Used Hardness Tester for sale (1,932)

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. Dsdjzgr Iqepfx Apwewa DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: reconditioned (used), Motor 5 kW electric height adjustment with digital display brake can be released electrically for knife change Dodpfx Ajy Hkzfopwswa planer cutter shaft 520 mm manual feed speed 5-8-12-18 m/min start and stop buttons at front and rear planer table length 2250 x 540 mm manually adjustable fence with angle function sliding planer shaft guard

Condition: ready for operation (used), Schleich GLP2-ce combination tester SN:8423 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Djdpfx Ajrv T Saopwjwa

Condition: used, USON Qualitek 620 Leak Tester Leak Tester Condition: Used functional Djdpfx Ajy Sum Nopwowa

Year of construction: 2016, condition: used, KK PULLTESTER KKP03A / series 6 The KK pulltester is a measuring device for quality assurance in the graphic industry. It measures, with extremely high precision the bonding-adhesion of individual pages of cataloges, paperback books, journals, brochures and books. The number of pages to be measured, page numbers, order number and book block length are programmed before the measurements are taken. Technical specifications: Language: english book block format width: approx. 5 - 35 cm Dsdjwcd Iqepfx Apwowa book block format length: approx. 7 - 40 cm book block format thickness: approx. 7 cm

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Dsdpsvwgc Uofx Apwewa

Condition: new, Year of construction: 2026, machine/vehicle number: M-Y 270, functionality: fully functional, operating hours: 818 h, power: 380 kW (516.66 HP), cutting height (max.): 270 mm, cutting width (max.): 270 mm, total height: 900 mm, total length: 1,650 mm, total width: 810 mm, overall weight: 550 kg, table height: 1,500 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Çeyrek yüzyılı aşkın deneyimle, testere endüstrisinde kalite, dayanıklılık ve güvenilirliğin simgesi haline geldik. 25 yıllık uygulamalı uzmanlık ve derin sektör bilgisiyle desteklenen bir şekilde, sadece ürünler sunmakla kalmıyoruz — müşterilerimize uzun ömürlü çözümler sunuyoruz. Her bir ürünümüz yüksek performans, hassas kesim ve maksimum verimlilik için tasarlanmıştır. En zorlu koşullarda bile, testere çözümlerimiz kalitesini koruyor ve profesyonellerin ilk tercihi haline geliyor. Gelişen teknolojilere uyum sağlayarak, üretim standartlarımızdan asla ödün vermeden kendimizi sürekli geliştiriyoruz. Çünkü güçlü sonuçların doğru araçlarla başladığına inanıyoruz. Djdpfx Aey Akggspwjwa Gücümüz deneyimden, keskinliğimiz ise zanaatımıza olan tutkumuzdan gelir.

Year of construction: 2019, operating hours: 50 h, condition: excellent (used), functionality: fully functional, workpiece length (max.): 40 mm, No minimum price – guaranteed sale to the highest bidder! Unit with only 50 operating hours! The new price was €280,000! Currently, the unit is only partially operational, as it is not currently connected to the cooling system. TECHNICAL DETAILS Component types: Screws and bolts M8 and M10 Process: Automatic inductive hardening Throughput: approx. 70–80 parts/min Processable screw length: 25 - 40 mm MACHINE DETAILS Automation and feeding Feeding: Hopper conveyor Conveying technology: Inclined conveyor Sorting: Linear sorter Singulation: Automatic Indexing table: 8-position Nests per station: 2 Quenching medium: Water Quenching water tank: Present Dwedpfxozmwcae Apwoa Discharge: Magnetic discharge conveyor Demagnetization: Present Quenching medium filtration: Cartridge filter Cooling: Prepared for connection to a central cooling system RF generator manufacturer: IDEA Heating power: 50 kW Power: 67.98 hp EQUIPMENT Hopper conveyor Inclined conveyor Linear sorter 8-position indexing table with 2 nests per station IDEA RF generator Quenching water tank Magnetic discharge conveyor Demagnetization unit Cartridge filter Temperature monitoring Component height monitoring Component type monitoring Rotation monitoring Energy monitoring Ground fault monitoring Inductor flow monitoring Inductor water temperature monitoring

Condition: used, Year of construction: 2009, Curing Furnace Model: Electric Manufacturer: Reinhardt Type: E2 Year of construction: 2009 Working temperature: 50-300 degrees Working space: 0.21m3 Opening size: 650x650mm Dwsdpfx Ajzry Ipepwja Voltage: 3x400V Motor: 0.55kW. - Year: 2009 - Documentation available: No - CE certificate present: No - Power [kW]: 0.6 - Chamber length [mm]: 650 - Chamber width [mm]: 650 - Max. temperature [°C]: 300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, Hardinge GS200 CNC Lathe 2010 Hardinge GS200 CNC slant bed lathe equipped with Fanuc Series Oi-TD control. ----- Control Fanuc Series Oi-TD CNC Control ----- Capacity Chuck Size: 3 Jaw Bar Capacity: 52mm Maximum Swing: 457mm Dwsdpfx Ajylchtepwja Maximum Cutting Diameter: 284mm Maximum Cutting Length: 406mm Distance Between Centres: Not specified ----- Main Spindle Maximum Spindle Speed: 5,000 RPM ----- Turret Number of Stations: 12 ----- Axis Travels X Axis Travel: 218mm Z Axis Travel: 406mm ----- Accessories Hydrafeed Multifeed 65 Barfeed Swarf Conveyor Control: Fanuc Spec: Spindle bore 52 mm | Max Swing 457 mm | Travel X 218 Z 406 mm Accessories: Tailstock, parts catcher & 8" Power Chuck, Swarf conveyor, Collet chuck

Condition: good (used), Samed Innovazioni MM 1 Corner cutter for hardcovers Produced in Italy, Samed Innovazioni Rebord. Very good condition. This is a professional, production device for cutting corners for hardcover. Dwjdpfxeztn Tio Apwsa Year of production 2014. Solid construction ensures precision of operation. Interchangeable knives. Adjustable cutting depth. One set of knives included.

Condition: excellent (used), max. temperature 1200 Grad size of opening 220 x 120 mm Dwsdjxcbldspfx Apwea depth of chamber 400 mm dimensions of the machine ca. 1,4 x 1,2 x 1,6 m

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, In-stock item, immediately available -Tmax 1350°C -Usable internal dimensions (L x W x H) (mm): 600 x 500 x 500 -Batch weight: 300 kg -External dimensions (L x W x H) (mm): 4200 x 2500 x 3500 -Space requirement (L x W x H) (mm): 5000 x 5000 x 4000 -Weight (net): 13000 kg -Total connected load: 125 kVA -Connection voltage: 400 V -Current protection: 250 A -Control system: Stange SE 607 -Documentation Dodpfxezr U Ane Apwjwa You can find the description as a PDF in the advertisement! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Industrial furnace, vacuum furnace, vacuum furnaces, vacuum hardening furnace, hardening furnaces, sintering furnace, sintering furnaces

Year of construction: 2020, condition: new, Professional earth auger, Ø 400 x 1000 mm, with Hardox cutting edge. Robust earth auger for our carrier unit, or upon request, also for other mounting systems. Djdpfxjdf R Rqe Apwjwa Item No.: MT18-EB-400-1000

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, spindle speed (max.): 5,500 rpm, number of slots in tool magazine: 240, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis Burkhardt-Weber MCX750 M2 was manufactured in 2011. It features a substantial X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 240 positions. The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Contact us for further details. • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 Djdpfx Aozl S Uhjpwewa • Number of revolvers/magazines: 1 • Magazine capacity: 240 positions • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Rated voltage 3x 400 V • Frequency 50 1/s • Full load current 150 A • Rated current main drive 85 A • Connected load 80 kW 100 kVA • Operating voltage 400 V • Control voltage 24 DC • Frequency 50 Hz • Power 2.9 kW • Current 11.0 A • Refrigerant R134a • Filling quantity 3.0 kg Additional equipment • OPTIONAL: Tooling package (approx.): • Group 1: 700–750 tools (Ø up to 124.9 mm) • Group 2: 100–150 tools (Ø 125–224.9 mm) • Group 3: 50 tools (Ø 225–350 mm)Geometry readjusted (done by official Burkhardt-Weber)The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2006, operating hours: 27,713 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 50,000 W, number of slots in tool magazine: 144, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis Burkhardt-Weber MCX750 M1 was manufactured in 2006. It features an impressive X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 144 positions. The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Contact us for further details. Dwedpszl S T Defx Apwoa • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Number of revolvers/magazines: 1 • Magazine capacity: 144 positions • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Operating hours: 27713 h Additional equipment • OPTIONAL: Tooling package • Group 1: approx. 700–750 tools (Ø up to 124.9 mm) • Group 2: approx. 100–150 tools (Ø 125–224.9 mm) • Group 3: approx. 50 tools (Ø 225–350 mm)Recent replacement of the X-spindle and the rotary seal on the IKZ (internal cooling through spindle)Geometry readjusted(done by official Burkhardt-Weber)The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Technical Specification Taper Size SK 50

Condition: new, Year of construction: 2021, functionality: fully functional, Ladies and Gentlemen, Brand new Erhardt+Leimer web edge control systems are for sale, which have been installed but have not been used to this day. Dedpfxji Hl Hhj Apwjwa Ultrasonic edge sensor POE FX 46: Compact ultrasonic edge sensor with digital evaluation Measuring range ±3 mm Insensitive to contamination by dust Scanning soundproof materials such as paper, plastic and metal foils regardless of material transparency Internal temperature compensation for stable operating point Bar display to show the current edge position or diagnostic information PoE interface to the data network center _____ FR 6011 broadband sensor infrared: digital, measuring range +/- 79mm, clear width 40mm, with cable 3000mm long with cable gland M16x1.5 and JST female connector 00367440 More details on request. Current delivery time according to E+L: approx. 10-12 weeks after receipt of order or payment in advance _____ Web guides/web edge control as shown, including monitor Production date is mid/end of 2021 (see type plates). 7x DRB14 rotating frame system EL.NET for controlling a running web, with digital position controller with touch display. Including connection cable. Sensor type: FR 6011 IR broadband sensor Nominal width: 250 mm Roller diameter: 60 mm web tension max.: 300 N Correction path max.: 42 mm If you need more precise data, please ask us or give us a call.

Condition: used, Carrying capacity: 4.000 kg Dimensions (LxBxH): 425 x 200 x 110 cm Dwodpfszp U Sdox Apwoa

Condition: used, Manufacturer: DEMAK Housing size: 6600 x 2100 mm Dsdpfevgy Ivsx Apwewa Maximum temperature: 200 °C In the past, the oven was part of a plant and the product was transported via a conveyor belt, The oven was previously controlled by PLC, it was dismantled,

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale is a sintering and hardening furnace from Arnold-Schröder in very good, like-new condition, as can be seen in the pictures. Dwsdpfxjzpzmnj Apwsa Technical data: • Manufacturer: Arnold Schröder Industrieöfen • Model: ASM-20 • For temperatures up to 1300°C • Internal dimensions: approx. 250 x 350 x 200 mm (W x D x H) • Usable volume: approx. 18 liters • Power: approx. 6 kW • With Bentrup TC5050 control system • Year of manufacture: approx. 2015 • Condition: Like new, fully functional The furnace can be inspected and tested at any time! Shipping costs via freight carrier: approx. €150 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Errors and omissions in technical data and prior sale reserved.

Year of construction: 1999, condition: used, frequency 230 Hz workpiece length 150 mm work piece width 150 mm temperature max. ° muffle size (length) muffle size (width) muffle size (depth) mm total power requirement 210 kW weight of the machine ca. 5 t dimensions of the machine ca. m Dwsdpfx Apot Hw Ddowoa

Condition: good (used), Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits Dwsdpfx Apob A Hd Hjwea -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Condition: as good as new (ex-display), We offer you high-quality roll-off containers with mutually angled outer walls. Volume up to 40 cubic meters. Designed for the most demanding applications, manufactured from HB450 HARDOX®. Equipped with a folding net system for quick load securing. ❌1 unit immediately available from stock - in RAL 7016❌ ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We only use "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to check the "authenticity" of our products!!!! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Heavy-duty design for use in the scrap and demolition industries. Dimensions: 6500 x 2300 x 2400 mm 7000 x 2300 x 2400 mm Other sizes available upon request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Crossbar: INP 180 Mounting bracket Ø 60 mm, hook height 1,570 mm -semi-automatic folding net system -bottom made of 5mm HARDOX® HB450 -side walls 3mm HARDOX® HB450 -end profile made of 5mm Strenx® 700 special edge profile -rear crossbar made of 5mm Strenx® 700 special edge profile -center crossbar made of 3mm Strenx® 700 special edge profile -door latch model Holland + safety latch -lateral central locking -all-round tarpaulin and net hooks -ladder on the front end, galvanized -primed once inside, double coated outside -double-coated in a single color outside, according to desired RAL Optionally available on request: -crossbar INP 220 -roll tarp -steel cover with winch / hydraulics -ladder on the rear door -additional crossbars / belly band -French flap -swing flap -grain slide What distinguishes us from others? -Robot-welded component groups -all weld seams continuously on the crossbars -all containers are bead-blasted -double primed -double coated -all containers have nameplates and valid UVV testing. Djdpfx Apozpfx Iowjwa Visit us on our website!

Condition: used, Mitre Saw REINHARDT RKP 160 S - used - Two-hand operation ----- Technical Specifications ----- Max. cutting height: 210 mm, Max. saw blade diameter: 600 mm, Infeed roller conveyor length: 3,500 mm, Outfeed roller conveyor length: 2,500 mm, Motor: 5.5 kW Dodpfx Apoy Egxkowewa

Condition: used, Year of construction: 2016, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Dwjdpfxeya H Uyj Apwoa