Used Horizontal Hydraulic Press for sale (30,651)

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Nwedpfezb Il Nex Alceh Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Technical details: pressure: 160 t table surface area: 1.260 x 600 (vertical) mm table plate diameter: 1260 x 600 x 70 (vertical) mm ram surface area: 700 x 360 mm throat: 300 mm Nedju Nfpuopfx Alcjwh weight of the machine approx.: 9000 kg dimensions L x W x H: 3,7 x 1,5 x 2,2 m distance base - ram: 1.000mm mounted ram construction: L:660 x W:300 x H:370mm rollers 1x on the right and 1x on the left with vertical adjustment 250mm. (Ø 80x300mm) *

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Nwsdpfx Ajwndnujlcjh Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: used, Hydraulic Horizontal Straightening Press, Horizontal Press STENHOJ Type 40 Horizontal hydraulic press for straightening work on steel beams or welded structures Serial no. 42615 Year of manufacture: 1984 Refurbished in 2025 Pressing force: 40 tons Ram stroke: 300 mm Piston rod diameter: 80 mm Working height: 780 mm (floor to center of piston rod) Table size without pressure pads: approx. 1000 x 290 mm Installation dimension, ram + press block to counter bearing: 260 mm (with pressure pads on ram and counter bearing) Installation dimension, ram without press block to counter bearing: 440 mm (without pressure pads on counter bearing) Height of the two adjustable pressure pads: 130 mm Pressure pad width: 220 mm Advance speed: 10 mm/s Return speed: 20 mm/s Nwodpfxjydqd He Alceh Hydraulic tank capacity: approx. 60 liters Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Cylinder stroke operated manually via an actuation lever, sensitive control via mechanical control valve - Pressing force readable via pressure gauge - Ram stroke position with actual value display, digitally readable, ideal for precise repeatability of pressure points during straightening - 2 adjustable counter bearings via threaded spindle (centric parallel adjustment from 290 to 890 mm) - Straightening tools with rounded pressure faces - Infeed rollers for material support, centrally height-adjustable via handwheel (roller width = 250 mm) Required space (L x W x H): 170 x 140 x 100 cm Weight: 1250 kg In excellent condition

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 31X8030, Mold simulation platform. Manufacturer: STÄUBLI, Type: K8540019, Year: 2011, Serial No.: 31X8030, 2-piece, sliding elements, hydraulic quick-clamping device, quick-change system check (electric/pneumatic/hydraulic), safety light curtains, switch and control cabinets, programming terminal, external hydraulic power units. Mold size 2500x1800mm. Mold inspection platform. Nodpfeyh Ryajx Alcewh

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW Nwsdotndu Uspfx Alceh CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Nodpfx Alscmat Uscewh Mechanical compression setting more photos an questions

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Nwodpfxeu Axfcs Alcjh Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland Njdozdaxyspfx Alcewh

Condition: good (used), Year of construction: 1991, Electric workshop hydraulic press Capacity: 50 tons. Table width: 800 mm, cylinder stroke: 200 mm. Nodszhfzmepfx Alcowh

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm Nwsdpfx Aloyif Nrocsh table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Year of construction: 2022, Force: 3000 kN; Stroke: 250 mm; Dimensions: 705 x 500 x 500 mm; Weight: 11.5 tonnes; Hydraulic press, nominal pressure: 260 bar; Maximum pressing force: 300 tonnes. Nwodpfx Alszgv Rcocoh

Condition: good (used), Pressure 63to Stroke -400mm Distance ram-table 700mm Table size 1800x500mm Nwodpfx Ajch Dacslcjh MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic Nwjdezd Tf Sspfx Alcoh • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe • 2 pcs. CNC bending aids incl. parking position • Pneumatic die shifting • Foot switch • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) All information without guarantee.

Condition: used, Year of construction: 2009, total length: 2,700 mm, total width: 1,700 mm, total height: 3,900 mm, Colour: Green Empty weight: 5.000 kg - Year: 2009 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press force [ton]: 200 - Min. stroke [mm]: 1 - Max. stroke [mm]: 1100 - Table length [mm]: 730 - Table width [mm]: 1900 - Transport dimensions: 2700mm x 1700mm x 3900mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nwodpfxozdnzhj Alcjh Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t Njdpfx Aox Sr Evelcjwh In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Hydraulic press 10 tons. Installation height 400 mm Overhang 270 mm Width 1000 mm Without hydraulic pump Transport dimensions: Height without pallet 1440 mm Width 1000 mm Depth 780 mm Weight 325 kg Nwodpfx Aszdufyelcsh

Year of construction: 1992, condition: used, Pressing force 40 t Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms Nwodjzdvcaopfx Alcsh safety distance 176 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: ready for operation (used), Hydraulic Press Machine, Coil Winding Press Machine, Used Equipment Dimensions: 1340 x 1240 x 2740 mm Weight: 640 kg Electrical Specifications: 400V Nodou Hkfpopfx Alcjwh Hydraulic Pressure: 100 bar Stroke Length: 180 mm

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Nwedexlp T Ispfx Alceh Manufacturer: Rems Type: Power-Press XL ACC Pressing range: Ø 10 – 108 mm (up to 110 mm) Pressing force: 32 kN Motor: 450 W universal motor Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Cable length: 2900 mm Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Additional features: Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Press jaws: 76.1; 88.9; 108 mm

Condition: used, Zschokke HAP 063a - 4/6 - Hydraulic press brake - Year of manufacture: 1967 Technical data - Max. bending force: 630 t - Max. oil pressure: 400 bar - Distance between uprights: 4100 mm - Max. bending length: 6000 mm - Overhang: 375 mm Nwedpfozf Hnijx Alcjh - Stroke (adjustable): 0 - 500 mm - Distance between tool clamping surfaces: 300 - 800 mm Hydraulic pumps: - Main pumps: 2 x 22 kW - Delivery rate at idle: 2 x 153 l/min - Delivery rate at full load: 2 x 33 l/min - Control pump: 0.75 kW Installation: - Footprint (W x D): 6960 x 3250 mm - Height above ground: 4100 mm - Undercarriage, front: 2200 mm - Undercarriage, rear: 600 mm - Operating voltage: 3 x 400 V / 50 Hz - Machine weight: 51000 kg

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Njdpfxoudph Io Alcowh

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Manufacturer: CEMBRE Model: B35-50D Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Transport case Documentation Nsdpfx Aley H Rdgocewh Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work

Condition: excellent (used), I sell a Lukas baler in very good condition. Nodoum Htzopfx Alcowh

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc. Nodpfszgdc Hox Alcewh