Used High Pressure Casting Machine for sale (78,649)

Condition: like new (used), Year of construction: 2025, operating hours: 250 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Year: 09/2025 2800 BAR Manufacturer's warranty Codpsvgrpxefx Afnogn Engine: DEUTZ TCD 6.1 ST5, 140 kW Available immediately

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Nilfisk Dryft is the effortless path to more thorough and efficient cleaning. Our first micro-scrubber dryer is more hygienic than a mop and as compact as a stick vacuum. It easily cleans even hard-to-reach areas—crowded spaces, challenging corners and edges, narrow gaps, and around obstacles. It is the natural, modern successor to the mop. Effectively removes bacteria. Orbital scrubbing head delivers high cleaning performance (4,200 oscillations per minute). Uses one third less water than comparable products. Cgjdexx Tw Rjpfx Afnon Rapid battery charging and swapping with 1 hour runtime/charging time. Click-on/off system for quick pad changes. Squeegee bar removes quickly and without tools. Service kits for easy replacement of wear parts. Control panel with only 3 buttons and customizable settings. S-motion pattern enables fast and effective cleaning of large areas. Low-profile scrub deck cleans under furniture and shelving. Unique scrub deck design enables edge and corner cleaning.

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Clean, strip, remove, demolish, and roughen Cgedpjv S Ep Aofx Afnon The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids.

Condition: ready for operation (used), A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible. Cgjdoxxa T Ejpfx Afnon

Condition: new, Year of construction: 2025, Operating Area: 3048*1524mm Machine overall dimensions: 4960×2280×2200mm Laser Output Power: IPG 3000w/2000w/1500w Bwrzu0tz8a X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 100m/min Cgodpfxjg Duzws Afnen 1. A Compact Design with Complete Protection Small occupied space balances complete protection and higher safety. 2. Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 3. Cast Iron Bed Featuring good shock absorption, Cast Iron Bed keeps its shape all the way with the optimal mechanical property.

Condition: used, Year of construction: 2007, operating hours: 5,573 h, functionality: fully functional, operating pressure: 1,200 bar, power: 122 kW (165.87 HP), pump capacity: 40 l/min, Equipment: type plate available, FALCH type T12, year of manufacture 2007, machine output 122KW/1200BAR/40 litres per minute. The unit is fully functional, featuring a bypass modification from water to air and a refurbished external machine cover. Supplied with basic equipment: control gun with rotary nozzle, control cable, and 20m high-pressure hose. Cgjdpfx Ajxyx Evjfnen

Year of construction: 2008, condition: used, High-pressure KAMAT pump with IVECO diesel power unit in fully operational condition featuring new Siemens electronic controls. Machine output: 130 kW/1180 bar / 57 l-min. The unit has its own stainless steel water tank with a capacity of 3,000 liters. VOLVO FL 240 truck with hydraulic tail lift, year 2009, 154,989 km. The machine can also be sold separately without the truck. Price for standalone KAMAT unit: €20,000. Price for VOLVO: €13,500. Codpfx Asxyxy Hjfnsgn

Condition: used, 2 no. LNS Chipblaster SA-34K year 2019 and 2022, high pressure coolant system Cedpfx Afewz Iipjnogn

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle high pressure compressor Type: D44 Year of manufacture: 2000 Operating pressure: 40 bar Power: 220 kW Codpfx Afjf Hly Sonegn Speed: 839 RPM Compressor can be inspected at any time.

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately Cgsdpfju Hz Tqex Afnon + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Cgsdpsrl U S Eofx Afnon Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump

Condition: used, Hydraulic power unit with piston pump PUMPEN WART in Erkrath High-pressure pump, high-pressure hydraulic unit (in need of repair) Type SJK2C Serial No. 48315, Order No. 230045 Year of manufacture: approx. 1975 Pressure capacity: 1000 bar (according to nameplate) Flow rate: 25 liters/min (according to nameplate) Cjdpfxoxcimpj Afnjgn Flow rate: 25 liters/min (at 0 bar) Flow rate: approx. 3 liters/min (at 1000 bar) Piston pump with 2 pistons, 50 mm stroke 280 double strokes per minute Tank capacity: approx. 100 liters Motor power: approx. 11 kW Power connection: 380 volts, 50 Hz Required space (L x W x H): 1000 x 600 x 1200 mm Weight: approx. 350 kg No proper function during test run, although the unit was last used on a test bench. Possible issues due to extended downtime and storage period. Sale without functional guarantee, without technical demonstration, at a special price.

Condition: new, Year of construction: 2025, Operating Area: 1000*1500mm Machine overall dimensions: 3630×2200×1940mm Laser Output Power: IPG 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 60m/min 1. A Compact Design with Complete Protection Small occupied space balances complete protection and higher safety. 2.No Quiver when Cutting Thin Sheet Cedpfxog Rgvhj Afnsgn i Series are capable of cutting edges of thin sheet and ensure no quivering marks.

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Cjdpfx Ajxufbtefnsgn Standard accessories included.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, Cjdpfexugifjx Afnogn For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min 32A plug Best regards, STS-Reinigungstechnik Team

Condition: used, Year of construction: 2022, operating hours: 45 h, functionality: fully functional, operating pressure: 3,000 bar, fuel: electricity, Demonstration machine, Machine available immediately. Only used for demonstrations. Only 45 hours on the hour meter. Csdpfx Afsxwb Egjnegn Technical condition: like new. Complete set: Robot + radio remote control + control unit + support winches. Operates with a 200 kW high-pressure pump (recommended by the manufacturer, but can be configured differently). Worldwide shipping available. Similar to, but better than: Vertidrive, Falch, Kamat, Robot PlusPlus. SPIDERJET® surface preparation devices — Whether cleaning, paint stripping, or de-coating large steel structures such as ships, tanks, or vessels, the SPIDERJET® surface preparation equipment delivers fast and clean results and, thanks to compact versions, can be maneuvered even through the narrowest areas. Minimal setup times ensure rapid deployment, and the use of high-pressure water without additives or chemicals protects the environment. High coverage rates and semi-automatic operation reduce working time and costs while increasing work safety.

Condition: good (used), machine/vehicle number: 897, Jaw width: 160 mm Jaw height: 50 mm Clamping width: 280 mm Overall height: 130 mm Cgedpfx Asb Dimvefnjn

Year of construction: 1997, condition: ready for operation (used), machine/vehicle number: 41110, Nominal pressure: 110 bar with existing delivery volume: 6 l/min max. supply pressure: 12 bar Cgodpfsd D U T Rex Afnon electrical connection: 230 V, 1,5

Condition: ready for operation (used), machine/vehicle number: 838 621, minimum pressure: 180 mbar at suction capacity: 2,2 m³/min Cgedpfjdzw I Nox Afnon outlet nozzle-Ø: 50 mm rotational speed: 2780 rpm drive motor: 220/380 V, 0,95 kW space requirement: 510 x 350 x 480 mm

Condition: excellent (used), Normal drilling capacity 20 mm Continuous drilling capacity in St 60-2 / E 335 18 mm Spindle holder MK 2 10 spindle speeds 240 - 3800 rpm. Drilling depth 100 mm Projection 215 mm distance spindle/table up to 360 mm distance spindle/base plate 560 mm table surface 350 x 290 mm Column diameter 75 mm Motor pole-changing 0.6/1.2 kW Total height 1050 mm Weight 100 kg Cedpfx Aefzbkhofnjgn Today's new price: 4.022,00 € net Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, empty load weight: 40 kg, warranty duration: 24 months, input frequency: 230 Hz, SPECIFICATION: Model: KPC-3.5P Codpfjw Icciox Afnjgn Code: K8.011.0051 Voltage/Hz: 230/50 Pressure (Bar): 120/150 max Flow Rate (L/h): 660 Power (W): 3000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH INTEGRATED BYPASS VALVE 18 mm CERAMIC PISTONS STAINLESS STEEL INLET AND OUTLET VALVES INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS STOP&GO FUNCTION EQUIPPED WITH PROFESSIONAL ACCESSORIES FEATURING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR REMOVING ALL TYPES OF CONTAMINANTS AND SURFACES INCLUDES A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL BRAIDED HOSE Why choose a crankshaft pump with ceramic pistons? - The crankshaft pump is a solution renowned in industrial applications. Its robust design ensures a significantly longer service life compared to more affordable washers equipped with axial or rotary pumps. - Ceramic pistons offer exceptional resistance to high temperatures and wear, providing reliable and quiet operation for years. - Thanks to this construction, the unit can be used in continuous operation mode without the risk of overheating or excessive component wear.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 56 kg, warranty duration: 24 months, input frequency: 400 Hz, SPECIFICATION: Model: KPC-5.5TP Voltage/Hz: 400/50 Pressure (Bar): 200 Cgsdpfx Asw Ickasfnsn Flow Rate (L/h): 900 Power (W): 7200 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, DIAMETER 18 mm STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS EQUIPPED WITH PROFESSIONAL ACCESSORIES, INCLUDING 4 NOZZLES OF DIFFERENT SPRAY ANGLES TO HANDLE ANY TYPE OF DIRT AND SURFACE FEATURES A PRACTICAL HOLDER FOR ACCESSORY STORAGE AND A PROFESSIONAL BRAIDED HOSE Advantages of a crankshaft pump with ceramic pistons: - Precise operation and very high efficiency – these pumps are indispensable in environments where reliability over many hours of daily operation is crucial. - Minimal component wear – ceramic pistons are far more durable than steel ones, so they require less frequent servicing. - Resistance to chemicals and variable temperatures – they perform excellently even when working with aggressive chemicals and hot water. - Smoother operation – the pump runs more quietly and generates less vibration, improving operator comfort. Low-speed Motor – Professional design: - 1450 RPM ensures lower component wear and reduced noise emissions. - Designed for heavy-duty operations, ideal for tasks requiring continuous and extended use.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 230 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, warranty duration: 24 months, SPECIFICATION: Model: KPC-7.5TP Voltage/Hz: 400/50 Max Pressure (Bar): 230 Flow Rate (L/h): 1080 Codpfx Aow Icn Sefnjgn Power (W): 10,000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, 18 mm DIAMETER STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS PROFESSIONAL ACCESSORIES INCLUDING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR ALL TYPES OF SURFACE AND CONTAMINANT EQUIPPED WITH A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL, BRAIDED HIGH-PRESSURE HOSE Crankshaft pump with ceramic pistons – uncompromising quality: - This pump type represents the top tier among pressure washers – ensuring reliability, precise operation, and long service life. - Ceramic pistons are highly resistant to wear, significantly extending maintenance intervals. - Ideal for continuous use – with no performance loss, even after many hours of daily operation. Low-speed motor – built for extreme workloads: - Operates at 1,450 rpm, minimizing mechanical wear. - Powerful, efficient, and properly cooled for demanding, all-day applications.

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Csdpfx Aevylh Uofnjgn Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: new, Technical data: Drilling capacity in steel: 50 mm Tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm spindle: MK 4 throat depth: 340 mm Speeds: (6) 50 - 1510 1/min quill stroke: 200 mm quill feed: 0,1 / 0,2 / 0,3 / 0,4 mm/rev table size: 820 x 240 mm traverse path X: 460 mm traverse path Y: 280 mm column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - thread tightening spindle - Thread cutting device - Automatic spindle feed - LED machine light - Rotatable table - Manual fine feed - Coolant device - Height adjustable protective cover Cgedpfjpxmlqex Afnsn - Limit switch protected spindle