Used Haas St for sale (214)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. With 2 sections. See PDF file for sketch. Fedpfxszn N Tye Apwogf Trough inner width 600 mm. Drive via geared motor with 4.0 kW.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,936 h, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, overall weight: 14,334 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS VF-10/50 was manufactured in 2022. It features an impressive X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 3048 x 711 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 35.0 in (889 mm) • Spindle nose to table (min): 5.0 in (127 mm) • Spindle • Max torque: 340 ft‑lbf @ 700 rpm (460 Nm @ 700 rpm) • Drive system: 2‑speed gearbox • Bearing lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 120.0 in (3048 mm) • Width: 28.0 in (711 mm) Fodpezh Hlajfx Apwegf • T‑slot width: 0.626–0.630 in (15.90–16.00 mm) • T‑slot center distance: 4.92 in (125 mm) • Number of T‑slots: 5 • Max table load (evenly distributed): 4000 lb (1814 kg) • Feedrates • Max cutting feed: 360 ipm (9.1 m/min) • Rapids: X 360 ipm (9.1 m/min), Y 600 ipm (15.2 m/min), Z 600 ipm (15.2 m/min) • Axis motors (max thrust) • X: 3400 lbf (15,124 N) • Y: 4100 lbf (18,238 N) • Z: 5600 lbf (24,910 N) • Tool changer • Type: SMTC • Capacity: 30+1 • Max tool diameter (all pockets full): 4.0 in (102 mm) • Max tool diameter (adjacent pocket empty): 10.0 in (254 mm) • Max tool length (from gage line): 16 in (406 mm) • Max tool weight: 30 lb (13.6 kg) • Tool‑to‑tool (avg): 4.2 s • Chip‑to‑chip (avg): 6.3 s • General • Coolant capacity: 95 gal (360 L) • Air requirements • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Electrical • Drive system: 2‑speed gearbox • Input AC voltage (3‑phase) low: 220 VAC, 70 A (FLA) • Input AC voltage (3‑phase) high: 440 VAC, 35 A (FLA) • Dimensions – shipping • Domestic pallet: 288 in x 102 in x 132 in (732 cm x 260 cm x 336 cm) • Export crate: 288 in x 105 in x 134 in (732 cm x 267 cm x 339 cm) • Domestic pallet with EC option: 288 in x 102 in x 140 in (732 cm x 260 cm x 356 cm) • Export crate with EC option: 288 in x 105 in x 141 in (732 cm x 267 cm x 359 cm)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,104 h, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 8,100 rpm, number of axes: 3, This 3-axis HAAS VF-2 was manufactured in 2017. It features an X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2 vertical machining centre we have for sale. Contact us for further details. Fjdpfxozh Hf To Apwogf

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,016 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VM-6 was manufactured in 2018. It features an impressive X-axis travel of 1,626 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details. Fgedpjzh Hgdjfx Apwsf

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,326 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 207 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-6SS was manufactured in 2016. It features impressive X, Y, and Z travels of 1,626 mm, 813 mm, and 762 mm respectively, along with a high-power 22.4 kW spindle capable of reaching 12,000 rpm. The machine includes a high-speed side-mount tool changer with 24+1 stations and a robust table load capacity of 907 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-6SS vertical machining centre we have for sale. Contact us for further details. • Travels: X 1,626 mm; Y 813 mm; Z 762 mm; spindle nose to table 102–864 mm • Table: 711 × 1,626 mm; 5 × 16 mm T-slots; 125 mm T-slot pitch; max table load 907 kg • Spindle: max torque 122 Nm @ 2,000 rpm; ABEC Class 7 bearings; electronic orientation; water-cooled spindle head; BT40; through-spindle air blast; tool release button • Tool changer: • Standard side-mount 24+1, BT40; all-electric bi-directional; max tool Ø 76 mm (full), 127 mm (adjacent pockets empty); max tool weight 5.4 kg; tool-to-tool 2.3 s; chip-to-chip 3.2 s • Optional 40+1: tool-to-tool 2.8 s; chip-to-chip 3.6 s; max tool Ø 76 mm (full), 152 mm (adjacent pockets empty) • Feed rates: rapid traverse X/Y/Z 30.5 m/min; max cutting feed 21.2 m/min • Motors/Drives: axis max thrust (X/Y/Z) 15,124 N; direct-coupled servo motors; brushless servo motors; Vector Drive (Y-Δ) • Coolant & lubrication: 360-litre pull-out coolant tank; automatic lubrication system • Construction & enclosure: rigid cast iron construction; triangular wide-base castings; heavy-duty sheet steel enclosure; 14-gauge cold-rolled steel; free-flow enclosure design; door opening width 1,549 mm • Machine size & utilities: max height 3,378 mm; width 5,232 mm; depth 3,835 mm (door open); compressed air 113 l/min @ 6.9 bar; electrical 380 VAC, 3-phase, 50–60 Hz; installed power 28 kVA • Controls/Functions: Rigid tapping; Remote Hand Jog (RJH); tool load monitoring; 5 spare M-functions • Accuracy/Quality: 100% ballbar test for 3D squareness and machining accuracy Fjdjzh Hbnjpfx Apwsgf • Other: high-power cartridge spindle; high-speed side-mount tool changer (24+1); easily accessible coolant tank; 1-year parts and labour warranty Additional equipment • None listed (no robots, automation, chip conveyor, bar feeder, or other external accessories specified)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 Fgsdpfx Ajzh Eh Tepwjf • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,775 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine. Fjdpfxjzhwx De Apwsgf • Capacities (S.A.E / Metric) • Chuck size: 10.0 in (254 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BMT65 turret): 13.75 in (349 mm) • Max cutting length (varies with workholding): 32.5 in (826 mm) • Bar capacity: 3.00 in (76 mm) • Between centers: 32.5 in (826 mm) • Feedrates (S.A.E / Metric) • Rapids on X: 472 ipm (12.0 m/min) • Rapids on Y: 472 ipm (12.0 m/min) • Rapids on Z: 945 ipm (24.0 m/min) • Axis Motors (S.A.E / Metric) • Max thrust X: 4100 lbf (18,238 N) • Max thrust Y: 2300 lbf (10,231 N) • Max thrust Z: 5100 lbf (22,686 N) • Main Spindle (S.A.E / Metric) • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275.0 ft-lbf @ 500 rpm (373.0 Nm @ 500 rpm) • Draw tube bore: ø 3.0 in (76 mm) • Spindle bore: ø 3.50 in (88.9 mm) • Main Spindle C Axis (S.A.E / Metric) • Max speed: 60 rpm • Max rating: 5.0 hp (3.7 kW) • Positioning (±): 0.01° • Brake diameter: 13.9 in (353 mm) • Brake holding torque: 250 ft-lbf (339 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle (S.A.E / Metric) • Chuck size: 8.3 in (210 mm) • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp (11.2 kW) • Max speed: 4000 rpm • Max torque: 100.0 ft-lbf @ 870 rpm (135.6 Nm @ 870 rpm) • Spindle bore ø (non-through): 0.81 in (20.7 mm) • Secondary Spindle C Axis (S.A.E / Metric) • Max rating: 5.0 hp (3.7 kW) • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in (216 mm) • Brake holding torque: 140 ft-lbf (190 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle Positioning (M119) (S.A.E / Metric) • Positioning (±): 0.02° • Brake diameter: 8.5 in (216 mm) • Control type: Positioning only • Turret (S.A.E / Metric) • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in (102.0 mm) • Live Tooling (S.A.E / Metric) • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General (S.A.E / Metric) • Coolant capacity: 55 gal (208 L) • Air Requirements (S.A.E / Metric) • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Air pressure min: 80 psi (5.5 bar) • Electrical Specification (S.A.E / Metric) • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp (22.4 kW) • Input AC voltage (3 phase) - Low: 220 VAC; Full load amps (Low): 70 A • Input AC voltage (3 phase) - High*: 440 VAC; Full load amps (High*): 35 A • Dimensions - Shipping (S.A.E / Metric) • Domestic pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) • Export pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Additional equipment • Bar feeder Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, overall weight: 7,000 kg, controller manufacturer: HAAS, number of axes: 3, This 3-axis HAAS SL 30TBHE was manufactured in 2007. It features a maximum turning diameter of 406 mm and a maximum turning length of 864 mm. The machine is equipped with a chuck diameter of 315 mm and a spindle bore of 103 mm. If you are looking to get high-quality turning capabilities, consider the HAAS SL 30TBHE CNC lathe we have for sale. Contact us for further details. • Configuration: 3-axis machine with driven tools; no counter spindle • Spindle bore: 103 mm • Chuck diameter: 315 mm • Max turning diameter: 406 mm • Max turning diameter over saddle: 368 mm • Max turning length: 864 mm • Tool turret capacity: 12 positions • Live tooling: Yes Additional equipment • Included tooling: 1 live tool + additional accessories (unspecified) Technical Specification Counter Spindle No Fgjdpezhwlqofx Apwsf Driven Tools Yes

Condition: excellent (used), Year of construction: 2011, feed length X-axis: 813 mm, feed length Y-axis: 508 mm, feed length Z-axis: 711 mm, HAAS EC-500 Horizontal Machining Center Manufacturer: HAAS Automation Model: EC-500 Year of Manufacture: 2011 Control System: HAAS CNC Country of Origin: USA Machine Description Fodpfxoza Ucre Apwjgf HAAS EC-500 Horizontal Machining Center in very good technical and visual condition. The machine is equipped with a dual pallet changer and a 4th-axis rotary table, enabling efficient multi-sided machining in a single setup. Ideal for precision machining and high-volume production. Technical Specifications * X-axis travel: 813 mm * Y-axis travel: 635 mm * Z-axis travel: 711 mm * Pallet size: 500 x 500 mm * Number of pallets: 2 * Automatic pallet changer * Maximum workpiece diameter: 750 mm * Maximum workpiece height: 927 mm * Maximum pallet load: 400 kg * Spindle speed: 12000 rpm * Spindle power: 22.4 kW * Spindle taper: BT40 / CT40 * Inline Direct Drive spindle * Tool magazine capacity: 70 tools * Tool-to-tool change time: 2.8 sec * Coolant tank capacity: 360 L * CNC Control: HAAS * Number of axes: 4 Equipment * Dual pallet changer * Rotary 4th axis (B-axis) * Tool holders included * Chip conveyor * Coolant system * HAAS CNC Control Condition The machine is in good working condition and can be inspected under power. Test run available upon request. Included in the Price * Tool holders visible in the photos * Machine loading included in the price

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Y 400 mm Z 500 mm 10.000 rpm Fgodpfx Apewx Rafjwof

Condition: excellent (used), Year of construction: 2016, With B + C axis Working travels 762 x 508 x 508 mm Table diameter 500 mm Spindle taper 40 Spindle speeds -12'000 rpm Fgodolhqydspfx Apwsf Tool changer 40 Pos. Control HAAS Coolant through spindle Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2014, functionality: fully functional, The machine is in good technical condition, and an inspection while running can be arranged. Includes a 4th axis. Work area and table: Table dimensions: 914 × 356 mm Fgsdpsznx Nwofx Apwof Travel in the X-axis: 762 mm Travel in the Y-axis: 406 mm Travel in the Z-axis: 508 mm Distance from the spindle nose to the table: 102 to 610 mm Maximum table load: 680 kg Spindle (Super Speed specification) Spindle taper: ISO 40 (Inline Direct-Drive) Maximum spindle speed: 12,000 rpm Spindle motor power: 22.4 kW (30 HP) Torque: 122 Nm at 2000 rpm Tool changer (ATC) Changer type: Rapid side-mount tool changer Changer capacity: 24+1 positions (optionally 30+1) Tool change time (tool-to-tool): approx. 1.8 seconds Feeds and drives Rapid traverse rates in X, Y, and Z axes: 35.6 m/min (compared to 25.4 m/min for the standard VF-2 version) Maximum working feed rate: 21.2 m/min Guide type: Linear ball bearings in all axes Dimensions and weight Machine footprint (W × D × H): approx. 2.51 × 2.36 × 2.57 m (height depends on the Z-axis elevation) Machine weight: approximately 3,540 kg

Condition: excellent (used), Year of construction: 2010, Excellent condition can be demonstrated if required we also have a video of it running we have also got a tailstock if required Fjdpfx Apeq Rcilswogf

Condition: excellent (used), HAAS TR310 TRUNNION TABLE EXELENT CONDITION TESTED CAN BE SHOWN WORKING Fgedenp Iyhopfx Apwjf

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range, X-axis: 2,134 mm Travel range, Y-axis: 813 mm Travel range, Z-axis: 762 mm Max. spindle speed: 8,100 rpm Spindle motor power: 22.4 kW Max. torque: 122.0 Nm at 2,000 rpm Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg Number of tool magazine slots: 31 Distance from spindle nose to machine table (max.): 864 mm Distance from spindle nose to table (min.): 102 mm Fsdpjzg Drzjfx Apwogf MACHINE DETAILS Control system: HAAS Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg EQUIPMENT Documentation/Manual Chip conveyor

Condition: used, Year of construction: 2007, Haas VM-2 CNC Vertical Machining Center (2007) Fedpfx Apszpattowsgf With 24-Tool ATC and chip auger Offerors are required to download the seller required document from the link below. For sales within Israel, offerors should complete section 1 only. For export sales, offerors should complete and return sections 1 and 2. Please note the Removal Instructions in listing, which form part of the terms of sale.

Condition: excellent (used), Year of construction: 2013, Haas-Mondomix -Buhler , A-15, 2013, continuous aerator for mixing and whipping, marshmallow & nougat, choco pie, chocolate and creams for sugar confectionary and bakery with Touch screen control, Fgsdpfxof Azwzs Apwsf with product pump In good condition. with mondotherm

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration unit Fsdpfx Apszdqcuewsgf Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:YAG laser with Hurryscan 10 - galvanometer head from Scanlab Fuchs extraction and filtration unit TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted individually Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, HAAS Wood Chip Screening Machine Manufacturer: HAAS Recycling Systems Country of origin: Germany Type: Vibrating chip screen Designed for screening wood chips, bark and biomass materials Suitable for separating fine particles and contaminants Vibrating screening system Multiple material discharge fractions Approximate dimensions: Length: 4.29 m Width: 2.10 m Fedpfxozmfq So Apwsgf Suitable for woodworking and biomass processing industries

Condition: used, Year of construction: 2014, operating hours: 7,500 h, 5-AXIS MACHINING CENTER BRAND: HAAS VF-3 SS YEAR OF FIRST INSTALLATION: 2014 TABLE DIMENSIONS: 1,219 mm x 457 mm MAXIMUM TABLE LOAD: 800 KG TRAVEL: Fedpfxozminno Apwegf X: 1,016 mm Y: 508 mm Z: 635 mm SPINDLE SPEED: 12,000 RPM TOOL MAGAZINE: 40 POSITIONS HIGH PRESSURE / INTERNAL SPINDLE COOLING RENISH PROBE PRESETTING ADJUSTABLE COOLANT NOZZLE

Condition: used, Year of construction: 2015, operating hours: 17,260 h, functionality: fully functional, machine/vehicle number: 1121106, rotational speed (max.): 15,000 rpm, spindle nose: BT40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Haas 750SS 5 Axis Milling Machine Machine built 2015 and has been well maintained. Only making Aluminium components. Manufacturing parts for the motorcycle market. 5-axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centres are cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750SS has an integrated high-speed, dual-axis trunnion table with a 500 mm diameter platter that features standard T-slots and a precision pilot bore for fixturing versatility. The trunnion provides +120 and -35 degrees of tilt and 360 degrees of rotation to provide excellent tool clearance and large part capacity. Fsdpfjzic Tpjx Apwsgf • 5-axis simultaneous machining • Powerful inline direct-drive spindle • High-speed trunnion table • Thru spindle coolant, bed wash and flood coolant • Swarf Conveyor BT40 Spindle with spindle speed up to 15,000 rpm 39 Tool carousel, with pre select. Tool probe and Tool Setting function The machine is still in daily use, the hours will increase as a result. Viewing by prior arrangement. Buyer to arrange collection at their own expense. Price is £55,000 plus Vat where applicable. Sold Ex Works

Condition: good (used), Parts on table not come. Marked with red. Fgodpfjwxdyxox Apwof

Condition: good (used), Year of construction: 2006, Haas VF-5B/40HE vertical machining center, year 2006. Fedpfx Apozcu Imjwjgf

Condition: used, Vertical machining center, Haas MiniMill, year 2005... Fgodpsy Idpxefx Apwsf

Condition: new, Coolant mixer for Haas CNC machines. Fgodpfx Apezllbhswjf