Used Hydraulic Punching Machine for sale (72,926)

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Serial number: 4343 Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Bed opening: 1,120 x 400 mm Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Dedpfszil Suox Apwswa Max. strokes/min: up to 1,000 (feed-dependent) Accessories Kohler unwinder Heспо straightener SYS PHS 5000 Sound-insulating enclosure (orange)

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS Dwsdszh I Iiepfx Apwea The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: good (used), functionality: fully functional, Boschert Compact Rotation 1000x2000 Equipped with the Trumpf tool system and featuring the Boschert rotation, which enables continuous 360° rotation of the punching tool up to tool size III. Punching force: 28 tons. Spray device. Chip extraction system. Dwodpfx Aeznu T Eopwea

Condition: good (used), functionality: fully functional, Boschert EL 300 The Boschert EL 300 is a manual punching machine with a punching force of 28 tons. Equipped with a Trumpf tool holder, dies up to size III (pitch circle 105 mm) can be installed. It offers continuous stroke, single stroke, and jog mode operation. In addition to the standard foot pedal, the punching stroke can also be activated via a two-hand control, which is particularly useful for workpieces where the acrylic shield must remain in the upper position (e.g., L-shaped brackets), allowing operation via the two-hand control. Dsdpfjznu H Ssx Apwewa The integrated drawers are ideal for storing punching tools and accessories. The simple operation and quick tool change make this machine accessible to everyone.

Condition: new, Year of construction: 2026, Claw machine lift with an impressive lifting capacity of 20 tons is an excellent tool for industries that require huge loads. Equipped with a robust design and innovative technical solutions, this claw lift ensures efficiency, safety and reliability in every application. The main distinguishing feature of the claw jack is its claw lifting mechanism, which allows for reliable and precise gripping of various objects. Thanks to this, handling large and non-formine loads becomes much more efficient, and the operator has full control over the lifting process. The lift with a lifting capacity of 20 tons is not only strength, but also protection against failures, it guarantees safe lifting and transport of heavy loads to high altitudes. The claw lift design has been carefully designed to ensure maximum stability during operation. The solid frame and durable materials make the jack cope with difficult industrial conditions while maintaining full functionality and reliability. To sum up, a machine claw machine lift with a lifting capacity of 20 tons is a powerful tool that will meet even the most demanding industrial tasks. Its impressive load-bearing capacity and precise claw mechanism make it an invaluable support in the area of lifting and moving large loads in a variety of working environments. Technical data: Maximum static load 20T Maximum lifting capacity at the head of the lifter 15T Dsdsvvk D Hspfx Apwjwa Maximum lifting capacity at the lifting foot 12T Minimum height (foot/head) 40 / 325 mm The hight of raising 140 mm Screw pin adjustment 0-60 mm Net weight 68 kg

Condition: new, Year of construction: 2026, Constructed from high-quality materials, this lift features a solid construction, ensuring durability and reliability in extreme operating conditions. The solid frame and stable platform enable the handling of even the heaviest loads, while ensuring stability and operator safety. Thanks to advanced control systems, the operation of the 10-ton machine lift becomes intuitive and precise. The operator can easily adjust the lifting height and smoothly control the speed, which enables effective work in various conditions. The claw lift is also equipped with a screw pin on which we can also lift machines or heavy objects. The safety of use of the 10-ton machine lift is a priority, which is why it is equipped with safety systems. To sum up, the 10-ton machine lift is an irreplaceable tool for industries requiring lifting and moving large and heavy loads. Thanks to its solid construction, ease of use and priority on safety, this lift provides invaluable support in everyday industrial tasks. Dwjdpfsvvk Aisx Apwea Technical data: Maximum static load 10T Maximum lifting capacity at the head of the lifter 7,5T Maximum lifting capacity at the lifting foot 6T Minimum height (foot/head) 35 / 320 mm The hight of raising 160 mm Screw pin adjustment 0-80 mm Net weight 25 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pressing force: 220 kN Sheet metal thickness – max.: 8 mm Travel distance – x: 3000 mm Travel distance – y: 1500 mm Positioning speed, X-axis: 90 m/min Positioning speed, Y-axis: 60 m/min Positioning speed, simulation: 108 m/min Positioning speed, rotary axis: 360 °/sec Punching diameter: 76.2 mm Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 pieces Tool change time: 1.5 - 6.5 sec Machine weight, approx.: 11,050 kg Dimensions: 6400 x 5800 x 2100 mm including setup cassettes including tool cabinet with tools Dwjdpozil Dkefx Apwoa including Quick-Set

Condition: used, Year of construction: 1998, functionality: fully functional, Punching force: 165 kN Working area: 2070 x 1280 mm Sheet metal thickness: 6.4 mm Control system: CC 220 Workpiece weight: 150 kg Dwsdpszilz Aefx Apwea Punching diameter: 76.2 mm X-axis: 80 m/min Y-axis: 55 m/min Machine weight, approx.: 8000 kg

Condition: used, Year of construction: 2001, operating hours: 291,559 h, functionality: fully functional, machine/vehicle number: 1, punching force: 20 t, total height: 2,350 mm, total width: 3,000 mm, total length: 5,350 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 10 mm, type of input current: three-phase, punching diameter: 26 mm, workpiece weight (max.): 90 kg, overall weight: 17,000 kg, table width: 1,250 mm, table length: 3,000 mm, input frequency: 50 Hz, feed length X-axis: 1,250 mm, feed length Y-axis: 3,000 mm, input voltage: 400 V, Equipment: safety light barrier, We offer this used LVD DELTA 1250 punching and cutting machine, manufactured in 2001 – it is fully functional and comes with 100 various punching tools. The working surface is 1250x3000 mm, and it can be further repositioned, allowing you to punch longer sheets. We also include a tool grinder with the punching machine. Manufacturer: LVD Model: DELTA 1250 Year of manufacture: 2001 Dwedpfxozp Eb Nj Apwoa If you have any further questions or require more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2018, operating hours: 1,600 h, functionality: fully functional, machine/vehicle number: 441, punching force: 28 t, total height: 2,020 mm, total width: 4,118 mm, total length: 4,042 mm, sheet thickness (max.): 6 mm, type of input current: three-phase, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, punching diameter: 105 mm, workpiece weight (max.): 200 kg, overall weight: 8,400 kg, table width: 1,250 mm, table length: 2,000 mm, input current: 35 A, input frequency: 50 Hz, power of the servo motor: 3,700 W, feed rate X-axis: 120 m/min, feed rate Y-axis: 75 m/min, space requirement width: 4,100 mm, space requirement length: 4,600 mm, space requirement height: 2,200 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,250 mm, positioning speed: 60 m/min, construction width: 4,118 mm, tool length: 30 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.025 mm, Equipment: safety light barrier, The Boschert Compact 1250 rotation machine is fully operational. Please contact us to arrange a viewing. Djdpfsww U T Hox Apwewa

Condition: good (used), Year of construction: 2014, functionality: fully functional, Sheet width: 3000 mm Sheet length: 1500 mm Sheet thickness: 8 mm Workpiece weight: 200 kg Punching force max.: 220 kN Total power requirement: 9.5 kW Space requirement approx.: 7395 x 6540 x 2072 mm Equipment: Punch head: - Hydraulic single-tool chuck with 360° rotation - Manually adjustable clamping force - Programmable clamp (active/passive/re-positioning) - Spray lubrication for punch - Stroke counter for punch - Level monitoring for threading and tool lubrication Control system: - Open control system based on Sinumerik 840 D - 12" TFT color display - Teleservice via internet - Automatic shutdown Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual light curtains - Rapid shutdown of hydraulics - Bulge detection Programming: - TruTops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread forming function 1 x Deburring and rolling technology Dsdpfxjy Sak Tj Apwswa 1 x SoftPunch function 4 x individually openable clamping jaws 4 x height-adjustable clamping jaws 1 x Re-positioning cylinder 1 x Sensor for stripper (included in rest material-free processing) - GripMaster - Rest material grippers with sensor technology - Shear lift table 400 mm - Tilting rest material pallet 3000 x 1500 mm - SheetMaster - Operating hours: 65,000 h

Condition: used, Shearing/Punching Machine PEDDINGHAUS 210 SUPER 11 Throat depth: 305 mm Maxi punching capacity: 40 T Power: 3 kW Punching capacity: Ø 20 x 15 mm - Ø 90 x 5 mm (see abacus) Djdpozmwnpefx Apwjwa Shearing capacities: (see abacus) Round shearing: Ø 34 mm Square shearing: 30 x 30 mm Angle shearing capacity: 100 x 10 mm 1 side for shearing/undercutting - 1 side for punching Delivered with some punches Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1800 mm Weight: approx 1,2 T

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Dwjdpfewzyg Hjx Apwja

Condition: excellent (used), Year of construction: 2018, SBL 1060 SE Year: 2018 Sheet size (max.): 1060 x 760 mm Sheet size (min.): 350 x 400 mm Stamping size (max.): 1045 x 745 mm Gripper margin: 11 mm Platen pressure (max.): 300 tons Production speed: 8,000 sheets/hour Total power consumption: 20 kVA Elevated machine: 400 mm Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 x 350 mm to 1060 x 760 mm Max. cutting format: 1050 x 740 mm Min. sheet size: 470 x 350 mm Max. sheet size: 1060 x 760 mm Max. cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max. 4 mm) Min. gripper margin: 9.5 mm Djdsznlbajpfx Apwjwa Max. inside chase size: 1155 x 852 mm Cutting plate size: 1076 x 756 mm Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L x W x H): 5,900 x 5,700 x 2,615 mm Max. pile height – feeder (with pallet): 1,750 mm Max. pile height – delivery (with pallet): 1,450 mm - Vacuum belt on feeder - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - Quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline system - Micrometric system - Stripping - Quick lock for upper and central stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) - Delivery Section - High-pile automatic non-stop delivery with conveyor - Sheet deceleration device - Tab insertion device

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Smart Line, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 180 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, power: 11 kW (14.96 HP), input voltage: 400 V, number of digital displays: 1, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, DIGIMA W12-8x3200 Hydraulic Four-Roll CNC Plate Rolling Machine The DIGIMA W12-8x3200 is a hydraulic four-roll CNC plate rolling machine designed for accurate, repeatable and efficient sheet-metal forming. With a working width of 3200 mm, it is suitable for producing large cylindrical parts, sleeves, pipes, curved sections, housings, tanks and other technical components used in metalworking, steel construction, ventilation, machinery manufacturing and industrial production. The four-roll system provides a major advantage over conventional three-roll machines. The sheet is held securely between the upper and lower rolls, while the two side rolls perform the pre-bending and rolling operations. This arrangement allows both edges of the sheet to be pre-bent without removing and turning the workpiece, reducing handling time and limiting the length of straight sections left at the ends. The result is improved repeatability, higher productivity and more consistent part geometry. The W12-8x3200 can roll sheet metal up to 8 mm thick and perform pre-bending up to 6 mm. Its 3200 mm working length enables the processing of wide sheets for both one-off jobs and series production. The upper roll has a diameter of 210 mm, the lower roll 190 mm, and the side rolls 180 mm. The minimum rolling diameter is 400 mm, allowing the machine to produce a wide range of cylindrical and curved components. The hydraulic drive ensures smooth, stable movement and reliable clamping force throughout the forming process. The 11 kW motor provides the power required for regular industrial operation, while the rolling speed of 4 m/min supports efficient production without compromising process control. The rigid machine body and carefully arranged roll system help guide the material accurately and reduce unwanted deformation. Computerised CNC control makes the machine convenient to set up and operate. The operator can control roll movements, monitor the forming process and reproduce previously established settings for recurring jobs. This is especially useful in batch production, where the same diameter, radius and dimensions must be achieved repeatedly. The control panel also helps reduce setup time and simplifies everyday machine operation. Dedpfxoznw T Uo Apwewa The operating sequence is straightforward. First, the sheet is inserted and stabilised between the rolls. The side rolls then pre-bend the sheet edges, minimising flat ends. Finally, the material is passed through the roll system until the required tube, sleeve, arc or cylindrical shape is obtained. The machine can also be used for forming conical components by applying a controlled inclination of the rolls. Thanks to its wide working capacity and computer-controlled operation, the machine can be used in flexible workshop production as well as organised manufacturing processes. It is suitable for companies producing ventilation ducts, structural elements, machine covers, tanks, steel sleeves and custom-made components. Repeatable CNC settings are particularly valuable when several identical parts must be formed with the same diameter and curvature.

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Weitere Gebrauchtmaschinen von Mabu, Bruderer, Bihler und Schaal stehen in unserem Lager zum Verkauf. Technical Specifications Model: T 130R CE Dwsdpfxjzg U R Ie Apwja Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3–6 bar

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,100 h, Manufacturer TRUMPF Type TruMatic 1000 - 1600 Fiber (K07) Year 2018 X-axis travel 3000 mm Laser nominal power 3000 Watts Control system Bosch CML 45 Punching force 16.5 to Max. sheet thickness 6.4 mm Max. material weight 150 kg Standard configuration Machine ⦁ Box frame ⦁ Hybrid axis system ⦁ Linear magazine with 20 stations for clamps and tools ⦁ Hydraulic clamps (3x) ⦁ Drives with maintenance-free AC motors ⦁ Follow-up device with programmable pressure foot ⦁ Foot switch for closing the clamps ⦁ Part separator chute, right ⦁ Part removal flap, left ⦁ Sensor for part removal flap ⦁ Work area lighting ⦁ FocusLine ⦁ SortMaster Compact (retrofit option) TRUMPF Laser ⦁ LLK according to standard layout (10m) ⦁ Laser power control ⦁ Laser log function ⦁ Enclosed beam guidance via laser light cable (LLK) ⦁ Separate power supply for the TruDisk Compact cutting unit ⦁ Solid-state laser compact cutting system ⦁ Protective glass ⦁ Collision protection ⦁ ControlLine Punching head ⦁ Delta drive ⦁ Rotatable single-station tool adapter ⦁ Programmable pressure foot position ⦁ Tool length compensation ⦁ Punch spray lubrication ⦁ Punch slug vacuum ⦁ Forming function ⦁ Punching stroke counter Control system ⦁ TRUMPF control system based on Rexroth IndraMotion MTX ⦁ Touch panel with TFT 19" color screen ⦁ Integrated technology data ⦁ Programmable cutting gas pressure ⦁ Interface for remote maintenance ⦁ Automatic shutdown with wake-up function ⦁ Program manager ⦁ Production plan Dwjdszgfnqspfx Apwea Options: Copper cutting package Brass cutting package Compressed air cutting Outfeed of small parts Brush tables Multitool Sensor for part separator chute Sign function, quick beading Multibend Thread forming Deburring roll technology Sorting function for part separator chute Height-adjustable clamps

Condition: good (used), functionality: fully functional, Hydraulic sharpening machine for band saws. Dsdpfxjzdkbkj Apwowa Type Hydromat. Also ideal as a spare parts machine.

Condition: good (used), Punching machine, hydraulic punching machine, hydraulic press, hydraulic press -Insert tool -Width: 290 -Length: 550 -Height: 260 -with hydraulic unit Dodpjb A H Taofx Apwjwa -Steering -Foot switch -Dimensions: 800/700/H1300 mm -Weight: 400 kg

Condition: excellent (used), Trumpf We offer a laser and punching machine here. Technical specifications: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser power: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN active back-up): 220 kN Active back-up (programmable in steps): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: Punching operation: 35 mm Laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous stroke sequence: Punching: 900 strokes/min Marking: 2800 strokes/min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on the linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Dodpfjzd Ulaex Apwswa Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average positioning spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Manufacturer: TRUMPF Type: CS20a EXCELLENT CONDITION Dwsdpfj Dv I Tox Apwoa

Condition: used, Year of construction: 2017, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Empty weight: 1.400 kg Steel round: 40mm Steel flat: 200x20mm / 300x15mm Dedpfx Ajwraazspwewa Notching + Punching + cutting - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 155976 - Drive system: Conventional - Punching force [ton]: 60 - Round bar cutting capacity [mm]: 40 - Motor power: 4.0kW - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, pressing force: 30 t, We offer this very good Bihler GRM 80 punching and bending machine, year of construction 1989. with 5 slides, 30T press, straightener, feeder with decoiler Tooling is not included If you have any questions or need more information, feel free to send us a message or give us a call. Dwjdpfjywty Eex Apwoa

Condition: used, axle configuration: 3 axles, first registration: 09/2016, total length: 13,680 mm, total width: 2,550 mm, suspension: air, tire size: 235/75R17.5, wheelbase: 9,500 mm, color: blue, Year of construction: 2016, Equipment: ABS, Total loading floor, from the front to the ramp: 950 cm. Flat loading floor: 810 cm. Internal height: 309 cm. Front overhang: 370 cm. Height from the front to the roof: 261 cm. Sliding roof / Edscha roof. = Further information = Axle configuration Tire size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Tire tread depth, left inner: 50%; Tire tread depth, left outer: 50%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Dwedozk H Uyopfx Apwea Rear axle 2: Twin tires; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Rear axle 3: Twin tires; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 70%; Tire tread depth, right outer: 70% Weights Unladen weight: 9,200 kg Payload: 38,800 kg GVWR: 48,000 kg Maintenance APK (Technical Inspection): valid until 10.2026 Identification Model number: HYDRAULIC RAMP / FORK LIFT - MAC = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the texts provided.

Condition: used, Engine and gearbox from an Allgaier, part of a Bihler GRM 80, model year 1984. Dodpfxjzl Ez Ij Apwjwa ATTENTION!! This offer includes only the engine and gearbox as shown in the images. According to the previous owner, the gearbox was overhauled and has not been used since the overhaul.