Used Hoffmann Hr 150 for sale (39)

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 100308, type of input current: AC, input voltage: 230 V, input frequency: 50 Hz, Manual dovetail milling machine, type X_line 20 Bedpfs Af Utpjx Amgelp Motor: 450 watts, Milling depth: 0 - 80 mm, Dovetail size: W 1 / 2 / 3, Maximum passage height: 110 mm, Manual tool clamping, Dust extraction port: D = 60 mm, Includes dovetail cutter W2 Weight: approximately 19 kg, As inspected, pickup from Seevetal location, Ex works, excluding freight and packaging, Subject to prior sale.

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 180.1001, functionality: fully functional, input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, We are offering this very well-maintained Hoffmann + Kuhnheinrich 180 four-sided planer, year of manufacture 1997. Bjdpfjy D Nc Njx Amgolp Manufacturer: Hoffmann + Kuhnheinrich GmbH Machine type: 180 Year of manufacture: 1997 Machine no.: 180.1001 Voltage: 380 V Rated current: 32 A Frequency: 50 Hz If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2007, liter capacity 100 / 154 / 52 l Control OP77A Siemens tank capacity 2800 l total power requirement 46 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,7 x 2,5 x 3,56 m Bledpfx Amjvxwq Sjgjp Suction belt filter HSF 150 E / was operated on a grinding machine with OIL Machine supply pump 1 100L 2.5 bar Machine supply pump 2 154L 20 bar / 52L 60 bar Cooling unit OED RK-V-2 with 25kW cooling capacity Tank volume 2800L Clean tank 1050L capacity Dirt tank 1750L capacity Filter capacity min. 375L / max. 600L for emulsion Filter capacity max. 300L for oil

Condition: new, machine/vehicle number: 01-08070, Filter belt, plastic endless belt oil filter system Hoffmann Bledpfxeqmnp Do Amgjp Completely new, packed and ready for immediate delivery. Item number: 74-41515070 Make number: 01-08070 Dimensions: 5150 x 995 mm 70µ

Condition: like new (used), Year of construction: 2003, functionality: fully functional, center height: 160 mm, From surplus stock: Like-new NC axis HOFFMANN RW/NC160, complete with coupling and servo motor, for use as a 4th axis. Bodpjzvd Rvefx Amgelp

Condition: used, Garant Oil Cabinet, 145x72x75cm Design: Sturdy steel sheet construction with reinforced hinged doors, lockable by means of a sliding handle with a pin cylinder lock. The cabinet body is equipped with a single-drawer locking mechanism. This ensures that only one drawer can be opened at a time, thus largely preventing the cabinet from tipping over. Drawers and shelves can be positioned in a 25 mm grid. Oil cabinet, equipped with plastic oil canisters. Drawers/shelves load capacity: 200 kg Drawer extension (partial/full extension): 100% Drawer extension: Extension lock Height adjustment in grid: 25 mm Pin cylinder lock: modular plug-in insert HxWxD = 145x72x75cm Without key Item condition: used Blsdjk Shv Hepfx Amgjp RRP €3240 You can find more control cabinets – new and used – in our shop! International shipping costs on request!

Condition: used, maximum load weight: 5,500 kg, overall weight: 7,500 kg, axle configuration: 2 axles, first registration: 09/1994, next inspection (TÜV): 02/2026, loading space length: 4,660 mm, loading space width: 1,890 mm, total length: 6,940 mm, total width: 2,500 mm, Hoffmann low loader, type LTD 11.T, de-rated, in standard version with loading ramps, air brake system, front toolbox, TÜV valid until 02/2026, in good and ready-to-use condition. Bodpfjxq Uf Hsx Amgolp

Condition: used, Table model, maximum milling depth: 70 mm, minimum workpiece width: 10 mm, minimum workpiece height: 8 mm, maximum workpiece height: 110 mm. Dimensions: 560 x 620 x 770 mm. Weight: approx. 30 kg. Storage location: Nattheim. Bsdpfe Afzznsx Amgolp

Condition: used, Table model, maximum milling depth: 70 mm, minimum workpiece width: 10 mm, minimum workpiece height: 8 mm, maximum workpiece height: 110 mm. Dimensions: 560 x 620 x 770 mm. Weight: approx. 30 kg. Storage location: Nattheim. Blsdpfx Ams Afzyqegop

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications due to pneumatic height adjustment. Blodpoyfta Tsfx Amgjp Angled dowel drilling and picket drilling can be easily realized thanks to the rotatable drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching is then done pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be placed on the table at the front and rear 2 swivel workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swivel elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: good (used), functionality: fully functional, Dovetail cutter / Trapezoidal groove cutter with stops. Bedpjzvn Hbjfx Amgelp

Year of construction: 2017, condition: used, Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system. Weight approx: 1700 kg Dimensions W x D x H: 1900 x 1200 x 2400 mm Cutting disc diameter: Max. 200 mm Drive power grinding motor: 4,0 kW Workpiece length without loader magazines: 3 - 450 mm Workpiece diameter without loading magazine: 3 - 32 mm Workpiece length with loader magazine: 1-350 mm Blodpfxov Uw U Ns Amgep Workpiece diameter with loading magazine: from 3 - 20 mm

Condition: excellent (used), Year of construction: 2020, liter capacity 240/300 l feed pressure siehe Plan bar coolant capacity 2900 l Bedswgizwepfx Amgslp Filter capacity 6 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m

Year of construction: 2015, condition: ready for operation (used), A variety of semi-automatic and automatic window production machines is available. 1) Selecta BSS, year of construction: 1994, machine dimensions X/Y/Z: approx. 800mm/500mm/1200mm, weight: approx. 50kg. 2) Pneumatic press Urban, year of construction: 2011, operating pressure: 0.8MPa, air consumption: 4l/stroke, stroke: 20mm, machine dimensions X/Y/Z: approx. 850mm/850mm/1200mm, weight: approx. 130kg. 3) Pneumatic slot milling machine Hoffmann PU2-VH, year of construction: 2002, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 5) Selecta FC 106, year of construction: 1994, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 50kg. 6) Wood and aluminum punching machine Batimet FOM, year of construction: 2004, machine dimensions X/Y/Z: approx. 1000mm/1100mm/1500mm, weight: approx. 60kg. 7) MLA M7 GLF 100, year of construction: 2015, power: 1.1kW, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 750mm/850mm/1200mm, weight: approx. 50kg. 8) Machine dimensions X/Y/Z: approx. 400mm/400mm/1250mm, weight: approx. 50kg. 9) Wood and aluminum miter saw Hoffmann MS-35, year of construction: 2003, power: 2x18kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 200kg. An on-site inspection is possible. Individual sale possible. Bljdpfx Asucw Tiomgjp

Condition: good (used), Year of construction: 2008, workpiece weight (max.): 5,000 kg, total width: 2,000 mm, total length: 3,500 mm, total height: 1,800 mm, Railway machine Hofmann - I-110K B11-VIS MACH-ID 9626 Make: Hofmann Type: I-110K B11-VIS Control: CEMB B11 Year: 2008 Balancing machine for wheel sets Work load up to 5000 Kg Kell B11 Vision CEMB controller Rail track gauge: 500-1435mm Max. wheel tread Ø: 1500mm Min. wheel tread Ø: 200mm Bjdpjy Uvgcefx Amgjlp Max. axle length wheel set:26450mm Min. axle length wheel set:500mm Speeds / ranges: 2100Rpm Number of slides: 2 Length: 3500mm Width: 2000mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2009, Suitable for automatic cutting and surface grinding of hard metal and HSS rods with high precision for standard and special solutions Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel Automatic fire extinguishing system Kraft & Bauer FB 703, Length positioning freely programmable, Control system Siemens Simatic HMI, Preparation for connection to central coolant system. Workpiece diameter with loading magazine: 3 - 20 mm Workpiece length without loading magazine: 3-32mm Workpiece length with loading magazine: 3-350mm Workpiece length without loading magazines: 1-450mm Spindle speed grinding spindle: 2000 rpm, Bodpfx Amswd Ha Sjgslp mass: approx. 1,700 kg weight: approx. 1,700 kg Dimensions L x W x H: 1900 x 1200 x 2400 mm colour: Gray

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Tool24 PickOne Goods dispensing system with an innovative drum system to ensure secure individual retrieval of each item. Very fast goods retrieval due to short access times, a self-opening compartment, and an optical signal at the correct retrieval compartment. The drum of the Tool24 PickOne is available with up to 4 different compartment sizes as a standard configuration and, with a load-bearing capacity of over 1000 kg, is specifically designed for industrial use. Flexible mounting of a touchscreen thanks to perforated panels installed on both sides. The master system can be expanded as needed with additional expansion systems and combined with all Tool24 hardware variants. Bledpfxezuwvcs Amgop The Tool24 PickOne – master system is a state-of-the-art goods dispensing system that was specifically developed for industrial use. It combines the functions of a tool magazine with the security and efficiency of an automated tool cabinet.

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Bledex T Ah Dopfx Amgjp Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Year of construction: 2009, condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Drive power grinding spindle: 4.0 kW Bjdpfx Amouxc Dhsgelp Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm

Year of construction: 2009, condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm Bljdpfxsuxczaj Amgop workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Drive power grinding spindle: 4.0 kW Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm

Condition: used, used good condition low mileage cleaned functionality tested Manufacturer: Hoffmann Model: MU X-line Stop for stub tenon Stop for miter cut New price approx.: 1900.00 Blodez Np Ixspfx Amgep Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Year of construction: 2009, condition: used, KSS/filter/cooling systems Emulsion * Bledpfjw Tbnuex Amgep

Condition: used, Year of construction: 1989, with many drills used, top condition Machine cleaned, partially overhauled, lubricated, made operational, test run performed. Make: Hoffmann Type: DB 23 Year of manufacture: 1989 Machine no.: 169 Number of spindles: 23 units Number of boring beams: 1 Spindle pitch / grid: 32 mm Drilling from below, stroke: 60 mm Stop rulers with central adjustment Working width: 704 mm (1080 mm with portal clearance) Drilling depth: 70 mm horizontal Drill holder: M 10 / Taper 30° Space requirement approx. 1300 mm x 1000 mm x 1300 mm Weight: approx. 500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, Bodpfx Amovyurcegjlp without warranty or guarantee.

Condition: used, empty load weight: 4,050 kg, maximum load weight: 13,950 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2001, total length: 9,500 mm, total width: 2,520 mm, total height: 1,390 mm, suspension: air, tire size: 385/65R22,5, mileage: 1,001 km, gearing type: other, front tire size: 385/65R22,5, driver cabin: other, Vehicle location: Bovenden, 2 axles, BPW axles, turntable, air suspension Blsdpfx Aoi Rpfwjmgjp Tire size 385/65R22.5 - 80% tread remaining, drum brakes. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: used, empty load weight: 2,500 kg, maximum load weight: 7,500 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 10/2001, loading space length: 4,550 mm, loading space width: 2,200 mm, loading space height: 500 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, tandem, leaf springs, lashing eyes, U-protection, front support, rear support, swing flaps Construction: 3-way tipping trailer with loading ramps, steel side walls swinging and foldable, GFA axles, drum brakes! Bodomu Rfrjpfx Amgslp Loading ramps available for an additional charge of €1,000.00 net! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .