Used Grain for sale (717)

Condition: used, empty load weight: 5,900 kg, maximum load weight: 30,100 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2014, loading space length: 9,600 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 49 m³, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 3 axles, SCB axles (disc brakes), air suspension, 1st axle can be lifted, raising and lowering function, ABS (anti-lock braking system), roll tarp, catwalk, grain discharge chute, flap, U-shaped protection, side aluminum fender, supports. Njdpjzwvyxofx Ancelf Body: 3-axle aluminum tipper with roll tarp, work platform & grain auger, approx. 49 m³, 3 x 9-ton SCB axles, disc brakes, 1st axle can be lifted! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: ready for operation (used), functionality: fully functional, overall weight: 9,000 kg, Used impact crusher, Kleemann SDR 1000 x 230 mm, capacity 20 - 70 t/h, final grain size approx. 0/25 mm, maximum feed size 200 mm, weight approx. 9 tons. The crusher can be easily rotated by hand. Immediately available, subject to prior sale. Nlsdpfx Aezhn Hxoncef

Condition: used, Year of construction: 1981, -1- used impact crusher for hard rock, inlet approx. 350 x 690, rotor 1000 x 670, capacity up to 40 t/h, feed size up to 180 mm, final grain size 0/35 mm. Nsdpfow N Hk Hox Ancslf

Condition: new, axle configuration: 3 axles, suspension: air, tire size: 385/65R22,5, color: silver, Year of construction: 2026, Fully equipped: - Remote control - Small toolbox on the front panel - 2x grain chutes - Smartboard - 6x round tail lights = Further information = General information Year of manufacture: 2026 Axle configuration Njdpfx Aszv Tu Rsncolf Tire size: 385/65R22.5 Axle brand: SAF CD Suspension: Air suspension Rear axle 1: Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Tire tread left: 100%; Tire tread right: 100% Rear axle 3: Lift axle; Tire tread left: 100%; Tire tread right: 98% Weights Unladen weight: 7,070 kg Payload: 37,930 kg GVW: 45,000 kg Further information Please contact Mark van der Steen for more information.

Condition: used, maximum load weight: 29,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 05/2027, loading space volume: 55 m³, total length: 10,900 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Kempf SKM 36/3 Alu tipper body, 55 m³, combination flap * SAF axles with air suspension and disc brakes * 1st axle as a lift axle * Aluminum rims * SKM 36/3 Alu tipper body, 50 m³, combination flap * Combination flap with grain slide * Aluminum support struts * Work platform with access ladder * Roof roll cover, central cover closure * Work lights * Storage boxes * Ladder with bracket * Wabco ControlBox Nedpfx Aozwawbsncolf We are happy to provide further information if required.

Condition: used, maximum load weight: 35,585 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2022, Year of construction: 2022, Equipment: ABS, * Granalu grain semi-trailer * First registration: 03-2022 * Volume: 53 m³ * Lift axle * Jost axles * Air suspension * Combination doors * Unladen weight: 6,415 kg Nodpfx Anjzkd Tyjcolf * More pictures and videos available via WhatsApp * Specifications subject to change without notice and prior sale.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Holp CutWheel / CW.149.140 / incl. MS10 mounting / HARDOX / NEW / in stock & immediately available Price: €18,590.00 net / €22,122.10 gross - Suitable for excavators: 12 – 17 t - Own weight approx.: 670 kg - Cutting material diameter (cutting direction): 3 – 50 mm - Cutting material diameter (sawing direction): 50 – 200 mm - Cutting width: 1,360 mm - Cutting height above ground: 150 mm - Oil flow: 100 – 110 l/min - Hydraulic pressure: 180 – 200 bar - Recommended blade speed: 80 – 100 rpm Advantages of the Holp CutWheel: - Clean cutting of all types of wood due to adjustable counter blade - Significantly more economical operation as less manpower and fewer machines are required, while maintaining a high level of operational safety - 3-in-1 functionality: cutting (3 mm to 50 mm), sawing (50 mm to 200 mm), and piling of cut material - Work at heights up to 8.5 meters with a 10-tonne excavator and up to 10 meters with a 15-tonne excavator - The cutting wheel operates in two directions and easily handles diameters from 3 mm to 20 cm - High robustness (cutting wheel made from fine-grain steel) - Cutting and sawing direction as well as diameter are adjustable from the cab without interrupting the work process, which also ensures greater safety - Significant savings as the CutWheel on the excavator replaces a platform lift – thus, the CutWheel replaces various machines and manual labor Nlsdjynrhzepfx Ancof - The robust design also allows for pushing material lying on the ground, similar to a broom - As the CutWheel does not saw but pinches the wood in both cutting directions, wood fibers are not torn out as with a conventional saw blade. This results in a smooth cutting surface, preventing fungal infestation - Three hydraulic connections are required: Double-acting work line for cutting/sawing blades 1 x leakage oil We have many other Holp products available for immediate delivery in our warehouse! Mr. Herden (phone) will be pleased to assist you. Upon request, we are happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Subject to errors and prior sale! New: Yes Empty weight: 670 kg Part suitable for: Forestry applications Please contact...

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Holp CutWheel / CW.099.110 / incl. MS08 mount / HARDOX / NEW / in stock & immediately available Price: €14,290.00 net / €17,005.10 gross - Suitable excavators: 7 – 11 t - Own weight approx.: 490 kg - Cutting material diameter (cutting direction): 3 – 50 mm - Cutting material diameter (sawing direction): 50 – 170 mm - Cutting width: 1,000 mm - Cutting height above ground: 100 mm - Oil flow rate: 50 – 60 l/min - Hydraulic pressure: 180 – 200 bar Nodpfx Aoynrhuencslf - Recommended knife rotation speed: 100 – 120 rpm Advantages of the Holp CutWheel: - Clean cuts on all types of wood thanks to the adjustable counter-blade - Significantly more economic operation as less manpower and fewer machines are required, while ensuring high occupational safety - 3 work steps in one: cutting (3mm to 50mm), sawing (50mm to 170mm), and collecting the cut material - Work at heights up to 8.5 meters with a 10-ton excavator and up to 10 meters with a 15-ton excavator - The cutter wheel works in both directions and easily processes diameters from 3 mm to 17 cm - High durability (cutter wheel made of fine-grain steel) - Cutting and sawing direction as well as diameters can be adjusted from the cab, so work does not need to be interrupted—this also ensures increased safety - Significant savings, as the CutWheel on the excavator replaces a lifting platform—thus, the CutWheel replaces various machines and even manual labor - The robust design also allows pushing together of material lying on the ground, similar to sweeping with a broom - As the CutWheel does not saw but 'shears' the wood in both cutting directions, the wood fibers do not tear as with a conventional saw blade. This ensures a smooth cutting surface, which prevents fungal infestation - Three hydraulic connections required: Double-acting working line for cutting/sawing saw blades 1 x leak-oil return We have many more Holp products in stock and available for immediate delivery! Mr. Herden (phone) will be happy to advise you. On request, we can also provide you with a financing offer. We are an official sales and service partner for Holp. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Westtech. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for JCB construction equipment. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Subject to errors and prior sale! New: Yes Unladen weight: 490 kg Part suitable for: Forestry applications Please contact us...

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,706 h, power: 366 kW (497.62 HP), gearing type: hydrostat, fuel type: diesel, maximum speed: 30 km/h, first registration: 07/2017, next inspection (TÜV): 07/2026, rear tire size: 500/85 R24, machine/vehicle number: YHG233775, Equipment: air conditioning, cabin, hydraulics, lighting, rape cutter, trailer coupling, On behalf of an authorized party, we are offering the following used item for sale: Case-IH combine harvester AF 7240 with ST rotor Chassis number: YHG233775 Longitudinally arranged ST rotor 30 km/h version 6-cylinder Power: 366 kW (497 hp) Front wheels: Track drive, sprung, 610mm Rear wheels: 500/85 R24 HID work light package AC FAN automatic fan speed adjustment Adjustable discharge spout Cross-flow transverse flow fan Hydraulic drive Redekop chopper Xtra Chop Accu Guide complete Steering on Egnos – retrofitted with existing RTK antenna LED work light package, 4 x rear, 1 x grain tank inlet Additional cameras Yield and moisture measurement Radio, two-way radio Last inspection before the 2025 harvest, approximately 300 ha Minor scorching above the tank, damaged cables have been repaired Header 9.15 m, Series 3050, steplessly adjustable Type: 306 Year: 2017 Serial number: 868112015 Hydrostatic reel drive Automatic adjustment of reel speed Reel horizontal adjustment Hydraulic multi-quick coupler Short stubble divider Hydraulic rapeseed knife Rabolon ear lifter Header wagon TAM Leguan quattro 30 Type: SWW 30FT VIN: WEGTP28F3HAAA3318 Year: 2018 2-axle 25 km/h LED lighting set Tires: 10.0/75-15.3 Price upon collection. The item is located in 49419 Wagenfeld-Ströhen and must be collected from there by the buyer. This offer refers exclusively to the described item. Other items that may be shown here are possibly part of a different offer. Nlodjzabtdopfx Ancef Errors and omissions excepted. Inventory number: 2926-26

Condition: new, axle configuration: 2 axles, suspension: air, tire size: 245/70-17,5, Equipment: ABS, - EBS (Electronic Braking System) - LED lighting - Alloy wheels - Air suspension - Spare wheel - Toolbox - Central lubrication - Additional steering axle PAVIC 2-axle forestry machine low loader, type: STLT2Z for harvester transport ---- Upcoming! Color freely selectable!!!! Fifth wheel load: 18,000 kg Axle load: 24,000 kg (technical) Gross weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany!!!! Chassis made of welded steel construction using high-grade fine-grain steels Lashing eyes: 130 kN per side, 5 units each Additional lashing eyes: 3 pairs on the raised bed Insertable stake pocket system made of galvanized steel with aluminum sideboards (silver anodized) Steel front wall approx. 400 mm high Foldable aluminum loading ramps with mechanical safety lock SKF central lubrication system with reservoir (controlled by brake light), approx. 20 lubrication points Dimensions: Total length: 16,000 mm Bed length including rear section: 11,364 mm Saddle height: 1,330 mm Ground clearance at driving level: 184 mm Kingpin projection: 600 mm R1 dimension (kingpin to front): 410 mm (swing radius) R2 dimension (kingpin to frame): 2,150 mm (swing radius) Further dimensions available on request (technical drawings) Axles: 2 x 12,000 kg (technical), Gigant with drum brake, in combination with 8 pcs. 245/70 R17.5 premium tires on Alcoa Dura Bright rims Suspension: Pneumatic with lifting and lowering function Second ride height + approx. 50 mm can be activated from the driver’s cab. When speed exceeds 20 km/h, the trailer lowers automatically. Including axle load gauge Coupling device: 2'' kingpin (interchangeable, single position) WITHOUT landing gear! -> Customers typically use a wide wooden beam under the front frame. Brake system: Nsdpsyr Izxefx Ancolf Wabco EBS with axle load measuring system (Smartboard) incl. odometer Parking brake: spring-actuated Lighting system: 2 pairs of tail lights (3-chamber lights) Side marker lights LED Outline marker lights LED Front and rear position lights LED Reversing and auxiliary lights, each in a round design License plate light LED 1 round beacon, plug-in and cab-operated via separate switch 4 x LED work lights 4 x oversize markers, double-secured (wing screw and pin) with LED lighting red/white Steering: Tridec HF-E (hydraulic forced steering on both axles) including automatic centering and straight-ahead function. Remote control Tridec (wireless remote), also operable by cable Paintwork: Entire steel structure shot-blasted after welding and primed with special adhesion primer. Subsequent 2-component paint finish in RAL color of choice. Axles and wheel hubs painted black or, for an extra charge, finished in RAL color Other mounted parts are galvanized and/or painted/powder-coated or made of aluminum (with or without anodization) Approval: Including §13 report Including §70 report (customer must provide a suitable and approved 3-axle tractor unit); includes, among other things, turning circle test at TÜV Nord in Meppen. This is a non-binding offer. Subject to prior sale, errors, and changes. Axle configuration Tire size: 245/70-17.5...

Condition: excellent (used), Year of construction: 2011, 424 USED König Bun Line: Bun production: Hamburger, hot dog, Kaiser roll, double cut, cut, elongated. Grain sprinkling on both sides. The line has been inspected and serviced by Koenig. TECHNICAL DATA: - Weight: 30-120 g. EXTERNAL DIMENSIONS (in cm): - Length: 1500, - Height: 450, - Width: 200. EQUIPMENT: - Tipping device - Rex Indistrie divider - Pre-proofer - Labeling - Kaiser roll - Module for baguettes, hot dogs, and hamburgers. - Sprinkling with seeds (double-sided) - Arranging on 60x100 or 60x80 baking sheets. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile. Nledpfx Ajzifmrjncef

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Nlodpfx Asztm Hhoncsf

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo Nedpfx Anoztm Hbscelf • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Nodpfx Aneztm Eqocslf

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling Nljdpfx Asztm Dmjncef • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Nedpfx Anoztm Aijcslf Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Nlsdpeztmv Asfx Ancjf

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Nledpfx Asztmuroncef Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, mileage: 1 km, power: 55 kW (74.78 HP), gearing type: other, fuel type: diesel, color: grey, overall weight: 12,000 kg, empty load weight: 12,000 kg, first registration: 05/2025, emission class: none, suspension: other, Year of construction: 2025, operating hours: 8 h, driver cabin: other, construction height: 2,670 mm, fuel: diesel, load capacity: 12,000 kg, - Current delivery time is approximately 4 months. - Net price: EUR 139,000 plus 19% VAT. - Inspection possible at any time by arrangement, near Bielefeld. - Location: Bad Salzuflen. - Compact, mobile jaw crusher; an improved, updated version of the Bison 120. - Single-person operation is possible via remote control, depending on the material; supervision or an operator may be required for dismantling. - Radio remote control and on-site operation! - Material hopper: 2.3 m / 3 (dimensions: L 2.4 m x W 1.56 m, loading height: 2.69 m) - Preliminary screening with a grizzly screen. - 680 mm x 400 mm jaw crusher. - Ideally filled with a 1 m³/3 bucket and an 8 to 15-ton excavator. - Magnetic belt. - Water spray nozzles for dust reduction. - Steel chain with rubber pads. Nedpfx Anjzv Nq Uocslf - Self-weight: 12 tons. - Transport dimensions: L 5.50 m x W 2.20 m x H 2.67 m; the height can be reduced by folding down the hopper and platform to match sea container dimensions! - Output up to 50 to 80 tons per hour, depending on the material. - Fuel consumption: approximately 14 liters/hour. - Grain size: 20 mm to 80 mm, hydraulically adjustable. - Very good access to the engine/hydraulics, etc. (rear and side flaps open 90° and provide full access for maintenance work). - All essential functions can be controlled with the radio remote control (spare battery with quick charger). - Subject to errors and prior sale! - ... VAT can be shown separately, demonstration model, diesel, very good condition.

Condition: used, mileage: 1 km, power: 18 kW (24.47 HP), gearing type: other, fuel type: diesel, color: grey, overall weight: 3,400 kg, empty load weight: 3,400 kg, first registration: 05/2025, emission class: none, suspension: other, Year of construction: 2025, operating hours: 6 h, total length: 4,600 mm, driver cabin: other, construction height: 2,000 mm, fuel: diesel, - Available from summer 2025 in Bad Salzuflen - Net price: EUR 64,900 - Compact, mobile jaw crusher, 3400 kg operating weight, with rubber tracks - One-person operation via remote control - Radio remote control - Material hopper 0.6 m / 3 (dimensions: L 4.6 m x W 1.50 m, L 2.0 m = loading height 1.9 m) - Transport dimensions: L 3.0 m x W 1.50 m x H 2.2 m - 500 mm x 300 mm jaw crusher Nlsdpezv Nq Isfx Ancsf - Water spray nozzles for dust reduction - 3400 kg operating weight - Output up to 10 to 30 tons per hour, depending on the material - Consumption approx. 3-5 L/h - Grain size 25 mm to 80 mm, hydraulically adjustable via remote control - All essential functions can be controlled with the radio remote control (spare battery with quick charger) - Subject to errors and prior sale! ... VAT can be shown separately, demonstration model, diesel engine, very good condition.

Condition: new, empty load weight: 2,810 kg, maximum load weight: 8,990 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,500 mm, total length: 8,120 mm, suspension: other, color: grey, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - FLIEGL Tandem platform trailer TPS 118 with angled rear and ramps - New vehicle, delivery time upon request - Price: 21,900 EUR plus VAT - Fine-grained steel welded construction, hot-dip galvanized - 6 pairs of lashing eyes in the floor, each rated at 5 tons - Storage box - BPW drum brake axles - Parabolic suspension with maintenance-free steel/rubber/bearing system - 235/75R17.5 tires - Permissible total weight: 11,800 kg, unladen weight: 2,810 kg - Payload: 8,990 kg - Overall length: 8,080 mm, overall width: 2,550 mm - Internal platform dimensions: L 6,200 x W 2,550 - Loading height: 910 mm - Coupling height: 700 to 950 mm - Steel corrugated floor, hot-dip galvanized - Rear angle of approx. 900 mm - Aluminum front and side panels, 400 mm high - Center and corner posts removable - Steel ramps with wooden covering, L 2,300 x 510 mm, laterally adjustable - Gas spring supports for single-person operation - Reflective strips according to ECE R048, white on the sides, red at the rear - Axle and frame painted in DB7350 Novagrau - 10-year warranty against rust - Errors and prior sales excepted! - More information and additional photos on our website: ... VAT can be shown, ABS, new, HSN 7951, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban) Nlsdpfxozv Nrfj Ancof

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, Year of construction: 2026, #Plateau semi-trailer Mega - Bespoke transport solution – configure your Fliegl vehicle to your requirements; vehicle shown is an example, production and equipment individually to customer specification #Chassis – general haulage semi-trailer - Fine-grain steel welded construction - Fifth wheel plate with replaceable 2" kingpin - Reinforced frame for high payload, also suitable for vehicle transport - Outer frame with "Load-Lock-Profil" at approx. 400 mm centres for lashing strap attachment - 10 pairs of lashing points recessed top/outside in outer frame, 10 t each - Foldable rear support legs - 2 wheel chocks with holder - Aluminium side impact protection - Galvanised steel underrun protection - Quarter-shell mudguards ahead of axle 1 and behind each axle, with anti-spray flaps behind each axle - 1 spare wheel holder for 1 spare wheel, with wheel fixing set - 2 lockable plastic toolboxes, W=600/H=425/D=460 mm - Container locks: 4 pairs recessed in floor for 2x20ft or 1x40ft containers, foremost position as recessed folding lock - 10 pairs of stake pockets recessed in outer frame, 70x40 mm internal - 10 stake pockets recessed centrally in floor, 70x40 mm internal - 2 transverse lashing/stake rails recessed in floor, full width to outer frame, approx. 100 mm high, 20 mm round steel bars top and bottom (approx. 60 mm apart), angle-plate base, half open below, for lashing and fitting 80x80 mm stakes #Arrangement - Stake pocket positions 2 and 4 per Fliegl data sheet - 20 plug-in stakes, hot-dip galvanised - Storage space for aluminium loading ramps, ramps slide in from the rear - 3 pairs of folding lashing eyes, 10 t, in outer frame #Axles & suspension - SAF disc-brake axles, air suspension - Axle 1 as automatic lift axle, incl. forced lowering and traction aid, activated by braking three times #Braking system - 2-line air braking system, colour-coded lines for easy servicing - Spring-loaded parking brake - 2 anti-mismatch coupling heads at front, no connecting line - EBS with front EBS socket, no connecting cable - Lift/lower valve, 2 ride heights adjustable via hand control (1x 980 mm, 1x 1100 mm coupling height) - Ride height linked to lift axle: raising lift axle increases loading/overall height by 50 mm - Trailer stability system #Wheels & tyres - 435/50 R19.5 steel wheels #Electrics - 24 V, multi-chamber lights - Yellow LED side marker lights - 2 white LED front position lights - 2 white/red outline marker lights at rear - 2x 7-pin and 1x 15-pin anti-mismatch sockets at front - LED work lights at sides, 1x left and 1x right (direction of travel) Nljdpfozwn Izsx Ancof - 2 additional LED work lights at rear - 1 beacon with holder, switched via side lights - 2 pairs of LED-illuminated warning boards, extendable to 4,000 mm - Additional 7-pin socket in underrun protection #Floor - Phenolic plywood floor approx. 30 mm thick, on longitudinal sub-frames for high point loads, forklift axle load up to max. 7,100 kg #Front wall / front corner posts - 25 mm aluminium hollow profile, 1,350 mm high - Solid steel corner posts (closed, heavy-duty version) - Front wall internally fitted with additional 1,250 mm high phenolic panel ("Crash-Blocker") - Steel impact protection at approx. 140 mm height on lower interior - Internal storage compartment for plug-in stakes

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic tailgate opening when tipping backwards, side boards with spring relief, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the sides, infinitely height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode, front-mounted, integrated compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- subject to printing errors, mistakes and changes, sample images --, More data under: !, More Details: ! Nsdpeztnq Usfx Ancjlf

Condition: new, empty load weight: 3,280 kg, maximum load weight: 7,220 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Nsdpfx Anjztnp Recelf

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Nljdpfx Anjztnqnecef