Used Horizontal Cold Header for sale (8,095)

Condition: used, functionality: fully functional, machine/vehicle number: 90485094, Year of construction: 2015, operating hours: 5,810 h, load capacity: 2,500 kg, fuel type: electric, fork length: 2,400 mm, empty load weight: 950 kg, drive type: Elektro, Low-lift pallet truck Hfedpfoz Ecvasx Ak Uon Chassis number: 90485094 Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Battery type: PzS Battery year of manufacture: 2016 Description: Jungheinrich ECE 225 - Horizontal order picker, No.: R0832, Year of manufacture: 2016, Battery year of manufacture: 2016, Operating hours: 5,810, Fork length: 2400 mm. The device is in normal visual condition and in good technical condition. Fast and uncomplicated transport possible by arrangement! This advertisement serves only to identify the device! A detailed description of the condition and possible features will be provided individually upon request! Errors and prior sale reserved, sale only to commercial businesses. Every sale of used goods is made with the exclusion of any warranty or guarantee. If you have not found your forklift, please contact us. We have a large selection of other equipment in stock.

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, manufactured in 1996, for sale. Model designation: SH-50 Serial number: 450 Sale and collection: Sales are exclusively within the EU. Due to the high administrative effort and lack of experience with export processing, we cannot offer sales and deliveries to countries outside the EU. Collection, loading, packaging, and transport are the responsibility of the buyer and at their expense. The machine is still powered and available for immediate collection. • P8 power supply, with a value of 1500, was replaced in August 2024. • The spindle was repaired in 2017 and has since mainly been used for single-shift operation, as we primarily manufacture individual parts and small series. Therefore, the machine has mostly been used for setup work. • Machine: Mori Seiki SH50 milling machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Design: Horizontal milling machine with indexing table • Tools: 60 (BT40) • Number of pallets: 2 (500mm*500mm) • Travel ranges: X630mm Y600mm Z650mm • Spindle speed: Milling spindle 12000 rpm • Chip conveyor Known defects: The rapid traverse speed of the X-axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring is likely damaged during pallet changes, resulting in oil leakage. We have temporarily resolved this by installing a ball valve in between; we only need to open this when we change pallets, which we do not do very often. The machine is sold as inspected, without any warranty or guarantee. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. The magazine loses its reference point after being shut down for a longer period. The procedure for restoring it is known. Hfedpfx Aksyt Nnps Ujn If you have any questions or require further information, please do not hesitate to contact us.

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 61300 € 1158.57 € Doppelsäulenführung 6000 x 41 x 1,3 mm 20 - 100 m/min 560 mm 560 mm 600 x 560 mm 810 mm 2.2 kW 5.5 kW 0.12 kW 3250 mm 2200 mm 2350 mm 4500 kg Hydromechanical band tension Continuously variable bandspeed (inverter) Linear guide Feed vice with servo drive with 700 mm stroke or 9.999 mm for multi-stroke Control panel with touchscreen (50 cutting lengths / 30 programs) Planetary gearbox Saw pressure adjustment Band deflection sensor Coolant device Chip brush Optical height adjustment OPTIONEN: Hydraulicupper clamping Hodpfx Akoynmy So Uofn Micro cooling unit Roller table3 m Laser cutting line

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 46700 € 891.97 € Doppelsäulenführung 8200x41x1,3 mm 20-100 m/min 810 mm 750 mm 910x750 mm rund 600 mm, quadrat 600 Hodpfxsynm Rke Ak Uefn rund 360 mm, quadrat 360 725 mm 4 kW 0.12 kW 4020 mm 1600 mm 2450 mm 3970 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH OPTIONS: Hydraulic vertical clamping Micro cooling unit Laser liner

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 9080 € 175.24 € Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 300 mm 240 mm 420x200 mm rund 240 mm, quadrat 230 rund 170 mm, quadrat 170 830 mm 1600 mm 1400 mm 1950 mm 356 kg Hfedpfx Akoynm Szj Uon manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Hfodpfox Sq Uvex Ak Uen Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 23800 € 456.96 € Doppelsäulenführung 5200x41x1,3 mm 20-100 m/min 460 mm 460 mm 650x460 mm rund 380 mm, quadrat 380 590 mm 0.55 kW 4 kW 0.12 kW 3100 mm 1000 mm 1800 mm 1520 kg blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way material limit shaft height adjustment pressure adjustment coolant pump saw blade security switch gearbox 1,2 meter roller table user manual in GERMAN or ENGLISH Hfjdpfxowiql Nj Ak Uon OPTION: turn table for mitre cuts hydraulic top clamping from above

Condition: new, Year of construction: 2024, neu 2024 6254 prompt, Zwischenverkauf v Italien 15040 € 288.77 € 1 Doppelsäulenführung 3270x27x0,9 mm 40/80 m/min 300 mm 300 mm 350x260 mm rund 210 mm, quadrat 210 rund 110 mm, quadrat 110 830 mm 1.5 kW 1500 mm 1600 mm 1900 mm 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder Hfsdpfxewiqndo Ak Usn fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Manufacturer warranty until 31.12.2026 OPTIONS: Roller tables and band saw blades on request

Condition: new, Year of construction: 2026, neu 2026 060216 prompt, Zwischenverkauf v Türkei 20700 € 397.44 € 1 Schwenkrahmen 5200x34x1,1 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 410 mm, quadrat 410 rund 320 mm, quadrat 250 rund 410 mm, quadrat 410 rund 320 mm, quadrat 285 860 mm 0.55 kW 3 kW 0.12 kW 2800 mm 1210 mm 1870 mm 1540 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH Hjdpfewiqtyex Ak Uofn OPTIONS: Roller tables and band saw blades on request

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 9400 € 181.42 € Hfodpjwiqw Eefx Ak Uen Schwenkrahmen 2730x27x0,9 mm 35-70 m/min 230 mm 230 mm 240x230 mm 590 mm 0.37 kW 1.3 kW 0.12 kW 1700 mm 800 mm 1500 mm 530 kg blade brush control panel height adjustment switch hydromechanical blade tension inverter mechanic top clamping material length stop coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 11100 € 213.12 € Schwenkrahmen 3660x27x0,9 mm 20-100 m/min 320 mm Hodpfowirhfsx Ak Usfn 300 mm 320x300 mm 640 mm 0.37 kW 2.2 kW 0.12 kW 1900 mm 850 mm 1300 mm 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH

Condition: new, neu ca. 10 Wochen ab Auftrags Hsdpfx Aowirpvsk Ujfn Italien 8680 € 167.52 € Schwenkrahmen 3120x27x0,9 mm 35/70 m/min 280 mm 240 mm 370x140 mm rund 225 mm, quadrat 215 rund 140 mm, quadrat 140 830 mm 1550 mm 1400 mm 1900 mm 353 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: used, Sheet lifter - Sheet clamp - Universal lifter Carrying clamp, beam clamp, lifting tackle for horizontal sheet transport Lifting gear for horizontal sheet transport DOLEZYCH type Dolast K15 Year of manufacture: 1997 Load capacity per clamp: 3 t Hfodpfxjxciwzj Ak Uon Maximum load capacity: 6 t (for the twin lifting tackle) Clamping range: 0–51 mm Sheet thickness: 4–50 mm Wire rope length: 1.5 metres - Two-leg wire rope sling with eye - 2 lifting clamps included Own weight approx. 45 kg The lifting gear is suitable for lifting single steel plates or bundled sheet packs. Price quoted per lifting gear, 2 units available.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm Hfsdpfx Aksd Iipze Ujn table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 + 70 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m Hfjdpfjd Iip Njx Ak Usn ATTENTION SPECIAL PRICE!!! Double miter metal band saw with: - Belt speed 35 + 70 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling

Condition: used, Year of construction: 1990, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm Hfedpowvl E Rofx Ak Uen capacity 60 degrees: flat 90 x 95 mm cutting speed 15 - 90 m/min total power requirement 2,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Machine base

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Hfjdpjywicvsfx Ak Uen

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based Hjdpefg E Hysfx Ak Uofn E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW Hodjfg E H Eepfx Ak Usfn weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm Hfsdpefg Rlbefx Ak Ujn capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Hfsdpfx Asfg Rlcsk Uon Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: new, 330 mm 330 mm 400x330 mm saw band length 4570 x 34 x 1,1 mm table height 800 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 2,35 t dimensions 2,23 x 2,15 x 1,8 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length Hfodpefb Nbgjfx Ak Uen and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW Hsdofgpdljpfx Ak Uofn weight of the machine ca. 0,38 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m Hfedpfx Akefg E Hls Uen ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, Model Name Hfodpfxsl Sva Io Ak Uen SHARK 331-1 NC 5.0 SPIDER