Used Immersion Cleaning System for sale (43,258)

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, machine/vehicle number: 467, workpiece weight (max.): 500 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Workpiece weight: 500 kg Maximum temperature: 65 °C Filling volume: 2 x 300 L MACHINE DETAILS Ledoyv Aupjpfx Afuort Voltage: 400 V Frequency: 50 Hz Total power requirement: 84 kW Heating capacity: 54 kW Permissible operating overpressure: 2 - 8 bar

Year of construction: 2024, condition: as good as new (ex-display), -Usable internal dimensions: D = 970 mm, H = 540 mm (other sizes available upon request) -Touch screen -Spray pressure: 3 bar -Basket load: 200 kg -Tank volume: 210 L -Standard accessories: • Oil skimmer • Frame, lid, and housing made of stainless steel • Time-controlled electric steam extraction • Reinforced basket made of stainless steel • Electric pump made of stainless steel • Filter made of stainless steel on the suction side of the pump • Heating elements made of stainless steel • Mechanical basket rotation with geared motor • Electrical system IP 65, control via PLC (DGT V4) • Automatic water supply Lrjdpfx Afjf A Nq Ueuot • Safety limit switch monitors lid opening • Spray nozzles made of stainless steel • Weekly timer for heating and oil separator • Operating hour counter

Condition: new, Year of construction: 2025, Technical specifications: ALKO clean air extraction system, mobile type, Model Mobil-Power Unit APU 120, motor power 1.5 kW, suction nozzle diameter = 120 mm, sound-dampened, mobile collection container, 135 liters, manual filter cleaning, dimensions: L = 1,085 mm, W = 650 mm, H = 1,985 mm, volume of dust container: 135 liters, weight: 117 kg, nominal volumetric flow rate (after cleaning): 814 m³/h. Lrodpfscdy Ndex Afust Exhibition model. Available at a special price. Location: In stock at Bitburg warehouse.

Condition: used, KEG system, manufacturer: M+F, type: Micromat M 2/2, with 1 internal cleaning station and 1 filling station, equipped with detergent tank Lrjdpfxoyzhvij Afuot

Condition: new, Year of construction: 2023, Automate your cleaning process with devices from the Superior series: lifting device with a support grid for effortless handling of parts, filter systems for dirt separation, an exclusive oil separation system (OPS), and an intuitive touch panel. Standard models are available from 150 L to 8000 L. TECHNICAL CHARACTERISTICS External dimensions of the machine: 2,140 x 1,540 x 1,720 mm Internal dimensions of the tank: 1,300 x 794 x 670 mm Usable dimensions of the parts grid: 1,270 x 685 x 470 mm Maximum load: 400 kg Height of the worktop: 980 mm Tank capacity: 692 L Power of the ultrasonic generator: 4,800 W Ultrasonic operating frequency: 28 kHz Heating element: 12 kW Lrsdpfx Asf E Nt Djfuet

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Lsdpfszkkc Usx Afujrt Weight: 230 kg CE Certification: Included

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing Lrjdpsyc H N Njfx Afujt • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Year of construction: 2024, condition: new, The OASI.S (Open Automation Systems Integrator Server) robotic material handling system for the automatic loading and unloading of IV bags and trays. This system is designed to transport filled IV bags from the cleanroom, load and position IV bags into trays using a pick-and-place robot, stack trays on a pallet, and move pallets of empty trays to and from cells. The system consists of connecting conveyors, a clean station with a delta robot, a robotic loading station (delta robot and 4-axis robot), and an unloading station (2 x 4-axis robots). The line includes: - 3 x FANUC M-410iC/315 robots, serial numbers: R24500486, R24500487, R24500488, manufactured in 2024 - FANUC M-3iA/6S delta robot, serial number R244001FB, manufactured in 2024 Lredpfx Afezx Aldsuet - FANUC M-2iA/3SL delta robot, serial number R2430075E, manufactured in 2024 The individual robot cells are equipped with dedicated grippers, four Buuusch MM 1104 B V03 TNXX pumps, conveyor feeders, additional electrical cabinets, and many other accessories.

Condition: used, Year of construction: 2006, operating hours: 18,625 h, machine/vehicle number: LC598, Used aseptic line for Tetra Pak fino 1 L - 3600 PPHTechnical Specifications & Performance DataThis complete Tetra Pak Aseptic line is an integrated aseptic packaging solution engineered by Tetra Pak for liquid food applications. The core filling machine was manufactured in 2006 and is complemented by downstream packaging equipment. Designed for industrial packaging and beverage production, it provides reliable second hand performance with hygienic processing and efficient material handling.Production speed: up to 3,600 packages/hourContainer type: Carton-based aseptic packages (Tetra Fino Aseptic family)Supported volumes: 1.0LPrimary product currently run: MilkMain filler year: 2006Additional module: SOCO System unit, year 2014Accessories: Trolley for packing with roll holder, ABC valve, 1 m mesh conveyorAdvanced Automation & Control SystemsThe line incorporates an industrial control panel for central operation of filling and downstream handling. The aseptic filler integrates automatic process sequences for sterilization, filling, and sealing under controlled conditions. Operator safety interlocks and machine guarding support safe operation, while standardized HMI navigation streamlines recipe selection and format changes. The architecture is designed for fast restarts and consistent uptime in high-demand environments.Production Line Integration CapabilitiesThis used bottling line is configured for inline operation, linking the aseptic filler with conveyors and a SOCO System packaging module. It supports integration with typical ancillary devices such as product dispensers, cap or straw applicators, and end-of-line packaging machinery. Format changeovers accommodate multiple carton volumes within the 0.2L to 1.0L range, enabling multi-product flexibility for milk and juice production. The conveyor layout ensures smooth product transfers and balanced accumulation between stations.Machine Condition & Maintenance HistoryThe equipment is reported in production with overall good condition. Continuous operation on milk indicates stable performance and consistent hygiene compliance. The 2006 filler and 2014 downstream module are maintained to sustain aseptic integrity and packaging quality, making this second hand industrial packaging line a strong candidate for rapid redeployment.Operational Performance & VersatilityOptimized for liquid food, the line supports aseptic packaging of products such as milk and juices in pillow-style Tetra Fino Aseptic formats. Key benefits include extended ambient shelf life without preservatives, high barrier multi-layer materials, and hermetic sealing. The layout offers reliable filling accuracy, gentle product handling, and quality consistency suitable for beverage production requiring long shelf life and stable logistics.Installation Requirements & Site PreparationThe system is designed for standard industrial facility layouts with room for filler, conveyors, and a compact end-of-line module. Typical utilities include electrical power, compressed air, and process water as required by aseptic operations. A clean, controlled environment ... Ledpfx Ajyh E Apefuert

Condition: new, Year of construction: 2025, Exhibition model – sold at a special price Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow: 6,000 m³/h Rated volumetric flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special feature: The unit is equipped with a noise silencer – therefore extremely quiet – can be sold with or without it. Lsdpfecdy I Tox Afusrt Location: Available from stock at 54634 Bitburg.

Condition: excellent (used), Year of construction: 2013, operating hours: 3,525 h, functionality: fully functional, machine/vehicle number: 801213, type of input current: three-phase, input voltage: 380 V, LAMINA CLG 1816 CRASH LOCK FOLDER GLUER 1, 3 OR 4 GLUE POINTS • NORDSON • COLD GLUE & HOT-MELT LAMINA CLG 1816 Crash Lock Folder Gluer available for sale. Manufactured in 2013, this machine is equipped with a professional NORDSON gluing system and can operate with 1, 3, or 4 glue points, providing excellent flexibility for different box constructions and packaging applications. The machine can work with both cold glue and hot-melt adhesive. MACHINE SPECIFICATIONS • Manufacturer: LAMINA System AB, Sweden • Model: CLG 1816 • Machine type: Crash Lock Folder Gluer • Year of manufacture: 2013 • Serial number: 801213 • Gluing system: NORDSON • Gluing configurations: 1, 3 or 4 glue points • Adhesive: Cold Glue and Hot-Melt • Operating hours: 3,525 hours • Total boxes glued: 1,595,966 • Automatic feeding • Automatic folding and gluing LOW USAGE Although the machine was manufactured in 2013, it was used in production for only approximately one year. The machine currently shows: 3,525 operating hours Lrjdpfxjzyu Nqs Afuot 1,595,966 boxes glued This represents a relatively low level of use for an industrial folder gluer of this type.

Year of construction: 2002, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V02SC0039, System Ceramics Spa – EASYLINE F50V60 (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: EASYLINE F50V60 Condition: Used – fully refurbished Status: In good working condition Automatic system designed for checking the dimensional quality of tiles and subsequent boxing. Technical information: Lsdpfxjz Df Ucs Afuort * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air Lredez Ai Tpopfx Afujt - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analog control panel, and temperature control via a digital thermostat. Functions from the PRO series can be added as optional features. We offer volumes from 60 to 7,500 liters to meet all requirements. Tank capacity: 110L External dimensions: 1970x670x970mm Usable dimensions of the tank: 550x350x250mm Ultrasonic frequency: 40kHz Ultrasonic power: 1000W Lrsdof Hqavspfx Afujt

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: Lredoyc H R Tepfx Afuet • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)

Condition: used, Control for cleaning system -Type: Autoclude M1000 Lredpfxjb Uhtws Afust -Dimensions: 335/210/H120 mm -Weight: 4 kg

Condition: new, The clean air dust extractors of the R160 series are used in trade and industry. They can be connected to individual machines, machining centers or via pipelines to multiple extraction points. The mobile clean air dust extractors impress with their high extraction performance while requiring little space. Advantages and features: - Version with bag filters can also be shaken off during operation. - Long service life thanks to bag filters - even with fine dust such as grinding dust - Direct connection to briquette press possible - Machine meets all common requirements (Category C, Bia certificate, residual dust content H3 < 0.1mg/m³) and can therefore be used in businesses without hesitation - High quality: Made in Germany Technical data: nominal volume flow: 1850 m³/h extruction nozzle: 160 mm low pressure V/min: 2550 PA motor rated-power: 2,2 kW chip collection volume: 280 l max. noise level: 73 dB(A) weight: 185 kg filter area: 8,25 m² of surface treated polyester needled felt, Ljdpfevrv Ezjx Afuert category C, BIA certificate, electroconductiv, washable- H3 < 0,1mg/m³,

Year of construction: 2012, condition: refurbished (used), functionality: fully functional, System Ceramics Spa – LINER 2000 (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: LINER 2000 60 X 90 Condition: Used – fully refurbished Status: In good working condition Automatic system designed for check quality of ceramic tiles, suitable for integration into ceramic production lines. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading Lredpfxszzz Sns Afuot * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Machine body, internal pipe system, control cabinet and washing basket made of stainless steel - electronically controlled basket drive - level control - lid locking - removable filter plate - weekly timer function Oil skimmer model WE AM version for additional manual cleaning - lid with viewing window, lighting, and sleeve gloves - low-pressure pump, 3-6 bar, with brush washing system and hand spray gun - blow-off gun, compressed air Lsdpfjf A Nqujx Afuort High-pressure unit, 160 bar, for AM version permanently installed on the machine side.

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel Lrsdpfx Aezunvasfust - Vibrator - Rotary valve discharge

Condition: new, Year of construction: 2026, Maximum cutting diameter 400 mm Maximum rectangular cross-section 400 × 400 mm Band dimensions 3860 × 34 × 1.1 mm Band speed 27 / 45 / 69 m/min Speed ​​regulation Stepless (3 ranges) Power supply 400 V Main motor power 4 kW Drive type Mechanical transmission + hydraulic system Ledpezr I T Hjfx Afusrt Machine type Automatic band saw Design Column-type Vise Hydraulic Material feed Automatic, hydraulic Control Automatic (battery mode) Feeding accuracy ±0.20 mm Cooling Coolant system (flood) Belt cleaning Wire brush Machine dimensions (L × W × H) 2400 × 2380 × 1800 mm Net weight 2100 kg Gross weight 2300 kg

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Lsdpfxeyvv Tro Afuert Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Ljdpfxsy Aagio Afujrt Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Lsdpszvp Uyefx Afuort

Year of construction: 2000, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 200401, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: Lrjdpfozzz Eujx Afuet * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.