Used Hebrock Akv 2001 Dk for sale (43)

Condition: not inspected (used), Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Feed rate max.: 10 m/min Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Number of processing units: 5 Number of panel splitting/milling units: 1 Number of edge processing units: 4 Gluing system: EVA hot melt adhesive The machine consists of the following processing units: Kledpfxezf Id Se Anyeu Panel splitting/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Trimming Number of motors: 1 Edge processing unit 2 Processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Pressure roller Pressure with idler rollers Panel support guides Edge roller magazine Glue pot for EVA hot melt adhesive Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8570

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Klsdpfx Asx S Hmzonysu Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: used, Year of construction: 2000, total height: 1,600 mm, total length: 4,300 mm, total width: 840 mm, Colour: Grey - Year: 2000 - Documentation available: No - CE certificate present: No - Serial number: 404 - Number of units [pcs]: 6 Kodpeykafaefx Anyolu - └ 1st unit type: Glue unit - - Tools available: Yes - └ 2nd unit type: Pressure rollers - └ 3rd unit type: Cap unit - - Tools available: Yes - └ 4th unit type: Corner rounding unit - - Tools available: Yes - └ 5th unit type: Radius scraping unit - - Tools available: Yes - └ 6th unit type: Brushing unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 15.8 - Power [kW]: 10.2 - Transport dimensions: 4300mm x 840mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Kjdpjxyiilsfx Anyslu

Condition: used, Year of construction: 2012, total height: 1,600 mm, total length: 5,250 mm, total width: 1,440 mm, Edgebander HEBROCK AKV 3006 DK FS maximum edge thickness 3/8 mm min/max. workpiece thickness 10/40 mm min. workpiece length approximately 200 mm min. workpiece width approx. 80 mm feed speed about 10 m/Min. ready in about 6 minutes. maximum power consumption 12 kW electrical connection 400 V / 3 Ph / 50 Hz Pre-mill Glue unit Pressure roller Klodpfxswnhb Sj Anysu Chopping saw Milling unit Milling unit Corner rounder Radius scraper Flat scraper Cleaning unit Dimensions (length x width x height) 5250x1445x1600 mm, weight 1550kg - Year: 2012 - Documentation available: No - CE certificate present: No - Transport dimensions: 5250mm x 1445mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2007, machine/vehicle number: 1386, functionality: fully functional, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, year of last overhaul: 2025, Hebrock Edge Banding Machine AKV 3003 DK F Edge banding machine with hot melt adhesive application to the workpiece for edge material up to 8 mm and joint trimming including DIA tools - ergonomically positioned control panel - easy adjustment options from the operator’s side (digital displays) - maintenance-free quick heat-up glue pot - robust chain drive - high-frequency crosscut saw (300 Hz) - high-frequency flush milling station incl. tool fitting and fine adjustment from the operator’s side - automatic edge feed - safety and noise protection hood - extendable workpiece support Klodpfx Asyud Sfonyeu - electronic temperature controller - pneumatic end trimming for up to 3 mm edge thickness and 60 mm edge height - double roller upper pressure - signal lamp for workpiece tracking - aggregate viewing window from operator and rear side - CE-compliant safety standard complete with: - surface scraping unit - corner rounding cutter - 8 mm edge thickness Workpiece height approx. 10 - 40 mm, Feed rate approx. 10 m/min, Power consumption 11 kW (31 A) 400 Volt, 50 Hz, Length approx. 4300 mm Weight approx. 1250 kg Sold in current condition as inspected, ex location Seevetal, excluding freight and packaging, sale subject to prior sale.

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min. Power consumption approx. 11 kW With heated infeed fence With quick-heating glue pot Pneumatic roller end trimming up to 3 mm With cross-cut saw for edge thicknesses up to 5 mm Milling station optionally equipped with combination indexable insert cutters for radius, straight, and chamfer milling Outrigger, foldable and extendable to the front With undercarriage With integrated extraction system Dimensions (L x W x H): 3600 x 1400 x 1200 mm Weight approx. 670 kg Kjdpfx Anowka Tlsyjlu Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Max. workpiece height approx. 40 mm Ksdpfox Rr Dvox Anyjlu Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min Power consumption approx. 11 kW With quick-heating glue reservoir Pneumatic edge trimming up to 3 mm With cross-cut saw for edge thickness up to 5 mm With milling station, optionally equipped with combined reversible blade cutters for radius, straight and chamfer milling Outrigger, foldable and extendable to the front With chassis L x W x H: 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Specification: 3 mm Kedsw Nih Ispfx Anyslu 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: excellent (used), Catalogue number: 7983 Klsdpfxsy Id Nlo Anysu TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: AKV 88 D Machine no: 569-P3 Year model: 2005 Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Machine size (lxwxh): 1360x690x1220mm Weight: approx. 150Kg Kledeq Ihxpopfx Anyou Stock no: 2001921BXA

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Kedeu Racxepfx Anyjlu Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Condition: used, Year of construction: 1994, for pre-coated edges Kljdevwfzvepfx Anysu including a lot of edge material with outriggers on both sides end cap station 3-roller feed used, good condition Make Hebrock Type AKV-83 Year of construction 1994 Edge band thickness 1.0 mm Workpiece height max. 50 mm Workpiece width min. 50 mm Workpiece length min. 170 mm Space requirement approx. 1700 mm x 690 mm x 500 mm Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Condition: good (used), Year of construction: 2002, I sell the edge banding machine HEBROCK AKV088D, Year 2002. Suitable for curved shaped edges Kodpovx D Auefx Anyolu Good condition, possible to test ! Possible to buy also the Radius milling machine HFF08.

Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support Kedpfxszb Idfs Anyslu ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.

Condition: not inspected (used), Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! Klodozf Ircepfx Anyju TECHNICAL DETAILS Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Edge processing unit: Capping Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with descriptive content. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8571

Condition: used, Year of construction: 2013, Gluing, edge trimming, combination milling, flat pull blade, max. edge thickness: 3/8 mm, max. workpiece height: approx. 40/50 mm, min. workpiece length: approx. 250/300 mm, min. workpiece width: approx. 70 mm, feed rate: approx. 10 m/min, ready for operation: approx. 6 min, power consumption: 6.5 kW, drive system, working height: 880 mm, dimensions: 3600 x 1300 x 1500 mm, weight: approx. 660 kg. Kledpfx Anozcw Amoyou Storage location: Supplier.

Condition: excellent (used), Year of construction: 2000, Technical data: • Manufacturer: Hebrock GmbH (Made in Germany) • Type: EURO 2000 • Year of manufacture: 2000 • Voltage: 230 / 400 V Kljdpozbyvajfx Anyju • Frequency: 50 Hz • Power: 7 kW • Current consumption: 13.6 A Working range: • Workpiece thickness: approx. 10 – 50 mm • Edge thickness: approx. 0.5 – 3 mm • Minimum workpiece length: approx. 250 mm • Minimum workpiece width: approx. 70 mm • Feed rate: approx. 10 m/min • Compressed air connection required (approx. 6–7 bar) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius trimming blade, corner milling cutter, surface trimming blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius trimming blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation incl. glue outlet device, HF miter saw station (approx. 12000 rpm), HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and replaceable blade milling cutter (combination version), corner rounding cutter, radius trimming blade, surface trimming blade (incl. pneumatic lift), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 quick-change preparation for corner milling cutter F5/08/5 additional replacement motor for corner milling cutter with tool set F5/09/4 multi-radius trimming blade (R1/R2) F5/24/1 spray device for release agent F5/24/2 spray device for cleaning agent F5/25 spray device for edge F5/27 nesting for milling cutter and radius trimming blade Kljdslht Hwjpfx Anysu F5/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: Available from stock in 54634 Bitburg - available in week 4 -

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Kledpfslht Hzjx Anyju Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment Kledpfxei Am U Ds Anyou (radius, chamfer, flush trimming)

Condition: new, Year of construction: 2025, Hebrock F 4 For the complete processing of your panels For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce completely finished edges on a machine length of only 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted rapid heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change unit preparation, including glue change device for PUR processing Surface scraping blade with dual contact Pneumatic roller capping (scissors-type design, Hebrock system) Double roller pressure (ball-bearing mounted) Transport chain with permanently screwed-on special chain plates Kedpfxshqadce Anyjlu Edge router Routing unit Miter saw Corner router Accessories: F4/09 Radius scraping blade (incl. pneumatic lift) F4/09/4 Multi radius scraping blade (R1/R2) F4/30 Pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - available on short notice -

Condition: new, Year of construction: 2025, The Hebrock K 36 Top model with motorized adjustment - showroom model - new machine - - immediately available - This popular Hebrock model offers unparalleled possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By providing the option to equip the machine with a stepped milling cutter and a multi-radius draw knife, Hebrock sets new standards in the field of perfect edge processing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 minutes. Klodpfxei Am Uko Anyou Max. edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed rate: approx. 15 m/min. Ready for operation: approx. 6 min. Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3-phase – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; edge trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue reservoir with replaceable reservoir preparation incl. glue outlet device, high-frequency double-motor trimming saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable milling cutter (combination version), corner rounding cutter, radius draw knife, flat draw knife (incl. pneumatic retracting device), finishing station, robust chain drive, ball-bearing double roller pressure, aggregate sight window from the rear of the machine and the operator side, signal lamp for workpiece sequence, extendable workpiece support, feed rate approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius draw knife 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25. Protective spray for edge 36/27 Nesting (1 milling station + 1 radius draw knife) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package with motorized adjustment for panel, edge thickness and rabbet milling depth Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius scraper blade, corner cutter, surface scraper blade, finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius scraper blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next Ksdpsi Anadofx Anyslu With PLC control (incl. touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue outlet device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combined version), corner rounding cutter, radius scraper blade, surface scraper blade (incl. pneumatic lift), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius scraper blade F5/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: In stock, 54634 Bitburg Available in calendar week: 4/2024

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter, both with and against feed direction - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade - Air jet nozzle at the radius scraper - Flat scraper blade - Air jet nozzle at the flat scraper - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW Kedpfxoymyp Rs Anyjlu - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation