Used Helmet Profile for sale (5,865)

Condition: good (used), functionality: fully functional, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, shaft diameter: 100 mm, roller diameter: 300 mm, bending radius (max.): 500 mm, bending radius (min.): 500 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, pipe diameter (max.): 115 mm, tube wall thickness (max.): 3 mm, overall weight: 2,700 kg, total length: 150 mm, total width: 150 mm, total height: 150 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, operating pressure: 200 bar, year of last overhaul: 2026, Equipment: documentation/manual, emergency stop, hardened rollers, Profile bending machine model PP100 Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor Gsdpfx Ajywhamoihjuh -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

Year of construction: 2002, condition: ready for operation (used), X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible. Gedpfx Aijzrn I Rjhsuh

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. Gujdpfxeglaq Is Aiheh - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Gusdpfxshgiuhs Aihsh Hydraulically adjustable top roller Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: used, Field of view on the objective lens at 50x: 11.2 x 9.2 mm Field of view on the objective lens at 100x: 5.6 x 4.6 mm Projection area: 560 x 460 mm Objective table size: 230 x 165 mm Godpfx Aeb Nxl Isiheuh Diameter of the glass table: 80 mm Approximate weight: 230 kg Space requirement: 1030 x 780 x 1800 mm

Year of construction: 1998, condition: ready for operation (used), machine/vehicle number: 2131, Max. pressure: 55 kN Throat: 175 mm Adjustable punching stroke: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Notching stroke adjustable: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Godpfx Ajnacy Tjihjuh Floor space required: 1170 x 620 x 1470 mm weight: 930 kg

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Gusdpfx Asq D E Tceihoh Punches 20 mm holes in 19 mm steel Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Very good condition

Condition: used, 5-way combination profile steel shear, PEDDINGHAUS Type 210 AD/13 Machine No. 529A059, Year of manufacture approx. 1970 Punching unit: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal Overhang 365 mm Round bar shear: Cutting capacity, round 42 mm Square 38 x 38 mm Flat bar shear: Cutting capacity at shear angle 5° 150 x 13 mm Gjdpfoi Duh Ijx Aihouh or 200 x 10 mm Blade length 245 mm Profile steel shear: Shearing capacity, angle iron at 90° 110 x 10 mm Shearing capacity, angle iron at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notching up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz - Center-finding device via hand lever and centering device - Mechanical stroke release via hand lever - Flat bar shear equipped with 2° blade - Mechanical clamp on the profile steel shear, round bar shear and on the flat bar shear Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg Good condition

Condition: used, Mechanical quick-action vise, NC machine vise, FRIBOSA, Type, Size B Precision machine vise, grinding vise, clamping device Jaw width 100 mm Jaw height 34 mm Gedpfxsilx Ufe Aihsuh Clamping range 0 to 130 mm Guide rail height 40 mm Guide rail length 270 mm - Mechanical machine vise - Clamping range via trapezoidal spindle - Sturdy base, ground on all sides - Can be mounted horizontally, vertically, or laterally Dimensions L x W x H 310 x 100 x 77 mm Weight: 10 kg Good condition

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d with die for weldingwire extrusion or profilextrusion Gsdpsi Tu U Uefx Aihouh with cooling bath with adhesive water blow-off with haul-off with winder and guiding device

Condition: ready for operation (used), Year of construction: 2002, Profile T18 Feed width 1250 mm Material thickness 0.5 – 0.63 mm Year of manufacture 2002 Guodpohryh Uofx Aihoh Control system: Siemens PLC (new) The machines can be inspected in operation at our plant in 94486 Osterhofen after prior arrangement.

Condition: used, Year of construction: 1995, Technical details: Guedpfx Aex Uzvpsihoh grinding length: 1250 mm grinding width: 600 mm workpiece height: 730 mm table surface area: 1720 x 500 mm headstock: dist. table - spindle center: 900 mm max. longitudinal movement: X-1450 feed range: 10 - 20.000 mm/min vertical movement: Y-730 mm feed range: 0,2 - 3.000 mm/min cross travel: Z-550 mm feed range: 5 - 5.000 mm/min power capacity: 1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds: 50-6.000 U/min cutting speed: max. 80 m/sec. weight of the machine ca.: 11 t with CNC SIEMENS 840 C auto. dynamic balncing system integrated in the grinding conus profile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpm two magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect. *

Condition: used, Year of construction: 2021, total length: 4,000 mm, total width: 1,200 mm, total height: 1,750 mm, overall weight: 1,000 kg, power: 7.3 kW (9.93 HP), No. 04539 Profile sanding machine / automatic edge processing machine Rehnen KBA Used, year of construction 2021, low operating hours Godpfx Aszhbzceihjuh Profile sanding machine / automatic edge processing machine for sanding edges, routing profiles and sanding profiles in through-feed operation Materials to be processed: solid wood, chipboard and MDF Fields of application: stair construction, furniture production, shopfitting, interior finishing, etc. Material thickness up to approx. 90 mm, centrally adjustable by handwheel Variable feed speed up to 6 m/min Total power 7.3 kW Pneumatically controlled and tracing profile sanding shoes with standard sanding belts Longer belt life due to long sanding belts and pneumatically height-adjustable oscillation High material removal thanks to calibrating roller - Continuously adjustable oscillating sanding unit (between 30 - 130 mm) / sanding and fine sanding via contact roller and sanding shoe / sanding belt size edge 2000 x 150 mm - 2 routing units with profile cutters 50 x 10 x 16 mm, Z4 / routing of radii, profiles and chamfers on top and bottom at 12000 rpm / controlled via frequency inverter - 2 profile sanding units for profile sanding with endless sanding belts via application-controlled, air-cooled steel profile sanding shoe / sanding belt size profile 30 x 1960 mm - Extendable roller conveyor at the front - Extraction connection diameter 160 mm - Workpiece feed via chain plate conveyor Transport dimensions approx. 4000 x 1200 x 1750 mm LWH Weight approx. 1000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Workpiece and profile stop good condition cleaned function tested partially refurbished Manufacturer: Festo Type: UP 65 Machine No.: 771226 Number of spindles: 1 Spindle diameter mm: 40 Clamping height / width mm: 200 Working width mm: 200 Profile depth mm: 65 Gusdpfszkvyrex Aiheh Milling height mm: 110 Tool diameter mm: 250 Rotational speeds RPM: 4300 Table size mm: 660x350 Lift table pneumatic Profile stop Workpiece clamping pneumatic Motor kW: 7.5 Dust extraction connection mm: 100 Space requirement approx. L x W x H mm: 1300x700x1200 Total connected load: 7.5 Storage location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without warranty

Year of construction: 2022, operating hours: 1,700 h, condition: excellent (used), functionality: fully functional, cutting length (max.): 6,500 mm, machine/vehicle number: C127713, Twin head cutting-off machine, for cutting aluminium and PVC bars in various thickness and angles. Gedpfx Aszb I N Ioihjuh

Condition: used, Year of construction: 2019, machine/vehicle number: T17157, functionality: fully functional, operating hours: 32,000 h, input voltage: 40,000 V, input current: 4,000 A, input frequency: 10,600 Hz, type of input current: three-phase, oil tank capacity: 300 l, total length: 42,400 mm, total width: 11,200 mm, total height: 5,100 mm, overall weight: 107,250 kg, year of last overhaul: 2026, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, FOR SALE – BYSTRONIC FL400 TUBE & PROFILE LASER CUTTING SYSTEM High-Performance Laser Cutting Machine for Tubes, Profiles and Structural Sections As part of a strategic investment and the acquisition of a new MAZAK FG-400 NEO tube laser system, we offer for sale our Bystronic FL400 laser cutting machine. The machine has been operating in a professional steel service center and remains in daily production use. It is offered for sale due to replacement with a new system. _____ General Information: Machine: Bystronic FL400 Year of Manufacture: 2019 Installation & First Commissioning: October 2019 Current Location: Mikołów, Poland Condition: Fully operational and currently in production _____ Technical Specifications: Laser Source • CO₂ Laser Source • FANUC Resonator Godpfjzqudpox Aiheuh • Laser Power: 4,000 W Loading & Unloading Capacities • Maximum Loading Length: 14,000 mm • Maximum Unloading Length: 12,500 mm • Maximum Material Weight: 140 kg/m Round Tubes • Minimum Diameter: 40 mm • Maximum Diameter: 406.4 mm Square Profiles • Minimum Dimension: 40 mm • Maximum Dimension: 300 mm Rectangular Profiles • Maximum Section: 300 × 200 mm Structural Sections • HEA / HEB: 100 – 280 mm • IPE: 80 – 360 mm • UPN / UPE: 40 – 240 mm • Angle Sections (L): 40 – 280 mm Maximum Material Thickness • Mild Steel: 20 mm • Stainless Steel: 8 mm • Aluminum: 6 mm Operating Status • Resonator Operating Hours: approximately 32,000 h • Machine remains in regular production operation _____ Additional Information The machine has been operated in a professional Steel Service Center specializing in the processing of steel tubes, profiles, and structural sections. The equipment is available for inspection under power at our facility in Poland. Photographs, sample production parts, and videos of the machine in operation are available upon request. _____ Documentation and Technical Details Detailed technical specifications, machine documentation, maintenance records, and additional operating information will be provided to qualified buyers upon request. Disassembly, packaging, and transport of the machine are the responsibility of the buyer.

Condition: new, Year of construction: 2026, actuation type: electric, number of rollers: 3, shaft diameter: 30 mm, - Shaft diameter 30 mm - Can be operated in both clockwise and counterclockwise directions - Suitable for horizontal and vertical applications - Foot pedal control - Emergency stop switch - Documentation Godpjzmc T Dofx Aihsuh - 400V

Condition: used, ABA MULTILINE 1507 A is a profile grinding machine engineered for precision, high accuracy and reliable operation. Capacities: table 2000x600 mm, grinding area 1500x600 mm, table load max 2500 kg, table‑to‑spindle centre 900 mm; travels X1500, Z750, Y900 mm. Specs: stepless feeds X 2000–35000, Z 5–5000, Y 1–3000 mm/min; wheel speeds 50–2500 t/min; wheel Ø400x60 mm, bore 127 mm; spindle motor 26 kW; supply 3x400V 50Hz; total power 35 kW; weight ≈11000 kg; size 6465x3770x3000 mm. Accessories: paper filtration, magnetic plate 1500x700 mm, lamp, switch‑cabinet air conditioner. Achieves tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace, medical. Gjdpjyxn Iaofx Aiheuh

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, number of rollers: 3, overall weight: 5,000 kg, Equipment: documentation/manual, Profile Bending Machine PARMIGIANI Mod. MERCORI – M. Used. Three-roll horizontal profile bending machine. Immediately available while stocks last. Visualized adjustment control. Supplied complete with tooling for bending flat bars and tubes. New electrical cabinet. User and maintenance manual included. Bending capacity: angle 120 x 120 x 12: min. Ø 1200 mm; U 160 vertical: min. Ø 1000 mm; Flat bar vertical 140 x 40: min. Ø 1000 mm; Flat bar horizontal 120 x 30: min. Ø 1600 mm; Tube 4″: min. Ø 1200 mm. Weight: 5000 kg. Motor power: 380 V, 12 Hp. Gjdpfx Aijyxwdwjhjuh

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Gujdpfex Anpvex Aihoh Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: new, Nikon V-20 B profile projector NEW, never used (new price 52,400 euros) x,y 250 x 150 mm screen around 500 mm 10 x and 20 x magnification light through and light on the product heidenhain quadra chek digital readout with various measuring/ and calculation functions Gjdpfx Ajvlph Aeihsuh turntable to align the product documentation

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Gjdsyhf R Nopfx Aihjuh Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, laser type: fiber laser, laser power: 40,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, power: 12,000 kW (16,315.44 HP), overall weight: 5,000 kg, Equipment: cooling unit, X axis travel distance (mm): 3500mm Y axis travel distance (mm): 28000mm Z axis travel distance (mm): 850mm A axis travel distance (mm): ±90° Godpevzyf Djfx Aihouh C axis travel distance (mm): ±90° U axis travel distance (mm): 30mm Maximum speed: 40m/min Positioning accuracy: ±0.1mm Support steel types: H-beam, channel steel, I-beam, T-beam, angle steel Maximum size of steel section: 1000mm*400mm Maximum weight of steel: 5tons

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: Gjdpfx Aisvibc Hjhsuh NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Condition: new, Year of construction: 2026, CORMAK RBM 30HV Tube and Profile Bending Machine The CORMAK RBM 30HV tube and profile bending machine is a versatile three-roll, non-mandrel bending machine designed for professional bending of steel tubes, rectangular hollow sections, and solid bars. Its compact design, ability to operate in both vertical and horizontal positions, and precise upper roll adjustment make it an ideal solution for workshops, production facilities, and service companies where reliability, accuracy, and application flexibility are essential. Main Advantages of the Machine Non-mandrel bending system – enables bending without deformation of the cross-section, including applications requiring larger bending radii. Vertical and horizontal operation capability – provides flexibility in machine positioning depending on the workspace and production process. Precise upper roll adjustment with vernier scale – allows repeatable and controlled bending operations. Ground and hardened guide rolls – ensure accurate material guidance and long service life of working components. Hardened steel rolls – provide high wear resistance and maintain accuracy during long-term operation. Foot pedal control – enables convenient and ergonomic machine operation. Two-direction roll rotation – allows bending of complex shapes and closed arcs. Construction and Technology The CORMAK RBM 30HV is built on a rigid steel frame that provides resistance to deformation during bending operations. The 30 mm diameter rolls are made of hardened steel, ensuring durability even when working with demanding materials. The adjustable upper roll allows precise setting of the bending radius, while the 0.75 kW drive motor provides sufficient working force while maintaining compact machine dimensions. The machine can operate in both vertical and horizontal configurations, depending on the type of material being processed and available workspace. Precision and Work Efficiency Thanks to the three-roll bending system and precise pressure adjustment, the CORMAK RBM 30HV tube and profile bender provides high bending accuracy, even when processing thin-walled steel tubes and delicate closed profiles. The ability to rotate the rolls in both directions significantly simplifies the production of complex curves and spiral-shaped elements. The rotation speed of 9 rpm ensures an optimal working pace while maintaining full control over the bending process. Applications The CORMAK RBM 30HV is designed for light and medium-duty production and service applications. It is particularly suitable for: metalworking and fabrication workshops, light steel structure manufacturing, tube and profile fabrication in the furniture and fencing industries, production of decorative and functional shaped components. Standard Equipment Side guide rolls Foot pedal control system Technical documentation (DTR) in Polish CE Declaration of Conformity Technical Specifications Parameter Value Round tube capacity 30 × 1 mm Rectangular profile capacity 30 × 30 × 1 mm Gedpfx Asu Snlkjihouh Round bar capacity 16 mm Solid rectangular bar capacity 30 × 10 mm Roll diameter 30 mm Roll speed 9 rpm Motor power 0.75 kW Power supply 3-phase, 400 V Dimensions (L × W × H) 1200 × 750 × 1210 mm Weight 252 kg Manufacturer: CORMAK