Used Heating Coil Water for sale (20,922)

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: Gsdpoz Smqdjfx Abhokd - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, empty load weight: 135 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 150 °C, NILFISK ALTO NEPTUNE 4-50 FA HOT WATER PRESSURE WASHER NEW HEATING COIL The unit comes with new accessories, including an R+M (German brand) spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of up to 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 80–150 Connected load [kW]: 6 Gsdpfsz Ayd Ssx Abhskd Detergent tank [l]: 10 Hose length [m]: 10 Weight [kg]: 136 EQUIPMENT: NEW heating coil NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct dispensing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service

Condition: used, Rittal TopTherm Air/Water Heat Exchanger SK 3209500 Rittal air/water heat exchanger for switchgear cabinet climate control. Unit manufactured in 2019. A total of 3 units are available. Manufacturer: Rittal Series: TopTherm Type: SK 3209500 Device type: Air/water heat exchanger Condition: used Supply voltage: 230 V AC Frequency: 50/60 Hz Godpfx Aszdafgobhekd Phases: 1~ Rated current: 0.40 A at 50 Hz Rated current: 0.48 A at 60 Hz Power consumption: 0.095 kW at 50 Hz Power consumption: 0.110 kW at 60 Hz Useful cooling capacity: 2.50 kW Cooling capacity measurement point: L35 / W10 Coolant flow rate: 400 l/h Operating temperature range: 1 °C to 70 °C Coolant: Water Maximum coolant temperature: 30 °C Operating pressure: 0.1 to 1.0 MPa Operating pressure: 14.5 to 145 psi Protection class: IP55 Weight: 23.5 kg

Condition: used, Rittal air/water heat exchanger for the climate control of control cabinets and automation technology. Manufacturer: Rittal Series: TopTherm Type: SK 3210100 Device type: Air/water heat exchanger Condition: used Supply voltage: 230 V AC Frequency: 50/60 Hz Phases: 1~ Rated current: 0.44 A at 50 Hz Rated current: 0.50 A at 60 Hz Power consumption: 0.100 kW at 50 Hz Power consumption: 0.120 kW at 60 Hz Useful cooling capacity: 4.00 kW Measuring point for cooling capacity: L35 / W10 Flow rate of cooling medium: 400 l/h Operating temperature range: 1 °C to 70 °C Cooling medium: Water Maximum cooling medium temperature: 30 °C Operating pressure: 0.1 to 1.0 MPa Operating pressure: 14.5 to 145 psi Protection class: IP55 Weight: 25.5 kg Gkedpfx Abszdafmshjd Location: Kusel

Condition: reconditioned (used), functionality: fully functional, operating pressure: 800 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, Kärcher HDS 695 S Eco Hot Water Pressure Washer New heating coil The unit comes with new accessories, including an R+M (German brand) spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 170 bar and a flow rate of 800 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique photos; you are buying the exact machine shown. Technical Data: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 800 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 85–155 Connected load [kW]: 5.9 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW heating coil NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE Gjdsz Ainmopfx Abhokd KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: used, Stainless Steel Heat Exchanger AGETHERMA Type FT-1.1-910/230/10-RS04-T10-ATWH Air-to-water, Air-to-oil Heat Exchanger Serial No. WT08-1065P-2 Year of Manufacture: 2008 Completely made of stainless steel (presumably 1.4571) Gas/air flow: 900 x 230 mm External connection flange: 1000 x 310 mm Max. permissible pressure: 10 bar Max. permissible temperature: 300 °C Volume: 27 liters Test pressure: 17.9 bar Godpfoy Dvguex Abhekd Net weight: 325 kg Manufacturer test date Flange size: Ø DN25 DIN 2635 PN 40 (2 pieces) - Tubes are stainless steel with aluminum fins for improved heat transfer Available as optional accessories (at extra cost): 3 units heat exchangers with identical technical data and 27 liter capacity (weight per unit: 325 kg) 1 unit heat exchanger with identical technical data and 17 liter capacity (weight: 200 kg) 2x 90° bends with flange connection, made of stainless steel 2x adapters from rectangular flange to round pipe Ø 210 mm, made of stainless steel Price stated per heat exchanger The pictures show all 4 heat exchangers as one unit placed on a pallet. Total weight of all parts approx. 1,400 kg Sale of all heat exchangers as a package: 4,000 EUR

Condition: new, functionality: fully functional, empty load weight: 115 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, KARCHER HG 64 HEATER TECHNICAL DATA: Model: HG 64 Manufacturer: KARCHER Catalog number: 1.030-510.0 Type: Hot water generator Country of manufacture: Germany Series: Professional Condition: NEW Power supply type (Ph/V/Hz): 1 / 230 / 50 Connected load (kW): 0.3 Inlet temperature (max): 80°C Minimum inlet volume: 400 l/h Water pumping capacity (l/h): 400-1300 Safety valve operating pressure (max): 220 bar Hot water operating temperature (max): 95°C Burner power: 64 kW Fuel oil consumption (max): 5.9 kg/h Fuel tank: 20 L Fuel type: EL heating oil or diesel Operating weight: 115 kg Gedpfx Aexykwwsbhskd Dimensions (L x W x H) (mm): 880 x 680 x 860 ADVANTAGES OF THE KARCHER HG 64: Robust and durable device - High-performance burner manufactured using "Made in Germany" technology. Proven Kärcher safety technology guarantees protection for the device and user. Increased cleaning performance thanks to the use of hot water - Shorter cleaning times and lower labor costs. More effective removal of oils, fats, and grease. Effective germ removal and protection of delicate surfaces. Exceptionally easy maintenance - Easy access to all parts requiring service and maintenance. Integrated fuel filter and removable fuel tank for cleaning. KARCHER HG 64 KIT EQUIPMENT: Karcher Classic gun – M22 thread Karcher 1050 mm spray lance 10 m hose – DN8 – 250 bar – 100°C – M22/M22 Connecting hose (high pressure washer – water heater): 3 m – DN8 – 315 bar – 60°C

Condition: used, Temperature: Ambient to 85Deg C Dimensions: W32 x H30 x D35 cm Gjdpoxx Ndaofx Abhjkd We have 2 units in stock! Good working condition. Please check out our other listings as well.

Condition: new, functionality: fully functional, empty load weight: 105 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, Technical Data: Condition: NEW Catalog Number: 1.030-500.0 Power Type (Ph/V/Hz): 1 / 230 / 50 Connected Load (kW): 0.3 Inlet Temperature (max.): 50°C Inlet Flow Rate (min.): 400 l/h Water Flow Rate (l/h): 400-1000 Safety Valve Operating Pressure (max.): 200 bar Hot Water Operating Temperature (max.): 95°C Burner Output: 43 kW Heating Oil Consumption (max.): 3.5 kg/h Fuel Tank: 20 L Fuel: Heating Oil EL or Diesel Operating Weight: 105 kg Length x Width x Height (mm): 880 x 680 x 860 Scope of Delivery: Classic Hand Spray Gun - M22 Thread Spray Lance: 1050 mm Hose: 10 m - DN8 - 250 bar - 100°C - M22/M22 Hose (connection between high-pressure cleaner and hot water generator) - 3 m - DN8 - 315 bar - 60°C Durable unit: - The robust frame provides protection during continuous and intensive use. - All parts requiring maintenance are easily accessible. Godpsxtc Rcefx Abhskd - Integrated fuel filter and the option to remove the fuel tank for cleaning.

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. Gedpfxjz Iqrns Abhjkd The machine is being sold as is.

Condition: excellent (used), functionality: fully functional, Electric water heater Godpfsvbfvhex Abhskd Maximum power - 18kW

Condition: good (used), Stainless steel tank 50700l Diameter 3m Height 7.7m Stainless steel coil inside at the bottom of the tank. AISI304 stainless steel Flat bottom with a slope of 2.5% downwards. - Stainless steel hatch 410 x 520 with outward opening - Stainless steel drain valve DN70 - Stainless steel test pipe - Liquid level gauge Gedpotr Dvaofx Abhekd 16 pieces available.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, pressure: 160 bar, empty load weight: 122 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, temperature: 85 °C, KÄRCHER HDS-E 8/16-4M 36kW HOT-WATER PRESSURE WASHER Gkedpfe Aid A Uex Abhjd NEW ELECTRIC HEATER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced high-pressure hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 160 bar and a flow rate of 760 l/h, the machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Fully electric water heating allows for operation in environments where exhaust emissions are prohibited. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Flow rate [l/h]: 760 Operating pressure [bar]: 160 Max. Heating temperature [°C]: 85 Heating element power [kW]: 36 Connected load [kW]: 41.5 Cleaning agent tank [l]: 10 + 20 Hose length [m]: 10 Weight [kg]: 122 EQUIPMENT: NEW electric heating element NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Two built-in chemical tanks allow for the dispensing of cleaning agents directly through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and easy to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal piping.

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Length: 17.10m Godpfx Asxqfwtobhskd

Condition: used, Manufacturer: UNIMAN Gedpfx Abo Adqbhehekd Load capacity: 9000 kg Travel range: 400–2050 mm

Condition: used, functionality: fully functional, For sale: an industrial Nilfisk ALTO SOLAR BOOSTER 7-58E18H high-pressure washer with electric water heating, 18 kW. This stationary unit is designed for cleaning machines, equipment, floors, and industrial fixtures. Gjdpo Aibgmefx Abhskd Technical specifications according to the nameplate: Manufacturer: Nilfisk ALTO Model: SOLAR BOOSTER 7-58E18H Product number: 107370270 Serial number: 3520122200419 Working pressure: 170 bar Maximum permissible pressure: 250 bar Flow rate: 18.5 l/min – 1110 l/h Maximum temperature (according to nameplate): 85°C Electric heating power: 18 kW Total rated power: 25.5 kW Power supply: 400 V, three-phase, 50 Hz Rated current: 39 A Protection rating: IPX5 Weight: 155 kg Country of manufacture: Hungary Equipment visible in the photos: High-pressure hose Nilfisk high-pressure gun Spray lance Pressure gauge Water temperature adjustment Control panel with START/STOP buttons and a main switch The unit has an additional marking on the housing: “MAXIMAL 70 Grad,” indicating a temperature limit of 70°C. The unit is used and shows visible signs of wear.

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 24 kW (32.63 HP), heating capacity: 24 kW (32.63 HP), temperature: 110 °C, Equipment: hot water, type plate available, We are selling a functioning Buderus heating system with a hot water storage tank, which is currently in use. The heating system must be removed by the buyer and is sold as a spare part/project item, with no warranty of any kind. The reason for this is that we are selling the building and it will be demolished next year. We are not a heating system company and can therefore only sell it as is. The asking price is based on comparable offers found online; the storage tank and expansion tank will be included free of charge. Gjdpfe Ai Sa Tex Abhekd You are welcome to inspect the system and view the maintenance records after arranging an appointment in advance.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,800 mm, total width: 2,500 mm, total length: 12,000 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 60 kWh, Equipment: documentation/manual, Containerized, two-stage high-pressure reverse osmosis system for landfill leachate, liquid waste, and saline industrial wastewater. The system is designed for a conductivity of up to 35,000 µS/cm and a COD of up to 10,000 mg/l. It is overhauled and tested with brine solution at the factory before delivery. The FAT protocol is included in the scope of supply. PERFORMANCE DATA (Design 35 mS/cm, 20 °C) - Feed: max. 8.33 m³/h or 200 m³/day - Permeate: 5.0 m³/h or 120 m³/day (60% recovery, higher with lower salt load) - Concentrate: 3.33 m³/h or 80 m³/day - Conversion to approx. 10 m³/h permeate possible (upon request) STAGE 1 (WASTEWATER STAGE) - 30 ST+-Spacer-Tube modules with open channel, fouling-tolerant - 795 m² membrane area - 2 frequency-controlled high-pressure pumps, operating pressure 60 to 70 bar, max. 75 bar STAGE 2 (PERMEATE STAGE) - 6 ST+-Modules, 159 m² membrane area Gksdpfxo Ahplto Abhod - 1 frequency-controlled high-pressure pump, max. 75 bar - Concentrate is returned to stage 1 EQUIPMENT - Automatic double multi-layer filter with backwash - Cartridge filter with differential pressure monitoring - Acid dosing for pH adjustment, antiscalant dosing station 100 l - Dosing stations for alkaline and acidic cleaner, 250 l each - Integrated chemical cleaning (CIP) - Degassing and blower station for the permeate, permeate tank for outdoor installation - Pipelines: low-pressure PVC, high-pressure stainless steel 1.4571 - PLC with panel PC, data logging and remote access - Insulated 40-ft container with separate, segregated switchgear room - Module crane, heating, lighting, ventilation, emergency shower, hand washing basin - Components: Grundfos, GEMÜ, GF Piping Systems, CAT Pumps, EMZ - Documentation (mechanics, electrical, R&I, layout) and operating manual in English APPLICATIONS Landfill leachate, liquid waste treatment, industrial wastewater with high salt and COD load, concentrate reduction before evaporators, rental and emergency applications. OPTIONAL (not included in the scope of supply) Transport, installation, commissioning, training, raw water tank and feed pump, ion exchanger or activated carbon for post-treatment. CONDITIONS Purchase or lease-purchase over up to 36 months. Warranty 6 months from commissioning on the overhauled components. Service support (remote monitoring, membrane management, spare parts) as a separate package. Binding statements on permeate quality after submission of your water analysis.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled Gkedpfx Abji Hckrohod ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Gkodpfoxbgrgjx Abhsd Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: used, IKA LR 2000 V Laboratory Reactor For sale is a professional, modular IKA LR 2000 V laboratory reactor system in ready-to-use condition. This configuration is the ideal workhorse for product development, simulation, and small-scale production (e.g., in the fields of cosmetics, pharmaceuticals, chemistry, or food technology). Thanks to its vacuum compatibility and the combination of an anchor stirrer and a high-performance disperser, the system is perfectly suited for the production of stable emulsions, creams, and lotions. Here you will receive a complete, ready-to-use system. The expensive double-walled glass vessel with bottom outlet, the heating bath with temperature sensor, and the Ultra-Turrax T25 including shaft are already included in the package. You save yourself the tedious and costly individual purchases, which would amount to thousands of euros! Scope of delivery & technical components: Reactor vessel: Double-walled 2.0-liter vessel made of high-quality borosilicate glass 3.3. The jacket allows for precise heating and cooling via external thermostats. Equipped with a practical bottom outlet valve for clean emptying. Mixing tools: Integrated anchor stirrer for optimal wall scraping with viscous masses, as well as a suitable flow breaker to prevent vortex formation and for perfect vertical mixing. Dispersing device: IKA ULTRA-TURRAX T25 including matching dispersing shaft. Enables highly effective homogenization and size reduction directly during reactor operation. Drive & control: Robust IKA control unit RE 162 P for powerful stirring even at low speeds. Temperature control: Water bath LT5 control including external temperature sensor. Gkedpfx Absz I Szwshjd The sensor measures the temperature directly inside the reactor medium, which enables highly precise control via the water bath. Accessories: Complete stand system for the secure mounting of all components as well as all necessary holders. Note: The sale is without control software. The system can be fully, independently, and easily controlled directly via the hardware controls. "Everything from one source: We will gladly offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Rotating device Gunter Seibold rotating device for HTS coils – continuously variable drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding cores. Developed for the uniform distribution of two-component resin during the curing process. Ideal for development, laboratory, or production environments with high-temperature superconductor coils. The winding form is electrically heated; the power supply is directly connected to the form (not included in the scope of delivery). The machine impresses with its precise control, ease of operation, and service-friendly design. Technical features Solid machine stand: Welded square tube construction with adjusting screws and floor anchors Drive: Gkedszil R Rjpfx Abhsd Three-phase planetary gearbox motor (11 kW, 400 V, 50 Hz, 3 phases) Continuously variable speed (0.2 – 100 min⁻¹) Soft start & soft stop via frequency inverter (4-quadrant controller) Electromagnetic spring force brake (safe stopping in case of power failure) Rotating direction can be switched left / right Control panel: 5.7" touch panel for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrical system & control cabinet: Control integrated in the machine stand 400 V / 230 V power supply, 24 V DC control voltage Circuit breaker, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air conditioning unit Complete grounding & static discharge of the main shaft Adjustable work area light (swivel and height adjustable) Feature / Value Max. coil diameter 1,500 mm Coil passage 1,700 mm Center height above floor 1,100 mm Max. load on turntable 500 kg Turntable Ø 600 mm, 4 T-slots (DIN 650) Speed range 0.2 – 100 min⁻¹ (continuously variable) Torque 775 – 539 Nm Operating voltage 400 V / 50 Hz Control voltage 24 V DC Connected power 11 kW Connected current 32 A Color scheme (according to RAL) Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / control cabinet: Light gray (RAL 7035 / 5010) Weight: approx. 1800-2000 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 1998, power: 3.3 kW (4.49 HP), Manufacturer: LAUDA Dr. R. Wobser GmbH & Co. KG Equipment: Heat transfer system Type: TR 400 HK Serial No.: M16 128 Year of manufacture: 1998 Heat transfer medium: Water Permissible temperature range: up to 140 °C Filling volume: 30 liters Voltage: 400 V / 3-phase Power: 1.5 kW Frequency: 50 Hz Protection class: IP54 Gsdpfx Ao Aiubwsbhokd If you have any questions or require additional images and information, please do not hesitate to contact us. An inspection can be arranged at any time.

Condition: used, Autotherm Type: Autotherm AW 95-12/VK/E temperature control unit Autotherm AW95-12_VK temperature control unit for water/glycol temperature control (fully overhauled) Autotherm AW temperature control unit: For highly precise temperature control of water Autotherm temperature control units are used in various areas of industry, research, and laboratory applications. Temperature control units, for example, supply tools, open baths, double-walled containers, heat exchangers, and heating chambers with temperature-controlled water to maintain them at the desired temperature with high precision. Application areas: Mechanical engineering, for example, in the solar and wind power industry, textile industry Plastics processing Chemical and pharmaceutical industries Paper manufacturing Medical technology Food industry Research Godpfx Aezhkb Ejbhjkd Autotherm AKW AW95-12/VK temperature control unit Temperature range: RT°C / +95°C Heating capacity: 12.0 kW Cooling capacity: 18.0 kW Passive cooling system via heat exchanger / connection to a cooling water network required Rated power: 14.5 kW Dimensions: 600 mm x 840 mm x 910 mm Power consumption: 400 volts / 50 Hz 13400 watts, 19.6 A, 5.1 bar Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2008, operating hours: 2,467 h, machine/vehicle number: LC690, Used AMER filling line for still water PET, 5000 BPH, 2 blowersTechnical Specifications & Performance DataThis used bottling line is configured for still water in PET bottles and combines bottle production, conveying, rinsing, filling, capping, labeling and secondary packaging. The line includes two SMF COMBI 400 automatic PET bottle blow molding machines, an AMER rinsing-filling-capping monoblock, a SACMI LABELLING OPERA 200 RF labeling machine and an AMER shrink wrapper.Filling capacity: 4,000–5,000 bph for bottles with 30/25 mm necks.Blowing capacity: up to 4,000 bph on 1.5L bottles through two SMF COMBI 400 blowers.Labeling capacity: 12,000 bph.Shrink-wrapping capacity: 300 packs/h.Bottle range: 0.25L to 2.5L for the blow molding section.Available mold formats: 0.33L, 0.6L, 1.5L and 5.0L, depending on the machine section.Filling monoblock configuration: 16/18/6.Required installed power: 120 kW.Required hall surface: approximately 500 m².Advanced Automation & Control SystemsThe PET bottle blow molding section uses infrared preform heating with 8 segments, 14 lamps and 550 mm heating elements. The SMF COMBI 400 machines operate with a 400 V, 3-phase, 50 Hz supply and have an installed power of 56 kW per machine. The labeling machine operates at 400 V, 50 Hz and is rated at 28 kW and 47 A.The AMER filling monoblock integrates rinsing, filling and capping in a compact process block. It is equipped with a HEPA filter and an integrated CIP aggregate with disinfection, supporting hygienic beverage production and efficient internal cleaning procedures.Production Line Integration CapabilitiesThis complete bottling line is designed as an integrated PET packaging solution for still water production. Preforms are handled by the SMF hopper and supplied to the blow molding machines, while air conveying transfers formed PET bottles toward the filling section. After rinsing, filling and capping, bottles are labeled with OPP foil and transferred to the shrink wrapper for pack formation.Machine typeManufacturer / modelYearBlow Molding MachineSMF Maschinenfabrik GmbH / COMBI 4002009ChillerSMF Maschinenfabrik GmbH / HT-6A2008Filling MonoblockAMER / BLOCK2008Labeling MachineSACMI LABELLING / OPERA 200 RF2008Shrink Wrapper Godpfx As Adtttsbhskd