Used Glue Press for sale (12,770)

Condition: like new (used), Year of construction: 2026, operating hours: 6 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Hsdpjxfwdjfx Amtst Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Production Germany. Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Technical data: Drill diameter: 2-16 mm, Stack height: 50 mm, weight: 300 kg Power supply 380V Hjdjztn D Ijpfx Amtet Automatic drilling cycle, controlled by a foot pedal. Smooth regulation of spindle speed and lowering speed of heads on inverters. Solid construction on a pedestal. Waste is directed to the built-in bin Drill table adjustable in every plane, front and side margins. The set includes operating tools and drills.

Condition: used, Used SCHENK stainless steel filter press with polypropylene plates. Hjdpfxjzun D Re Amtst Manufacturer: SCHENK, Germany Filtration surface: 4,3 sqmt Plates: (29) polypropylene plates and (2) endplates Closed delivery and hand closure

Condition: excellent (used), Year of construction: 2008, pressing force: 200 t, stroke length: 415 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table length: 4,100 mm, overall weight: 17,400 kg, Equipment: CE marking, safety light barrier, High quality, fully serviced, very clean Bystronic 4metre x 200ton cnc pressbrake for sale Complete with extended daylight and stroke Pr200 200 x 4100 Make: Bystronic Model: PR 200 Pressure Reference Year / new: 2008 Total axis:6 – 4axis back gauge X R Z1 Z2 Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 200ton Cnc control: Cybelec Max stroke 415mm Rapid approach 190mm/s Hedjzcw Uvspfx Amtjt Bending cycle 10mm/s Rapid return 150mm/s

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, power: 4 kW (5.44 HP), We are offering this very well-maintained Uniflex HM 325.2i_C.2_FD_MVA hose crimping machine with foot pedal, year of manufacture 2020. Model: HM 325.2i_C.2_FD_MVA Serial number: 60046 Hjdpfx Aoy Apdwsmtot Voltage: 400 V Current: 15/8.5 A Power: 4.0 kW Frequency: 50/60 Hz Year of manufacture: 02/20 Price ex works. The machine must be collected either personally or via freight forwarding. Payment terms: 50% down payment / 50% upon collection – no cash payments! Payment by bank transfer only. Any warranty and liability are excluded. If you have any questions or require more information, please do not hesitate to send us a message.

Condition: used, Year of construction: 2016, General technical data: Machine type: Flexographic printing press Web width: 430 mm Number of colors: 6 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • 3 die-cut stations • 2 gap master units Hedpfjyn Sb Usx Amtst • Delivery: reel or sheet with folding table • 6 UV IVT lamps • Turning bar • Delam/Relam unit – 1 color • 3 sets of sleeves • 6 anilox rollers • 3 magnetic cylinders

Condition: used, Year of construction: 2002, Machine type: Flexographic printing press Web width: 520 mm Number of colors: 8 Equipment & Configuration: • 7 UV LED units + 1 UV unit • 5 sets of sleeves • 5 magnetic cylinders • 12 anilox rollers • Cold foil unit – 1 • Turning bar – 1 • 2 die-cut stations • Double-shaft rewinder Hodpfx Aoyn Scljmtjt

Condition: used, Year of construction: 2017, Maximum printing width: 1,650 mm Maximum web width: 1,700 mm Printing repeat: 430 – 880 mm Maximum mechanical speed: 600 m/min Suitable for solvent-based inks and coatings CFK Air Base mandrel printing cylinder system Stork CFK Air Base anilox sleeve system Gas drying system with Maxon burners Automatic viscosity control system Allstein / Inkspec Automatic ACLEAN ink cleaning system AVISCO viscosity control ARUN automation package Hydrostatic central impression cylinder bearings Unwind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shaftless * Material width: 850–1,700 mm (shaftless); minimum 450 mm with winding shaft * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Rewind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shafted Hedpfx Amjzp R Dpetst * Material width: 450–1,700 mm * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Suitable for printing on: • PET • BOPP • OPA • LDPE • HDPE • PP films

Condition: used, Year of construction: 2023, total length: 1,400 mm, total width: 600 mm, total height: 2,180 mm, Colour: Blue Empty weight: 280 kg - Year: 2023 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: SA021 - Drive system: Conventional - Press force [ton]: 30 - Min. stroke [mm]: 0 - Max. stroke [mm]: 190 - Table length [mm]: 695 - Table width [mm]: 60 - Ram width [mm]: 60 - Max. opening height [mm]: 1000 - Height adjustment [mm]: 830 - Transport dimensions: 1400mm x 600mm x 2180mm (l x w x h) Hodpezry H Eefx Amtjt - Transport weight [kg]: 280kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Amis ZBP 50 S Duo sawdust briquetting machine Year of production 2019 Load capacity up to 140 kg depending on material 3.800 working hours Briquettes Ø 50 mm Tank with a capacity of 1.2 m³ Roller with feeder Pre-ironing Screw conveyor Hydraulic pump motors, 7.5 kW each Fan cooling Sawdust level sensor in the tank Hydraulic oil tank 100 l SIEMENS control system Hedpfxoumwm Se Amtot Dimensions length x width x height 3000 x 2400 x 1700 mm Weight 2000 kg The price of the new machine is 39.800 Euro

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total width: 2,100 mm, total height: 2,500 mm, total length: 6,000 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 5,000 kg, power: 11 kW (14.96 HP), input frequency: 50 Hz, In working condidion, el motor is replaced with the smaller one for efficiency Hsdpjzi A Iyjfx Amtjt

Condition: good (used), Year of construction: 1990, pressing force: 3,000 t, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Hodpezwk Ecjfx Amtet Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. Hsdpfsznng Ssx Amtjt Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) * with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf - Assortment of punches and dies - Original operating instructions

Condition: new, Year of construction: 2025, pressure 1000 t Hodpeym D E Asfx Amtst distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Hedpfxozqr Nio Amtet Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Year of construction: 1995, condition: used, machine/vehicle number: 211045 H110, Response time: 133 ms, clamping force: 2,500 kN, control unit, two-hand operation, upstream light barrier, separate control cabinet, 1 workbench with a Garant two-jaw vise mounted on it, storage shelf. Hjdpfx Aozqzcrjmtst

Year of construction: 2020, condition: good (used), functionality: fully functional, DESCRIPTION/FEATURES: 5-color offset printing press for labels, with an inline flexo unit and die-cutting. The machine is equipped with: • Unwinding unit • BST web guide • UV LED drying (5) • Turning bar • Offset units: 5 • Flexographic unit Hodpfezrxdpex Amtjt • BST registration camera • Automatic washing system • for ink rollers • Automatic plate loading system • Semi-rotary die-cutting unit with magnetic cylinder • Rewinding unit with slitting (blades) • (shearing) • Inking console + CIP 3 for automatic color adjustment • Cooling unit for ink fountains • CCD plate punching table • Automatic registration

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Year of construction 1990+ retrofit Stand width 2600 mm Hedow Hx Rzspfx Amtot Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp

Condition: used, Year of construction: 1985, pressure 200 t table length 1500 mm table width 1200 mm Distance between columns 1250 mm Stroke 1150 mm Table surface area 1200 x 1500 mm Distance table/ram, stroke up 1475 mm Table height above floor 638 mm Ram surface 1200 x 1500 mm Weight 16,0 t Dimensions (WxDxH) 2,2 x 4,52 x 4,6 m Hjdpfxjzrpurj Amtet with pivoting ram, moving and tiltable table, ejector in table, ram interlocking via toothed bar, injection unit in ram

Condition: good (used), functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, pressing force: 130 t, Equipment: CE marking, FOR SALE: Amada HFE 130-3 L CNC Hydraulic Press Brake Amada HFE 130-3 L – Heavy-Duty CNC Press Brake, 130 Tonnes We are offering a used Amada HFE 130-3 L CNC hydraulic press brake in [good / fully operational] condition. A well-built machine from Amada Europe, ideal for demanding sheet metal bending applications. Key Specifications ParameterValuePressing force1,300 kN (approx. 130 tonnes) Maximum stroke 350 mm Machine Details Year of manufacture: 2001 Condition: Good ! Hodsy Hf Tvspfx Amtst Tooling included Why Buy This Machine? The Amada HFE 130-3 L is a robust and precise hydraulic press brake built for high-volume industrial production. With 130 tonnes of pressing force and a generous stroke of 350 mm, this machine handles a wide variety of demanding bending tasks with excellent repeatability. Amada's renowned build quality ensures long service life and low maintenance requirements.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Durma CNC pressbrake Model CNC HAP 30160 Hedezuvxpopfx Amtot Year : 2005 Capacity : 3050 mm. x 160 ton Control : Cybelec 3 axis (Y1 - Y2 - X) Last service and security control : July 2026 Equipment.... -Lots of bending tools -Crowning -Front arms sideway adjustable -Foot pedal

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit. Hodpfx Aoxmr Rxemtjt

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 380 A, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table length: 1,320 mm, table height: 290 mm, throat depth: 180 mm, ram plate length: 500 mm, clearance between the columns: 900 mm, retraction force: 40 t, total length: 1,500 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,500 kg, controller model: Estun NC E21, motor manufacturer: Siemens, Equipment: CE marking, documentation/manual, hydraulics, safety light barrier, The Digima WCY-40T/1320 hydraulic press brake is a compact and robust machine designed for the precise bending of sheet metal and smaller metal components. Its space-saving dimensions make it an excellent choice for metalworking workshops, manufacturing plants and companies producing enclosures, guards, panels, profiles and various technical components. The machine provides a nominal pressing force of 400 kN, equivalent to 40 tonnes, and a working-table length of 1,320 mm. The distance between the columns is 900 mm, the throat depth is 180 mm, the ram stroke is 100 mm, and the maximum open height is 290 mm. The back gauge offers an adjustment range of up to 500 mm, enabling the sheet to be positioned accurately before bending. The Digima WCY-40T/1320 is equipped with an Estun E21 NC control system, which controls the position of the back gauge on the X axis and the working position of the Y axis. The controller includes an operation counter, intelligent positioning, screw-backlash compensation and a function that retains the programmed position after the power supply has been switched off. A positioning resolution of 0.1 mm or 0.01 mm supports accurate and repeatable production. The press brake is powered by a 3 kW Siemens main motor. Its hydraulic system uses Bosch-Rexroth components and a Sunny hydraulic pump, while the electrical system includes Schneider Electric components. PARKER seals and guide rings increase the durability of the working mechanisms and support reliable operation during intensive daily use. The ram approach and return speeds are 80 mm/s, while the working pressing speed is 9 mm/s. These parameters enable efficient machine positioning and smooth bending operations. The rigid monoblock steel frame is welded and heat-treated to provide high structural stability and resistance to deformation under load. Hedpfx Aezlqkuemtjt The machine is equipped with side guards, a front safety curtain, protection against excessive hydraulic pressure and high oil temperature, motor overload protection, electrical leakage protection and a safety relay. The electrical cabinet has an IP65 protection rating, and the press brake is CE-certified. The standard equipment includes bending tools, two front material-support arms, a foot-control pedal, foundation bolts, spare sealing rings and mechanical and electrical documentation. The upper punch features an 86° working angle and an R0.5 tip radius, while the multi-V lower die allows the operator to select a suitable bending position according to the type and thickness of the material. The Digima WCY-40T/1320 is a practical, user-friendly and economical press brake for companies requiring a reliable machine for the everyday processing of small and medium-sized components. Its combination of a 40-tonne pressing force, a 1,320 mm working length, NC control and high-quality branded components makes it suitable for both one-off projects and small batches of repeatable parts.

Condition: excellent (used), 0.75 kW motor Working height: 205 cm Working length: 300 cm Working width: 8 cm 4 upper clamping jaws Hedpfx Aozu Ndrjmtst 2 lateral clamping jaws

Condition: excellent (used), Catalogue number 7737 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg ADVANTAGES – Italian manufacture – Used briquetting press – DTR technical documentation – Condition: very good Net price: 34,900 PLN Net price: 8,300 EUR (based on the rate of 4.2 EUR) Hjdjzrnvzspfx Amtst (Prices may change with significant exchange rate fluctuations)