Used Hebrock Akv 3005 Dk for sale (56)

Condition: used, Year of construction: 2007, Jointing cutter 1. Milling station R=2.5 Combination unit Corner rounding cutter R=2 Surface scraper Profile scraper Pneumatic milling adjustment (Straight / Radius) PLC control with Pro-face touchscreen Swappable tank Prepared for special feature: maximum workpiece thickness 60 mm (without jointing) Storage location: Supplier Hsdpfx Aoxnlaceftenu

Condition: used, Year of construction: 2018, Used machine GM020.0050 AKV 3005 DK - F Year of manufacture: 2018 Specification: 8 mm 1st milling station: Combination Pneumatic 3-point adjustment Cleaning station Corner rounding cutter Radius scraper station incl. lift Surface scraper PLC control incl. touchscreen Interchangeable tanks Hjdpfow Nif Hex Aftonu Nesting Glue discharge 60 mm workpiece thickness (joining and corner milling) Spraying device for panels Edge protection spraying Short workpieces

Condition: excellent (used), Hebrock AKV 3005 Edgebander Well equipped, inspection and testing possible prior to purchase Pre-milling cutters Glue application by roller, with glue drain Second glue pot included Pneumatic pre-cut guillotine Pressure rollers End trim saw for precise finish Top/bottom milling unit, R1-R2 radius pneumatically adjustable Profile scraper Hjdpswy Uhpsfx Aftonu Interchangeable corner rounding unit for 1mm and 2mm Flat scraper Polishing unit Max edge thickness from roll: 3mm Max solid strip thickness: 12mm Feed: 2 speeds Machine is well maintained and in very good condition

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Hnsdpewmf E Ssfx Aftou

Condition: used, Year of construction: 2005, Used machine GM020.0029 Year of manufacture: 2005 AKV 3005 DK-F 8 mm version 1st milling station: Combination Cleaning station Corner rounding cutter Jointing cutter Surface scraper with extraction Profile scraper Hsdpfx Afew In R Eotjnu Chassis Pneumatic milling adjustment SPS control Preparation for interchangeable tanks

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Edge banding machine Hebrock AKV3005DK-F with pre-milling, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Touchscreen interface with PLC control for simple operation of the machine; up to 12 user programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise reduction hood Extendable workpiece support, special feature extendable up to 950mm Extraction connection 80 + 140mm Units: Quick-change glue pot with glue outlet; two glue pots included in delivery (one used for EVA glue, one for PU glue), the PU glue pot is practically as new, only purchased for a single job. Pressure beam manually adjustable with SIKO counter Infeed fence manually adjustable with SIKO counter Edge thickness manually adjustable with SIKO counter Pre-milling unit with Leitz Whispercut diamond cutters, still sharp Gluing station with automatic edge feeder for coil material up to 3mm Pressure zone with 4 rollers Cross-cut saw Hodetpn Etepfx Aftonu Integrated collection container for edge trimmings Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Corner rounder R2, pneumatically adjustable between thin and thick edge The profile milling unit can also be used for shelf program, that is, it only rounds the straight edge, not the corners Radius scraper blade R2, pneumatically retractable Glue joint scraper blade, pneumatically retractable Hood lock CE marking Operating manual A video of the machine in operation can be sent upon request. All reversible knives of the milling units and scraper blades have been renewed or rotated, saws sharpened. The machine is therefore ready for immediate use. Only the diamond pre-milling cutters (Whispercut) have not been replaced, but are still sharp. Paintwork touch-ups carried out. The Hebrock AKV series is the predecessor of the current K series. The machine has only about 730 operating hours (glue pot switched on), but the frequency converters were switched on for only about 455 operating hours. The machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "further offers from this provider."

Condition: used, Year of construction: 2010, total length: 5,250 mm, total height: 1,780 mm, total width: 1,060 mm, Weight: 1.500 kg Price: On request - Year: 2010 - Documentation available: No - CE marking present: Yes - Serial number: 1969 - Transport dimensions: 5250mm x 1060mm x 1780mm (l x w x h) - Transport weight [kg]: 1500kg Hedpfxowp D Udj Aftenu - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 3658, power: 9.5 kW (12.92 HP), input current: 400 A, input frequency: 50 Hz, The machine on offer comes from a hobby workshop and is in exceptionally good condition for its age. Hodpfxoxnz E Is Aftenu

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Hsdpfx Ajxfh Tmoftjnu Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, This is a Hebrock 3006 DK-F machine that has operated a total of 68 km of edge banding. Most of the air supply hoses have been replaced. The machine comes with an additional set of pre-planing cutters, sharpened and ready for use. Model: AKV 3006 DK-F Machine No.: 1277 Voltage: 400 V Frequency: 50 Hz Current: 29.7 A Power: 12.3 kW Hedpfxsxiv R Us Aftenu Year of Manufacture: 2007 Manufacturer: Maschinenbau Hebrock GmbH, Bünde, Germany Description: The machine features: - Premilling unit - Edge trimming unit - Buffing unit - Corner rounding unit - Spraying unit for antistatic and coolant liquids - Glue application unit with quick-change glue pot - Control screen for easy parameter adjustment Condition: Excellent, fully operational and well-maintained.

Condition: excellent (used), Hebrock 3003 Edge Bander well equipped, can be tested before purchase Initial MILLING AirTronic zero joint glueless system - hot air Hjdpfswmc I Dox Aftjnu glue application with a roller, pneumatic preliminary guillotine pressure rollers anti-adhesive fluids finished cutting saw top-bottom milling unit, R1 - R2 pneumatically adjustable corner milling unit pneumatically adjustable flat scraper max element height 50mm max veneer thickness in roll 3mm feed 10m/min power consumption 15.8KW very good condition, fully fulfills its functions

Condition: used, Year of construction: 2007, Used Machine GM020.0068 AKV 3003 DK - F Hnsdew Nih Ispfx Aftju Year of manufacture: 2007 Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Year of construction: 1998, condition: ready for operation (used), A right-sided Hebrock edge banding machine is available. Workpiece thickness range: 10mm-50mm, min. workpiece width: 70mm, min. workpiece length: 250mm, edge thickness (roll material): 0.5mm-5mm, max. edge height: 55mm, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. On-site inspection is possible. Hsdew A R S Nspfx Aftsnu

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 max. workpiece height approx. 40 mm min. workpiece length approx. 250 mm min. Workpiece width approx. 70 mm Feed rate approx. 11 m/min. Ready for operation approx. 4-5 min. Power consumption approx. 11 kW with heated infeed ruler with quick-heating adhesive container Hnjdpfx Ajwka Tljftou Pneumatic roller capping up to 3 mm with cross-cut saw up to 5 mm edge thickness with routing station equipped with combined insert routers on request for radius, straight and chamfer routing Extension arm, can be folded down and extended to the front with chassis with integrated extraction system L x W x H 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: at short notice Location: Hochheim Hochheim

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Edge banding machine with jointing cutter (incl. DIA tool), with PLC control (incl. touch screen) with hot-melt glue application to the workpiece for edgebanding material up to 3 mm: maintenance-free, coated gluing bowl with exchangeable bowl preparation, HF cross-cut saw station (approx. 16,000 rpm) for front and rear edge overhang, HF trimming station (approx. 16,000 rpm) with exchangeable panel trimmer (combination version), router fine adjustment from the operator's side (Hebrock system), Corner rounding cutter (minimum workpiece length 300 mm, max. workpiece thickness 40 mm), surface scraper incl. pneumatic lifting, robust chain drive, double roller top pressure, unit viewing window from the machine rear and operator side, extendable workpiece workpiece support, feed approx. 10 m/min, 60 mm workpiece thickness, incl. 1x exchangeable basin incl. chassis Hodel H E H Hopfx Aftsnu

Condition: used, Hebrock AKV 3005 edge bander, well-equipped, can be tested before purchase, Liquids before milling units, Pre-milling cutters, Glue application with roller, equipped with glue drain, Second glue pot included, pneumatic pre-cut guillotine, pressure rollers, final trim saw, milling unit top/bottom, R1 – R2 pneumatically adjustable, profile scraper, corner rounding unit, liquids before scraper, Hnodew I Sp Sopfx Aftou flat scraper, polisher, max edge tape thickness in roll: 3mm, max edge thickness for lipping: 12mm, machine in very good condition.

Condition: used, Year of construction: 1992, Used machine Year of construction: 1992 max. workpiece height approx. 40 mm min. workpiece length approx. 250 mm min. Workpiece width approx. 70 mm Hnsdpfx Aswka Shefteu Feed rate approx. 11 m/min. Ready for operation approx. 4-5 min. Power consumption approx. 11 kW with rapid heating adhesive container Pneumatic roller capping up to 3 mm with cross-cut saw up to 5 mm edge thickness with routing station equipped with combined insert routers on request for radius, straight and chamfer routing Extension arm, can be folded down and extended to the front with chassis L x W x H 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: at short notice Location: Röllbach

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3074, feed rate Y-axis: 10 m/min, total length: 4,984 mm, workpiece height (max.): 60 mm, total width: 1,425 mm, edge thickness (max.): 3 mm, total height: 1,618 mm, overall weight: 1,400 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, extraction nozzle diameter: 140 mm, working height: 888 mm, input current: 32 A, input frequency: 50 Hz, extraction connection diameter: 140 mm, year of last overhaul: 2025, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper Hnodpfxexlr S He Afteu - Polishing wheel Price does not include VAT.

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: AKV 88 D Machine no: 569-P3 Year model: 2005 Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Machine size (lxwxh): 1360x690x1220mm Hodpfxoq Ihxps Aftsnu Weight: approx. 150Kg Stock no: 2001921BXA

Condition: ready for operation (used), functionality: fully functional, overall weight: 800 kg, working height: 870 mm, power: 11 kW (14.96 HP), workpiece width (max.): 70 mm, Technical data: max. edge thickness: 5mm / 8mm max. workpiece height: approx. 40mm / 50mm min. workpiece height: approx. 250mm / 300mm min. Workpiece width: approx. 70mm Hjdsug Uqaepfx Aftenu Feed speed: approx. 11m/min Ready for operation: approx. 4.5 min Power consumption: approx. 11kW Electrical connection: 230/400V / 50/60 Hz Work table height: 870mm Dimensions (LxWxH): 4100x1400x1300mm Condition and details see pictures

Condition: used, Year of construction: 1994, for pre-coated edges including a lot of edge material with outriggers on both sides end cap station 3-roller feed used, good condition Make Hebrock Type AKV-83 Hjdpfxovwfzvo Aftjnu Year of construction 1994 Edge band thickness 1.0 mm Workpiece height max. 50 mm Workpiece width min. 50 mm Workpiece length min. 170 mm Space requirement approx. 1700 mm x 690 mm x 500 mm Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Hodpfxju Racxs Aftonu Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 585, Brand: Hebrock Model: AKV 1000 V Machine no: 585 Year of manufacture: 1995 Tech. data: Edgeband thickness max: 3 mm Edgeband height max: 50 mm Max feed speed: 7.5 m/min With cutting knife Length of work table: 2200 mm Motor: 7 kW, 50 Hz, 230/400V, 3-phase Hsdjib H Slopfx Aftenu Size for transport: Length: 220 cm Width: 115 cm Height: 150 cm Stock no: 2001164BXM

Condition: good (used), Year of construction: 2002, I sell the edge banding machine HEBROCK AKV088D, Year 2002. Hnedpfx Afevx D Aujtju Suitable for curved shaped edges Good condition, possible to test ! Possible to buy also the Radius milling machine HFF08.

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hjdpfjlht Hwjx Aftsnu Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -