Used Grain for sale (738)

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and Rodpfx Ajwhp Dzsgzsck UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, total length: 14,759 mm, total width: 7,014 mm, total height: 4,314 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, noise level: 85 dB, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. Redpfexlc H Ujx Agzock The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects

Condition: used, maximum load weight: 29,260 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 02/2007, loading space volume: 48 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, OVA aluminium tipping body 47-50 m³ * BPW axles with air suspension and disc brakes * 425/65R22.5 * Roof roll tarp * Work platform * Rear doors with 2 grain slides We are happy to provide further information upon request. Rcedpfxsx Dpg Se Agzok

Condition: used, empty load weight: 7,160 kg, maximum load weight: 27,840 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 02/2006, loading space length: 10,500 mm, loading space width: 2,400 mm, loading space height: 1,950 mm, loading space volume: 49 m³, total length: 10,500 mm, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: silver, Year of construction: 2006, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40271 Mafa, SAK-H/LM * Year of manufacture: 2006 * ABS, anti-lock braking system * Air suspension * Used tarpaulin * Portal door * Air connection coupling head (red & yellow) * Spare wheel holder * 15-pin connector plug * Lifting and lowering device * Storage/tool box * Aluminum tipping body * Platform * Sliding tarpaulin * Grain discharge slider * Suspension: air * Gross vehicle weight: 35,000 kg Redpsxpc S Sofx Agzsck * Unladen weight: 7,160 kg * Payload: 27,840 kg * Permitted gross weight: 35,000 kg * Axle manufacturer: Daimler * Tyre condition 1st axle: 70% -- 60% - Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 50% -- 50% - Tyre size: 385/65 R22.5 * Tyre condition 3rd axle: 70% -- 70% - Tyre size: 385/65 R22.5 * Tyre size: 385/65 R22.5 * Internal dimensions: L=10,500 mm, W=2,400 mm, H=1,950 mm * Internal volume*: 49 m³ * Pallet spaces: 26 Disclaimer: Specifications subject to change, prior sale, and errors excepted. Additional photos and videos are available on our website. Our extensive range of services includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing options * Processing of all (export) documentation * Arranging export and customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer/shipping of commercial vehicles Please contact our trained specialists – we will be pleased to advise you.

Condition: used, mileage: 327,000 km, power: 345 kW (469.07 HP), first registration: 03/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2025, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, VOLVO FH 460 I SAVE GRAIN TRAILER ALCOA LIFT AXLE WITH KEMPF TRAILER ----VEHICLE HISTORY * FIRST OWNER * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * AUTOMATIC TRANSMISSION * POWER TAKE * ENGINE BRAKE * CRUISE CONTROL * ADAPTIVE ACCESS CONTROL (ACC) * LANE KEEPING ASSIST * ACTIVE BRAKE SYSTEM Rjdswg Nqropfx Agzock * AIR CONDITIONING * Auxiliary HEATING * LIFT AXLE * ALCOA ALLOY WHEELS * ON-BOARD COMPUTER / NAVIGATION * REFRIGERATOR * 1 BED * COMFORT SEATS & SEAT HEATING * FULL AIR SUSPENSION * ROOF LIGHTS * KEMPF BODY * TRAILER HITCH * 1 TANK * ADBLUE * TOOL BOX * GVWR: 26,000 KG * EMPTY WEIGHT: 11,050 KG * PAYLOAD: 14,950 KG * TIRE SIZE: * 1 & 3 AXLE: 385 / 55R22.5 * 2 AXLE: 315 / 70 R22.5 * GOOD TIRES * EXPORT SALES ONLY WITH DEPOSIT MIN. ¤500 - ¤2000 * * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ * ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATE AND 15 DAYS AUSTRIAN LICENSE PLATE EURO 1 TECHNICAL DATA SHEET (DATA TECHNICI) VEHICLE RESERVATIONS PLEASE ONLY VIA EMAIL VERBAL RESERVATIONS ARE NOT VALID For sales to EU and third countries, a deposit of € 100 is required. A minimum deposit of €500.00 / €1,000.00 is charged. (For sales to the EU and third countries, a levied deposit/guarentee of at least €500.00 / €1,000.00 will be charged.) Subject to changes, errors, and advance sales! You can find more vehicles on our website. Sales are subject exclusively to our Terms and Conditions - see website. Important Notice: Despite careful review of all details in our listing, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the purpose of initiating a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: new, overall weight: 42,000 kg, axle configuration: 2 axles, Equipment: ABS, Internal reference number for inquiries: PAVIC 2-axle forestry machine low loader Type: STLT2Z for harvester transport ---- In pre-order! Color freely selectable!!!! ----Fifth wheel load: 18,000 kg Axle load: 24,000 kg (technical) Gross weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany!!!! Chassis as a welded steel construction made from high-quality fine-grain steels Lashing rings 130 kN, 5 per side Additional lashing rings, 3 pairs on the raised platform Removable stanchion system made from galvanized steel with aluminum drop sides (silver anodized) Steel front wall approx. 400 mm high Foldable aluminum loading ramps with mechanical safety interlock Central lubrication system SKF with reservoir (brake light controlled), approx. 20 lubrication points Dimensions: Total length: 16,000 mm Bed length including rear section: 11,364 mm Coupling height: 1,330 mm Ground clearance at driving level: 184 mm Fifth wheel lead distance: 600 mm R1 dimension (from king pin to front): 410 mm (swing clearance radius) R2 dimension (from king pin to frame): 2,150 mm (swing clearance radius) Further dimensions available upon request (technical drawing) Axles: 2 x 12,000 kg (technical) Gigant axles with drum brakes, equipped with 8 x 245/70 R17.5" branded tires on Alcoa Dura Bright wheels Suspension: Pneumatic suspension with lift and lower function Second driving height + approx. 50 mm can be activated from the cab. At 20 km/h driving speed, the vehicle automatically lowers again. Incl. axle load manometer Coupling device: 2" kingpin (interchangeable, single position) WITHOUT support legs! -> Customers use a large timber beam placed under the front frame here. Brake system: Wabco EBS with axle load measuring system (smartboard) incl. odometer Parking brake: spring-loaded Lighting system: Taillights: 2 pairs (3-chamber lights) Side marker lights: LED Outline marker lights: LED Front and rear position lights: LED Reversing and auxiliary lights, each as round lights License plate light: LED 1 removable beacon, switchable from the cab via dedicated switch 4 LED work lights 4 oversize warning markers, double secured (wing nut and pin), with red/white LED illumination Steering: Tridec HF-E (hydraulic displacement steering on both axles) including automatic alignment and straight-line positioning. Tridec remote control (wireless remote control), also usable in wired mode Paintwork: Complete steel structure, shot-blasted after welding and primed with special adhesion primer. Final two-component paint finish in RAL color of your choice. Axles and wheel hubs in black, or painted in RAL color for an additional charge Other attachment parts are galvanized and/or painted/powder-coated, or made from aluminum (with or without anodizing) Approval: Including §13 inspection certificate Including §70 exemption certificate (Customer must provide a suitable and approved 3-axle tractor unit), includes, among other things, a swept path test at TÜV Nord in Meppen. Rjdpfxoxvz Skj Agzjck Financing, as well as leasing or hire purchase, is possible. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: new, power: 210 kW (285.52 HP), color: orange, Field of application: Mining Empty weight: 44.000 kg Productivity: 150 tph Mobile, trailer, dry, primary-secondary, crushing plant, Q=80-150 tph Rcedpfxjx D Dchs Agzjk the plant is used for work in soft and medium hard rock, max. input grain size – 650 mm, hopper (filling with a dumper or loader and excavator basket), grizzly or wooble feeder for eliminate clay,earth, production capacity 80 – 150 tons / hour, impact – rotary crusher, separation with 4 pcs. deck, three axle trailers, all belt conveyors, electrical cabinet of the plant, plant weight 44 tons, plant power P = 210 kW, SKF bearings and Siemens electronisc, from Germany. 2 years garantie.

Condition: used, mileage: 56,500 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, first registration: 05/2023, next inspection (TÜV): 05/2026, emission class: euro6, color: white, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), had accident, navigation system, second-hand vehicle warranty, soot filter, Special equipment: Driving assistance system: Driving Assistant, vehicle without model designation, electrically adjustable lumbar support for driver's seat, metallic paint, tyre repair kit (Mobility Pack), heated front seats, sun protection glazing (rear tinted) Additional equipment: Rcsdpfx Aextg Uxogzsk Storage package, passenger airbag deactivatable, driver/passenger airbags, Connected Professional package, exterior: High-gloss Shadow Line, electrically adjustable and heated exterior mirrors, exterior mirrors in vehicle colour, BMW Live Cockpit Plus, onboard computer, brake assist, DAB tuner (digital radio reception), roof rails in High-gloss Shadow Line, wheel theft protection (wheel locks), through-load system (rear centre armrest), dynamic brake light, Dynamic Stability Control (DSC) with extended features, Dynamic Traction Control (DTC), first aid kit, driver assistance system: Active Guard Plus (lane departure warning, front collision warning), driver assistance system: attention assistant, driver experience switch, remote tailgate release, velour floor mats, front footwell lighting, luggage compartment separation net, luggage compartment lighting, automatic tailgate operation, LED tail lights, interior trim: matt-grained Quartz Silver, 5-door body, 3-zone automatic climate control with automatic recirculation, rear head airbag system, front head airbag system, foldable rear headrests, multifunction sport/leather steering wheel, light alloy wheels, mild hybrid 140 kW (2.0 litre, 140 kW diesel engine), model update, Park Distance Control (PDC) front and rear, electric parking brake, tyre pressure monitoring system, Euro 6d emissions standard, LED headlights, rear side airbags, front side airbags, upholstery: Hevelius fabric, mirror package, start/stop system, warning triangle, widescreen display, tinted heat-insulating glass.

Condition: used, maximum load weight: 29,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2008, Equipment: ABS, * Benalu 3-axle grain tipper trailer * approx. 50 m³ Rcedox A Rkiepfx Agzjk * swing doors * 2 x grain discharge sliders * roll tarp * air suspension * BPW axles * EBS * ABS 3 units available

Condition: new, empty load weight: 6,100 kg, maximum load weight: 32,900 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, color: white, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, Reference number for inquiries: 69673 Reisch Alloy Tipping Trailer 54 m³ * Year of manufacture: New vehicle * ABS (Anti-lock Braking System) * Alloy rims * Air suspension * Lift axle * New tarpaulin * Neutral tarpaulin * Air supply coupling head (red & yellow) * 2 x 7-pin connector * 15-pin connector * Lifting and lowering device * Storage box / toolbox * Aluminium tipping body * Work platform * Rolling tarpaulin * Grain discharge chute * Combination doors * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 6,100 kg * Payload: 32,900 kg * Permissible total weight: 39,000 kg * Axle manufacturer: SAF * Tyre condition, 1st axle: 100% – Tyre size: 385/65 R22.5 * Tyre condition, 2nd axle: 100% – Tyre size: 385/65 R22.5 * Tyre condition, 3rd axle: 100% – Tyre size: 385/65 R22.5 * Tyre size: 385/65 R22.5 * Reisch Alubox-R * Capacity: 54 m³ * Combination door with 2 grain chutes * Fully welded profiles * Rear with trapezoidal wear plates * Steel access platform with dual-sided steps * Alcoa aluminium rims * ASPÖCK LED lighting * Holder for broom & shovel incl. accessories * Side underrun protection with stainless steel cladding * Tyre pressure monitoring system (TPMS) * Tyres: 385/65 R22.5 Dunlop SP 247 * SAF INTRADISC CD Ø430 ET120 * Warranty Rcjdpfewwqmcox Agzjk * Aluminium drop-down supports * Aluminium air tanks * More images and detailed technical description available on request Disclaimer: Specifications subject to change without notice. Intermediate sale and errors reserved. Additional images and videos available on our website. Our comprehensive service includes: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing solutions * Processing of all (export) documentation * Arrangement of export plates / customs plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer/delivery of commercial vehicles Please contact our qualified sales staff – we are happy to advise you.

Condition: like new (used), Auger Doser Rovema SDX – Precision Dosing for Powdered and Small-Grained Products The Auger Doser Rovema SDX is designed to handle nearly every powder and small-grained product, including milk powder, coffee, spices, sugar, and chemicals. Engineered for high hygienic standards, the SDX ensures efficient, precise dosing even with difficult products. This advanced dosing system offers a 35-liter hopper, a fill-level sensor, and a swivel-out screw, allowing for easy cleaning and quick tool changes, making it ideal for high-uptime production environments. The tailored screw design will be specifically catered to the characteristics of your product, ensuring reliable and consistent dosing performance. Rcedpfex Ai Awox Agzek

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT23502036713, empty load weight: 5,228 kg, maximum load weight: 26,772 kg, overall weight: 32,000 kg, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 7,200 mm, loading space width: 2,550 mm, loading space height: 1,600 mm, loading space volume: 27 m³, suspension: air, tire size: 385/65 R22.5", color: black, Year of construction: 2025, Chassis: Tipper Semi-Trailer Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Curved front bulkhead (patented) 24-ton two-speed landing gear, single-side operation, with semi-circular lower section and straight connecting plate, with load compensation Uncoupling under load is not possible; when uncoupled, the vehicle must be positioned sloped to the rear. Free rear swing radius approx. 2,100 mm in rear position and approx. 2,600 mm in forward position! 2 wheel chocks with holders Aluminum side underrun protection Pneumatically folding rear underrun guard, operable via switch in the truck on PIN 14 (without truck installation) and manually on the trailer Half-shell mudguards With anti-spray mudflaps only on the rearmost axle Tow hook at the rear (not available with Revolution model) Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles in off-road configuration "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Rcodpfxexclg Ss Agzek Air suspension Air bag pressure gauge 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and start-up assist, no truck installation required "Hot-dip galvanized lift axle mechanism" Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chromed, with HDK screw coupling, fixed section, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Hydraulic connection with hose and HDK screw plug NW = 48 mm, with knurled nut Body Steel round trough in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Interior with ladder at front wall. Greenline – conical and aerodynamic body shape Shovel and broom holder on the front wall exterior. "Membrane" tailgate Tailgate as hydraulic rear flap with large upward opening, approx. 2,200 mm clearance height. Protective cover for tailgate. Tailgate with rubber seal – Note! No guarantee on seal! Note! Heat-resistant up to max. 170°C! Continuous 4 mm side walls, floor 4/5 mm thick, wear- and weight-optimized construction. Fliegl S.T.E.P. – swiveling standing platform at the front with foldable access ladder for side entry on the front left, only in combination with "Flip Top sliding roof" Not printed without insulation "Flip Top sliding roof," automatic rear lock as folding bows. Cover moves forward. Electrically operated, with 7-pin socket (charging plug) at the front without connection cable (pin assignment: Pin1: +/ Pin3: -), including loose tractor socket, no truck installation, operation on trailer and via wireless remote control. 7-pin spiral cable to truck for sliding roof, truck must have socket (pin assignment: Pin1: +/ Pin3: -)

Condition: used, empty load weight: 6,100 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 11/2009, next inspection (TÜV): 10/2026, loading space length: 6,995 mm, loading space width: 2,300 mm, loading space height: 2,250 mm, loading space volume: 36 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2009, Equipment: ABS, Unladen weight: 6,100 kg, permissible total weight: 32,000 kg, cargo area (L x W x H): 6,995 mm x 2,300 mm x 2,250 mm. Tyre size: 385/65 R22.5, cargo volume: 36 m³, 1st axle: , 2nd axle: , air suspension, foldable underrun protection, electronic braking system (EBS), pendulum tailgate, sliding roof, connection plug 1x15 and 2x7 pin, grain tipper. You will find our complete vehicle range at . Interested in financing? With our Value Added Service, we offer customised financing options, full service and telematics solutions. We are happy to advise you. Rsdpfx Agsxr R T Nszock

Condition: new, functionality: fully functional, machine/vehicle number: V101VVNG4003ESGR0ZL180W, Year of construction: 2023, !! We would be happy to advise you !! Production orientation ////: Vertical Conveyor system ////: Feed and discharge optional and dependent on the product Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Speed ////: 20-60 bags/min. depending on material, packaging size and product Foil width ////: 100-320 mm Consumption ////: approx. 4KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 210 kg System dimensions ////: approx. 3560 x 1320 x 1500 mm System material ////: approx. 1500 x 960 x 1120 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer holder ////: matching ink wheel printer optional for an additional charge of EUR 1200 Rcedpeq Ikg Dofx Agzjk Delivery time ////: Current delivery time under 10 weeks Features: • Stainless steel version also suitable for the food industry • Application for powder, grains, liquids, paste/dough and small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Print mark sensor included • Automatic stopping for empty products (no product - no bag) • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Stainless steel finish / painting • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Gassing units for protective atmosphere (extend product shelf life) • Length-dependent product processing using photocell query

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 330 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, FMX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single bed. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Rcjdpevywf Ejfx Agzjk Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Redpfx Agevfxqyozock Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: refurbished (used), Introducing the Rovema VPL 260 Doypack + Reclose (Adhesive Strip) (VFFS)! Designed for flexibility and performance, the Rovema VPL 260 Doypack offers top-tier packaging solutions for a wide variety of products. With its sturdy construction and efficient design, this machine handles everything from pasta and cereals to sweets, pet food, and more. The VPL 260 delivers an impressive output of up to 70 bags per minute, offering a range of packaging options, including block bottom bags, and Ro pack bags with a zip. With the added reclose (adhesive strip) feature, it ensures maximum convenience for both the producer and end consumer. Key Features: • Brand: Rovema • Model: VPL 260 Rsdpfsx Ag Nusx Agzjck • Capacity: Up to 70 bags/min • Applications: Granules, pasta, cereals, grains, seeds, granola, muesli, sweets, candy, nuts, dried fruits, pet food, crackers, cookies, tea, dry pasta, and more • Packaging types: Block bottom bags, Ro pack bags with zip, Stabilo bags • Construction: Robust design for durability • Control system: User-friendly interface • Warranty: 3 months • Delivery time: On request Optional extras: Stabilo/Doy packaging, resealing strip (adhesive), and more – fully customizable for your specific needs. DL Packaging specializes in modernizing dosing systems, vertical form-fill-seal machines, cartoners, and end-of-line packers. Our "Second Life Packaging Solutions" are rebuilt to like-new standards and can be integrated into fully automated lines, all from a single source. With over 30 years of experience, in-house dosing expertise, and tailored advice, we ensure your machine or line is perfectly suited to your needs. We also offer remote support, maintenance contracts, and a warehouse with 20,000+ parts for seamless production. DL Packaging – your global partner for retrofitted packaging solutions, based in Oosterhout and a proud partner of the Rovema Group.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23502035606, empty load weight: 5,325 kg, maximum load weight: 26,675 kg, overall weight: 3,200 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,490 mm, suspension: air, tire size: 385/65 R22.5", color: grey, trailer brake: trailer braked, Year of construction: 2024, The images shown are archive photos; the vehicle may still be in use! Chassis for Tipper Semi-Trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions Kingpin installed in the forward position Curved front panel (patented) 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight mounting plate, with drawbar equalizer Unhitching under load is not possible; when unhitched, the vehicle must stand with a rearward slope. Free rear swing clearance approx. 2100 mm in the rear position and approx. 2600 mm in the forward position! Wheel chocks with holder Aluminum side underrun protection Foldable rear underrun protection Rear underrun protection with spring assist for easier operation Half-shell fenders Splash guards behind the last axle in asphalt design, hinged on the fender, with hook-up option at the top of the fender, fender shortened Tarp bar with holder Tow hook at the rear (not for Revolution model) Axles & Suspension BPW or SAF drum brake axles, manufacturer’s option Axles in off-road version "Axles/chassis laser measured" to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, operation via "3x braking" (starting aid functions up to a 30% axle overload and up to a max. speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" 10-year rust-through warranty Braking System 2-line compressed air braking system Color-coded lines for easier servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by traction vehicles capable of ensuring ABS function! With lift & lower valve Vehicle stability control system Paver brake, electrically controlled from the truck, without truck installation Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, manufacturer’s option Steel rims, factory silver Electrics 24 Volt, multi-chamber taillights, yellow LED side marker lights 2 white LED front position lights 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, without connecting cable 1 LED spotlight with integrated "Osprey" camera as trough camera (technical inspection required upon order) LED strobe light(s) at rear, controlled via switch in the truck, without truck installation, wired to pin 12 Upon order, specify pin allocation! Reversing camera system with color flat-screen monitor, wireless connection to monitor, monitor with suction mount and power supply via 24V vehicle socket Registration/Country & Plates Germany With Dekra approval and certificate (per §13 EC-FGV) 24/7 Service Hotline Body stability to EN 12642 Prepared for single-line license plate holder Conspicuity markings with reflective tape to ECE R 048, white at the side and red at the rear Rodpfx Agex Dkpnezeck Paintwork Frame: DB 7350 Novagrau "10-year rust-through warranty" Landing legs: Black coated Body/Side panel: Scania Urban Grey 2389173 Sliding tarp: RAL 7038 Agate Grey

Condition: good (used), 1 x Unifiller Systems Dual Head Rice Depositor Model: DDGD Year: 2016 Rcjdjxyxamepfx Agzsk

Condition: new, functionality: fully functional, machine/vehicle number: V101VVNG6004ESGR0ZL200H, Year of construction: 2023, Production orientation ////: Vertical Rcedjq Ikg Ispfx Agzjk Conveyor system ////: Feed and discharge optional and dependent on the product Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Speed ////: 20-110 bags/min. depending on material, packaging size and product Foil width ////: 100-320 mm Consumption ////: approx. 4.6KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 240 Kg System dimensions ////: approx. 1500 x 960 x 1220 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer mount ////: suitable incl. wheel printer optional for an additional charge of EUR 1200 Delivery time ////: Current delivery time under 10 weeks Features: • Stainless steel version also suitable for the food industry • Application for powder, grains, liquids, paste/dough and Small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Stainless steel finish / painting • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Length-dependent product processing using photocell query

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 330 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, FMX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single bed. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Rsdpovywgpsfx Agzsck Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: new, empty load weight: 6,160 kg, maximum load weight: 32,840 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, color: white, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, Reference number for inquiries: 69670 Reisch, Tipping Trailer 52m³ * Year of manufacture: New vehicle * ABS, Anti-lock Braking System * Alloy wheels Rodpfx Agexz N H Hozjck * Air suspension * Lift axle * New tarpaulin * Neutral tarpaulin * Air connection coupling head (red + yellow) * Connector plug: 2 x 7-pin * Connector plug: 15-pin * Lifting and lowering device * Storage/toolbox * Aluminium tipping body * Access platform * Rolling tarpaulin * Grain discharge slides * Combination doors * Suspension: Air * Gross weight: 39,000 kg * Unladen weight: 6,160 kg * Payload: 32,840 kg * Perm. gross weight: 39,000 kg * Axle manufacturer: SAF * Tyre condition 1st axle: 100% - Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 100% - Tyre size: 385/65 R22.5 * Tyre condition 3rd axle: 100% - Tyre size: 385/65 R22.5 * Tyre sizes: 385/65 R22.5 * Reisch Alubox-R * Volume: 52m³ * Combination door with 2 grain discharge slides * Continuously welded profiles * Trapezoidal wear plates on rear * Steel standing platform with dual-side access * Alcoa aluminium rims * LED lighting by ASPÖCK * Broom & shovel holder incl. accessories * Side underrun protection with stainless steel cover * Tyre pressure monitoring system (TPMS) * Tyres: 385/65 R22.5 Dunlop SP 247 * SAF INTRADISC CD Ø430 ET120 * Warranty * Aluminium folding supports * Aluminium air tanks * Further images and technical description available on request Disclaimer: Specifications are subject to change, prior sale and errors excepted. More images and videos can be found on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export/transit license plates * Vehicle preparation: new tarpaulins, labels, paintwork, etc. * Professional loading and load securing * TÜV inspections, registration service * Vehicle delivery Please contact our trained specialists – we are happy to advise you.

Condition: good (used), functionality: fully functional, machine/vehicle number: WKY3S0139PM046963, empty load weight: 6,100 kg, maximum load weight: 29,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 10/2026, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 1,800 mm, loading space volume: 37 m³, suspension: air, tire size: 385/65 R 22.5, color: black, Equipment: ABS, our vehicle number: #30623 Kempf SKM 36/3 aluminium tipper body 37m³ IPH tipping cylinder Teflon floor Pendulum tailgate Watertight (mud-tight) Grain discharge slide Pneumatic lock Loading pressure gauge Roll-up tarpaulin Platform with ladder BPW axles Tyres 385/65 R 22.5 Rcjdpfxsxp Hv Ij Agzok Aluminium rims Disc brakes Lift/lower function Air suspension ABS EBS Haacon drop-down support legs Foldable rear underrun protection Side underrun protection Tool box Fire extinguisher box 2x work lights Financing/leasing available on request!

Year of construction: 2024, condition: new, The Agricracker AC100 is a milling machine for structure milling. Grains, beans & seeds are welknown applications. Even as fet and wet products, which are better grindable then known milling machines. Capacity 0-3 ton / hour. Flyer at the bottom of this page. Milling trials are possible. Redpfx Agjg Ugbgjzeck

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, MX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single axle. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. Rcsdpsvywgijfx Agzek ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height