Used Hot Press Steam for sale (15,854)

Year of construction: 2024, condition: like new (used), functionality: fully functional, Stainless steel steam sterilization autoclave Pass-through autoclave, GXMQ-KK.13.8JS Model: STAU-26.3 Serial No.: G2310 Power: 11 kW Voltage: 380V/50Hz & 230V/50Hz Bwjdpoz Td Alofx Anpsw Operating pressure: +0.5 bar / -0.88 bar Weight: 20,000 kg Self-dismantling and removal included.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 2008, 3,160 operating hours, newly serviced, very well maintained, NEW HD pump by FALCH Bwjdpfowy Ellex Anpow

Condition: used, functionality: fully functional, For sale: an industrial Nilfisk ALTO SOLAR BOOSTER 7-58E18H high-pressure washer with electric water heating, 18 kW. This stationary unit is designed for cleaning machines, equipment, floors, and industrial fixtures. Technical specifications according to the nameplate: Manufacturer: Nilfisk ALTO Model: SOLAR BOOSTER 7-58E18H Product number: 107370270 Serial number: 3520122200419 Working pressure: 170 bar Bsdpfxe Ad Nkbs Anpeww Maximum permissible pressure: 250 bar Flow rate: 18.5 l/min – 1110 l/h Maximum temperature (according to nameplate): 85°C Electric heating power: 18 kW Total rated power: 25.5 kW Power supply: 400 V, three-phase, 50 Hz Rated current: 39 A Protection rating: IPX5 Weight: 155 kg Country of manufacture: Hungary Equipment visible in the photos: High-pressure hose Nilfisk high-pressure gun Spray lance Pressure gauge Water temperature adjustment Control panel with START/STOP buttons and a main switch The unit has an additional marking on the housing: “MAXIMAL 70 Grad,” indicating a temperature limit of 70°C. The unit is used and shows visible signs of wear.

Condition: used, Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Bwodpfx Aowtw E Dsnpsw

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Bwsdpfx Anjz E Nh Njpow Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: good (used), Well-maintained Falch Trail Jet 15 500 bar 490 operating hours Year of manufacture 2021 Hot water Regularly serviced by Falch Various accessories available as options Bwjdpfxjuvd N So Anpew

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Bodpezt N R Nefx Anpjww

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 44 kW (59.82 HP), input voltage: 400 V, input current: 68 A, table width: 2,250 mm, table length: 4,000 mm, OTT press – 4000x2250 mm working surface Programmable control, heated platens, Bsdpoz Rn Sfjfx Anpoww 8-cylinder hydraulic pressing system. Heated vertical working surface (can also be used horizontally). For sale in excellent technical condition!

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Power supply: 380V. Fast operation. Hydraulic power unit. Bwedpfsz S Utlex Anpow Format: 340 x 260 mm. Stack height: 820 mm. Adjustable pressing force, max. 2500 kg. Weight: 250 kg. Mounted on casters for easy movement.

Condition: like new (used), Falch Trail Jet 15, 06/2024, as new with warranty, 232 operating hours Bedpfowz Scaox Anpsww

Condition: like new (used), Year of construction: 2018, Dynajet 500th Pressure Washer Year of manufacture: 2018 Max. temperature range: 95°C Brand: Dynajet Mobile: yes Serial number: 62005720 Type: 500th Maximum working pressure: 500 bar With remote control; water tank 1000 l; unladen weight 1420 kg; approx. 30 m high-pressure hose; approx. 25 m filling hose; operating hours: 597 hours; tested and fully functional Bwjdpfoyigr Uex Anpow

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,200 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 970 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional Bjdpfx Ans Aacybspjww - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 300 - Ram width [mm]: 120 - Throat depth [mm]: 1000 - Pressing speed [mm/s]: 10 - Column spacing width [mm]: 1000 - Transport dimensions: 1200mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 1,500 mm, overall weight: 1,145 kg, No minimum price – guaranteed sale to the highest bidder! The press is in new condition and has not yet been used! TECHNICAL DETAILS Press force: 100 t Stroke: max. 380 mm Table width: 1,500 mm Height adjustment: 1,000 mm Ram speed: 10 mm/s Column spacing: 1,500 mm MACHINE DETAILS Bjdpfx Ano Af Hd Uspsww Press type: Single-acting Drive system: Conventional Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 2,100 mm Net weight: 1,145 kg Number of transport packages: 1 EQUIPMENT CE marking CE certificate Documentation

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,100 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 540 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 60 - Max. stroke [mm]: 380 Bsdpjz U U Dpsfx Anpsww - Table length [mm]: 1000 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Pressing speed [mm/s]: 10 - Options: Verplaatsbare cilinder - Column spacing width [mm]: 750 - Transport dimensions: 1200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Falch Trail Jet 15, 300 bar, 24 l/min, 305 operating hours Bedpewlkrujfx Anpjww

Condition: reconditioned (used), Year of construction: 2023, shaft length under head: 200 mm, drawing speed: 75 mm/s, disc diameter: 14 mm, 2-shot cold press. FIDE EF-180 For the production of long screws Range: Diam.14x200 mm. Ppm: 75 Bwedpfxsqagpxe Anpow Overhauled to new by HBR Ltd.

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: VAN18-0015, power: 995 kW (1,352.82 HP), EX Diageo 2017 BINDER / HERZ Biomass-Fired Steam Boiler Plant – Complete System Boiler capacity: 995 kW, as stated on the manufacturer’s nameplate. Complete industrial biomass steam generation plant available from Rosemaund Farm Distillery in Herefordshire, UK. Installed and commissioned in 2017 and formerly operated as part of the Chase Distillery site during its period of Diageo ownership. The plant is now surplus to requirements following a change in production strategy. The installation is offered substantially complete and includes: • BINDER / HERZ biomass-fired steam boiler plant • Hydraulic walking-floor fuel hopper • Screw and inclined fuel conveyors / auger stoking system • Economiser Bwodpoz Ik Aaefx Anpew • Flue gas and ash collection equipment • Ash removal conveyors and collection system • HERZ / BBSM plant control panel • Flue, fans and associated fittings • BYWORTH insulated steam accumulator, approx. 23m³ • Water treatment equipment • Steam blowdown vessel • Condensate recovery unit • Hotwell and associated pipework/platforms Boiler reference: VAN18-0015 Year: 2017 Steam accumulator: BYWORTH M847, 2018 The plant remains installed and can be inspected by appointment. An independent engineering inspection and functional test can be made available to serious purchasers. Sale basis: Ex-works, Herefordshire, United Kingdom. Purchaser to arrange dismantling, loading and transport. Full technical information, photographs and further documentation available on request.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MINVAP VPXpert K 10c, Manufacturer: Grabner Instruments Messtechnik GmbH - Type: MINVAP VPXpert K 10c - Year of manufacture: 2017 - Technical data: > Measured temperature range: 0 to 120°C (user programmable) > Temperature stability: ±0.01°C > Temperature profiles: single temperature, stepped, or ramp mode > Pressure range: 0 to 1000 kPa (0 to 145 psi) Bwedjxt H Hhopfx Anpow > Pressure resolution: 0.1 kPa > Pressure tolerance: 0.1 kPa > Vapor-liquid ratio: 0.02/1 to 100/1, adjustable per selected method > Power requirement: 90-264 V AC, 45-63 Hz, 200W (mains supply) > Field application DC/AC power converter: 12V / 200W > Dimensions (W x H x D): 253 x 368 x 277 mm (10 x 14.5 x 10.9 in) > Weight: 9 kg (20 lb) > Precision data: > Repeatability: ±0.3 kPa (0.04 psi) > Reproducibility: ±0.7 kPa (0.10 psi)

Condition: ready for operation (used), Year of construction: 2016, stroke length: 280 mm, total width: 3,050 mm, total height: 5,000 mm, product length (max.): 4,000 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-500 features a press capacity of 500 tons and a stroke length of 280 mm. It includes a slide area of 2800 x 1200 mm and a bolster area of 3000 x 1300 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-500 machine we have for sale. Contact us for further details. • Press capacity: 500 ton • Rated tonnage point above BDC: 7 mm • Strokes per minute: 30 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2800 x 1200 mm • Bolster area (L x W): 3000 x 1300 mm • Bolster thickness: 235 mm • Working height: 1300 mm • Side opening (W x H): 1200 x 700 mm • Main motor: AC 45 kW x 4 / VS 55 kW x 4 • Slide adjustment motor: 3.7 kW x 6 • Air pressure required: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Bwjdpfx Asz Sqiienpjw Technical Specification Stamping Force 5000 Kn

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Item for sale: 1x Lotus Press LTS 138 Condition: Bedpfx Ajzy U Uysnpeww This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 100,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm • Bolster area (L x W): 3000 x 1400 mm Bsdjz Sqf Ropfx Anpsww • Bolster thickness: 240 mm • Working height: 1300 mm • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm • Quantity available: 5 units • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Technical Specification Stamping Force 6000 Kn

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm Bedpfx Aozrpt Ujnpjww no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: ready for operation (used), Year of construction: 2011, stroke length: 280 mm, total width: 2,850 mm, total height: 4,800 mm, overall weight: 68,000 kg, product length (max.): 3,550 mm, Mechanical stamping press manufactured in 2011. This HIM HWAIL PRESS HCDS-400 features a press capacity of 400 tons and a stroke length of 280 mm. It includes a slide area of 2600 x 1100 mm and a bolster area of 2700 x 1200 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-400 machine we have for sale. Contact us for further details. • Press capacity: 400 ton • Rated tonnage point above B.D.C.: 7 mm • Strokes per minute: 35 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2600 x 1100 mm • Bolster area (L x W): 2700 x 1200 mm • Bolster thickness: 230 mm • Working height: 1200 mm Bjdpfxoz Stfye Anpeww • Side opening: 1100 x 700 mm • Main motor: AC 37 kW x 4 / VS 45 kW x 4 • Slide adjustment motor: 2.2 kW x 4 • Required air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Technical Specification Stamping Force 4000 Kn

Condition: used, machine/vehicle number: 008341, Max working length: 2480 mm Bjdpfxox A Tf Aj Anpoww Max working width: 880 mm No of Pressing cylinders: 4 No of Daylights: 1

Condition: excellent (used), Year of construction: 2014, power: 368 kW (500.34 HP), pressing force: 4,000 t, operating speed: 720 mm/s, table width: 2,500,368 mm, table length: 2,500 mm, clearance between the columns: 8,000 mm, total length: 4,000 mm, total width: 12,320 mm, total height: 13,440 mm, overall weight: 480,000 kg, Hydraulic press FAGOR Arrasate - JBe 4000 2,5 x 2,5 Bwjde Ad Ughepfx Anpsw MACH-ID 9872 Make: FAGOR Arrasate Type: JBe 4000 2,5 x 2,5 Control: SIEMENS TOUCH YOP: 2014 UNIQUE OPPORTUNITY FAGOR ARRASATE 4,000 TON HYDRAULIC FORMING PRESS Complete with Special Tooling for Hot & Cold Forming for bending 2D and 3D Steel Segments Unlike a conventional hydraulic press, this installation offers a specialized solution for manufacturers working with heavy steel plates, curved components and complex geometries where conventional plate rolling alone is insufficient. DESIGNED FOR DEMANDING INDUSTRIAL APPLICATIONS Pressure Vessels & Boilers – Forming heavy curved plates, vessel sections, heads and complex pressure-retaining components. Heavy Steel Fabrication – Manufacturing large 2D and 3D formed parts that cannot be produced economically with conventional bending equipment. Power Generation – Producing heavy formed components for conventional and next-generation energy installations. Defence Industry – Manufacturing specialized heavy steel components requiring high forming forces and complex geometries. Mach4Metal can support the complete project, including: Technical inspection and evaluation Professional dismantling and loading Heavy lifting and international transport Worldwide shipping and export coordination Reinstallation and commissioning support Operator training and technical assistance Aditional Technical data SIEMENS CNC Controll Panel RAM cilinder diameter1900 mm RAM Styroke 1600 mm Large tooling package with Round dies Large tooling with Sword / Shipyard Blocks Vessel Boiler Dies  Middlel bridge with tool adapter Tower with 6 x  Upper Dishing Dies Radius Tower with 6 x Lower Dies  Max. tool weight 10 Ton Max. tool weight 5 Ton ( half way) Capacity Kg: 400000 Distance between column:8000mm Table Length: 2500mm Table Width: 2500mm Ram stroke: 1600mm Approche speed: 12000mm/min. Working speed: 720mm/min. Return speed: 12000mm/min. Power: 368kW Length: 4000mm Width: 12320mm Height: 13440mm Weight: 480000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!