Used Gmx 250 Linear for sale (12,205)

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Guedpfjvzqyfjx Af Aef Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, height 810 mm. Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: used, Vise Guodpfx Afsdd Tpio Ajf Jaw width 200 mm Jaw height 80 mm Base plate: width at the bottom 250 mm Length at the bottom 500 mm Opening width 250 mm Weight 72 kg

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Gusdpfey Rnr Ajx Af Aef Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: used, Year of construction: 2014, The portal-type hydraulic press is designed for bending or straightening, as well as for processing finished welded components, and for disassembling mining machinery and other equipment. It is used in mechanical, production, and repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of manufacture: 2014 Technical specifications: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of gate cylinder 1: 2 x 300 mm Diameter of gate cylinder 2: 2 x 250 mm Godpfohktq Aex Af Ajuf Force of gate cylinders 1: 2 x 1768 kN Force of gate cylinders 2: 2 x 1228 kN Maximum clearance: 1240 mm Stroke of working cylinders: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - four working cylinders - gate movement cylinder - working cylinder movement cylinder - power unit with T-100/30 pump (year 2006, overhauled in 2011) Technical condition: used, requires inspection.

Condition: used, Gildemeister GMX250 Gusdpfex Up A Dsx Af Ajf

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 2,000 kg, number of shelf rows: 10, shelf height: 7,500 mm, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) Gedpfov Uqwdex Af Ajuf - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Guedpfx Afew Uf Tks Asf Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: used, functionality: fully functional, Koganei ORGA40X2750 Linear actuator. Good working condition. Gsdpfetwqqgsx Af Aeuf Please check out our other listings as well.

Condition: used, functionality: fully functional, Hoerbiger Origa P120S-25 Linear actuator. Guedpfx Ajtwqp Ajf Ajf Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 23,335 h, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS TRAVEL RANGES X-axis: 1,040 mm Y-axis: 600 mm Z-axis: 500 mm WORK TABLE Table surface: 1,250 × 600 mm Table load: max. 600 kg SPINDLE AND TOOL HOLDER Tool holder: SK 40 Spindle speed: 1–8,000 min⁻¹ Spindle torque S1/S6: 140/200 Nm Spindle motor power at 100/40 % duty cycle: 13/19 kW FEEDS AND RAPID TRAVERSES Feed rate range: max. 40,000 mm/min Rapid traverse X- and Z-axis: max. 70 m/min Rapid traverse Y-axis: max. 40 m/min Gujdpfx Aszqcucsf Aef TOOL CHANGER Tool positions: 30 Tool diameter: max. 100 mm Tool diameter with free adjacent positions: max. 140 mm Tool length: max. 300 mm Tool weight: max. 7 kg COOLANT SUPPLY Internal coolant supply through the spindle: 20 bar OPERATING HOURS Power-on hours: 70,278 h Spindle hours: 23,335 h MACHINE DETAILS MACHINE DATA Machine type: Vertical machining center Manufacturer: Deckel-Maho DMG Type: DMC 104 V linear Year of manufacture: 2005 Control type: CNC Control: Heidenhain iTNC 530 Total power consumption: 39 kVA Machine weight: approx. 8,900 kg EQUIPMENT CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in the Y- and Z-axis Preparation for measuring probe 30-position tool changer Rotoclear Production package 2 Internal coolant supply through the spindle Coolant system with paper band filter Blow-through air through the spindle center, selectable via M-function Chip conveyor Machine bed flushing Linear drive in the X-axis Operating mode 4 for program testing with extended manual intervention Machine documentation

Condition: good (used), clear span: 2,700 mm, total length: 11,400 mm, load per truss pair (max.): 1,500 kg, shelf height: 2,500 mm, Technical data for the pallet racking system: Racking system: META (Thyssen) Type: Multipal S Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 11,400 mm Number of bays per racking row: 04 units, each 2,700 mm Number of levels including the base level: 02 units Technical data for the capacity: Pallet spaces per bay: 09 units Number of pallet spaces per row: 36 units Total number of pallet spaces: 36 units Based on: Load handling unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): approx. 500 kg Included in the scope of delivery: 05x Pallet racking uprights, used Material color: Sendzimir galvanized Frame profile: SR120|20 Profile dimensions: 120 x 75 x 2.00 mm Includes cross and diagonal braces, Base plates The uprights are pre-assembled Gujdjzuth Uepfx Af Aef (bolted frame) 2,500 mm high 1,100 mm deep 16x Pallet racking beams, used Material color: yellow Beam type: HN85|20 Box profile: 85 x 50 mm Grapple: 3 HK (hooks) Clear span: 2,700 mm Max. load per beam pair: 1,500 kg, with evenly distributed load 32x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 20x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 10x Shimming plate, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign With information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), clear span: 2,700 mm, total length: 22,365 mm, load per truss pair (max.): 1,500 kg, shelf height: 2,200 mm, Technical data for the pallet racking system: Racking system: META (Thyssen) Type: Multipal S Guodpfezupayjx Af Ajf Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 22,365 mm Number of bays per racking row: 08 units, each 2,700 mm Number of levels including base level: 02 units Technical data for the volume: Pallet spaces per bay: 09 units Number of pallet spaces per row: 72 units Total number of pallet spaces: 72 units Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): approx. 500 kg Included in the scope of supply: 09x Pallet racking uprights, used Material color: Sendzimir galvanized Frame profile: SR85|20 Profile dimensions: 85 x 75 x 2.00 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,200 mm high 1,100 mm deep 32x Pallet racking beams, used Material color: yellow Beam type: HN85|20 Box profile: 85 x 50 mm Connector: 3 hooks Clear width: 2,700 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 64x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 36x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 3,250 mm, total length: 39,539 mm, load per truss pair (max.): 2,550 kg, shelf height: 4,130 mm, Technical data for the pallet racking system: Racking system: Redirack Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 39,539 mm Number of bays per racking row: 12, each 3,205 mm Number of levels plus base level: 2 Included in the scope of supply: 13 x Pallet racking uprights, used Material color: light blue Frame profile: S Profile dimensions: C83x50x15x1.75 mm Including cross and diagonal braces Base plates The uprights are pre-assembled (welded framework) 4,130 mm high 1,100 mm deep 48 x Pallet racking beams, used Material color: yellow Box profile: 120 x 50 mm Gujdpozulgijfx Af Aof Clear span: 3,205 mm Maximum load per pair of beams: 2,550 kg, with evenly distributed load 96 x Safety pins, used Material color: Sendzimir galvanized For securing the longitudinal members against accidental lifting out 52 x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 26 x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 1 x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), clear span: 2,707 mm, total length: 11,243 mm, shelf height: 4,130 mm, Technical data for the pallet racking system: Racking system: Redirack Technical data for installation: Number of racking rows: 1 Length per racking row: approx. 11,243 mm Number of bays per racking row: 04, each 2,707 mm Number of levels plus base level: 02 Technical data for volume: Pallet spaces per bay: 09 Number of pallet spaces per row: 36 Total number of pallet spaces: 36 Included in the scope of supply: 05x Pallet racking uprights, used Material color: light blue Frame profile: S Profile dimensions: C83x50x15x1.75 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled Guedszukz Sjpfx Af Aof (welded framework) 4,130 mm high 1,100 mm deep 16x Pallet racking beams, used Material color: yellow U-profile: 100 x 50 mm Type: Head beam Clear span: 2,707 mm 32x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal supports against unintentional lifting 20x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Type: Carbon steel, galvanized Approved for: cracked concrete 10x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Year of construction: 2014, Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: Berg & Schmidt, double miter band saw with roller conveyor left/right -Type: GBS 250 Super AutoCut 2-stage -Drive: 1.7 kW Gsdpfx Afjzuk Sdj Aeuf -Miter cuts: 60° left and 45° right -Cutting capacity 90°: Round 255mm, Square 230mm, Rectangle 300x180mm -Cutting capacity 45° left: Round 210mm, Square 190mm, Rectangle 200x160mm -Cutting capacity 60° left: Round 135mm, Square 110mm, Rectangle 130x100mm -Cutting capacity 45° right: Round 180mm, Square 176mm, Rectangle 180x100mm -Saw band speed: 37/74 m/min -Band saw: 2765 x 27 x 0.9 mm -Coolant system: CoolmaticPlus micro-spray system -Quick-release clamping device: adjustable in T-slot for quick position changes -Roller conveyor: 2370/360/H960 mm / 3120/325/H960 mm -Transport dimensions: 1640/850/H1560 mm / 2230/800/H200 mm -Weight: 555 kg

Condition: used, 4000 + 5000 mm Working width 250 mm Wheel width 250 mm roll diameter 60 mm Guedpozughhefx Af Aof work height max. 880 ± 60 mm Feed and Discharge Roller Conveyor Feed Roller Conveyor, Length 4000 mm: * Roller conveyor without scale or stop, with side guides * Conveyor width 300 mm, usable roller width 250 mm Outfeed roller conveyor, length 5000 mm: * Length measuring device with mm scale and reading magnifier on the stop carriage * Measuring track with manual measuring system and a sturdy precision flat steel guide * Conveyor width 300 mm, usable roller width 250 mm

Condition: new, capacity Ø 140 - 250 mm sawing motor 30 kW hydraulic motor 5,5 kW Saw Feeding Servo 3 KW Siemens Material Feeding Motor 3 KW Siemens Saw speed 30-80 rpm /min saw-blade dia. Ø750 x 3,8 x 3,2 x 80 mm cutting range min. 1000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 3500 x 8000 mm Gedpfx Afoymf Swe Ajuf Saw speed 30-80 rpm / U pro min weight of the machine ca. 9000 kg GERD WOLFF GLS-250 High-performance circular Saw From 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

Condition: used, diameter / mm Cutting (quantity) / 0 Gusdpfx Afsymgbtj Ajf weight / kg length 1635 mm

Condition: used, weight max. 250 kg stroke / mm Godpfx Afsykvbqs Aouf Load: 250 kg Chain length: 2.5 m Weight: approx. 30 kg

Condition: used, diameter / mm boring diameter / mm - / Type: KTNC 250 Gsdpfjy Tbu Aex Af Aeuf Make: FORKARDT

Condition: used, diameter 250 mm boring diameter 100 mm Gjdpfxjy S Dnce Af Aouf - / Type: 4KT 250 Diameter: 250mm Bore diameter: 100mm n-Max: 2500 / min f-max: 6000 / dan

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm turning height 2000 mm cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg total power requirement 71 kW Control Siemens Sinumerik 840 Single-column vertical lathe 2000 x 2000mm Retrofit: 1997 Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Gujdpfjuddpgex Af Aef Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed

Year of construction: 2016, condition: ready for operation (used), Precision Mechanical Machine Vise manufactured in 2016. This TRIGO SCS 120-250 features reversible jaws with a jaw width of 120 mm and a trapezoidal spindle drive mechanism. It offers versatile mounting configurations for horizontal, vertical, or lateral clamping. If you are looking to get high-quality clamping capabilities, consider the TRIGO SCS 120-250 machine we have for sale. Contact us for further details. Gjdpfxozulb He Af Asuf - Equipment Type: Precision Mechanical Machine Vise / Clamping System- Model / Jaw Type: SCS 120 / Grip Reversible Jaws (Type 87.120)- Jaw Width: 120 mm- Drive Mechanism: Trapezoidal spindle with hex socket drive- Mounting Configuration: Horizontal, vertical, or lateral clamping capable- Year of manufacture unknown

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping plate with T-slot, clamping table, T-slot table, milling machine table, tilting table Guedpfxey Iwkco Af Aof -Clamping table: Milling machine table, tilting table, T-slot table -Table surface: 250 x 250 mm, swivels on both sides -T slots: Slot width: 14 / 25 mm, Slot depth: 24 mm -Dimensions: see photos -Transport dimensions: 300/250/H155 mm -Weight: 26.4 kg

Condition: used, Year of construction: 2007, Technical details: turning diameter: 160 mm turning length: 300 mm control: Siemens 840D Spindle 1 Power: 22 kW Spindle 1 RPM: 5000 1/min Spindle 1 max. bar diameter: 65 Spindle 1 Torque: 150 Nm Spindle 2 power: 16,8 kW Spindle 2 RPM: 5000 1/min Spindle 2 torque: 100 Nm Travel for pick up of 2nd Spindle: W2=690 mm dimensions of the machine ca.: ´4,5x2,0x2,3 m weight of the machine ca.: 9 t Accerories Spindle 1 Collet chuck Spindle 2 Collet Chuck Chip Conveyor Guedpfezd Tcwex Af Aef Parts catcher CNC turning center with 3 turrets with rotary tool drives and 2 spindles. There is an internal coolant system for the turrets with individual pumps *