360/H200 mm -Weight: 12,1 kg/pc. Djdpfxsmydm Ro Agdokg

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve shut-off valve type BOA-H JL1040 -Connection: DN 15 PN 16 Dedpfx Agsrtcdtjdjkg -Quantity: 1x valve available -Dimension: 130/125/H230 mm -Weight: 3.1 kg/pc.

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve type BOA-H JL1040 without drive -Connection: DN 65 PN 6 -Quantity: 2x valve available -Price per piece Dsdjrp Ik Depfx Agdskg -Dimension: 200/150/H180 mm -Weight: 17.7 kg/pc.

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve shut-off valve type BOA-C JL1040 -Connection: DN100 PN6 Dedpfx Aerp Ik Isgdjkg -Quantity: 2x valve available -Price per piece -Dimension: 210/195/H420 mm -Weight: 14.8 kg/pc.