Used Hole Punching Machine for sale (65,713)

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Dwsdpfx Apsrtrx Rs Ioc Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 38,149 h, controller model: Bosch MTX compact, laser power: 4,000 W, punching force: 22 t, sheet thickness (max.): 8 mm, Includes SheetMaster & GripMaster! TECHNICAL DETAILS Laser power: approx. 4,000 W Punching force: max. 220 kN Sheet thickness: max. approx. 8 mm Working area, laser operation (X × Y): approx. 2,540 × 1,280 mm Working area, punching operation (X × Y): approx. 2,540 × 1,370 mm MACHINE DETAILS Control system: Bosch MTX compact Djdjz Nn H Hopfx Ap Iowc Dimensions & Weight Footprint (L × W): approx. 7,950 × 6,700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA Operating hours: 38,797 h Beam on-time: 38,149 h EQUIPMENT Active dies SheetMaster GripMaster

Condition: repair required (used), functionality: not functional, Drilling machines for turned parts – TRIADE FIR-6 Defective – PLC controller missing. Dwjdpfx Apezmxf As Iec

Condition: good (used), Year of construction: 1986, functionality: fully functional, Machine Name - Benelli 1000 Tonne press Machine Model - Automatic transfer press PMT/3d/1000/5/1000P Dwjdpfxez Nhx As Ap Iec Y.O.M 1986 (Retro-fitted 2015 by Helm) Description - 1000 ton SPM up to 26 Number of operational positions: 5 Press bed 5000mm x 2000mm Main carriage 5100mm x 1400mm second carriage Lateral opening between columns: 2500 mm Voltage power supply: 415V; 50 Hz Shut height range 730mm- 1070 Light guards Schlechier decolier : Coils up to 10ton and 1.2m wide, ID 500mm OD 1500mm Can be seen underpower from site.

Year of construction: 2008, condition: ready for operation (used), We are offering this ready-to-use Roll-o-Matic roller die-cutting machine, roller size 0.932/3000, manufactured in 2008. Usable roller width: 3000 mm. The upper roller has a diameter of 320 mm and is equipped with a PA or cast nylon cutting sleeve. The roller gap can be adjusted independently on both sides and is equipped with an absolute value display for the roller gap. Operating modes: setup operation; semi-automatic operation; fully automatic operation with a light barrier and time control. Includes 5 conveyor belts, a counter, and additional equipment: support rollers for the lower roller to reduce deflection under high load. Chain drive and more powerful motor. Includes control buttons on both sides. If you have any questions or require more information, please send us a message or call us. Dedpfjz Ag Ukox Ap Ijwc

Condition: used, Year of construction: 2007, Machine No. 78, control system, manufacturer Boschert, tool quick-change system, manufacturer Trumpf, punching force: 3 x 280 kN, station 1 Trumpf system tool size 3 (105 mm) with spray device, station 2 Trumpf system tool size 3 (105 mm), freely indexable rotation, station 3 Trumpf system tool/Boschert Revotool size 3 (105 mm), including Revotool 8-position tool holder, travel distances X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm, punching arm overhang 1,730 mm, sheet thickness max.: 6 mm (clamp opening), stroke height max.: 90 mm, programmable in increments upwards and downwards, punching slug extraction, ball bearings in the machine table Table width left + right: 3,200 mm each, table depth: 2,810 mm, table height: 900 mm, overall width: 6,482 mm, overall depth: 4,600 mm, overall height: 2,110 mm; with workshop cart, manufacturer KS Tools, 7 drawers, contents: various hand tools. Dwedpez Dv Tvofx Ap Isc

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 070691, control type: CNC control, actuation type: mechanical, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, table length: 2,070 mm, table width: 1,280 mm, overall weight: 8,000 kg, power: 14 kW (19.03 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine (with Multitool) For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1998. Well maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070691 Year of manufacture: 1998 Max. punching force: 165 kN Machine weight: 8,000 kg Power supply: 220V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling, cassettes, and Multitool. For reference, the standard specifications for this model are: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email. We will be happy to answer any questions and provide further photos or videos of the machine in operation. Dwedpez E Sa Isfx Ap Ijc

Year of construction: 2002, condition: excellent (used), functionality: fully functional, BOGRAMA Punching Machine – Multi BSM 450/220/15 - Manufacturer: BOGRAMA AG, Switzerland - Type: BSM 450/220/15 - Year of Manufacture: 2002 - Machine No.: 038/02 Dedpfxoz I Ug Ae Ap Iewc - Working Width: max. 450 mm - Performance: up to approx. 12,500 cycles/hour (depending on material and format) - Punching/Cutting Thickness: - Hole perforation: up to approx. 2 mm - Binder hole: up to approx. 5 mm - Cutting: up to approx. 5 mm - Strip steel cutting: material-dependent - Sheet Alignment: pneumatic front and side guides - Cycle Control: via photocell - Compressed Air Connection: 6 bar - Electrical Connection: 3 × 400 V / N / PE, 50/60 Hz - Fuse: 32 A - Applications: Punching, cutting, perforating, and hole punching

Condition: excellent (used), functionality: fully functional, punching force: 110 t, Geka punching machine model Puma 110/E-500, punching power 110tm, hole capacity diameter 40 x20, neckline 500mm, in good condition and very equipped. Dsdpfxevdkpre Ap Ijwc

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 5135, EUROMAC STX FLEX 6 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2018 Dwedoz Aarcepfx Ap Iec - Serial number: 5135 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: good (used), Year of construction: 2005, functionality: fully functional, power: 3.73 kW (5.07 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 35 t, operating speed: 5 mm/s, table width: 510 mm, table length: 1,000 mm, total length: 1,690 mm, total width: 1,490 mm, total height: 1,870 mm, overall weight: 1,750 kg, Hydraulic punching machine with 5 stops and Trumpf-type tooling. Dwsdpfxszt Ih Ho Ap Ioc

Condition: good (used), functionality: fully functional, Geka punching machine model Puma 150/ ,punching power 150tm,hole capacity diameter 40 x28,neckline 750mm, in good condition. Dwodpfx Aport Rrze Isc

Condition: refurbished (used), Year of construction: 2017, BUCK TBFZ 3000 CNC incl. tools and clamping wedges The machine has been comprehensively overhauled and modernized. Conversion to Heidenhain iTNC530 including completely new control cabinet Travel: X-3000 mm, Y-1.500 mm, Z-1500 mm Z1: 500 mm A-axis: +/- 20° Depth of drilling in a single pass Z: 1.500 mm Drill depth by readjusting Z1: 2.000 mm Drilling performance with single-lip internal thread drilling tools: 3-40 mm diameter NC rotary table 360° B-axis: 2.500 x 2.300 mm max. Tischladung: 25.000 kg Internal coolant supply (IKZ): 70/100 bar Spindle drive power at 60%: 20.5 kW Express travel X/Y/Z: 15.000 mm/min Spindle speed: 0-6,000 RPM Control: Heidenhain iTNC530 tool holder: SK50 Space requirements: approx. 8.5 m x 8.5 m x 3.5 m machine weight: approx. 24,000 kg max. table load: 25.000 kg Dwsdjz Ntr Iepfx Ap Ioc

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Dwodpfozxqz Tjx Ap Ioc Kurs Değeri: 80-360 Used machine

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Clear text display Press force monitoring Wire straightening device Bosch stripping devices Mounting and brush motor with integrated tool W32/1-32 Soundproof cabin Barrel for CU wire with stamped parts Control cabinet Technical data: Drive power: 7.5 kW Speed (min. - max.): 40 - 250 rpm Press force / stamping unit: 200 kN Longitudinal feed: 250 mm Strip width (longitudinal): 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm More items – new and used – can be found in our shop! International shipping costs available upon request! Dwedsh I Nrqspfx Ap Ijc

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged Dwsdpfx Apezu Ryhs Ijc - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: used, Year of construction: 1994, Product information "Boschert Hydraulic CNC Punching Machine" Type / Model: Boschert EL 750 digital Condition: Used Year of manufacture: 1994 Technical data Working area & dimensions Dwodpfx Aezp Raqop Iec Overhang (Y-axis): 750 mm Travel range (X-axis): 1500 mm Max. sheet size (without repositioning): 720 x 1700 mm Performance data & capacity Max. hydraulic punching force: Standard 280 kN Max. sheet thickness*: up to 12.7 mm Max. punching diameter: Ø 105 mm Stroke rate: max. 100 strokes/min Tooling: Original Trumpf® tool system Positioning accuracy with 2-axis digital display: ± 0.1 mm Connection power: 4 kVA Control voltage: 220 V Required fuse rating: 3 x 16 A Installation dimensions (W x D x H): approx. 3400 mm x 1580 mm x 1600 mm Weight: approx. 3400 kg Equipment - includes various tools / accessories * Material-dependent, usually designed for thin sheet metal up to 6 mm at full diameter or any shape that fits into a circle of Ø 105 mm Inquiry item: Transportation costs in individual offer.

Year of construction: 1986, condition: ready for operation (used), We offer this ready for use K. Widmann 0271E.20 Punched pockets machine, year of construction 1986. Control voltage: 220 V Frequency: 50 Hz Operating voltage: 380 V Serial number: 89024E011 Circuit diagram number: A If you have any questions or need more information, feel free to send us a message or give us a call. Djdpfxsz Akq No Ap Ijwc

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Dsdpfx Apjztyxde Ijwc Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Year of manufacture: 1995 Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Drilling bar with 15 spindles, spacing 32 mm Indexing system, manual, with stop guides Drilling length max. 480 mm Dedpfx Ajz H Dwnsp Iowc Motor 2.2 kW - 2800 rpm Drill chuck 10 mm with clamping surface Operating pressure 6 bar Weight: approx. 220 kg Availability: short-term Location: Flörsheim

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Dwedjzdf Utjpfx Ap Ioc Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm Djdpfx Apezk N S Uj Iowc - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 4789, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2016 - Serial number: 4789 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request. Dsdsz Aalvjpfx Ap Iswc

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HT-120T, total height: 1,990 mm, total width: 800 mm, total length: 1,600 mm, pressing force: 90 t, stroke length: 80 mm, overall weight: 1,500 kg, DGUV certified until: 09/2026, Digima HT-120T 900 kN punching machine Professional hydraulic machine for punching, notching, bending, and processing steel components. The HT-120T is a high-performance hydraulic punching machine designed for intensive use in manufacturing plants, blacksmith shops, structural engineering facilities, and workshops engaged in metalworking. The machine allows for punching holes in sheets, flat bars, tubes, and profiles, as well as notching tubes, bending steel components, processing corners, and preparing parts for further assembly or production. Tube Notching The machine enables notching tubes and preparing them for further joining or assembly. Punching Holes in Tubes The HT-120T allows for punching holes in tubular elements and steel profiles. Bending Flat Bars With the appropriate tool, the machine can operate as a press for bending flat elements. Bending Angle Bars The device supports the processing of angle bars and the preparation of structural components. Processing Radius Corners The machine enables shaping corners and producing repeatable elements with a specified radius. Punching in Plates The HT-120T allows for punching round, oblong, and other shapes in steel plates and sheets. Punching in Profiles The machine is suitable for punching in angle bars, profiles, and structural components. Dwedpjz Arrusfx Ap Isc Rounding Corners The device allows for processing the corners of parts, improving their aesthetics and preparing them for assembly. Double-Sided Edge Rounding The HT-120T enables processing edges and rounding components on both sides, depending on the tooling used. Technical Specifications: Model: HT-120T Maximum punching thickness: 20mm Maximum punching diameter: 30mm Pressing force: 900kN Throat depth: 350mm Maximum stroke: 80mm Number of strokes: 8-20 strokes/min Motor power: 5.5kW Overall dimensions: 1600x800x1990mm Machine weight: 1500kg HS Code: 8462490000

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Dwodezr Ha Espfx Ap Ioc Year of manufacture: 2007