Used Infrared for sale (253)

Year of construction: 2014, condition: like new (used), Capacity approx. 60.000 kg bracket dimension approx. 463 mm Accuracy of the display capacity approx. +/- 0.03 % Smallest display digit 20 kg Digit height 50 mm Reading distance up to min. 60 m Power supply 12 V rechargeable battery Charger 12 V/4A with charging current limitation Crane scale equipped with: Gjdpfx Abed R Racsrjin - Single hook size 40 - single fixture - storage rack - charger - Infrared control for activating the balance functions - Integrated overload protection - Automatic switch-off, variably adjustable from 0-99 minutes

Condition: used, functionality: fully functional, Mettler Toledo ReactIR-4000 AUTOCHEM Spectrometer S-1206-0900A MCT Mid-Band Detector FTIR Analyzer Lab with S-1506-0001A Power Supply with Software. In situreal-time data collection- Investigate chemistry and processes in real-time, directly in reactor. Mid-infrared technology - Deduce reaction pathways, mechanisms and kinetics with the spectral information. ReactIRTMReaction Analysis Software - Determine reaction performance, conversion, completion. Analyze and monitor virtually all classes of chemical reactions. Sealed Optics - Operates safely in fume hoods, mounted either on bench top or wall. CompactTower Design - Preserves valuable lab space. Product Specifications: Gsdpjua Hdrjfx Abrjin Mid FTIR (4800 to 450 cm-1) analyzer Compact size Sealed optics Temperature stabilized Pinned in-place detector modules Good working condition. Please check out our other listings as well.

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock - price is for one unit only !!! Overall Dimensions - inches (mm): Model NU-5500/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Giedpfxjxbdyhs Abren Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Year of construction: 2022, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock. Price is for one unit only !!! Volume: 161 l Disinfection routine: Optional Oxygen control: 1 - 18%, 22 - 80% Giedpfxjxbilie Abron Access port diameter: 30 Data logger: Yes CO2 sensor type: Infrared Chamber: Copper-enriched stainless steel Inner glass doors: 4 Humidity alert and monitoring package: No Minimum temperature: 26 Maximum temperature: 50 Touch screen controller: Yes Active humidification: No

Condition: used, Year of construction: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Preforms are poured from a container into the feed hopper via a tilting device. From there, the preforms are fed out via an ascending belt with electronically controlled speed and are transported to the blow molding machine in a uniform orientation via a chute and loading star wheel. The shape and size of the preforms are checked and defective preforms are ejected before they are fed to the heating boxes via a mechanical star wheel. In the heating boxes, the preforms are preheated with infrared lamps. They are continuously rotated to ensure symmetrical heat distribution. Fans prevent overheating on the outside. Finally, the preform temperatures are checked using an optical pyrometer. Grippers feed the preforms to the blow wheel and remove them from it. The blow molding unit works with “crocodile molds,” in which expansion along the longitudinal axis is supported by a stretching rod. The preforms are then blown into PET bottles. The stretch-blown bottles are removed from the cavities by grippers and conveyed to the ejector. Additional title: rotational molding machine Capacity: 18000 bo/h Number of cavities: 8 pcs. Number of bottles to be ejected per stop: 202 pcs. Blow pressure: 30 bar Power: 58 kW Voltage: 400 V Frequency: 50 Hz Water: 4 bar Compressed air: 360 Nm3/h at 7 bar Weight: 16700 kg Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Gisdoxyktlopfx Abren Features: Preform feed hopper with tilting device for containers, inclined belt conveyor for preforms, preform inspection, heating boxes, blow wheel; bottle ejector; visualization on screen

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm Gedpfjxyf E Nox Abrein • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, controller manufacturer: Cybelec, controller model: DNC 1200, bending force (max.): 200 t, stroke length: 215 mm, number of axes: 6, type of crowning: CNC-controlled, power: 15 kW (20.39 HP), Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, upper tooling, Used high quality very accurate Edwards Pearson PR6 200/4100 6axis CNC Pressbrake for sale New / Year 2001 Model PR6 200/4100 Total axis: 6 axis complete with Crowning Gjdpfx Aox Avbyobroin Capacity: 4.1m x 200ton / 4100mm x 200ton Fully serviced Very late Pr machine before Bystronic pressbrakes Upper Euro Tool Clamps Complete with with: Cybelec CNC Control with Colour Graphics Y1, Y2, X, R, Z1, Z2 Max stroke 215mm Sick Infrared Lightguards Full set of Top and Bottom Tooling With crowning

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet Gedpjxwl T Usfx Abrein – Machine light

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: MILLPLUS iT HEIDENHAIN, table load: 800 kg, 5-axis simultaneous machining center! TECHNICAL DETAILS X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Gisdpoxwlgzsfx Abron Table size: 1,500 x 800 mm Table load capacity: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Spindle taper: SK 40 Tool changer: 60 positions MACHINE DETAILS CNC control: MILLPLUS iT HEIDENHAIN Total power consumption: 44 kVA Dimensions & Weight Footprint: approx. 3.5 x 2.65 x 2.65 m Machine weight: approx. 10.5 t EQUIPMENT B-axis (-120 / +30) NC rotary table integrated into fixed table Direct measuring system 3D probe infrared HEIDENHAIN TS 640 Coolant system 40 bar, 600 l Rinsing gun Chip conveyor 3D Quickset software Note: The machine is fully functional. The rotary table and X-axis produce noise.

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device Giedpfoxuad Aox Abron - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: good (used), Year of construction: 2002, HEIDENHAIN TNC 430 control Spindle speed 20–9,000 rpm Travels X = 500, Y = 400, Z = 400 mm Tool holder SK 40 16-station tool changer Rotary table with B and C axes Clamping surface Ø 700 x 500 mm Giedpfx Aewglfxsbrsn Max. table load 200 kg Infrared probe for workpiece measurement

Year of construction: 2022, condition: good (used), functionality: fully functional, machine/vehicle number: 919-313-239-i, For sale is a used thermography camera including protective housing. FLIR A400, Image Streaming, 42° Serial number: 91901277 Scope of delivery: - Cardboard packaging - Infrared camera with lens - Ethernet cable M12 to RJ45, 0.3m - Calibration certificate with login data ##### TOPA ML protective housing for FLIR A400/A500/A700 including 3" germanium window High protection class and chemical resistance: IP67 Giodpfxsx Ifafj Abron Rugged design made from anodised aluminium profile Vibration-resistant mounting with effective heat dissipation Dimensions: 96 x 96 x 227mm (W x H x L), excluding cable glands ##### Climate unit for TOPA protective housing with temperature monitoring and emergency shutdown Free-standing unit with high-performance pump, fans and radiator for continuous monitoring of camera temperature and water flow with emergency shutdown in the event of a fault. Typically, the system allows camera operation in ambient temperatures from -50°C to 200°C. The maximum distance between camera and climate unit is 20 meters. The height difference must not exceed 5.7 meters. The scope of delivery includes cables and hoses for a distance up to 3 meters. Includes: - Water cooling module for mounting on TOPA protective housing - Climate unit - 12VDC, 40W power supply unit for DIN rail mounting - 6m NBR hose (-20°C to +80°C continuous temperature) - 3m high-temperature cable with temperature sensor - 3m DC connection cable - 250ml coolant concentrate

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Mikron / GF HPM 450 U WPC with Pallet Changer About the machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, extensive equipment! Very low spindle hours! Technical data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45° / -120° - C-axis: 360° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of tool magazine pockets: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec. - Feed force X-Y-Z: 5 kN - Rapid feed X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Accessories: - 7 pallets, including 6 pallets with clamping devices (see photo) - Electronic handwheel - Infrared measuring probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-position pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction system - Tool blow-off device - Blowing air at the spindle carriage - Blowing air through the spindle center - Internal coolant supply 18–70 bar - Paper band filtration system - Chip conveyor - Spindle oil cooler Machine dimensions L x W x H: 6600 x 4000 x 2800 mm Weight: approx. 8,600 kg An inspection/test under power onsite is of course possible. We are not your average machine dealer – here, you will be advised by a CNC expert! We are happy to offer you transport, installation and setup, as well as commissioning and a machine training session, all performed by our own technicians. Everything from one source: Baumgärtner CNC GmbH & Co.KG is a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and other well-known manufacturers. Gijdpfx Abox Hx Rherjn We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur Gijdpfx Abswz I Aceren External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, rotational speed infinitely variable, DMG-MORI DMU 60 EVO linear Year 2014 Travel X/Y/Z: 600 mm x 500 mm x 500 mm Motor spindle SK40 with 18,000 rpm NC tilting rotary table, B and C axes Tool magazine with 60 stations Heat exchanger for spindle and table Dynamic package Control: Siemens 840 D SL with Shop-Mill Infrared probe Heidenhain TS 649 Gedpfx Aboxvhrwerein Blum laser tool measurement Scraper belt conveyor, HPC with paper band filter and 80 bar Oil mist emulsion separator Programmable coolant nozzles Electronic handwheel, mode 4 Turning and milling cycle

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer Gsdpfx Aexcp R Usbrein - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2016, x-travel 950 mm y-travel 850 mm z-travel 650 mm Control HEIDENHAIN TNC 640 spindle turning speed range 20000 U/min tool taper HSK-A 63 coolant IKZ 40 bar swivable table: 850 x 750 mm c-axis 360° tool change unit 60 Pos. weight of the machine ca. 14 t This DMG DMU 95 monoBLOCK is in very good condition and is available immediately: ACCESSORIES included: - 75 HSK-A63 chucks - Tool trolley - SCHUNK zero point system with: 1 base plate 4 interchangeable tables (plates) 1 vice plate 16 columns Technical data: Clamping surface table C-axis: 850 x 750 mm Clamping surface rigid table: 1,000 x 750 mm Control: 3D control HEIDENHAIN TNC 640 Spindle speed: 20,000 rpm Spindle power: 35 kW (40% ED) / 25 kW (100% ED) Tool holder: HSK-A 63 according to DIN 69893 Tool changing device: Double gripper Magazine slots: 60 (chain magazine) Gjdpfxsvwgrps Abrjin Connected load: 50 kVA Coolant system IKZ: 40 bar / 23 l/min through spindle centre (AD) External coolant supply: 4 bar / 40 l/min EQUIPMENT and DESCRIPTION - MPC Machine Protection Control chip tray with integrated coolant tank 500 l - Scraper belt chip conveyor with coolant system 600 litres, paper belt filter - Infrared measuring probe HEIDENHAIN TS 649 - 3D quickSET extension package - Coolant ring nozzle for vertical headstock, 15 water nozzles, 5 air nozzles - Flushing gun with pump 2 bar / 40 l/min - Cooling device Blast air through spindle centre, selectable via M function - Operating mode 4 - Manual intervention with open work area doors - Documentation

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, DMG-Mori DMU 60 Evo Linear Gisdpfx Aboxvhtnorsn Control: Heidenhain ITNC 530 HSCI NC swivel rotary table 600 mm x 500 mm B-axis swivel range: -5° to +110° C-axis 360°, including table cooling Spindle speed: 20 - 24,000 rpm, HSK 63 A Tool magazine with 120 positions Infrared measuring probe Renishaw OMP 60 Dynamic package, Laser tool measurement ICS with 40/80 bar, with paper band filter 980 l, chip conveyor Electronic handwheel, 3D Quickset ATC, programmable coolant nozzles via M-function Operating mode 4 Tropic package

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Gisdpswbqrtsfx Abron Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Find more new and used items in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm solid wood edges: 0,5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum length of workpiece: 120 mm Min. work piece width: 110 mm Anti-adhesive spraying unit: yes Edge preheating device: yes / with ceramic infrared lamp Godpfx Abol D Rx Uorein Bonding unit: granulat / Glue container quick-change kit Jack knife: yes Flush trimming unit: yes Corner copy unit: yes Flush radius milling unit: yes Radius scraper unit: yes Area scraper unit: yes Buffing unit: yes Cleaning spray unit: yes motor power: 5 kW machine length: 3774mm machine width: 1546 mm machine height: 1337mm weight: 842 kg

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Gijdpfx Asvakdzjbrjn Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Year of construction: 2007, condition: good (used), machine/vehicle number: 10369, Thermal CTP PT-R4300 E: Computer to Plate Recording System: External Drum 2 x SA-L4100 Single Autoloader: Fully Automatic loading of 50 Plates & automatic interleaf removal PST 26 Plate Stacker Bacher Punch 425 for PT-R4000 Godpefh Dm Nsfx Abrein ADARA TH 85: Cleaning and Gumming unit for chemistry-free thermal CTP Plates Technical Details: Throughput option (plates/h in max. format) : 10 Plates / Hour Light Source: 16-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Resolution : 2,400 - 2,438 - 2,540 dpi Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Year of construction: 2005, condition: good (used), machine/vehicle number: 756, Thermal CTP PT-R4300 (Computer to Plate) Recording System: External Drum PST 26 Plate Stacker Glunz & Jensen Interplater MP 85: Thermal Plate Processor Technical Details: Godpfofh Dmzox Abrsin Throughput option (plates/h in max. format) : 20 Plates / Hour Light Source: 32-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Condition: used, Year of construction: 2003, The Macchi 3-Layers is a high-capacity blown film co-extrusion line intended for production of general-purpose films with high width and output demands.It processes LLDPE, LDPE, mLLDPE, MDPE, HDPE, and in upgrade configuration also PP.The system uses a 700 mm 3-layer die head and reaches an output capacity of up to 900 kg/hour, depending on formulation. EXTRUSION GROUP: Gjdex Akywspfx Abrsin • Extruders: 80 mm + 100 mm + 80 mm • Infrared heating • Hydraulic screen changers Detailed upgrade specification: • One extruder Plastex 100/30D (middle layer B) • Two extruders Plastex 80/30D (layers A and C) • Bimetallic barrels • Nitrided screws • Water-cooled grooved feeding sections • 5 heating zones with IR heaters and blowers • Motors: - 150 kW DC motor (100 mm extruder) - 100 kW DC motors (80 mm extruders) • AC motor application with digital control (IP55) for reduced energy consumption and harmonic distortion DIE HEAD: • Model TE505 • 700 mm die diameter, die gap 1.8 mm • 4+4 heating zones with ceramic heater bands (19 + 35 kW total) • Mounted on a die cart with integrated air distribution manifold • Insert range 600–800 mm • Equipped with IBC system COOLING SYSTEM: • Dual-lip carbon fibre Karat air ring (K-Design) • ASR4 Double Flux Cooling Ring, blower 15 kW • Jet-7 IBC cooling control system - 15 kW introduction blower - 18 kW extraction blower - Bubble diameter sensor - Air balancing valves - Variable-speed inverters TAKE-OFF UNIT: • Take-off width: 3200 mm • Oscillating nips • Optional tower-mounted secondary nip with load-cell control WINDING SECTION: • Double automatic back-to-back winder • Automatic roll change • Maximum winding width: 3150 mm FILM SPECIFICATIONS: Film width range with 700 mm die: 2000–3100 mm Thickness: 15–200 μm Output example: 3000 mm width, 100 μm LDPE → 800 kg/h ±10% LINE SPECIFICATIONS: Installed power: 550 kW, 415 V, 3-phase + neutral Screw speeds: 80/30D extruders: 0–130 RPM 100/30D extruder: 0–120 RPM Cooling water consumption: 6 L/min Compressed air requirement: 6 bar ADVANCED CONTROL & MEASURING SYSTEMS: • Doteco gravimetric dosing system Grado • Thickness profile systems (EC Plus modules): - S2 Automatic Die Control - S3 Rotating Capacitive Thickness Scanner - S4 Track Scanner - Q1 Serial communication (extruder/gravimetric values) - Q11 Printer module - Q12 Online modem diagnostics - Q7 Power consumption monitoring • K-Design VARIOcool automatic thickness control • Kundig reversing ring and thickness measurement AUXILIARY EQUIPMENT • Tower • E+L web guiding system • Corona treater AFS or 2800 station • Calibrating basket with optional supporting basket • Bubble guide GSRC 3200 (6 levels, motorized, IBC-linked) • Micro-perforation system (FBF cold needle) • Air shafts (8 pcs)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, operating hours: 10,000 h, CNC controller: HEIDENHAIN iTNC 530M Axes X-axis travel mm: 700 Y-axis travel mm: 420 Z-axis travel mm: 610 Feed rates m/min: 1 - 20 Worktable Table dimensions mm: 1.260X490 Spindle Spindle speed rpm: 50 - 20.000 Tool system Tool holder: SK30 Tool magazine slots: 32 Equipment 3D infrared measuring probe Coolant system 3 bar / 30 l/min Oil mist extraction system Minimum quantity lubrication system with 2-fold metering device FEHLMANN HSC settings (cycle 327) Laser tool measurement for measuring tool length and diameter (BLUM) Machine running times Spindle Working: 10.000 Giedpfx Abevrd Htsrsn Basic machine dimensions / weight Length mm: 2.500 Width mm: 2.560 Height mm: 2.700 Weight kg: 5.100