Used Ink Mixing System for sale (42,749)

Condition: used, Year of construction: 2012, machine/vehicle number: 02 13 2202, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, volume flow: 16,000 m³/h, suction capacity: 16,000 m³/h, actuation type: electric, Equipment: CE marking, documentation/manual, Industrial dust extraction and filtration system, built in 2012 by the Italian company SILVI & C. S.r.l. The system is complete with a 22 kW fan, cartridge filtration system, automatic filter cleaning using compressed air, control panel, and STS CO₂ fire suppression system. Technical specifications: Manufacturer: SILVI & C. S.r.l. – Italy Year of manufacture: 2012 Serial number: 02 13 2202 Airflow rate: 16,000 m³/h Static pressure: 350 mm H₂O (approximately 3,430 Pa) Electrical power: 22 kW ATEX classification: II 3D – Zone 22 – T 150 °C CE marking Electrical supply: 400 V Equipment: 22 kW industrial fan Cartridge filtration system Automatic compressed air filter cleaning system TURBO electronic control unit for filter cleaning management Main electrical panel with controls and protections STS CO₂ fire suppression system Dcjdpfx Akj Ahrk Nj Ajp Two lower containers for dust collection Inspection and maintenance access doors Condition: Used system, functional and complete with fan. Machine manual and electrical diagram dated December 2012 are available. Further information and photographs available upon request. Transportation not included. Any dismantling and loading operations will be agreed upon separately.

Year of construction: 2022, operating hours: 7,200 h, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, Component A and Component B The dispensing head has been expanded with a Y-shaped slider. - Manual adjustment mechanism for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for Comp. A + B - Material pressure tank 50 l for Comp. A - Level monitoring for Component A + B - Material recirculation to the dispensing pump for Comp. A and B - Material evacuation for Comp. A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Workbench approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, Component A Deds Ahp A Rspfx Ak Ascp - Transfer station for bung drum, Component B - Dispensing control system (Siemens PLC control based on S7-300) - Precision piston dispensing pump for Comp. A and B - EKDP A, Component, 257 ccm - EKDP B, Component, 64 ccm --> 1 x spare EKDP A and EKDP B are included. These have been reconditioned by Rampf as an exchange part. (see image)

Condition: excellent (used), mileage: 351,844 km, first registration: 01/2019, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,400 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fridge, navigation system, power mirror, = Additional Options and Equipment = - Aluminum fuel tank - Brake booster - Low noise - Speed limiter - Tipping hydraulics - Air suspension - Air horn - Sleeper cab - Sun visor - Stability control - Power take-off (PTO) = Further Information = Transmission: I-SHIFT, automatic Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 9,752 kg Technical condition: very good Visual condition: very good VOLVO FH 460 6X4 Tractor Unit EURO 6 L PACKAGE, 460 HP DRIVE 6X4 PLANETARY AXLE AIR SUSPENSION WHEELBASE 340 CM Dodpfjuxxt Esx Ak Ajcp FH GLOBETROTTER CAB OPTIONS: - AIR CONDITIONING (CLIMA) - NAVI - REFRIGERATOR I-SHIFT AUTOMATIC TRANSMISSION LED HYDRAULIC CONNECTIONS LARGE DIESEL TANK 500 LITERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: excellent (used), Year of construction: 2000, For sale is a Höcker Polytechnik Vacumobil system. The unit is fully functional and can be inspected and tested on site. The sale is carried out on behalf of a customer. Machine location: Friedeburg region. Machine details: - Year of manufacture: 2000 - Extraction diameter: 300 mm - Motor power: 7.5 kW - Nominal air flow rate: 5320 m3/h - Mobile on castors Price is net, plus VAT. An invoice for the machine will be issued. Shipping of the machine can be arranged at additional cost. Feel free to contact us with any questions or if you are interested! Your JG Holztechnik Team from 26188 Edewecht. Dcedoylciwopfx Ak Ajp

Condition: good (used), mileage: 936,928 km, power: 368 kW (500.34 HP), first registration: 11/2013, fuel type: diesel, tire size: 385/65, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: black, gearing type: automatic, number of gears: 16, emission class: euro5, suspension: other, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, retarder, traction control, trailer coupling, = Additional Options and Accessories = - 2-pedal control - Adaptive cruise control - Aluminum fuel tank - Remote-controlled central locking - Intarder - Tilting hydraulics - PTO Dsdpfs Ahtzhsx Ak Aecp = Further Information = Transmission: Opti Cruise, 16 gears, automatic Year of manufacture: 2013 Front axle: Tire size: 385/65; Steered; Tire tread depth left: 70%; Tire tread depth right: 70%; Brakes: Disc brakes; Suspension: Parabolic spring suspension Rear axle: Tire size: 315/70; Double tires; Differential lock; Tire tread depth left inner: 55%; Tire tread depth left outer: 55%; Tire tread depth right inner: 55%; Tire tread depth right outer: 55%; Suspension: Air suspension Number of cylinders: 8 Technical condition: good Optical condition: good Please contact Maarten Busser or Niels Busser for further information.

Condition: used, Year of construction: 2012, This MIWE Thermo Express rack oven system consists of 2 ovens, each with 9 racks, thus offering excellent capacity for medium-sized bakeries. The ovens are heated with thermal oil, which provides excellent baking quality that is unparalleled. The ovens also have an automatic loading and unloading system, making baking a breeze. consisting of: 2x MIWE Thermo Express rack ovens 9 racks per oven Total baking area: 68.4 m² MIWE Athlet B330S automatic loading and unloading system Dsdo Ahwvbjpfx Ak Aecp Including exhaust system at the loader Central control unit Heating boiler central unit HKZ350

Condition: excellent (used), mileage: 525,445 km, power: 265 kW (360.30 HP), first registration: 10/2004, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro3, number of seats: 2, total length: 9,190 mm, Equipment: ABS, crane, electric window regulation, retarder, = Additional options and accessories = - Lift Axle - Radio/CD player - Steering Axle = Remarks = Crane Number of hydraulic extensions: 2 Number of support legs: 2 Load Hook: × Meter capacity: 8 m Capacity kilo: 5580 kg = More information = General information Number of doors: 2 Year of construction: 2004 Cab: single Registration number: 1RNL674 Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 12.760 kg Carrying capacity: 13.240 kg GVW: 26.000 kg Functional Crane: FASSI F 130 A, behind the cab Extendable superstructure: Yes Dsdpfx Ajzvq Egek Ascp Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 525,445 km, power: 265 kW (360.30 HP), first registration: 10/2004, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro3, number of seats: 2, total length: 9,190 mm, Equipment: ABS, crane, electric window regulation, retarder, = Additional options and accessories = - Lift Axle - Radio/CD player - Steering Axle = Remarks = Crane Number of hydraulic extensions: 2 Number of support legs: 2 Load Hook: × Meter capacity: 8 m Capacity kilo: 5580 kg = More information = General information Number of doors: 2 Year of construction: 2004 Cab: single Registration number: 1RNL674 Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 12.760 kg Carrying capacity: 13.240 kg GVW: 26.000 kg Functional Crane: FASSI F 130 A, behind the cab Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 Djdpfx Aezvq E Tok Ajcp EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, RMS RMS Control and Measurement Technology – Vibration testing system with accessories For sale is a high-quality set from RMS Control and Measurement Technology, as well as a fan from Rietschle, ideal for vibration testing, resonance tests, and material analysis. Included devices: RMS CONTROL AND MEASUREMENT TECHNOLOGY – Vibration exciter, type SW 6011, No. 2230 30 V – 200 A 13 mm / 1.2 m/sec / 100 g Mounting frame, type SWT 6211/1, No. 6074 – stable mounting for test objects Power amplifier, type TGE 10‑1/7 – for optimal control of the vibration exciter Rietschle SKG 410‑2.01 fan – high-performance vacuum/pressure blower Condition: used Dedozikdcjpfx Ak Aocp Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Dcjdpfx Aszimaask Ajp Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, Dsdozixy Sopfx Ak Aecp the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Krumm Tec CLEAN MATIC 3150 cleaning system for support material Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), mileage: 252,835 km, power: 74 kW (100.61 HP), first registration: 04/2018, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, wheelbase: 3,060 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 2, total length: 4,910 mm, total width: 1,800 mm, total height: 1,840 mm, loading space length: 1,960 mm, loading space width: 1,430 mm, loading space height: 1,190 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 697 kg, Curb weight: 1463 kg, Gross vehicle weight: 2160 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 1300 kg, Tow hitch, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 4, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Silver, Metallic, Rear view camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 74 kW (99 hp), Number of cylinders: 4, Displacement: 1499 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Body type: Extended, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat covering: Fabric, Seat adjustment: Manual, Air conditioning, Navigation, Parking distance control, Tow bar, Spare wheel, Tire type: Summer tires = Additional Information = General information Number of doors: 1 License plate: V-914-NP Axle configuration Tire size: 205/60R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 1,463 kg Payload: 697 kg GVW: 2,160 kg Functional Loading area height: 57 cm Maintenance APK (Periodic Vehicle Inspection): Valid until 04.2027 Dcjdoz Rv Egjpfx Ak Aep Condition Technical condition: Good Optical condition: Good Damage: None Number of keys: 1

Year of construction: 2023, condition: used, Welding System Manufacturer: TRASKO Type: CMT 1 Year of manufacture: 2023 Control system: Siemens Technical data: Dcsdpfxszbvnfe Ak Asp - Voltage: 400 V, 50 Hz - Current: 63 A Technical features: - Robotic MIG welding of individual components onto a cooling plate - Automatic torch cleaning and wire cutting - Rotary table with 2 stations for loading/unloading during the welding process In our assessment, the robotic welding system is in mint condition. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser Dcodpozdqkrjfx Ak Asp The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) Dsdpfxezdn T Rs Ak Aocp We will gladly answer any further questions you may have over the phone.

Condition: used, Bosch Type: XR31-3 Dcodpfx Akezdrzre Aep Description: Delta pick and place robot Manufacturer: Bosch Product type: Sigpack Systems XR31-3 Designation: Delta pick and place Year of manufacture: 2008 Pads/cycle (min): 185 Max. acceleration (g): 0.455 Cycle time (s): 0.32 Working area (mm): 48 x 9.2 Maintenance rate: None Assembly time (h): 2.5 Scope of supply: 1 x Delta robot XR 31-3 Manz operating panel pendant P51 1 x Rotary gripper Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, TOX Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Dcsdpfxezdtffe Ak Aep Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mount DIN 69871 ISO 50 Overhang 358 mm Max. speed range 3000 rpm Max. drive power 22 kW Mounting flange: Outer diameter Ø 306 mm Dimensions L x W x H 460 x 306 x 360 mm Weight approx. 150 kg Dcedpfx Akoz Adz Is Ajp Accessories / Special features: • 2 pivoting axis system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling and panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 2 weeks after order receipt The following work will be carried out during the partial overhaul: - 1 new gear pair - 1 new gear shaft - New bearings for the milling spindle and the gear shafts - New seals for the milling spindle and hydraulic tool clamping - New paint job The image is similar and shows a milling head that has already been overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, Keysight Mixed Signal Oscilloscope / Digital Storage Oscilloscope Keysight / Agilent InfiniiVision MSO-X 3034A 350 MHz Mixed Signal Oscilloscope with 4 analog channels, 16 digital channels, and 4 GSa/s sampling rate For sale is a used Mixed Signal Oscilloscope from the manufacturer Keysight Technologies / Agilent Technologies. The device is suitable for precise signal and measurement tasks in development, laboratories, service, training, research, as well as industrial electronics and quality assurance. Technical data Dcsdezh I Dwepfx Ak Aep Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog channels: 4 Digital channels: 16 Max. sampling rate: 4 GSa/s Display: Color display MegaZoom technology Inputs: 4x analog BNC inputs Digital input / Logic connector USB port USB Device / USB Host Trigger Out Ext. Trigger / Calibration connector Power connection: 100 - 240 V AC 50 / 60 Hz Power consumption: max. 100 W Dimensions: approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels USB interfaces Trigger functions Analysis functions Measurement functions Storage and printing functions Carrying handle Accessories as shown in the pictures Application areas Electronics development Laboratory Service Troubleshooting Signal testing Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3x probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Device can be switched on Display and operation appear to be functioning properly Test seals / stickers as shown in the pictures are present Weight: approx. 4 kg The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: Dsdpfxsztvwis Ak Ajcp - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Interlocked safety guarding Dedpfx Aksz Iz Sfs Ascp Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Air requirement: 4.1–7 bar

Condition: used, VETTER Crane Technology PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist. For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI crane system as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,100 mm Support distance L: 5,590 mm Support distance B: 5,100 mm Beam length: 6,170 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Bottom edge of crane bridge: 4,145 mm Bottom edge of portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/36/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Djdpfez Sn Ddox Ak Ajcp Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Travel unit / trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Steel support and beam construction Inspection book available EC declaration of conformity available Documentation available Accessories according to pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Longest component: approx. 6.2 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of delivery VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam construction Floor control / operating elements Main switch Inspection book EC declaration of conformity Documentation Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. Dodpfxjz Srm No Ak Aocp The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), mileage: 229,090 km, power: 55 kW (74.78 HP), first registration: 03/2015, fuel type: diesel, tire size: 195/65R15, axle configuration: 4x2, wheelbase: 2,730 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro5, number of seats: 2, total length: 4,380 mm, total width: 1,810 mm, total height: 1,800 mm, loading space length: 1,760 mm, loading space width: 1,500 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 666 kg, Tare weight: 1269 kg, Gross vehicle weight: 1935 kg, Unbraked towing capacity: 680 kg, Braked towing capacity, center axle: 995 kg, Cab type: Single cab, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Lighting type: Halogen lamp, Engine power: 55 kW (74 hp), Number of cylinders: 4, Engine displacement: 1560 cc, Fuel: Diesel, Euro: 5, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, air conditioning, side door, spare wheel, Tire type: All-season tires = Additional Information = General information Number of doors: 1 License plate: VN-057-K Djdpjz S Ag Tjfx Ak Ajcp Axle configuration Tire size: 195/65R15 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 1,269 kg Payload: 666 kg GVW: 1,935 kg Functional Loading area height: 58 cm Maintenance APK (Technical Inspection): valid until 03/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1

Condition: used, Year of construction: 2015, Moretto OTX 360VP_drying hopper system (2015) Professional industrial drying hopper Moretto OTX 360VP designed for efficient pre-heating and drying of plastic granulates. Equipped with an integrated air heater and suction valve, this compact unit ensures optimal moisture removal and consistent material flow prior to injection moulding or extrusion processes. Technical Specifications: 1. Manufacturer: Moretto S.p.A. (Italy) Dcodpo Af Na Hefx Ak Aop 2. Hopper Model: OTX 360VP 3. Serial Number: OP. Year of Manufacture: 2015 5. Hopper Capacity: 360 litres () 6. Dry Weight (Hopper): 133 kg Integrated Components: 1. Air Heater Unit: 2. Model: Moretto HG3V90X 3. Serial Number: 1515357 4. Heating Power: 3.1 kW 5. Voltage / Frequency: 230 V / 50–60 Hz 6. Heater Weight: 20 kg 7. Suction Valve: 8. Model: Moretto AVIC50 9. Serial Number: OP. Valve Weight: 3.12 kg