Used Haas Vf 6 for sale (248)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1062021, controller manufacturer: HAAS/FANUC, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS Spindle speed max.: 10,000 rpm MACHINE DETAILS Nodpfxoxuidxj Ag Ioku Tool changer: 40-fold Tool holder: BT40 Control: HAAS/FANUC

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, table load: 794 kg, TECHNICAL DETAILS Travel X: 1,270 mm Travel Y: 508 mm Travel Z: 635 mm Rapid traverse speed X/Y/Z: 35.6 m/min Distance spindle nose to table max.: 742 mm Distance spindle nose to table min.: 107 mm Max. spindle speed: 12,000 rpm Spindle drive power: 22.4 kW Njdoxtbtispfx Ag Isku Table dimensions: 1,321 x 495 mm Max. table load: 794 kg Tool changer positions: 24+1 Max. tool weight: 5.4 kg Tool change time: 1.8 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,000 x 2,500 x 2,600 mm Weight: approx. 6,800 kg Cycle start time: approx. 10,100 h Feed time: approx. 7,100 h EQUIPMENT Haas control with synchronous tapping Wireless probing system Coolant system with programmable coolant nozzle Spiral chip conveyor

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: 1106086, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 356 mm, table length: 914 mm, The machine's tool changer is defective. The repair costs for this are approximately €8,000 - €10,000. The axis wear corresponds to the typical wear for a machine of this year of manufacture. TECHNICAL DETAILS Travel Paths X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table Length: 914 mm Width: 356 mm Max. table load: 680 kg Spindle Spindle taper: SK-40 Spindle drive: 22.4 kW Speed: 12,000 rpm Tool Changer Tool changer: 24+1 magazine positions Feed Rates Rapid traverse: 35.6 m/min Nsdpfxjw Axkye Ag Ioku MACHINE DETAILS Electrical Data Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full load current: 40 A Maximum load: 70 A Short-circuit interrupting capacity: 10,000 A Short-circuit current: 5,000 A RMS symmetric Operating Dimensions Max. operating height: 2,667 mm Max. operating width: 3,175 mm Max. operating depth: 2,769 mm EQUIPMENT Key switch for program lock Synchronized thread tapping 208-liter coolant system with continuous coolant supply 15" color LCD monitor with USB port

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 1096687, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table length: 400 mm, table width: 1,200 mm, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Travel X-axis: 1,016 mm Travel Y-axis: 508 mm Travel Z-axis: 635 mm Table size: approx. 1,200 x 400 mm EQUIPMENT - Tool changer - Chip conveyor - Swivel axis - Oil mist extraction Further details according to manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 794 kg Tool diameter: 76 mm Nsdpfewqcq Hex Ag Ioku Tool slots: 24+1 Machine dimensions: approx. 3.9 x 2.7 x 2.7 m Weight: approx. 5.7 t

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 1101742, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table length: 400 mm, table width: 900 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table dimensions: approx. 900 x 400 mm EQUIPMENT Tool changer Further information according to manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 680 kg Tool diameter: 76 mm Tool slots: 24+1 Machine dimensions: approx. 3.2 x 2.8 x 2.7 m Nkodpfx Aov Naw Neg Iju Weight: approx. 3.7 t

Condition: good (used), Year of construction: 2008, HAAS VF-5D / 40 MACHINING CENTER Njdpjvf Nw Dofx Ag Isku TRAVELS : X : 1,270 mm Y : 660 mm Z : 635 mm DISTANCE BETWEEN PLANE – TABLE AND SPINDLE NOSE : 178 – 813 mm TABLE : DIMENSIONS : 1,321 x 584 mm LOAD CAPACITY : 1,815 mm NUMBER AND SIZE X PITCH OF T-SLOTTS : 7.14 X 80 mm SPINDLE : ROTATIONAL SPEED : 8,000 RPM SPEED RANGES : 2 SPINDLE NOSE : ISO 40 HIGH PRESSURE / INTERNAL COOLANT FEEDS : RAPID SPEED : 18,000 mm / min. WORKING SPEED : 12,700 mm / min. JOG : 0 – 1,260 mm / min. TOOL MAGAZINE : 24 POSITIONS POWER : 15 KW WEIGHT : KG. 7,000 YEAR OF FIRST INSTALLATION : 2008

Condition: used, Year of construction: 2001, functionality: fully functional, HAAS CNC Rotary Table (Rotary Axis) HRT160B - Worktable diameter: 160 mm Nodsymx Iljpfx Ag Isku - Year: 2001 - Includes tailstock HTS5 - Includes counter bearing with Ø40 mm mount - Includes Kitagawa 3-jaw chuck Ø190 mm - Includes chuck key

Condition: used, Year of construction: 2022, x-travel 508 mm y-travel 508 mm z-travel 508 mm weight of the machine ca. 3650 kg Njdpfsylz Dgsx Ag Ioku

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105842, SPECIFICATION Table size 914mm x 356mm Maximum table load 1361Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 +1 tools Tool to tool time 2.8 seconds Approximate weight 3500Kg Nodpfx Agsykqtzs Ieku MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (Removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table load: 1,588 kg, overall weight: 6,623 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3s HAAS VF-5/40 vertical machining centre was manufactured in 2023. It features an impressive X-Axis travel of 1270 mm, Y-Axis travel of 660 mm, and Z-Axis travel of 635 mm, making it suitable for various machining tasks. With a spindle speed of 8100 rpm and a tool changer capacity of 20/24+1 stations, consider the opportunity to buy this HAAS VF5/40 vertical machining centre. Contact us for further details. • Table size: 1321 x 584 mm Nkedpfx Aoyhcktjg Iou • Drive system: Inline direct-drive • Tool changer capacity: 20/24+1 stations • Rapid traverse (X/Y/Z): 18 m/min • Max cutting feed: 12.7 m/min Technical Specification Taper Size BT 40

Year of construction: 2010, condition: ready for operation (used), Travel X/Y/Z: 1016mm/508mm/635mm, speed: 10000rpm, table dimensions X/Y: 1219mm/457mm, max. table load: 1550kg, tool positions: 20, rapid traverse X/Y/Z: 25m/min/25m/min/25m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2600mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible. Nsdju T Rgqepfx Ag Isku

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: na, total height: 2,770 mm, table load: 794 kg, overall weight: 6,260 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 224,000 W, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS VF4SS vertical machining center was manufactured in 2019. It features a spindle with a maximum speed of 12,000 rpm and a power of 22.4 kW. The machine offers a travel range of X=1270 mm, Y=508 mm, Z=635 mm, and a rapid feedrate of 35.6 m/min on all axes. The table can support up to 794 kg. Consider the opportunity to buy this HAAS VF4SS vertical machining center. Contact us for more information. Additional equipment • Technical manuals and documentation • Chip conveyor • Optional tools included • Loading at our facility available Machine Benefits Technical Machine Benefits • Max torque: 122 nm @ 2000 rpm • Liquid cooled – air/oil lubrication • Size: 1321 x 495 mm • Type: smtc – 30+1 tool positions • Tool change time: 1. 8 s • Rapid: 35. 6 m/min on all axes • Max thrust z-axis: 17459 n • Voltage: 220/440 v – 3 Nkedpfxeyalkyj Ag Isu • Phase max current draw: 70 a (at 220 v) Extra Information Machine still under power Dimensions Machine Depth 3870 mm

Condition: used, Year of construction: 2016, x-travel 1270 mm Nkodpfx Ajyfw Dcjg Iju y-travel 508 mm z-travel 635 mm control Haas

Year of construction: 2004, condition: excellent (used), Drive power: 250 kW Rotor length: 1600 mm Rotor diameter: 1200 mm Infeed opening: 1500 x 750 mm / 1500 x 600 mm Wear parts new, main motor newly mounted. Nodpfx Aouqyr Eeg Ioku Subframe, hydraulic unit, Including control cabinet and operator panel, Excellent condition, ready for operation Total weight approx. 18 t

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Nkjdpfjv N Di Ajx Ag Ieu Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand HAAS Model Sigma 5 Main Drive Number of axis 2 Nodpfxox H Uz Ns Ag Isku This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information. Application Types Other Machine Tools

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105876, SPECIFICATION Table size 914mm x 356mm Maximum table load 1316Kg X axis traverse 762mm Y axis traverse 406mm Nedpex Sq Sbsfx Ag Ioku Z axis traverse 508mm Spindle BT40 Spindle speeds 0 -8,100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 + 1 tools Tool to toll time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual Feed cutting time 11,436 hours

Condition: used, Year of construction: 2012, x-travel 2134 mm y-travel 1016 mm z-travel 762 mm CNC-control HAAS CNC Table dimensions 2134 x 914 mm max. table load 1814 kg spindle taper SK 50 spindle turning speed range 7500 U/min spindle motor 22,4 kW feed range 1270 mm/min rapid traverse 15,2 m/min tool change unit 30 Pos. coolant IKZ voltage 400 V weight of the machine ca. 13,2 t dimensions of the machine ca. 4,70 x 2,95 x 2,99 m - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) Nedpfxox E Dn Ns Ag Ijku PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand HAAS Main Drive Tool taper SK 50 Number of axis 4 Movement X-Axis Movement 1626 mm X-Axis Rapid Traverse 15.2 m/min each Y-Axis Movement 1270 mm Y-Axis Rapid Traverse 15.2 m/min each Z-Axis Movement 814 mm Z-Axis Rapid Traverse 15.2 m/min each Workpiece Workpiece weight 4536 kg Media Chip conveyor Yes Njdpfxjx D Eppj Ag Ijku Additional Equipment Coolant tank with low and high pressure pumps 2 chip conveyors with screw This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information. Application Types Milling

Condition: refurbished (used), Year of construction: 1991, HAAS drum chipper type HTH-160x510 L2WV completely refurbished / reconditioned with new bearings (spherical roller bearings) and tested rotor New knives and counter knives Feed width/height: 510 x 160 mm Rotor diameter: 500 mm Screen perforation: 60 x 60 mm Nedpfew H Eqzsx Ag Isku Drive power: 45.0 kW Feed motors: 2 x 2.2 kW Weight: approx. 3,000 kg Machine colour: RAL 6011 Reseda green Without electrical installation incl. control cabinet with all installations relating to the system in accordance with CE standard. Operation on the cabinet door, without cable 1 unit Vibrating conveyor type HVSR 500x8000 completely refurbished / reconditioned with new bearings (spherical roller bearings) and tested oscillating elements Chute width: approx. 500 mm Chute length: approx. 8,000 mm Chute height: approx. 170 mm Wall thickness: approx. 5 mm Feed height feed: approx. 450 mm Total height feed: approx. 770 mm Discharge height discharge: approx. 950 mm Total height discharge: approx. 1,120 mm Drive power: approx. 4.0 kW Weight: approx. 1,400 kg Machine colour: RAL 6011 Reseda green Rising vibrating chute (approx. 4.5 °) incl. screening zone 15 x 15 mm, L = 500 mm incl. metal-free zone made of wood, new (L = 1,500 mm) incl. metal detector, second-hand without electrical installation 1 unit HAAS scraper chain conveyor type HKF-490x11,000 completely refurbished / reconditioned with new bearings, tested conveyor chain and flights Width: approx. 500 mm (600 mm) Length: approx. 11,000 mm Trough height: approx. 570 mm With bottom curve: 45° Total height: approx. 6,700 mm Drive power: approx. 5.5 kW without electrical installation

Condition: ready for operation (used), Year of construction: 2018, 3-axis machining center Brand: HAAS Type: VF3 Nksdpevlk R Ejfx Ag Ieu Year: 2018 CN: HAAS Equipped with: 30+1 position tool changer Chip evacuation screw 20 bar center coolant 10,000 rpm spindle Specifications: Table surface 1219 x 457 mm X-axis travel 1016 mm Y-axis travel 508 mm Z-axis travel 635 mm Max. load. on table 1588 kg Spindle speed 1 - 10,000 rpm Spindle power 22.4 KW Spindle taper ISO 40 Rapid feed 25 m/min Machine dimensions approx. 2997 x 2794 x H 3048 mm Weight approx. 5600 kg

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, SPECIFICATION Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar Nodpfx Agewx I N Ds Ijku MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger

Condition: good (used), Year of construction: 2014, HAAS VF1 (2014) • Manufacturer: HAAS • Model: VF-1 • Year of Manufacture: 2014 • Machine Type: Vertical Machining Center Technical Data: • Travel (X / Y / Z): 508 x 406 x 508 mm (20” x 16” x 20”) • Table Size: 660 x 356 mm (26” x 14”) • Maximum Table Load: 1,360 kg (3,000 lbs) • Spindle Speed: Up to 8,100 RPM (optional 10,000 or 15,000 RPM) • Spindle Taper: 40 Taper • Spindle Power: 22.4 kW (30 HP) Vector Drive Nkjdpfx Asv Iywmsg Iju • Tool Changer Capacity: 20+1 (Carousel Type) • Rapid Traverse Rates: 25.4 m/min (1,000 in/min) • Cutting Feed Rate: 12.7 m/min (500 in/min) • Automatic Tool Changer: Yes • Coolant System: Standard Flood Coolant System • Control System: Haas CNC Control • Machine Weight: Approx. 3,630 kg (8,000 lbs)

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2052582, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Haas, controller model: Haas, table width: 914 mm, table length: 1,626 mm, table load: 4,536 kg, rotary table diameter: 760 mm, rotational speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, rotational speed infinitely variable, Condition: very good (used) 4-axis horizontal machining center Brand: Haas Equipment: Tool holder SK50 Tool positions: 30+1 Nodpfx Asw Uz Aneg Ioku Year of manufacture: 03/2008 Weight: 13,600 kg Additional information: Machine has been newly painted Price on request

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 2400 rpm Spindle motor power 40 hp Number of axis 2 Nedpfx Agex D I Ubo Ioku Tail Stock Pinol tool taper MT5 Media Chip conveyor Yes Additional Equipment Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Belt-Type Chip Conveyor This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Application Types Turning