Used Haas St for sale (226)

Year of construction: 2009, condition: used, NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control Additional title: refrigerant ammonia Brew water flow: 5 m3/h 2 bar Fedpfx Amexbn Upo Esgi Ice water flow: 15 m3/h 2 bar Refrigerant capacity: 85 kg Ammonia Compressor capacity: 145 m³/h Power: Q0: 2 x 119 kW Operation / Control: Siemens S7 Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pumps ( 2.2 kW, 15 m3/h, 2 bar ); brewing water pump ( 1.1 kW, 5 m3/h, 2 bar ); expansion tank, max. permissible operating pressure: high pressure side: 22 bar, low pressure side: 16 bar

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Fgodpfxjzd Tcde Am Esi TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 8,100 rpm, number of axes: 3, This 3-axis HAAS VF-8 vertical machining center was manufactured in 2006. It operates on a voltage of 360-480, with a phase 3 and frequency of 50/60 Hz. The full load capacity is 20 AMPS, with a largest load of 35 AMPS. Consider the opportunity to buy this HAAS VF-8 vertical machining center. Contact us for more information. • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full-load current: 20 A • Largest load current: 35 A • SK40 • Inernal cooling through spindle 21 bar Fgjdpfxjx D Ep Aj Am Eji • Side-mounted 24-tool changer • Spiral chip conveyor • Programmable coolant nozzle • New gearbox and spindle installed • the following components were renewed:GearboxVector drive, spindle driveDecember 2024: Double arm tool arm

Condition: excellent (used), HAAS Mini Mill 2 Vertical Machining Centre Year 2010 Serial number 1081104 X axis travel 508 mm Y axis travel 406 mm Z axis travel 356 mm Table size 1,016 × 356 mm Maximum table load 227 kg Spindle nose to table 102–457 mm Fgodpfx Aez N Alwjm Eji Maximum spindle speed 6,000 rpm Maximum spindle power 5.6 kW / 7.5 hp Spindle taper 40 taper — CT40 or BT40 to confirm Automatic tool changer 10 station

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. • Distance spindle–table: 102 mm • Tool holder taper: CT40 (DIN 69871) Fgodpfsx D Irmox Am Eei • Max cutting feed: 20.5 m/min • Rapid feed (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment • Screw-type chip conveyor • Auxiliary high-pressure filtration system

Condition: excellent (used), functionality: fully functional, rotary table diameter: 310 mm, The TR310 is a dual-axis tilting rotary table that provides maximum rigidity and accurate performance for 3+2 and full 5-axis machining of medium to large parts. Scale feedback on the A (tilting) axis improves positioning accuracy and repeatability. Add 4- and 5-axis capabilities to your machine. Easy plug-and-play connection to Haas machines. Industry-leading performance and capabilities. Fodpfx Ajztakaom Ejgi Heavy-duty design.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5SS was manufactured in 2016. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and a 24-position tool magazine. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5SS vertical machining centre we have for sale. Contact us for further details. • T-slots: 7 • Max spindle torque: 122 Nm @ 2000 rpm • Rapid feed: 30 m/min • Tool magazine: 24 positions Fodpfxeypb A De Am Esgi Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 740 mm Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Tool holder: SK40 Fgedpfx Aszcpplsm Eoi Tool changer: 24 positions Control system: HAAS Version M15 Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. • Electrical: • Voltage: 354 / 488 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Machine hours (from control): • Power on time: 19,635 h • Cycle start time: 8,564 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 side-mount ATC Fgjdpfx Aox D I Smsm Eei • Control unit: Haas CNC Control

Condition: used, Year of construction: 2020, workpiece weight (max.): 5 kg, table width: 267 mm, table length: 1,466 mm, table load: 159 kg, tool diameter: 89 mm, Used Machining Center Brand: Haas Model: TM-2P Year: 08/2020 Serial Number: 1170479 Operating hours: Spindle on time: 12,000h Specifications: - Travels (X, Y, Z): 1016mm, 406mm, 406mm - Spindle to table distance (Min. - Max.): 102 - 508mm - Spindle speed: 6000 rpm - Spindle power: 5.6 kW - Taper: BT 40 - Tool changer carousel: 10 positions - Maximum tool diameter: 89mm (adjacent) - Maximum tool weight: 5.4kg - Coolant pump kit - HAAS CNC - Table dimensions: 1466x267mm Fjdpsxqc H Ssfx Am Eogi - Maximum table load: 159kg - Maximum feed rates on all three axes: 10.2m/min.

Condition: used, HAAS Wood Chip Screening Machine Manufacturer: HAAS Recycling Systems Fgjdpfozmfq Sjx Am Eji Country of origin: Germany Type: Vibrating chip screen Designed for screening wood chips, bark and biomass materials Suitable for separating fine particles and contaminants Vibrating screening system Multiple material discharge fractions Approximate dimensions: Length: 4.29 m Width: 2.10 m Suitable for woodworking and biomass processing industries

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, The machine can be inspected while powered on during production! Fedozg Drzspfx Am Eegi TECHNICAL DETAILS Travel range, X-axis: 2,134 mm Travel range, Y-axis: 813 mm Travel range, Z-axis: 762 mm Max. spindle speed: 8,100 rpm Spindle motor power: 22.4 kW Max. torque: 122.0 Nm at 2,000 rpm Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg Number of tool magazine slots: 31 Distance from spindle nose to machine table (max.): 864 mm Distance from spindle nose to table (min.): 102 mm MACHINE DETAILS Control system: HAAS Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 3-axis HAAS VF 7/50 was manufactured in 2017, featuring extensive axis travels with X-Axis at 2,134 mm, Y-Axis at 813 mm, and Z-Axis at 762 mm. It supports a maximum workpiece weight of 1,814 kg and includes a spindle speed up to 7,500 rpm. Ideal for robust machining tasks, consider the opportunity to buy this HAAS VF 7/50 vertical machining centre. Contact us for more information about this machine. • Spindle-to-table distance: 127–889 mm • Table • Dimensions: 2,134 × 711 mm • T-slots: 5 Fsdpfxsx Imrps Am Eegi • T-slot width: 125 mm • Max workpiece weight: 1,814 kg • Spindle • Tool holder taper: CT 50 • Tool magazine • Tool capacity: 30 + 1

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 406 mm Travel Z-axis: 508 mm Table length: 914 mm Table width: 356 mm Table load capacity: max. 680 kg Spindle speed: 12,000 rpm Fgsdpfjx Up Dhsx Am Eji Feed Rapid traverse X-axis: max. 35.6 m/min Rapid traverse Y-axis: max. 35.6 m/min Rapid traverse Z-axis: max. 35.6 m/min Tool Changer Capacity: 24+1 Tool holder: CAT 40 Max. tool diameter: 76 mm Tool change time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Machine weight: 3,629 kg

Condition: used, Year of construction: 2008, turning diameter 432 mm Fgsdpfx Amoupmhws Esi turning length 864 mm control HAAS bar diameter 76 mm 3-jaw-chuck diameter 254 mm travel -z axis 864 mm travel -x axis 287 mm spindle speed: 3400 1/min spindle bore 88 mm swing over bed 762 mm swing diameter over bed slide 432 mm turret head 12 Pos. VDI 40 drive capacity - spindle motor 22 kW voltage 400 V weight of the machine ca. 7.250 t dimensions of the machine ca. 3,90 x 2,00 x 1,90 m - serial-no.: 3082298 - Machine Run Time: ---- h - control: HAAS - tool measuring arm - chip conveyor - collant equipment

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, max table weight 300kg, table tilt +120°, -35°, 22.4kW, 12000rpm, CT40, 40 station tool changer, Fgodpfx Amjkticxe Esi coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: ready for operation (used), Year of construction: 2016, operating hours: 12,118 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rotary table diameter: 500 mm, spindle speed (max.): 12,000 rpm, Machine already disassembled! TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Max. spindle speed: 12,000 rpm Spindle motor power: 22 kW Spindle taper: BT40 Number of tool magazine slots: 40 MACHINE DETAILS Control manufacturer: HAAS Dimensions & Weight Dimensions (L x W x H): 4,014 x 3,046 x 3,048 mm Weight: 6,500 kg Operating Hours Power-on hours: 16,142 h Cutting hours: 12,118 h EQUIPMENT Central spindle cooling system 20 bar Filtration Chip conveyor belt Workpiece probe Tool probe Fgjdpfx Ajypbhtem Eei Robot interface Automatic (side) door Handheld control unit Cleaning pistol High-speed machining

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 3098034, travel distance X-axis: 203 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 1,800 rpm, bed width: 445 mm, center width: 900 mm, TECHNICAL DETAILS Swing diameter over bed: 900 mm Centre height: 450 mm Centre distance: 900 mm Bed width: 445 mm X-axis travel: 203 mm Z-axis travel: 762 mm Spindle bore: 60 mm Max. spindle speed: 1,800 rpm MACHINE DETAILS Control: CNC Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,600 x 1,950 mm Weight: 2,000 kg Transport packages: 2 pcs EQUIPMENT Documentation Fgodpfey Rxxmsx Am Eji CE marking

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Full 4th axis Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power Fgjdpfx Asvgmr Iem Eji !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

Condition: excellent (used), Year of construction: 2013, Haas-Mondomix -Buhler , A-15, 2013, continuous aerator for mixing and Fgedpfx Aef Azwzsm Esi whipping, marshmallow & nougat, choco pie, chocolate and creams for sugar confectionary and bakery with Touch screen control, with product pump In good condition. with mondotherm

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4 was manufactured in 2017. It features an X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a maximum spindle speed of 8,100 RPM and a robust table size of 1321 mm x 495 mm, supporting a maximum weight of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. • Spindle taper: CT 40 • Max torque: 122.0 Nm @ 2000 rpm • Table dimensions: 1321 x 495 mm • Max weight on table: 794 kg • Tool changer: 20 positions (umbrella type) Fodpfjy Sg H Uox Am Esgi • Rapid feedrate (X/Y/Z): 25.4 m/min • Table to spindle nose (min/max): 107 / 742 mm • T-slots: 5 slots, 16 mm width, 80 mm pitch • Power-on time: 18673:41:20 • Cycle start time: 3974:33:16 • Feed cutting time: 2117:17:34 • Included machine options/features: 15" color monitor, rigid tapping, USB port Additional equipment • Programmable coolant nozzle • Auger-type chip conveyor

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis HAAS VF-8 vertical machining center was manufactured in 2003. It features a 1626 x 1016 x 762 mm travel range, a 15.4 kW spindle power, and a maximum spindle speed of 7500 rpm. Equipped with a BT-40 tool holder, a 24+1 position tool changer, and a screw-type chip conveyor. If you are looking to get high-quality milling capabilities consider the HAAS VF-8 machine we have for sale. Contact us for more information. • Distance spindle–table: 102 mm Fgedpfx Amex D H Ruj Esi • Max cutting feed: 12 m/min • Rapid feed (X/Y/Z): 18 m/min • Tool changer type: Random vertical • Tool magazine capacity: 24 + 1 positions • CNC memory: 1 MB • Monitor: 15" color • Data interface: RS232 • Rigid tapping: Yes • Options/features included: • 2-speed gearbox spindle • 4th axis drive and wiring • Intuitive programming system • Coordinate rotation system • Macro variables and scaling functions • Programmable coolant nozzle • Internal work light Additional equipment • Screw-type chip conveyor Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2005, turning diameter 250 mm turning length 700 mm control FANUC weight of the machine ca. 3,35 t HAAS SL-30THE CNC Lathe – Manufactured in 2005 Technical Specifications - Max. turning diameter: 250 mm - Max. turning length: 700 mm - Number of axes: 2 - X-axis travel: 287 mm - Z-axis travel: 864 mm - Spindle bore: 69 mm Fjdpfjzvq Dvex Am Esgi - Max. spindle speed: 3,400 rpm - Tool turret: 12-station - Tool holder: VDI 40 - Power supply: 360–480 V, 3-phase, 50/60 Hz - Rated power: 22 kW - Max. connected load: 70 A - Full-load current: 40 A - CNC control: FANUC Features - 12-position tool turret - VDI-40 tool holder - Hydraulic chuck - Hydraulic tailstock - Chip conveyor - Coolant system - Full enclosure with safety interlock - Suitable for single-part and series production - Technical documentation

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 3,200 rpm, travel distance X-axis: 318 mm, travel distance Z-axis: 660 mm, spindle motor power: 224,000 W, total height: 1,900 mm, overall weight: 7,200 kg, product length (max.): 3,800 mm, number of axes: 2, This HAAS SL-30 was manufactured in 2003. A robust horizontal turning machine featuring X/Z travel of 318/660 mm, turning diameter of 533 mm, and length of 660 mm. It includes a bar capacity of 76 mm, spindle power of 22.4 kW, and a maximum spindle speed of 3,200 rpm. Equipped with a 12-position tool turret and a semi-automatic hydraulic tailstock. Consider the opportunity to buy this HAAS SL-30 horizontal turning machine. Contact us for more information. • Turning diameter: 533 mm • Turning length: 660 mm • Spindle nose: A2-6 • Bar capacity: 76 mm • Spindle bore diameter: 254 mm • Max cutting speed: 10.2 m/min • Rapid feed rate: 24 m/min • Tool presetter: Yes Fgedox D Irgjpfx Am Eei • Tailstock: Semi-automatic hydraulic • Tool turret: 12 positions, VDI 40 Additional equipment • Chip conveyor: Screw type • Bar feeder: LNS Quik Load Servo III Dimensions Machine Depth 1800 mm

Condition: used, Year of construction: 2006, centre height 175 mm centre distance 300 mm number of spindle speeds 2.000 - 8.000 control SIEMENS - 840 D machine weight ab. 7.500 kg surface area 1.000 x 270 mm number of T-slots 3 groove width 12 H7 mm flute distance 50 mm spindle diameter in front bearing 55 mm Tool and Cutter Grinder | HAAS - MULTIGRIND AF1 Fsdemd Didopfx Am Esgi Additional equipment: - Tool laser measuring system: Blum - Lasersystem MINI-MICRP-NANO The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: AF 1 | AF-1