Used Hydraulic Steady for sale (15,379)

Condition: like new (used), Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: C1-140_10, CrimpOne C1-140 Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/2 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 3 kW Ppsdpfx Abexd U Nlsmel Power supply: 380 V Crimps per hour: 850 pcs Length: 600 mm Width: 435 mm Height: 630 mm Weight: 135 kg Noise level: 71 dB(A) Available immediately from stock!

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit -Manufacturer: Orsta, universal unit -Engine: 2.2 kW/1410 rpm -Nominal pressure max.: 160 bar Podpfev Auxusx Abmjpl -Liter output: 2.5 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 750/380/H620 mm -Weight: 110 kg

Condition: ready for operation (used), throat depth: 260 mm, operating speed: 7 mm/s, reverse speed: 73 mm/s, total length: 4,270 mm, total width: 1,750 mm, total height: 2,850 mm, travel distance Z-axis: 190 mm, empty load weight: 12,000 kg, passage width: 2,550 mm, Durma HAP 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Pedex R E Hwepfx Abmopl Backgauge: elec Locking speed: 100 mm/sec

Condition: good (used), Year of construction: 1992, Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Reinforced steel shear: hydraulic -Number of rods: Ø 12mm/8 pieces, Ø 16mm/4 pieces, Ø 35mm/1 piece Ppedpfxsx Srlpj Abmol -Foot switch: 1 -Dimensions: 1230/680/H640 mm -Weight: 419 kg

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request Ppedpfx Ajvzxrpobmjl

Condition: used, Year of construction: 1978, pressure 100 t stroke 150 mm throat 345 mm dayligth 400 mm Ppsdjvzxp Uopfx Abmol table surface area 1200 x 600 mm table height over floor 850 mm ram surface 560 x 500 mm feed down 350 mm/s feed up 350 mm/s working feed 25 mm/s oil volume 560 l power requirement 22,0 kW Weight 8,3 t dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light guard (Sick), mechanical depth stop with hydraulic cutting impact cushioning, two-hand operation

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW Ppsdovuuckepfx Abmol weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1993, pressure 2 x 6,3 t stroke 307 mm Psdpfx Ajvut Rmsbmjpl throat 180 mm dayligth 900 mm table surface area 470 x 360 mm table height over floor 810 mm ram surface 45 mm feed down 137 mm/s feed up 33 mm/s working feed 540 mm/s oil volume 140 l power requirement 3,0 kW Weight 1,5 t dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm Pedpfjvut H Ijx Abmopl hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm Pedjvuk Ezjpfx Abmjpl table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm table height over floor 850 mm Pedpfx Ajvut Edsbmopl ram surface 700 x 700 mm feed down 300 mm/sec feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be inspected in running condition in our warehouse - new control can be offeren on request

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm Psdpevzxphofx Abmepl permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: excellent (used), functionality: fully functional, RÖCHER conversion 1991 (formerly SCHÖN) Pressing force: 1,600 kN Ram stroke: 160 mm Table dimensions: 850 x 650 mm Light curtain control system Next mandatory inspection: February 26 Clamping pin lock in the ram Rapid approach speed: 274 mm/s Working speed: 20/10 mm/s Return speed: 273 mm/s Drive power: 30 kW Psdpfxjx Sw Iio Abmopl Operating voltage: 380 Volt/50 Hz Max. fuse rating: 100 A

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, lifting height: 1,450 mm, load capacity: 1,000 kg, total length: 1,700 mm, total width: 760 mm, input voltage: 400 V, type of input current: three-phase, height adjustment type: hydraulic, operating pressure: 180 bar, We are selling a mobile lifting platform from Trepel, Wiesbaden, which was used for loading and unloading trucks. The platform is in very good condition and operates flawlessly. Viewing is possible by appointment. Pjdpeydc Dfofx Abmepl

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, control type: CNC control, actuation type: electric, working width: 4,000 mm, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 4 mm, input voltage: 380 V, input frequency: 50 Hz, total width: 4,300 mm, total height: 1,800 mm, number of support arms: 2, year of last overhaul: 2026, Equipment: documentation/manual, type plate available, SCHIAVI-AMADA GH540A guillotine shear, fully operational and ready for use, complete with sheet metal evacuator and programmable positioner ENC1 TASK. Ppsdpfx Aeyf H Uwsbmel

Condition: new, sheet thickness: 10bending length: 4100upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- Pedpfx Asd Ab Ryobmjpl - side supports EURO 10.250,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Podpfsmpfwdjx Abmjpl Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: used, mileage: 299,179 km, power: 485 kW (659.42 HP), first registration: 03/2022, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x4, wheelbase: 3,350 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 7,050 mm, total width: 2,550 mm, Year of construction: 2022, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, retarder, seat heater, spoiler, traction control, = Additional options and accessories = - Adaptive cruise control - Roof spoiler - Double glazing - Remote central locking - LED headlights - Leather interior Ppodpfx Ajycqz Nsbmel - Alloy wheels - Air suspension - Microwave - Engine brake - PTO (Power Take-Off) - Radio - Disc brakes - Sun visor - Spotlights - Lane departure warning system - Auxiliary heater (parking heater) - Stationary air conditioning = Notes = Scania R660 6x4 Full air suspension. Engine PTO / hydraulic. Adjustable fifth wheel. Retarder. Alcoa wheels. Leather seats. Heated and ventilated driver’s seat. Microwave. Coffeemaker. Fridge. Adaptive cruise control. = Further information = Technical data Number of cylinders: 8 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tyre size: 385/55R22.5; Steered; Left tyre tread: 50%; Right tyre tread: 50% Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Left inner tread: 60%; Left outer tread: 60%; Right inner tread: 60%; Right outer tread: 60% Rear axle 2: Tyre size: 315/70R22.5; Twin tyres; Left inner tread: 60%; Left outer tread: 60%; Right inner tread: 60%; Right outer tread: 60% Weights Unladen weight: 10,075 kg Payload: 19,925 kg Gross vehicle weight (GVW): 30,000 kg Interior Upholstery: Leather Financial information Price: On request Identification Type number: R660 6x4 / RETARDER / HYDRAULIC = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). We speak Russian. We strive to provide accurate information, but no rights may be derived from the published texts.

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Podpfxeyabf Ho Abmjpl

Condition: as good as new (ex-display), The HPK 100 A is a powerful hydraulic press within the Hydraulic Presses category, part of the broader Presses group. Engineered with a robust C-frame construction, this machine is built in Europe, ensuring high reliability and longevity. Its versatile design allows for seamless operations such as punching, straightening, forming, and drawing, making it a valuable addition to various industry segments. The HPK 100 A features a significant pressure force of 100 tons and a stroke speed of 4 mm/s, ensuring precise and consistent performance. The user-friendly mobile control panel and easy stroke length adjustments offer added convenience, while the integrated safety standards guarantee operator security. Whether for testing or batch production, this hydraulic press can be tailored to meet specific requirements, with possibilities for Industry 4.0 integration. For those looking for a robust solution in hydraulic presses, you can order online to enhance your production capabilities today. Ppodoq R Rk Djpfx Abmol

Condition: good (used), Year of construction: 2008, machine/vehicle number: 108334, Offer 25518 Hydraulic, Twin-column Guided Mitre Band Saw Technical Data: - Cutting range at 90° • Round: 310 mm • Flat: 520 x 310 mm - At 45° left, flat: 350 x 310 mm - At 30° left, flat: 230 x 310 mm - At 45° right, flat: 260 x 310 mm - Mitre adjustment left and right - Minimum workpiece dimensions (round/flat): 10 / 10 x 8 mm - Smallest cut length: 40 mm - Mitre angle display - Saw band dimensions: 5000 x 34 x 1.1 mm - Variable cutting speed: 20 - 140 m/min - Infinitely adjustable cutting pressure: 0 - 10 m/min - Hydraulic workpiece clamping with adjustable clamping pressure - Bundle clamping device - Total drive power: 400 V / 6.0 kW - Space requirement approx.: W 3000 x H 1600 x D 1750 mm - Weight approx.: 1900 kg - Discharge roller conveyor with position-controlled length stop: 6000 mm Ppsdpfxsyc Um Ne Abmol - 1 x Infeed roller conveyor: 2500 mm - 3 x Infeed roller conveyors: 1200 mm each

Condition: refurbished (used), functionality: fully functional, We are selling an excavator magnet, electromagnet, and hydraulic magnet ZANETTI HM5-14AZ SAT With mounting plate for quick coupler and practical 2+3 teeth for "digging through" construction debris and recycling material. The magnet is hydraulically driven, e.g., via the circuit for the trench cleaning bucket! The magnet contains an oil motor that drives a power generator, which in turn activates the electromagnet. You do NOT need a separate generator. The magnet is powered by the excavator's hydraulic system. You only need two hydraulic hoses to the excavator, forklift, or wheel loader. The magnet contains a hydraulic motor that drives the power generator inside the magnet. You turn the magnet on and off using the excavator's joystick. Ppedovtmmlopfx Abmol A very ingenious design! Excavator sizes from 5-14 tons. A 6-13 ton excavator with a hydraulic quick coupler (Likufix, OilQuick, Lehmatic, or similar) is ideal for quickly switching from bucket/grab to magnet. The purchase price pays for itself very quickly through the rapid sorting of reinforcement and other steel parts (it also lifts medium-sized steel beams, see photo) and the resulting scrap value! The magnet has seen very little use and is in very good, ready-to-use condition. The electronics have been improved (new electrolytic capacitors, more stable construction. See last photos). Sale excludes any warranty or guarantee. Sale to dealers or commercial customers only. The price is NET + 19% VAT. Pickup in 96231 Bad Staffelstein or delivery to you for an additional charge (we will be happy to calculate transport costs upon request).

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Ppedpfxex Sr Evs Abmel Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2025, total height: 2,100 mm, total width: 800 mm, total length: 2,200 mm, Empty weight: 1.145 kg Price: On request - Year: 2025 - Documentation available: No - CE marking present: Yes - CE certificate present: Yes - Serial number: PPW10061N2025009 - Control: Conventional - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1500mm - Table length: 1500mm - Ram width: 120mm - Ram length: 120mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 2200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 1145kg Podpfexb Scwox Abmspl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total height: 2,850 mm, total width: 1,800 mm, total length: 1,100 mm, Empty weight: 6.000 kg Podpfx Abexywkqsmjpl - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 10340 - Control: Conventional - Table width: 550mm - Table length: 630mm - Ram width: 500mm - Ram length: 1100mm - Model: Hydraulic - Max. stroke: 160mm - Power: 100.0ton - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum