Used Infrared for sale (264)

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Bjdpfx Aasvakdzoqjlp Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: ready for operation (used), Year of construction: 1993, Output: 1000 envelopes/min, min/max envelope size: 90mm x 120mm/176mm x 254mm, roll unwind: Contiweb, web alignment system: 1x BST, print units: 5+0 or 4+1 Doctor Blade, ink tanks: 4x Inkcan, ink pump: 4x Pneumatic, window unit: traditional punching knives and adhesive paper. Includes Top and bottom scriber, time lubrication unit, latex and dextrin sealing, infrared drying, electronic counter and monitoring. Bsdpfxotqnuxs Aaqslp

Condition: excellent (used), DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment SIZING PART (for each side): No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5.8 x 2) Free space for Milling unit FS Milling unit (vertical join trimming) ES30 + ER30 (Kw 5 x 2) 0° - 90° Softforming Milling unit SF 10 (2 x Kw 2,4) 0° - 45° Blsdpjt N Ix Refx Aaqep Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Lamps to heat the workpieces side (infrared heater) RP 10 Band Pressure zone (N.C. adjustment) Pressing rollers (revolver) both for straight and shaped edges (softforming) Soft PF40 (4 positions) mm 800 (Cesoia CI10+CS10+RL10) + Edge coils supporting unit (No. of reels) 6 Rough Milling unit RS 10 (Kw 1,3 x 2) Fine Milling unit Softforming RF 10 / SF (Kw 0,65 x 2) Fine Milling unit (Multi-profile) RF 30 (Kw 0,65 x 2) Milling grooving Unit FB 30 (Kw 4,5 x 2) 0 - 90° Profile edge scraping unit (Multi-profile) RB 30 Glue scraping unit RC 05 / Soft Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Manufacturer BARBERAN Model ECOLINE 1400 S Type of machine Laminating machine Year of manufacture 2007 Readiness dismantled / stored Technical data: Material width max mm 1300 Principle Thermal lamination Film storage Width of film max mm 1300 Material thickness min mm 3 Material thickness max mm 70 Feed rate max m/min 25 Feed rate infinite Machining Single-sided Clamping Steel roller Vacuum Brushing machine Bjdpfx Aasrur Txjqjlp Glue application Roller application Storage space 1 Heating device Infrared CE mark

Condition: good (used), Year of construction: 2014, table dimensions : 2000 X 900 mm axes : 1800 X 860 X 750mm spindle speed : 8 000 tours/ min spindle taper : BT50 spindle power : 18,5 KW tools magazine : 40 pockets coolant through spindle 20 bar prismatic slide guides Bljdpfx Aaotznlbsqep weight : 21 t BLUM receiver systems with infrared transmission mist aspiration system chip conveyor, double screw + elevator isolation transformer Table extension to reach 0 with the spindle to machine plates (removable) Preparation for 4th axis. electronic handwheel

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Control: Heidenhain TNC 530 X: 600 mm Y: 770 mm Bljdow Eut Ajpfx Aaqep Z: 675 mm Spindle speed: 16,000 rpm NC swivel rotary table: 400x400 mm HSK A 63 tool holders Renishaw infrared system

Condition: good (used), Year of construction: 2008, functionality: fully functional, Make: STARRAG HECKERT, type: HEC 400D, year 2008, Control system, Siemens, type Sinumerik 840D, travel X/Y/Z Bledpfeuav Igox Aaqjp 650 x 650 x 650 mm, 2-fold pallet changer, pallet size 400 x 400mm, NC rotary table 360 x 0.001°, 80-fold tool changer, HSK 63 tool holder, max. speed 15,000 rpm, IKZ 50 bar, coolant temperature control, belt filter, chip conveyor, spindle cooling, preparation for infrared measuring probe, operating hours 56,194; spindle hours 9,196

Condition: good (used), Year of construction: 2008, Refurbished: 2008 Format: max 320 x 470 mm; min 133 x 152 mm Product thickness: max 96 pages 57 g/m² mm Stack height pre-stack basket: 127 mm Total stack height: 330 mm Infeed height: 470 - 1,146 mm Outfeed height: 876 mm Output: max 100,000 copies/h Equipment - Inlet with discharge - Double press - Infrared counter Bedpfx Aoqpgmcjaqolp - Outfeed left - Outfeed conveyor

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm z-travel 805 mm Control Sinumerik 840D weight of the machine ca. 13 t 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 serial no. 16087 control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° Blodpfx Aaeuddgfsqep 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Condition: good (used), functionality: fully functional, This sales vehicle is fully professionally equipped and ready for use in the hospitality industry. Ideal for food trucks, events, or mobile catering. Outfitted with high-quality equipment and a practical layout for efficient operations. The perfect solution for entrepreneurs seeking to respond flexibly and on-the-go to demand for street food and on-site hospitality services. Visit us by appointment, view the vehicle, and enjoy a great cup of coffee! Brand: Kuiper Model: KD 7002 Delta Horeca Model: Professionally equipped hospitality sales trailer Dimensions (W x D): 1007 x 249 cm Registration: WX-LG-83 Number of axles: 2 Equipped with: Hewigo (B22) frying range with 4 pans, Taylor water-cooled soft serve machine, Electrolux (E7FTGHCS00) chrome-finished griddle, extendable refrigerated display, refrigerated compartment, Unox oven, extraction hood, heat bridge, bain-marie, sink, remote control for maneuvering the trailer, electrically operated awning, infrared heating (2x), and additional items as pictured. Please note! This vehicle has a registration number. Upon collection, you are required to complete the registration transfer or export through a third party on site. Additional costs apply. Warranty: Sold as seen and approved. Blodpfxow Ewiyj Aaqop

Year of construction: 2021, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: Muratex Textile Laminator, Item No. Component Description 1 Motorized Film Unwind Unit 2.5” airshaft; max roll diameter Ø400 mm. Integrated dancer system for tension control. 2 LED Lighting Panel Illuminates working area to ensure operational visibility. 3 Motorized Vinyl Unwind Unit 2.5” airshaft; max roll diameter Ø300 mm. Includes load cell system for accurate tension feedback. 4 Infrared (IR) Dryer Panel Provides efficient surface heating for bonding layers. 5 Top Silicone-Coated Cylinder Heatable up to 100°C. Used to apply heat during lamination. 6 Bottom Silicone-Coated Cylinder (Heated) Pneumatically actuated (up/down). Heatable up to 100°C. Enhances bonding precision. 7 Top Silicone-Coated Cylinder (Water-Cooled) Bljdpfx Aowy H Tkeaqsp Water-cooled for material stabilization post-lamination. 8 Bottom Silicone-Coated Cylinder (Water-Cooled) Pneumatically actuated (up/down). Water-cooled for heat regulation and pressure control. 9 Anti-Static Bar Removes static electricity from materials during processing. 10 Bonded Web Rewind Unit 2.5” airshaft and clutch system; supports rewinding up to Ø300 mm. 11 End Lighting Panel Provides terminal illumination for visual inspection and quality control. 12 Stainless Steel Free Roll (Water-Cooled) Cools bonded web while maintaining a smooth feed path. 13 Spare Bonded Web Rewind Unit Additional rewind unit with 2.5” airshaft and clutch system; Ø300 mm capacity. 14 Hoist Unit Lifts and positions rolls via airshaft edges using an arm mechanism. 15 Film Dancer System Compensates for tension variation during film feeding. 16 Load Cell System with Free Roll Delivers real-time tension measurement and feedback for system regulation. 6m length overhead lifting frame with hoist

Condition: used, Door opening button, push button, door opener, automatic door sensor -Manufacturer: eao, opening and presence detector for railway interior doors ovp -Type: RS-1 Hitachi Blsdpeud Du Njfx Aaqjp -Technology:Active infrared -Technical data: see photo -Transport dimensions: 200/140/H40 mm -Weight: 0.1 kg

Condition: used, Year of construction: 1992, Perfect binding line Müller Martini Year: 1992 Consisting of Book block feeder ITM Gathering machine Müller Martini 210-E Description: - Hand feeding station - Number of gathering stations: 18 - Pump(s) - Set up element - Criss cross delivery - Book block feeder: 3606 - Transfer into the binder Perfect binder Müller Martini 3006 /30 Z Hour counter: +/- 14.700 Description: - Number of clamps: 30 - Main milling station - Roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared): IRT - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Probag - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder Blsdpovgt Dkefx Aaqep - Scoring station - Pump(s) - 1st nipping and pressing station - HF High Frequency dryer - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm weight of the machine ca.: 14 t size of pallet: 320 x 320 mm number of spindles: 2 Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Blsdpfsw Ng D Hsx Aaqjp Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting *

Condition: like new (used), Year of construction: 2019, operating hours: 6 h, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,400 mm, table width: 1,400 mm, table length: 1,600 mm, table load: 5,000 kg, spindle speed (max.): 5,000 rpm, number of slots in tool magazine: 60, CNC traveling column milling center with rotary table and 1° x 1° automatic milling head (ISO 50) with 5,000 rpm Bedpfx Ajv Ryayoaqjlp Assembly, alignment, and commissioning available! TECHNICAL DETAILS Control: HEIDENHAIN TNC 640, HSCI X-axis: 2,500 mm Y-axis: 1,400 mm Z-axis: 1,400 mm Table size (L x W): 1,600 x 1,400 mm T-slots (number): 9 T-slots (width): 22 mm T-slots (spacing): 125 mm Max. table load: 5,000 kg Spindle Tool holder: DIN 69871 50 ISO Spindle speeds: 0 - 5,000 rpm Feed and rapid traverse Feed rate (X/Y/Z): 10 m/min Rapid traverse (X/Y/Z): 25 m/min Tool changer Number of tool stations: 60 Max. tool diameter: 125 / 250 mm Max. tool length: 350 mm Max. tool weight: 20 kg MACHINE DETAILS Main drive motor power: 24 / 28 kW Machine weight: 16,000 kg Control on: 229 min / approx. 4 h Machine on: 2,073 min / approx. 35 h Spindle running time: 334 min / approx. 6 h Program run: 877 min / approx. 15 h EQUIPMENT - MC 7522 main computer - Software: Rotary table machining, coordinate conversions, tilting of the working plane, interpolation - circle in 3 axes - MONTRONIX machine protection: crash detection, overload detection, black box - Portable, electronic handwheel HEIDENHAIN HR 510 - 3 SIEMENS AC servo feed motors - Linear measuring system via HEIDENHAIN measuring rods with DA 400 compressed air system - Universal automatic milling head K5; 5,000 rpm / 1.0° x 1.0° - bi-rotating - Horizontal chain tool changer for 60 pockets including spindle orientation - HEIDENHAIN TS460 workpiece measuring system, infrared and radio transmission - HEIDENHAIN SE 660 transmitter and receiver unit - Through-spindle cooling, 16 bar with paper filter, including cooling water spray gun with separate 9 bar pump - Air through-spindle, max. 10 bar, controlled via M function and soft key on the control keyboard - Spindle orientation for rigid thread cutting - Head and ZF gear cooling - Precision recirculating ball screws in all axes - Hydraulic counterbalance in the Z-axis PARKER - Chip conveyor system with one rear hinged conveyor - Telescopic guide covers in all three axes - Cone blow-off device via M function - Automatic central lubrication DROPSA - Coolant system Max. 8 bar via nozzle row, pressure adjustable via frequency control. - Compressed air via nozzle ring via M-function - Automatic blow-out unit of the cone - A2 + A4 head - Automatic power off via M-function - Rittal control cabinet with Rittal air conditioning and lighting - Work lighting - Central machine operation via the control panel - 5 pull studs DOCUMENTATION - Operating instructions - Programming instructions - Maintenance instructions - Lubrication instructions - Electrical diagrams - CE declaration of conformity

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Bledpfowp Hv Dox Aaqop Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet – Machine light

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" - available at short notice! (subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Load capacity: 800 kg Width of T-slots: 18 mm Number of T-slots: 3 Distance between the T-slots: 150 mm Travel ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z-axis Bljdpfx Aajifn N Noqjp Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 - 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 24 (optional 30, 40) System: chaotic Max. Tool diameter: Ø 75 mm Max. Max. tool diameter with free neighboring spaces: Ø150 mm (40 tools: Ø130 mm) Max. Wkz. length: 300 mm Max. Tool weight: 7 kg Spindle: Spindle taper: BBT-40 Big Plus® (optional DIN 69871 SK-40, SK-40 Big Plus®) Drive power (30min/cont.): 18.5/ 11 kW 15,000 rpm direct spindle drive Spindle oil cooler Coolant, chip and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around the spindle Chip spirals on the right and left in the machine bed Compressed air nozzle on the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant gun Miscellaneous: Swivel control panel Electronic handwheel (wired) Central lubrication oil / air Full enclosure Working light Heat exchanger on control cabinet Auto-Power OFF function Hand tool set Signal light Transformer 400 VAC, 50 Hz CE declaration of conformity in accordance with European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA required. Pneumatic input pressure: 6 bar Dimensions: Machine size: B2,260 x D2,900 x H2,775 mm Required floor space: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct drive spindle SK-40, 15,000 min-1 - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Tool drum magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. cabling and Harting plug without axis driver Coolant, chip and compressed air management: - Bed flushing - IKZ cooling lubricant pump with 20 bar pressure, for directly driven spindles spindles - incl. cartridge filter - Belt chip conveyor incl. chip cart (chip conveyor at the front to the left side of the machine) Air extraction: - Extraction system AR Filter ARNO 2VF "Plus" series w. EPA filter, - motor protection switch, filter status indicator Motor protection switch, filter status indicator Accessory kit for AR filter with Ø150 mm connection Measuring and monitoring systems: - BLUM TC50 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeat accuracy: 1μm - Blum Z-Nano tool length measurement and Tool breakage monitoring in the machine, incl. holder - Auto-Door - Pneumatic interface workpiece clamping available immediately.

Condition: used, Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, dryer, infrared dryer, powder coating Blsdpogbaarjfx Aaqep -Handover: as is as seen -Connection plug damaged: see photos -Tryer: used for powder coating slats/blinds production -Dimensions: 1650/570/H285 mm -Weight: 124 kg

Condition: used, Year of construction: 1992, Perfect binding line Müller Martini Year: 1992 Consisting of Book block feeder ITM Gathering machine Müller Martini 210-E Description: - Hand feeding station - Number of gathering stations: 18 - Pump(s) - Set up element - Criss cross delivery - Book block feeder: 3606 - Transfer into the binder Perfect binder Müller Martini 3006 /30 Z Hour counter: +/- 14.700 Description: - Number of clamps: 30 - Main milling station - Roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared): IRT - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Probag - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - HF High Frequency dryer - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini Three knife trimmer Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Bljdpovgt Dqofx Aaqjp

Condition: excellent (used), Year of construction: 2001, NEW ADDITION 1 used, very well-maintained 5-axis CNC machining center D E C K E L D M U 50, built in 2001, with only 14,056 spindle hours! X 500 - Y 380 - Z 380 mm - NC rotary table 500 x 380 mm with 180° swivel axis Display resolution 0.001 Spindle SK 40 / 15,000 rpm - 24-station tool changer HEIDENHAIN CNC 426 - electronic handwheel - zero-point clamping system - tool breakage detection with laser length measurement - infrared probe ready Coolant system - machine shoes - many tool holders, etc. Machine from surgical operation with regular maintenance! Complete spindle cooling system replaced in 2024. We would be happy to show you the machine live in our showroom. Delivery time: immediately - subject to errors and prior sale. Pricing: ex warehouse, plus 19% VAT, unpacked, uninsured. Payment: as is generally customary for used machines, before removal, immediately upon receipt of invoice. -- Sincerely, Bsdpjg Rhnnjfx Aaqjlp Mathias Becker Induba GmbH 78628 Rottweil

Year of construction: 2025, condition: ready for operation (used), General Data Measurements depth 6000 Additional Equipment Machine bed, slot nozzle head, mounts for wrapping tools Complete tool set for PVC/Aluminum profiles Operator safety system and control cabinet Bledpfswlky Eex Aaqjp Set of nozzles for profile cleaning Protective foil unwinder and hot air turbines Infrared screen with lamps and tool cassette This Barberan WM-33 was manufactured in 2025. A profile wrapping machine designed for versatility, it handles various materials including PVC and aluminum. It supports a wide range of foil types and utilizes PUR hot melt adhesives. Key features include a max mechanical speed of 60 m/min, profile dimensions up to 300 mm wide and 120 mm high, and a total machine length of 6000 mm. Contact us for more information about this machine. Application Types Other Woodworking Machinery

Condition: excellent (used), Year of construction: 2016, operating hours: 9,025 h, functionality: fully functional, Kunzmann BA 1000 machining center (2016) Bedjwp Hu Tspfx Aaqjlp Manufacturer: Kunzmann Type: BA 1000 Year of manufacture: 2016 Control: Heidenhain iTNC 530 HSCI Condition: used, good, in production X-travel 1020mm Y-travel 620mm Z-travel 610mm Feed 15m/min Rapid traverse 30/30/24 m/min InLine milling spindle 1-12000rpm Tool holder ISO 40 DIN 69871 Tool magazine 32 slots Clamping table 1200×610 mm 6 T-slots 18 H 8 Table load 850kg Automatic central lubrication Spindle oil cooler Chip flushing hose Spindle blow-out system Coolant device Hinged conveyor belt (right or Left) IKZ 25 bar Internal cooling by air Handwheel HR410 Infrared button TS632 Power consumption 35kVA Length 450cm Width 230cm Height 260cm Weight 7800kg Without clamping device

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total width: 2,600 mm, total length: 4,000 mm, 5 Pre-heating - WAGNER Powder Spray Booth Wagner - cleaning Wanzer S-PTG-004 Pre-heating - before spray booth - Bodpfxsvy Ebhs Aaqslp and after cleaning and Gel furnace built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Ask the drawing S-PTG-004 built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Gel oven: Only infrared radiators from Excelitas Nobelight (formerly Heraeus Nobelight) 400 V, 15000 W, heated length = 2,900 mm with a quantity of 12 units are installed here. Additional heating by metal tube heaters is not used here. Alignment oven Only metal tube radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 1 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 2 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here.

Year of construction: 1997, condition: used, Control for UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface lamp, UV painting system -Manufacturer: IST Metz, control for UV dryer lamp -Type: M-20-1-S-SS -UV tubes: type M 200 S 2 -UV range: 180-450mm -Quantity: 4x controls available -Price per piece Blsdsrd Acpjpfx Aaqep -Dimensions: 600/360/H600 mm -Weight: 77kg/piece

Condition: used, Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, dryer, infrared dryer, powder coating -Infrared dryer: used for powder coating slats/blinds production -Manufacturer: Himmel, type HA 5-2-9/500 -Geared motor: WEG 0.37 kW -Dimensions: 880/1050/H2200 mm -Weight: 308 kg Blodjgal A Ijpfx Aaqop