Used High Pressure Cleaning for sale (34,009)

Year of construction: 2025, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1 to 80 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blow gun inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves Fsdpfx Ajf A Nqqom Espp • Window made of tempered glass • Door opening/closing system with gas spring support • Door opening monitoring via safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Internal lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm • External mini pneumatic oil separator

Condition: good (used), Heavy duty high pressure washer. Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Delivery is available. Fsdpfoh Rkiljx Am Eepp

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam – similar, but not a Dynajet, Oertzen, Falch, etc. Fpodpofh Skajfx Am Esp - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfecting. The following models are available: - TORPEDO MINI-E 3.8 M 230 Volt/50 Hz Powersteam, 8 l/min at 150 bar - TORPEDO MINI-E 5.8 T 400 Volt/50 Hz Powersteam, 8 l/min at 200 bar - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg - Includes 10 m high-pressure hose, spray gun, lance, and flat spray nozzle 25°.

Condition: new, Year of construction: 2026, functionality: fully functional, Mobile high-pressure waste container washers Autonomous container unit, independent from the chassis. Specifications: - Hydraulic lifting and lowering, - Washes either two small containers (120–240 L) or one large container (1100 L), - Two washing nozzles, - Programmable washing cycles, - Honda engine or equivalent, - Power generator Low operating costs: - 3.5 t permissible gross vehicle weight for the chassis, - Only a few liters of petrol for an entire working day, - Water recycling system (average 800–1000 liters per day), - Up to 100–150 containers (120–240 L) cleaned per day, - Biodegradable cleaning and disinfecting agents (EU-certified). Versatile applications: - The unit can be removed from the truck bed and used separately (especially important during winter). Fpodpfx Ajwmln Tom Esp Additional options: - Cleaning of construction machinery, gardens, parks, playgrounds, kindergartens, schools, offices, traffic signs, facades, parking lots, and much more. - Hot water function. - Power sockets (mobile generator) for your electric tools. - Quick couplings for an additional water tank. More photos and videos available on request.

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Fpodpfxjygmhto Am Ejp

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction Fpedpfx Amjyxy D Ts Esp - "Super simple" maintenance: quick removal of packing and valves

Condition: like new (used), Year of construction: 2018, Dynajet 500th Pressure Washer Year of manufacture: 2018 Max. temperature range: 95°C Brand: Dynajet Mobile: yes Serial number: 62005720 Type: 500th Maximum working pressure: 500 bar With remote control; water tank 1000 l; unladen weight 1420 kg; approx. 30 m high-pressure hose; approx. 25 m filling hose; operating hours: 597 hours; tested and fully functional Fpodjyigr Uspfx Am Eop

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity Fedpfxsfdkb Ee Am Eepp - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: good (used), Year of construction: 2002, operating hours: 46,928 h, functionality: fully functional, total width: 1,400 mm, total length: 1,500 mm, total height: 1,400 mm, type of input current: AC, overall weight: 1,800 kg, input voltage: 400 V, Technical specifications of the JCP 45 in detail Parameter Specification / Value Rated power 45 kW Maximum pressure 4,000 bar (constant working pressure) Flow rate 4.7 l/min (up to 5 l/min at reduced pressure) Pressure ratio 1:13 to 1:16 (oil to water pressure) Fedpj Agvb Uefx Am Eopp Maximum oil pressure 300 bar Pressure stages 2 pressure stages / continuously adjustable Electrical connection 3x 400V / 230V, 50Hz Required air pressure min. 6 bar (maximum 7 bar for control) Cooling system Oil-water cooling or alternatively oil-air cooling Noise level approx. 78 dB Dimensions (W x H x D) 1,500 x 1,400 x 1,400 mm Weight 1,800 kg

Condition: excellent (used), Year of construction: 2008, Stationary high-pressure pump unit Hammelmann HDP 77 on a base frame. Similar to/not an Uraca, Woma, or Kamat. Fpsdpfod Rmqpsx Am Eop Pump type: HDP 77 Operating pressure: 490 bar Flow rate: 59 l/min Drive speed: 1800 RPM Drive power: 65 kW with AC 55 kW 3~ motor AH 250 M-4; 400V; 50 Hz with frequency inverter Dimensions L x W x H: approx. 1665 x 1212 x 1641 mm Weight: approx. 1050 kg Year of manufacture: 2008 Condition: in very good used condition. Includes complete documentation.

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C3.00202.1212, total width: 1,000 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,740 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 254 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 202 mounted on a base frame. Similar but not Kamat, Uraca, or Woma. Pump type: HDP 202 Operating pressure: 340 bar Flow rate: 254 l/min Drive speed: 1500 rpm Fodpfx Asyacaxsm Eopp Drive power: 157 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x1000x1450 mm Weight: approx. 1740 kg Year of manufacture: 2023 Condition: In January 2026 new piston seals were installed and valves checked. In very good used condition.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, HAMMELMANN® Aquajet 50™, HDP503™, manufactured in 2023, approximately 800 operating hours. Installed in a 20´ soundproof container. Scania® diesel engine, 566kW, Stage V, AdBlue™. ES4™ control unit. 1600 bar / 166 liters. Fully inspected. Ideal for hydrodemolition robot applications and industrial cleaning (TRG 1600 XL). Trailer not included. Fpsdpfx Amezy Hahs Eep

Condition: excellent (used), Year of construction: 2008, Stationary high-pressure pump unit Hammelmann HDP 127 on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 127 Operating pressure: 600 bar Flow rate: 66 l/min Drive speed: 1500 rpm Drive power: 74 kW with SCHORCH KA7280S-BB01B-Z 3~ IP55 75kW electric motor, with pressure regulating valve, Fpsdpfoh Uc Iuex Am Eep with safety valve, with oil cooling system. Dimensions L x W x H: approx. 1,700 x 1,000 x 1,300 mm Weight: approx. 1,300 kg Year of manufacture: 2008 Condition: In very good used condition.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Fpsdpezz Achsfx Am Esp Year of manufacture: 2015 Motor power: 22 kW Stroke length: 182 mm Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar

Condition: like new (used), Year of construction: 2025, operating hours: 400 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Fpodpfx Asvgrpxsm Eop GWARANCJA PRODUCENTA SILNIK DEUTZ TCD 6.1 ST5 140 KW DOSTĘPNY OD ZARAZ

Year of construction: 1998, condition: good (used), machine/vehicle number: 98.01112.1773, Stationary high-pressure pump unit Hammelmann HDP 122 on a base frame, without motor. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l/min Drive speed: 1500 rpm Drive power: 55 kW Without motor, With pressure regulating valve, With safety valve, With oil cooling system. Fodpfx Aegz H Akjm Espp Dimensions L x W x H: approx. 2000 x 1000 x 1400 mm Weight: approx. 300 kg Year of manufacture: 1998 Condition: in good used condition.

Condition: used, Vertical multistage high-pressure centrifugal pump GRUNDFOS Type CR8-80 A-A-A-BUBE Model B4250008 P1 9535 Year of manufacture 1995 Nominal flow rate 9.5 m³/h Nominal head 67 meters = 6.7 bar Pump pressure max. 16 bar Operating temperature max. 120 °C Nominal speed 2900 rpm Motor power 3 kW Fsdpfxj Ahzl So Am Eepp Mains connection 400 volts, 50 Hz - Pump design with 8 stages - Pump components made of stainless steel 1.4301, pump base made of cast iron - Connection flanges DN 40 - Suitable for potable water supply, irrigation and drainage Space requirement pump L x W x H 250 x 200 x 870 mm Weight 50 kg Very good condition, overhauled from stock, not used after overhaul Not a submersible pump or a deep well pump.

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Fpsdpfx Aorhidmjm Eop Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: good (used), functionality: fully functional, ALLMATIC NC high-pressure chuck - Type NC 160 Fjdpfjzlytrex Am Espp - incl. 2 sets of jaws - incl. angular bracket for horizontal machining - incl. base plate 350 x 350 mm

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Fpodpsfzrapofx Am Eop

Condition: used, SAACKE VENTA MHI 25-56 A Industrial Radial Fan / High-Pressure Blower / Exhaust Fan, Used Equipment Main Data and Specifications: Fodpfx Ams Ahqlvj Ejpp Manufacturer: SAACKE GmbH & Co. KG, Bremen / VENTA GmbH, Schwäbisch Hall Type: MHI 25-56 A Order No. (Auftrags-Nr.): VN1HU-011398-000 Serial No. (A.Nr.): 26079/1 Model No. (M.Nr.): 33526 Airflow rate (Vn / V): 3950–4242 m³/h Pressure (ΔpS / ΔpT): 34.0 mbar / 37.5 mbar Rotational speed: 2930 rpm Motor Specifications (SCHORCH Three-Phase Motor): Power: 7.5 kW Voltage: 380/660 V (Δ/Y), 50 Hz / 440 V, 60 Hz Current: 15.5 / 8.9 A Rotational speed: 2920 rpm Mounting arrangement: IM B3 Protection rating: IP54 Overall Dimensions: Width: 680 mm Depth: 870 mm Height: 990 mm Weight: 210 kg Inlet and Outlet Dimensions: Inlet opening: Ø 260 mm Outlet opening: 280 × 180 mm

Condition: good (used), Year of construction: 2017, machine/vehicle number: HD 11610556, pressure: 350 bar, overall weight: 850 kg, power: 30 kW (40.79 HP), Equipment: type plate available, Used high-pressure plunger pump with integrated gearbox and special crosshead seal. Designed for low-viscosity media. Main areas of application in industry and services: - Sewer cleaning - Descaling - Industrial high-pressure cleaning - Special applications Technical specifications: Type: KD716-GK Year of construction: 2017 30kW Pressure: 350 bar 1500 1/min 47 l/min With Elektra electric motor 14BG 220-4AA60-Z 225S Fodstuqlxjpfx Am Eopp 400 / 690V 68 / 39.5A 50Hz 37kW 1475 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 PUmpe

Condition: good (used), DHI PPCH-G High Pressure Gas Controller/Calibrator 100MPa / 15,000psi With Carry Case Pressure control to 100MPa (15,000 psi). AutoRange feature. One of two Q-RPT’s in each controller with 10:1 turndown. Supports external reference pressure transducers. FLASH memory for simple and free embedded software upgrades. Fodpfe Ad D Nlox Am Eepp

Condition: used, mileage: 132,300 km, power: 228 kW (309.99 HP), first registration: 01/2005, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 6x2, wheelbase: 5,170 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 9,720 mm, total width: 2,550 mm, Equipment: ABS, electric window regulation, tachograph, trailer coupling, = Additional Options and Accessories = - Digital tachograph - Lift axle - Air suspension - Power take-off (PTO) - Radio/CD player - Tow hitch Fsdsz Smwwopfx Am Eopp = Further Information = Front axle: Tire size: 385/55 R 22.5; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70 R 22.5; Double tires; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire size: 315/70 R 22.5; Tire tread depth left: 25%; Tire tread depth right: 25%; Suspension: Air suspension Unladen weight: 16,980 kg Payload: 11,020 kg GVWR: 28,000 kg Pump: Yes Water tank: Yes Damage: None

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, High pressure pump from PTV WJ3030B-1Z waterjet cutting machine. Pump, reducer, main motor of 37 kW, flush valve are overhauled. H2O Jet intensifier 60K 301001-1-R. Fsdoyxmmzopfx Am Espp