Used Hermle Uwf 600 for sale (142)

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm y-travel 600 mm z-travel 500 mm Cgsdpox Dndcjfx Aftop

Condition: ready for operation (used), Year of construction: 2014, operating hours: 37,684 h, spindle speed (max.): 18,000 rpm, overall weight: 30,000 kg, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, number of axes: 5, This 5-axis HERMLE C60U Dynamic was manufactured in 2014. It features impressive travels of approximately 1200 mm in X, 1300 mm in Y, and 900 mm in Z. The machine is equipped with a NC swivel rotary table with a diameter of 1350 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C60U Dynamic universal machining centre we have for sale. Contact us for further details. • Supply voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V • Nominal current: 113 A • Power consumption: 78 kVA • Circuit diagram no.: 1-325-MS-96-021 • Axis configuration: 5 axes (X, Y, Z + A/C rotary table) • Software option: KinematicOpt • Tool interface: HSK-A 63 • Table type: NC swivel rotary table • Table diameter: Ø 1350 mm • Table size: 1350 × 1100 mm • Electronic thermal compensation (iTNC) • Electronic handwheel (iTNC) • Operating hours: 37,684 h • Spindle renewed approx. 600 operating hours ago • Exclusions: Clamping devices, tool holders, tools and zero-point clamping systems shown in pictures are not included Cgjdpfoylzc Njx Aftjp Additional equipment • Through-spindle coolant, 80 bar (high-pressure) • Air blow device • Air through spindle centre • Chip flushing gun • Emulsion mist extraction • Probe: Heidenhain measuring probe • Tool breakage monitoring: BLUM

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,000 h, spindle speed (max.): 18,000 rpm, overall weight: 10,500 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 5, This 5-axis HERMLE C40U universal machining centre was manufactured in 2007. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis, with a rapid traverse of 45 m/min. The machine is equipped with a spindle speed of 18,000 rpm and a tool changer with 38 positions. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U machine we have for sale. Contact us for further details. • Operating voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V • Total power: 41 kVA • Total nominal current: 60 A • Master circuit diagram: 1-322-MS-96-002 • Rapid traverse: 45 m/min • Tool changer: 38 positions • Axis configuration: 5-axis • Linear axes: X, Y, Z Cgedpeyly A Iefx Aftop • Rotary axes: A-axis (off-centre), C-axis (NC swivel rotary table Ø420 mm) • NC swivel rotary table: Ø420 mm • Internal coolant supply (IKZ): 80 bar • Laser tool measurement / breakage monitoring • Measuring probe: Heidenhain • Electronic handwheel • Electronic thermal compensation • Spindle hours: approx. 14,000 h (spindle replaced 11.2017) • Accessories: Without tools, tool holders and zero-point clamping systems Additional equipment • Paper band filter • Chip conveyor • Chip flushing gun • Oil mist extraction Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. Cgsdpsylw Stsfx Aftep • Tool magazine: 30 stations • Table: Rigid clamping table • Coolant system • Electronic Thermal Compensation (iTNC) • Machine on hours: 11,927 h • Spindle on hours: 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2000, Two Hermle C 800 V machining centres for sale. Hermle C 800 V Year of manufacture: 2000 Control: Heidenhain TNC 430 Technical specifications: Cgodpsylkzzofx Aftep X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Table clamping surface: 1000 x 560 mm Max. table load: 1000 kg Distance spindle/table: 100–500 mm Spindle speed: 8000 rpm SK40 30 tool changer positions

Condition: excellent (used), Year of construction: 2008, Opportunity to purchase this outstanding 5-axis HERMLE C30U including an additional tool magazine ZM157. Machine can be inspected in operation upon appointment in the Netherlands. Availability: 05/2026 Full technical specifications in the attached document. Control Heidenhain iTNC530 Max spindle speed 18.000 rpm Tool taper HSK-A63 Tooling magazine ZM157 (157 positions) Linear guides yes TABLE- NC rotary table ø 280 mm Filter Paper belt filter Chip conveyor Scraper belt conveyor Internal coolant supply 80 bar high pressure cooling through spindle Spindle hours ca 45000h Csdpoypbfrofx Aftjgp X 650 mm Y 600 mm Z 500 mm Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: reconditioned (used), Year of construction: 2009, CNC Vertical Machining Center HERMLE C 1200 V Equipped with Heidenhain iTNC 530 CNC control Year of manufacture: 2009 Travel ranges: X 1200 mm, Y 900 mm, Z 500 mm Speed range: 20 – 10,000 rpm, stepless (HSK 63) Includes the following accessories: Cgjdpex Hhctjfx Aftjp - Fixed angular table, clamping surface 1260 mm x 800 mm - Vertical tool changer with 30 magazine slots (HSK 63) - Internal coolant supply, 40 bar - Air blow-off device - Scraper belt conveyor - Rotating clear-view window - Coolant system - Electronic thermal compensation, iTNC 530 - Electronic hand control module HR 410 - 3D measuring probe, Heidenhain - Switch cabinet cooling unit (RITTAL) - Oil mist extraction - Various HSK 63 tool holders, equipped with tools - Spindle oil cooler - Chip flushing gun - 4 height-adjustable machine feet - Operating manuals

Condition: reconditioned (used), Year of construction: 2016, CNC Vertical Machining Center HERMLE C 400 U With Heidenhain TNC 640 CNC Control Year of manufacture: 09/2016 Travel distances: X 850 Y 700 Z 500 mm Spindle speed range: 20 – 18,000 rpm, stepless Including the following accessories: - NC rotary swivel table Ø 650 mm x 540 mm (T-slots for SRT) - Vertical tool changer with 38 magazine slots (HSK 63) - Additional magazine with 50 magazine positions (ZM 50) - Through-spindle coolant supply 40 bar with paper band filter - Scale air purging - Fine filter for through-spindle coolant supply 40 bar - Scraper belt conveyor - Chip cart 450 liters - Coolant unit - Air blow-off unit - Spindle center compressed air - Manual cabin door, manual cabin roof - Polycarbonate safety windows - Electronic thermal compensation - Electronic handwheel - BLUM tool breakage/control & measurement A2 - Heidenhain 3D touch probe - Chip rinsing pistol - Oil mist extraction unit Cedpfx Aow Ewmfoftsgp - Control cabinet cooling device (RITTAL) - 4 adjustable machine feet - Operating manuals

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TC 530, spindle motor power: 15,000 W, swivel angle C-axis (max.): 360 °, number of axes: 5, This HERMLE C30U Vertical Machine Center was made in the year 2006. It is equipped with a HEIDENHAIN TC 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. There are 2 identical units available. Machine Benefits Technical Machine Benefits • Maximum tool capacity 32 • Spindle connection (spindle) din 69871 • Renishaw system predisposition • Air blow through dry machining spindle: yes Cgodpsx D I Sajfx Aftep • 5 axis continuous package: yes • Internal cooling

Condition: excellent (used), Year of construction: 2016, operating hours: 10,250 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, table width: 800 mm, table length: 630 mm, table load: 1,400 kg, overall weight: 12,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10,250 h, coolant supply: 80 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Hermle C42U Dynamic in excellent, well-maintained condition. Travel Paths: X: 800 mm Y: 800 mm Z: 550 mm A: +/-130 degrees C: 360 degrees Equipment: Cgjdpjyma Nkofx Aftsp Control: Heidenhain TNC 640 Spindle interface: HSK-A63 Spindle speed: 18,000 rpm Large machine table: 800 mm x 630 mm Swivel rotary table with tandem drive C-axis with torque drive Dynamic version linear axes IKZ (internal coolant supply) 80 bar with variovalve Scraper belt conveyor Tool changer plus Additional tool magazine ZM50 for a total of 92 tool stations Manual cabin door Manual cabin roof Laminated safety glass window Comfort operator panel External minimum-quantity lubrication Tool measurement A2 Blum (tool breakage/measurement) 3D probe M&H Internal air blow External air blow Bed flushing Handte Compact extraction unit Electronic handwheel Purge air for glass scales Electronic thermal compensation with control functions HIMS basic package Special stop block Interpolation turning TNC 640 Rotoclear visibility aid and more… The machine can be inspected under power by prior arrangement. Machine is immediately available! Loading will be handled by us!

Condition: ready for operation (used), Year of construction: 2003, Make: HERMLE Type of machine: C 800 U Year of manufacture: 2003 Control system: Siemens 840D Machine's weight: 9.000,- Tool holder: SK40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Cgjdetmtxmopfx Aftop Speed range: 16.000 min-1 Number of tools in the magazine: 80 Pl.

Condition: ready for operation (used), Year of construction: 1999, Make: HERMLE Type of machine: C 800 V Year of manufacture: 1999 Control system: Heidenhain 430 Codpeyfgtajfx Aftogp Machine's weight: 7000 kg Tool holder: SK 40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 8 000 min⁻¹ Table dimensions: 1000 × 560 mm Number of tools in the magazine: 30 Pl.

Condition: good (used), Year of construction: 2004, Manufacturer: HERMLE Type: U 1130 Year of manufacture: 2004 Control: Heidenhain iTNC 530 Machine weight: approx. 8500 kg Tool holder: SK 40 X travel: 1300 mm Y travel: 720 mm Z travel: 630 mm Speed range: 18000 rpm Max. table load: 700 kg Operating hours: 50,775 Cjdpfx Aev S Alnjftegp Spindle hours: 21,654 Space required: approx. 3600 x 4500 x 2800 mm Table size: 800 x 1000 Number of tools in magazine: 28 positions Internal coolant supply: 80 bar 3D measuring probe: TS 640 5 axes simultaneous

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, table width: 540 mm, table length: 540 mm, rotational speed (max.): 8,000 rpm, CNC Control: Heidenhain TNC 426 WORKING AREA: X – Y – Z Travels: mm 800 – 600 – 500 FEED RATES: Feed force: N 8,000 Rapid traverse: m/min 30 Acceleration: m/s² 5 MAIN SPINDLE: Power (40% ED): kW 15 Torque (40% ED): Nm 130 Taper: SK 40 Speed range: rpm 20 – 8,000 TOOL CHANGER: Tool magazine capacity: 30 positions Maximum tool diameter: mm 80 With adjacent pockets free: mm 125 Maximum tool length: mm 300 Maximum tool weight: kg 8 NC TILTING ROTARY TABLE: Clamping surface dimensions: mm 540 × 540 Maximum table load: kg 300 Cjdpfxsyq S Dze Aftegp A-axis tilting range: -20° / +90° C-axis rotation range: 360°

Condition: used, Year of construction: 2016, x-travel 450 mm y-travel 600 mm z-travel 330 mm Cgjdpfx Afoym D D Ejtjp a-axis +/-135 0 c-axis 360 0 control Siemens 840 D SL weight of the machine ca. 9000 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 27,804 h, functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 915 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of axes: 5 Maximum spindle speed: 12,000 rpm Table length: 900 mm Table width: 500 mm Number of T-slots: 8 T-slot spacing: 65 mm T-slot width: 14 mm Maximum workpiece weight on table: 700 kg Maximum workpiece length: 900 mm Maximum workpiece width: 500 mm Maximum workpiece height: 500 mm Number of tools: 16 Maximum tool diameter: 125 mm Diameter with adjacent pockets empty: 180 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Tool holder: SK 40 Milling head swiveling range: -5° to +95° Rapid traverse: Longitudinal: 30 m/min Cross: 30 m/min Vertical: 20 m/min MACHINE SPECIFICATIONS Compressed air connection: 6 bar Electrical connection: 50 Hz, 3 x 400 Volt Spindle drive power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB (A) Dimensions & Weight Dimensions (L x W x H): 2,760 x 2,390 x 2,370 mm Csdpfsyhnudox Aftogp Machine weight: approx. 7,300 kg Operating Hours Power-on time: 86,672 h Operating time: 34,362 h Spindle run time: 27,804 h EQUIPMENT 3-jaw chuck Ø 200 mm Workpiece probe HEIDENHAIN TS 640 Rotary table 4th axis HOFMANN type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Electrical cabinet air conditioning unit

Condition: used, Year of construction: 1997, machine/vehicle number: 11968, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, Used HERMLE universal milling machine model U 630 S, year of manufacture 1997, equipped with Heidenhain TNC 410 control and full safety enclosure. Travels: X = 630 mm, Y = 500 mm, Z = 500 mm Table size: 900 x 528 mm, 7x T-slots 14 mm, spindle taper SK40 DIN 69871 Speeds: Gear stage 1 = 20–1,428.6 rpm, gear stage 2 = 1,428.6–7,000 rpm. Separate coolant tank 120 litres, Heidenhain electronic handwheel HS410, Heidenhain measuring probe TS 220 Includes mobile tool trolley for SK40 tool holders with approx. 80 tool holders included. Cgjdpsygwz Rjfx Aftsp The machine is located at our premises in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The used HERMLE C800V high-speed vertical machining center is a medium-sized numerical control machine with a granite portal structure (gantry type), weight 7,200Kg; X 600, Y 500, Z 600 mm strokes, table dimensions 1000x550. Csdpfovx R Hyox Aftsgp Year of construction 2000, with HEIDENHAIN TNC 430, ISO 40 electrospindle at 15,000 (max 19KW) cooled by a special refrigerator, 30-position pick-up tool changer and remote handwheel.

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Cedpsygx Hnefx Aftogp Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: used, Year of construction: 2005, HERMLE - U740 - 2005 - 5 axis - system Heidenhain - table diameter 630 mm - table load 500 kg - spindle 32 kW - spindle max 12000 RPM - X/Y/Z=740/500/500 mm - width of machine 2500 mm Cgodpfxeyl I T Ij Aftsp - height of machine 2400 mm - weight appr. 7300 kg - under power - last service in 2023 - spindle hours 20500+ - fully working good condition as on photos /reason for sale new machine arrival/ - books

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hermle C 800 V vertical machining center was manufactured in 1996. It offers robust construction and precision for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 V machine we have for sale. Contact us for more information about this machine. Machine Benefits Cgjdpfxjyarzre Aftep Technical Machine Benefits • Operating voltage: 400 v / 3-phase / 50 hz • Control voltage: 24 v • Total current: 44 a • Magazine for 30 tools, sk40. Extra Information Machine still under power

Condition: good (used), Year of construction: 2002, operating hours: 49,731 h, Manufacturer: HERMLE | Model: U 630 T | Year of manufacture: 2002 | Operating hours: approx. 49,731 | CNC control: iTNC 530 | Vertical machining | Milling machine | Control panel with screen and buttons | Robust metal construction | Dimensions: approx. 2900 mm x 2200 mm x 2400 mm (W x H x L) | The specified dimensions are approximate values. All other details without guarantee. | Grey | Steel Cgjdpfxeyic Sqe Aftop

Condition: good (used), Year of construction: 2001, operating hours: 54,057 h, Manufacturer: HERMLE | Model: U 1000 T | Year of manufacture: 2001 | Operating hours: approx. 54,057 | Universal milling and drilling machine | CNC control (TNC 426) | Automated tool clamping | Precision motion guidance | Dimensions: approx. 3,600 mm x 2,450 mm x 2,800 mm (W x H x L) | The stated dimensions are approximate values. All other information provided without guarantee. | Grey | Steel Cgodpfoyic R Tex Aftop

Condition: good (used), Year of construction: 1999, Manufacturer: HERMLE | Model: U 630 T | Year of manufacture: 1999 | Operating hours: approx. 54,135 | Control: Heidenhain TNC 426/410M; Spindle mount: SK 40 (or ISO 40); Max. spindle speed: 7,000 rpm; Table clamping surface: approx. 900 x 528 mm; Max. table load: 400 kg; Tool changer: 16-position magazine; Machine weight: approx. 4,800 kg; with accessories; | Dimensions: approx. 3000 mm x 2200 mm x 2400 mm (W x H x D) | The specified dimensions are approximate. All other information without guarantee.| Grey | Steel | Working travel (X/Y/Z): 630 mm / 500 mm / 500 mm Cjdpfx Afoyic Ryjtsgp

Year of construction: 1997, condition: ready for operation (used), X-travel: 630mm, y-travel: 500mm, z-travel: 500mm, table diameter: 900x528mm, NC rotary table diameter: 500mm, connected load: 14kVA, length: 3600mm, width: 3900mm, height: 2100mm, weight: 6t, with documentation. Cgsdpfjlc N Stox Aftep