Used Inspection Machine for sale (71,446)

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: Specification Value Manufacturer X-TEK Systems Ltd., England Model RTR160UF Type Ultra Focus X-Ray System Max. X-ray voltage 160 kV Bsdezl Scrjpfx Ap Esdf Max. power 60 W Focal spot size 5 (Ultra Focus) Manipulator 50 kg, 5 axes Power supply 230 VAC, 50/60 Hz Serial number RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, likely designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Bdjdpfxozhw S Rj Ap Eef

Year of construction: 1990, condition: ready for operation (used), A fabric inspection machine is offered. Working width: approx. 2000mm, display: digital length counter, inspection table: integrated backlight, control: conventional via control cabinet, function: winding, unwinding and inspecting fabric webs, control: conventional. Equipped with illuminated transmission screen, digital meter counter, control cabinet with push-button control, guide and winding rollers. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 2800mm/1600mm/1900mm. Inspection possible by arrangement. Bjdpfx Apozcfizo Eodf

Year of construction: 2026, condition: new, functionality: fully functional, Flexor 440IS with EyeC ProofRunner Web 450 print image inspection system and REA-JET HR 4K printing system. Bodewkt D Depfx Ap Eodf The Flexor 440IS is the ideal fully integrated 100% inspection solution. The 440IS machine allows the operator to inspect a web width of up to 440 mm and remove defects. The machine offers flexibility and high performance demanded by customers with the highest quality standards. High-speed inspection, low maintenance costs, and full integration of the 100% inspection camera provide converters with a package that exceeds all expectations. The offer price is exclusive of camera and inkjet unit. These can be selected according to customer requirements and preferences. Have we sparked your interest? We would be happy to assist you!

Condition: used, SPECOLA - FABRIC INSPECTION MACHINE TECNOTEAM USED, WORKING WIDTH 190 CM, TOP LIGHTING Bsdpfxox A Inle Ap Esdf

Condition: used, Year of construction: 2022, Koh Young Machine AL-SL-00713 Bdodpfxjx Tzhpe Ap Ejf 1. LZALPHA L-S-20-4W-L-6.5M  1  AL-SL-00713 Zenith Alpha HS L-Size Single Lane 4W/8M L→R 20um L (Lean) Platform Platform: L (Lean) Platform (standard version) Type: Zenith Alpha, L-Size Camera Resolution: 20 microns Projection: 4-way grating projection Camera: 6.5 Megapixels Illumination: IR-RGB LED Operating System: Microsoft Windows 10 IOT Enterprise LTSC (Standard) Conveyor: Single lane Conveyor Type: Front fixed (Standard) Conveyor Belt Type: Timing belt - ESD (Standard) Conveyor PCB Transfer Height: 870–950 mm (Standard) Conveyor PCB Direction: L→R (Standard) Max. PCB Size: 490 × 510 mm (front fixed, Standard) Min. PCB Size: 50 × 50 mm PCB Thickness: 0.4–5 mm ESD: Standard + Extended Safety Option CE Declaration: English (Standard) Specification conforms to standard setup System Dimensions (W×D×H): 1000 × 1295 × 1627 mm HS Code: 9031.4990 Country of Origin: Republic of Korea 2. 803020-009105  1  to AL-SL-00713 AOI REVIEW STATION (REVIEW STATION SET, WINDOWS 10) Includes DELL XE3 PC with Windows 10, monitor, and keyboard HS Code: 8471.4900 Country of Origin: People's Republic of China 3. 101020-003007  1  to AL-SL-00713 UPS OPTION AOI_SPI (SMT750) APC – C-platform HS Code: 8504.4030 Country of Origin: Philippines

Year of construction: 2018, condition: ready for operation (used), An optical inspection machine Göpel for the inspection of THT components, THT solder joints and wave-soldered SMD components is available. Component clearance: 120mm, max. component height top/bottom: 80mm/10mm, max. inspection dimensions X/Y: 540mm/450mm, max. workpiece dimensions X/Y: 620mm/510mm, inspection speed: approx. 100cm²/s, machine dimensions X/Y/Z: approx. 1200mm/1400mm/1800mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Bjdpfjy Aafljx Ap Esdf

Condition: good (used), Year of construction: 2006, Stork FIM NT12+ HD Final Inspection Machine Poultry Manufacturer: Stork Bedpfx Asv Hx Nfop Esdf Model: FIM NT12+ HD Year: 2006 Number of units: 12 Capacity: 8000-9000 BPH Machine Dimensions LxWxH: 1.365x1.205x2.750 mm Machine Weight: 750 kg.

Condition: ready for operation (used), Year of construction: 2013, A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Bdedpfx Aoxqgxrsp Ejf

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Bdjdstz Dkyopfx Ap Ejf

Year of construction: 2011, condition: ready for operation (used), Various laboratory devices are available for quality testing in the textile industry. 1) Textile tensile tester Textechno FPA ME, year of manufacture: 2000, max. speed of pull-off clamp: 5000mm/min, clamping dimensions X/Y: 46mm/10mm, clamping pressure 3bar/5bar/8bar: 1200N/2000N/3200N, max. clamping distance: 960mm, force transducer: E 10N/E100N/E1000N, accuracy: +/-1%, machine dimensions X/Y/Z: approx. 885mm/700mm/1730mm, weight: approx. 200kg, control: Textechno Bus. 2) Illuminated table White Screen Normlight, lighting: 3x 36W, machine dimensions X/Y/Z: approx. 1250mm/800mm/850mm. 3) Textile length measuring machine Yuan More YG086, year of manufacture: 2011, measurement: linear yarn density, yarn count: 1-6, frame circumference: 1000mm (+/-1mm), frame speed min./max.: 30r/270r/min, max. yarn frame turns: 9999, yarn traverse stroke: 35mm (+/-0.5mm), single yarn tension range: 0cN-100cN, machine dimensions X/Y/Z: approx. 850mm/680mm/550mm, weight: approx. 50kg. 4) Digital microscope Di-Li. 5) Light box Just color Viewing Light. 6) Cardwinder Graf & Co CCW15. Documentation available. On-site inspection is possible. Bedpfsuanrwjx Ap Ejdf

Condition: ready for operation (used), Year of construction: 2021, An automatic Gise inspection machine for nails is available. Inspection method: image processing system, camera system: Keyence CV-X300F, throughput: approx. 60nails/min, detection accuracy: 98%, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1100mm, weight: approx. 150kg, control system: Siemens S7-1500. Including segmented conveyor. Documentation available. An on-site inspection is possible. Bdjdpfxeyarqae Ap Eef

Condition: used, functionality: fully functional, BREVETTI CEA CARTRIDGE INSPECTION MACHINE, MODEL K32-400 Automatic inspection machine for the presence of bubbles, cap defects, stopper defects or wrong position in cartridges. With three inspection units for checking for particles. CHARACTERISTICS Height of infeed/outfeed: 900 +/- 25 mm AVAILABLE FORMAT PARTS - For containers: with a diameter of 8 to 52 mm and a height of up to 150 mm - For cartridges: Ø 8.65x63 mm and Ø 8.65x76 mm PRODUCTION -Output: up to 400 cartridges/min Bedpfjxzupgox Ap Esdf ENERGY CONSUMPTION - Electricity: 400V, 50/60Hz, 3Ph - Power: 8 kW - Compressed air: 5 bar DIMENSIONS - Size: 2400 x 2600 x 2440 mm (approx) - Net weight: 2800 kg (approx)

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, Bdsdpfx Aozqr Hnop Ejf 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11876, travel distance X-axis: 1,524 mm, travel distance Y-axis: 596 mm, travel distance Z-axis: 584 mm, quill travel distance: 127 mm, quill diameter: 105 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 40 rpm, table width: 355 mm, overall weight: 3,750 kg, table load: 850 kg, XYZ SMX 5000 CNC Bed Type Milling Machine Model: SMX 5000 S/No.: 11876 Year: 2013 Control: ProtoTrak SMX Table Size: 1930 x 355mm Travels (X,Y,Z axis): 1524 x 596 x 584 Quill Diameter: 105mm Bdsdpfjznkkaox Ap Esf Max. Quill Travel: 127mm Spindle Taper: 40 ISO Spindle Speed Range: 40 – 5000 RPM Spindle Motor Power: 7.5 HP Max. workpiece weight: 850 kgs

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: Bedpfx Aszgwq Dop Eedf X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Quill Travel: 140 mm TABLE: Length: 1,930 mm Width: 356 mm T-Slot Width: 15.9 mm Maximum Table Load: 850 kg SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive HEAD: Head Tilt Left: 45° Head Tilt Right: 45° CONTROL: ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Bdjdpfx Aszmyzfop Eef

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Bdodpfx Aeyhdi Rop Eef Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) Bdsdpfsznwu Sox Ap Eef - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha Round Corner Machine Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Bedpfeyzi Iajx Ap Eedf

Condition: good (used), ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Bodozl S T Rjpfx Ap Ejdf Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope.

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Bdsdpfx Ajzlgbpep Eof Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min Bodpfx Apjzlaims Ejdf High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit 2 knives 1 side cassette after the knife Additional veneer cassette. Sound insulation on all units MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work.

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Motor: 2.2 kW Equipment: Bdodpfozlahiox Ap Eef – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Bsdpfxezb Ipzj Ap Ejdf Z axis travel 1650mm 1750 mm between centres Coolant pump and tank