Used Horizontal for sale (6,492)

Condition: used, Year of construction: 2017, Operating hours: 51,800 h Program run hours: 15,100 h Technical Data: Travel paths/axes X = 800 mm Y = 850 mm Z = 1,050 mm B = 360°, 0.001° Max. spindle speed: 12,000 rpm Total connected load: 77 kVA Required space, LxWxH: 9,000 x 5,500 x 4,000 mm Weight: 18,100 kg Equipment: - Siemens 840D - Electronic handwheel - Heavy-duty machining package - Tool changer, rotary magazine with 180 places - Tool holder HSK 100 - Operator control panel - Internal coolant supply Cjdpsxqp Ivefx Aktjri - Measurement and monitoring: Renishaw, infrared TDS, MPC

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Csdpfjxm Sxvsx Akteri Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: new, square edge steel 20x20 / 25x25 mm flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance "cold" : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm - - - - - Bending capacity "hot" : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm Codpfjxcuyhsx Akteri - - - - - Scope of delivery - Bending plate - Angle stop stepless - Clamping block with eccentric clamp - Material stop

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 20960 € 402.43 € 40 to 250 mm 200 x 20 mm 1100 x 620 mm 55 mm 4,7 - 9,1 mm/s 45 mm/s Cjdpfsxh Rulex Aktjri 45 l 3 kW 950 mm 1250 mm 900 mm 1000 mm 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Crodpfjw U Uh Djx Aktei Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Year of construction: 2007, condition: excellent (used), Horizontal glass washing machine TRIULZI SY 2600 6.3.6 Year of production: 2007 Maximum working width: 2600 mm Minimum glass size: 180 x 250 mm Glass thickness: 2 - 35 mm Working speed: 2 - 8 m/min (by inverter) Washing machine consists of: Csdpfxox Ecwms Aktsri - inlet conveyor approx. 1000 mm long, - pre-washing, - 3 pairs of brushes (6 pcs.), - 3 pairs of air drying knifes (6 pcs.), - 3 water tanks (two with heating), - outlet conveyor approx. 1400 mm long. Total length approx.: 6900 mm Very good and clean condition As is Available immediately

Condition: used, Model: SH75 Serial No: 7076 Capacities: Rotary Table Size: 1000 x 1000mm Maximum Table Load: 2000kg Vertical Traverse: 1000mm Cross Traverse: 1245mm Longitudinal Traverse: 1000mm Spindle Diameter: 75mm Spindle Traverse: 508mm Spindle Speeds: 5.6- 1120 rpm Spindle Taper: 40 int Facing Head Diameter: 508mm Facing Slide Traverse: 180mm Facing Head Speeds: 5.6 – 280rpm Feeds, X, Y & Z: 0.75 – 2500mm/min Feeds, Spindle & Face: 0.25 – 830mm Screw Cutting to Table: 2 – 10mm Pitch, 4 – 16 TPI Motor: 7.5kw Crodpfx Aozrm T Eektji Electrics: 415v, 3ph, 50 Cycles Complete with: Screw Cutting, 3 Axis DRO, Steel Telescopic Guards, Operator Safety Guard, Pendent Control, Power Draw Bar, Safety Brake, Facing Head Lock, Spindle Support Bearing, Facing Slide Tool Holder Selection of Spindle Tool Holders, Lovo Light Approximate Dimensions: 4200 x 2940 x 2950mm Approximate Weight: 10,500kg

Condition: used, Year of construction: 1996, cutting diameter 460 mm saw band length 8350 x 41 x 1,3 mm mm cutting width 1660 mm total power requirement 30 kW weight of the machine ca. 21.900 kg KASTO BBS 460/1660 2 identical machines (same photos; the other machine was built in 1996) Manufacturer: KASTO Maschinenbau GmbH & Co. KG Address: Industriestr. 14, D-77856 Achern-Gamshurst, Germany Type: BBS 460/1660 (Block Band Saw / Horizontal Bandsaw) Series: 101 Machine No.: 6319 101 004 Year of Manufacture: 1996 DIMENSIONS & WEIGHT Weight: 21.900 kg (data card) / approx. 17,700 kg (foundation plan) Material Support Height: 1,550 mm Machine Footprint (L x W x H): approx. 1.24 × 3.28 × 3.49 m Minimum Installation Space (with accessories/options): approx. 20.19 × 10.67 × 3.95 m Cutting Range (at 90°) Round Material: Ø 460 mm Flat / Block Material: 1,660 × 460 mm SAW BLADE Standard Sizes: 8,350 × 54 × 1.3 mm or 8,350 × 41 × 1.3 mm Alternative (per data card): 8,350 × 54 × 1.3 mm Kerf Width (Set): approx. 2.4 mm Band Wheels: 3 × Ø 350 mm Recommended Quality: Super Bi-Metal Saw Blades (M42) for mild steels, high-alloy tool steels, and stainless steels For extremely hard materials: Carbide-tipped blades PERFORMANCE DATA Roller conveyor load capacity: 20,000 kg Band Speed: infinitely variable 14 – 75 m/min Feed Rate (Step Feed): infinitely variable 0.7 – 220 m/min Credpezmy Sqofx Aktji Electrical Connection: 400 V / 50 Hz / 30 kW (total connected load) Coolant Capacity: 6.5 l Noise Level: 73 dB(A) Function Manufacturer Type Power (kW) / Current (A) Speed (rpm) ----- Saw Motor Sieber VM6-1054/750/4 7.5 kW / 15.6 A 1500 Hydraulic Motor BauKnecht DT90-S4F 1.1 kW / 3.0 A 1500 Hydraulic Power Unit Rexroth UL 205S2016294/1 2.2 kW / 5.6 A 1500 Roller Track Motor SEW KG 35 1.2/4.8 kW / 4.6/10 A 750/3000 Band Speed Motor SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Rapid Traverse (Eilgang) SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Adjustment Motor Sieber DE26.18 kW / 0.6 A 3000 Coolant Pump Brinkmann TS12/190-65 0.27 kW / 0.63 A 3000 Coolant Pump Brinkmann TB 100/270 0.24 kW / 0.44 A 3000 Chip Conveyor Pump Huber + Moser 693/8F 0.08 kW / 0.65 A 750 Chip Conveyor SEW SA 42 DT 71 DB 0.12 kW / 0.69 A 750

Condition: used, functionality: unexamined, Ferwood Code: AGG0215 - Manufacturer Code: 2-017-95-5550 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - WEEKE - If interested, we offer a reconditioning service; please contact us. Credpfx Aszmht Asktoi

Condition: used, Year of construction: 2005, cutting diameter 230 mm cutting speed 35 - 70 m/min cutting width 260 x 200 mm saw band length 2720 x 27 x 0,9 mm total power requirement 1,1 kW weight of the machine ca. 0,68 t Csdpfx Aoy N D Nbokteri dimensions of the machine ca. 1,8 x 1,8 x 1,6 m

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Control Siemens Crjdoy Umizspfx Aktoi max. workpiece diameter 80 mm total power requirement 3,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Condition: good (used), Year of construction: 2009, machine/vehicle number: 60227, Offer 26293 Hydraulic Horizontal – Two-Column Miter Bandsaw Machine Technical data: - Automatic operation for the cutting process, hydraulic lifting and lowering of the saw frame - Manual miter adjustment to the left and right with clamping - Saw band dimensions 4400 x 34 x 1.1 mm - Cutting speed, continuously adjustable 15 - 150 m/min - Cutting pressure regulation, continuously adjustable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range: - at 90°: round 335 mm - at 90°: square/rectangular 500 x 335 mm - at 45°: round 330 mm - at 45°: square 320 x 335 mm - at 30°: square 170 x 335 mm - Miter adjustment with digital angle display - Outfeed roller conveyor with dimension stop 6000 mm - Infeed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 1500 x H 1850 x D 2100 mm - Weight approx. 1500 kg Cjdpfozz Rblex Akteri

Year of construction: 2026, condition: new, The 3500L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304SS stainless steel. - Capacity: 3500L - Motor: 15kW, 3-phase, 50Hz - Machine weight: 1300kg - Machine dimensions: (L: 3350 x W: 1410 x H: 2350mm) - Mixers available from 400L to 3500L The mixer's interior and ribbon itself are highly polished, significantly simplifying and accelerating mixing and facilitating cleaning after use. Csdjzuxv Rspfx Aktjri These mixers are used for mixing bulk materials. They are primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Condition: used, functionality: fully functional, 1. Machine specifications * Pallet changer with 6 pallets - Clamping area: 4 x 800 x 800 mm 2 x 800 x 1000 mm - Max. clamping weight: 2000 kg - Interference circle: D = 1200 mm - Changeover time: 35 sec. * Travel ranges - Workpiece (x): 1140 mm - Support vertical adjustment (y): 910 mm - Column transverse adjustment (z): 875 mm * Max. feed force: 20,000 N * Rapid traverse: 24 m/min * Working spindle - tool holder - SK 50 DIN - Drive power 100/40 % duty cycle: 22/32 kW - Torque 100/40 % duty cycle: 720/1040 Nm - Speed range, stepless: 20 ... 6000 rpm * Coolant supply through the spindle center: 10 bar * Tool magazine (cassette): 186 positions - Average chip-to-chip time: 11 sec. Codpoz H Tqdsfx Aktsri * Control system: Siemens 840C * Work area protection 2. Year of manufacture: 1995 The machine was only used in production until February 2011!!! 3. Warranty: none 4. Prices: * Machine: €30,000.00 5. Delivery conditions: * Payment terms: 100% before collection * Delivery date: ex-stock

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment Crsdpoh Dy Rfsfx Aktoi

Condition: new, Model Name Cedpjgvkafofx Aktsri Shark 332-1 SXI evo

Condition: new, Model Name Cjdpfx Akjgvkbcjteri Shark 282 CCS

Condition: new, Model Name Csdpfsgvkctjx Aktori Shark 282 SXI evo

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 915 mm band speed 35/70 m/min capacity 90 degrees: round 185 mm capacity 90 degrees: square 150 mm capacity 90 degrees: flat 220 x 150 mm connected load frequency 400 V total power requirement 0,8 kW Csdpfx Aohpktrokteri weight of the machine ca. 195 kg dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet

Condition: new, cutting diameter 240 mm dimensions of saw-band 2730 x 27 x 0,9 mm table height 920 mm cutting speed 35 + 70 m/min 240 mm stroke back stop 230 mm cross-slide 270x230 210 Impact energy 200 Air consume per blow 200x210 130 mm 130 mm 130x160 mm total power requirement 1,2 kW weight of the machine ca. 0,26 t dimensions of the machine ca. 0,9 x 1,6 x 1,74 m • miter left 60° • Quick-release vise with quick-release device a. • Quick release lever for easy handling • Frame and gear made from one piece, very quiet cut and very low vibration • Electrical monitoring of band tension and band breakage, saw band cover. • Carbide saw band guide • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw frame lowering via the hydraulic Cylinder, continuously adjustable feed, with limit switch Crjdpfjd Iip Ssx Aktji at the end of the cut. Rapid lowering of the saw frame from the rest position to the workpiece, then toggle to normal saw feed (e.g. for scribing). Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for notching). Through the brake cylinder the saw can be positioned in any position during the return stroke.

Condition: used, Year of construction: 2010, honing diameter 54 mm stroke 99999 mm centre height 9999 mm Crsdpfxsvk Nkue Aktji Control FANUC CNC Ball and spherical honing machine

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, rotational speed (max.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 100 h, coolant supply: 70 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 4-position pallet changer and 180 magazine slots Year of manufacture: 2007 Control system: Sinumerik 840D Technical data: Spindle speed: 0-18,000 rpm Drive power: 35 kW Torque: Spindle connection: HSK 63 Number of magazine slots: 180 Number of pallets: 2 Credox Dlgnjpfx Aktei Pallet size: 500x500 mm Travel distances: X-axis: 630 mm Y-axis: 800 mm Z-axis: 650 mm C-axis: 0.001° All axes have linear drives Accessories: -Coolant system -Chip conveyor The machine has been regularly maintained. It is still very accurate! More pictures will follow. Video available upon request.

Condition: new, functionality: fully functional, Year of construction: 2023, - In stock, unit is available! - The Rotection flowpack machine is suitable for packaging various products. A large operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Model designation: Rotection tubular bag machine Operating display: 6.8" display Drives: Servo Packing length: 40-400mm Packaging width: 35-160 mm (depending on film width) Packing height: dependent on form shoulder Speed: 80-100 bags/min. in continuous operation Speed: up to 70 bags/min. Intermittently Film width: 90-400 mm Power consumption: 5 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 400 kg System dimensions: approx. 4000 x 930 x 1370 mm Error rate: < 5% Cjdsinwi Hepfx Akteri *The above information refers to the model: RMFP70. This is a horizontal packaging machine. In the picture gallery you will find various models from our range of systems. Of course we offer you state of the art Box-Motion tubular bag systems. In order to be able to offer you the right packaging system for your requirements, our engineers are available to advise you. Of course, we will supply you with suitable mounting frames for the use of thermal transfer printers, or we will be happy to offer you a suitable system. We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 870 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Fanuc 16iMB, workpiece height (max.): 1,100 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 50, Equipment: chip conveyor, rotational speed infinitely variable, Specification Value Machine Type 4-Axis Horizontal Machining Center Pallet Size 500 x 500 mm Number of Pallets 2 (Automatic Pallet Changer) Table Load Capacity 800 kg X-Axis Travel 870 mm Y-Axis Travel 710 mm Z-Axis Travel 660 mm B-Axis 0.001° Indexing Spindle Speed 15,000 rpm Spindle Taper SK40 Gearbox Yes Spindle Type Gear Driven Spindle Motor Power Approx. 26 kW Rapid Traverse Rate 50 m/min Tool Magazine Capacity 50 Tools Tool-to-Tool Time Approx. 1.5 sec Crsdpfjy Uvlfex Aktji Maximum Tool Weight 20 kg Through Spindle Coolant Yes Chip Conveyor Included Machine Weight Approx. 20,000 kg Kitamura HX500i Alpha horizontal machining center in very good technical condition. Machine equipped with 15,000 rpm gearbox spindle, SK40 spindle taper, automatic pallet changer (2 pallets), chip conveyor, through-spindle coolant system and FANUC 16i-MB CNC control. Suitable for precision machining and demanding production applications.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller model: Fanuc 16iMB, workpiece height (max.): 745 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 50, tool weight: 10,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Specification Value Machine Type 4-Axis Horizontal Machining Center Pallet Size 400 x 400 mm Number of Pallets 2 (Automatic Pallet Changer) Table Load Capacity 400 kg X-Axis Travel 610 mm Y-Axis Travel 610 mm Z-Axis Travel 610 mm B-Axis 0.001° Indexing Spindle Speed 20,000 rpm Spindle Taper SK40 Gearbox Yes Spindle Motor Power Approx. 22 kW Rapid Traverse Rate 60 m/min Tool Magazine Capacity 50 Tools Tool-to-Tool Time Approx. 1.3 sec Maximum Tool Weight 10 kg Coolant Through Spindle Yes Chip Conveyor Included Machine Weight Approx. 10,000 kg Cjdjy Uvhgepfx Aktjri Kitamura Mycenter HX400iSII horizontal machining center in very good technical condition. Machine equipped with high-speed 20,000 rpm spindle, gearbox, automatic pallet changer (2 pallets), chip conveyor, through-spindle coolant and FANUC 16i-MB control system. Suitable for high-precision and high-speed machining applications.