Used Kreissaege Feed for sale (14,276)

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg Crjdehhf Abspfx Ah Uji

Year of construction: 2004, condition: used, Ottevanger C5 Containerized Feed mill Automated grinding-mixing line with a capacity of about 5 t/h. Crsdpfx Aeq Hr Rzeh Usi Includes the following components, among others. - 55kW Hammer mill 650-375 - 11kW 1000L Mixer PM1000 - Silos - Bucket weigher - Dosing screws - Elevators - bunkers - Switchgear cabinets

Condition: good (used), Year of construction: 1995, 1 used center lathe Make MCM Type TC 300 x 2000 Year of manufacture 1995 Technical specifications: Center height 300 mm Turning diameter 600 mm Center distance 3000 mm Bed width 400 mm Crjdpfx Ahevzllco Uoi Spindle bore 82 mm Spindle nose Spindle speeds (24) 9 - 1600 rpm Motor power 7.5 kW (option: 9.2 kW) Z-axis feed X-axis feed Metric thread Witworth thread Module thread Diametric pitch thread Cross slide LxW 660 x 230 mm Cross slide stroke 340 mm Top slide LxW 350 x 150 mm Top slide stroke 150 mm Tailstock taper MK 5 Equipped with Three- and four-jaw chuck Multifix head with various inserts Chip tray Steady rest Technical specifications. Errors excepted. This machine comes from a company that exclusively processed plastic and is in excellent condition.

Year of construction: 2012, condition: excellent (used), 1 used feed water tank ----- cylindrical, horizontal on saddle feet, insulated with degaser capacity approx. : 5.900 ltr max. allow. work. pressure : 0 / + 6 bar Crsdpfxemfq Rke Ah Uji max. allow. work. temp. : 0 / + 200°C year of construction : 2012

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, pressing force: 25 t, filling opening width: 800 mm, filling opening length: 1,050 mm, bale width: 900 mm, bale height: 800 mm, input voltage: 400 V, noise level: 85 dB, power: 18.5 kW (25.15 HP), volume flow: 160 m³/h, Bollegraaf HBK25 offered in Cyprus. The machine is in good condition and includes a floor conveyor belt. The machine is immediately available. Technical specifications of the baler: Drive: 18.5 kW Crsdpfx Ajxbdgueh Uoi Bale size: 800 x 900 x adjustable Feed hopper dimensions: 1,050 x 800 Press force: 25 tons Capacity: 160 m3/hour (depending on material) Technical specifications of the conveyor belt (approximate): Length on floor: 3,000 mm Diagonal length: 5,000 mm

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Lead Screw and Feed Rod Lathe Weiler Commodor Partially Overhauled Item number: 04-03-117 Manufacturer: Weiler Very good overall condition Machine partially overhauled Delivery time: on request – subject to prior sale Technical Details: Year of manufacture: approx. 1991 Dimensions (L x W x H): approx. 2200 x 1200 x 1800 mm Csdewf Dhpspfx Ah Usri Weight: approx. 1500 kg Digital Readout: 3-axis digital readout Sino New Capacity: Max. swing over bed: approx. Ø380 mm Max. swing over cross slide: approx. Ø190 mm Max. turning length: approx. 1000 mm Bar capacity: approx. Ø56 mm Spindle: Speed range: approx. 25–2000 rpm Spindle nose: A2-6 Drive power: approx. 4.0 kW Automatic longitudinal and cross feeds: Feed range: approx. 0.011–0.80 mm/rev Thread Cutting Capabilities: Metric threads: 0.30–10 mm Inch threads: 80–2 3/4 TPI Diametral pitch threads: 80–5.5 DP Module threads: 0.2–5 Tailstock: Taper: MT4 Accessories: 3-axis digital readout SINO New 3-jaw chuck 200 mm New Quick-change toolholder size B + 1 insert Bed stop Work light New Coolant system New Complete documentation Emergency stop (E-Stop) Various chuck keys Machine feet Electrical chuck guard New Leadscrew and feed rod cover New Optional Accessories: Drill chuck Live center Collet chuck 173E Collet set 173E Additional quick-change toolholders Further accessories available on request. Price and further technical details available upon request.

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Passage: Ø 103 mm Csdeg I D N Ijpfx Ah Usri -Hole circle: Ø 195 mm -Weight: 56 kg

Condition: used, Hydraulic feed gear suitable for Harbs woodworking machines or similar. The gear allows for manual, stepless adjustment of the feed or gear speed. Crsdpfewktmrsx Ah Uoi

Condition: new, Motor power 1,1/2,2 kW belt opening 130 mm belt dimensions 350x32x2,5 weight 220 kg Credpfocgrkyjx Ah Uei Speed 30/60 1/min. Cutting surface 0° 115 / 100 / 130x80 Cutting surface 45° right 100 / 85 / 90x80 Cutting surface 45° left 75 / 75 / 90x65 Cutting surface 60° right Cutting surface 60° left Description Manual crosscut saw for miter cuts from 45° right to 45° left, with high sawing power. Construction in sturdy cast iron, practical and safe for every cut. FALCON 352 is available in bench version or on stand (accessories). The machine is equipped with a two-speed - three-phase motor. On request, the machine is supplied with pneumatic vice (FALCON 352 MA, when the head is lowered, the vice closes automatically) This version is always supplied with stand. Basic equipment: clutch adjustable from the outside Blocking device with vice Sliding on prismatic guide with adjustable bar Fixed clamping of the vice with axial adjustment for clamping the workpiece in the immediate vicinity of the cutting line. Adjustable fixing of the degasser, made entirely of steel. Electric 48 V coolant pump for cooling and lubrication of the saw blade. Double spring for the return of the to fix the loading platform. The machine can be lifted. Endless worm shaft mounted on pair of bearings. Saw blade holding shaft mounted on off-center punch. 2 speeds 30 and 60 rpm. Vise opening 130 mm Machine is supplied without saw blade. Electrical equipment: Electrical control panel marked cable connections main safety switch provided for padlock Emergency stop device Phase failure protection Speed changeover switch Thermal magnetic protection Undervoltage release Motor with IP 54 protection Low voltage system 24 Volt Electric coolant pump 48 V Motor 1,1/2,2 kW - 400 Volt For further technical data please refer to the attached PDF document.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 60176, New pneumatic self feed drill unit with 2 signal transmitters and their holders good for drilling or milling Speed (r.p.m. no load): 32,000 rpm Stroke: 40 mm dashpot: 15 mm Motor power: 0.25 kW Total length: 10.63 In. Operating pressure: 5.5 bar lubricated compressed air Suitable for collets (not included) with diameters of 3 to 8 mm Included are 2 signal transmitters (24 V DC, M8 connector, 5 m cable) and holders Other versions (speeds, stroke, etc.) are available upon request. Cedjv Tnh Repfx Ah Ujri

Condition: used, Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm Credpfxod S Rfqj Ah Uji -Hole circle: Ø 230 mm -Weight: 24 kg

Condition: used, * suitable for HARBS or similar, * d=30mm, * D= approx. 125 mm, * W= 50mm, * Groove=8 mm, Cjdpfx Ahelf Ndas Uori * 9 pieces in a set.

Condition: new, MAXION UNIMAX 3 AV pillar drilling machine Modern, precise production drilling machine based on the proven UNIMAX3 concept, with infinitely variable feed drive, automatic tool ejector and chip breaking control as standard, reversing switch right/left rotation. Feed rate, speed and drilling depth are shown in the display and the drilling depth is programmed. Technical data: Continuous drilling capacity in St 60 25 mm Drilling capacity normal 30 mm Tapping capacity M 20 spindle MK 3 drilling depth 125 mm throat 260 mm distance spindle/table 90 to 840 mm table surface 500 x 400 mm column diameter 110 mm total height 1.900 mm weight 280 kg motor power 0,8/1,5 kW Spindle speed infinitely variable Crjdpfx Aegv I U Soh Uji range A 80-1.440 rpm Range B 180-3,200 rpm details see data sheet enclosed - please ask for further models

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: EL1018 -Number: 7 pieces available -Price per piece Crjdjhr Suyspfx Ah Uoi -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

Condition: used, Hydraulic pump: * Oil volume: 160L, * Motor: EMOD type 132S/2, 5.5 kW, Gearbox: * Lenze type 11.431.31.25.3 * Motor: LS 160 L-4, 15kW. Codelf Iz Repfx Ah Uori

Condition: new, High quality pillar drilling machine with a top equipment. FLOTT SB 30 MV Plus R2 (230.506) Standard equipment: - Main switch - Thread cutting device - Control panel with OLED display - Robust, high quality drill head hood with ergonomically inclined front - LED illumination - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control via central rotary knob - Emergency stop button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug - 3 years warranty for one-shift operation - Mechanical feed of Z-axis incl. electromagnetic clutch for (3) feed speeds - Drilling cross with pushbutton (on/off) for feed rate - In tapping mode: right-left release via drill cross pushbutton or optional foot switch Speed versions: Art.No.: 230.505 R1 (0-1.000 1/min, 100 Nm) Art.No.: 230.506 R2 (0-1.600 1/min, 70 Nm) Art.no.: 230.507 R3 (0-4.000 1/min, 200 Nm) Technical data: Continuous/normal drilling capacity (mm): R1: 27/32 (in E335/ST60) (100) / R2: 25/30 (in E335/ST60) (70) / R3: 30/35 (in E335/ST60) (200). Tapping capacity (pitch dependent): R1: M24x3 / R2: M20x2.5 / R3: M30x3.5 Crodpfxji Hqbce Ah Uji Spindle: MK III drilling depth (mm): 125 throat depth (mm): 300 column diameter (mm): 125 Usable working area (W x L) (mm): 590 x 450 Speed display: Digital Drilling depth display: Digital Drilling depth stop: with fine adjustment Table height adjustment: with rack spindle/working surface (mm): 150-700 machine dimension without packing (mm): 610 x 900 x 1.980 machine dimension with packing (mm): 670 x 1100 x 2140 Motor current 400V with frequency converter (kW): 3,0 Spindle speeds stepless (1/min): R1: 0-1000 / R2: 0-1600 / R3: 0-4000 feed (mm/rev): 0,10/0,16/0,25 weight (kg): 390 Note: For all other models, please feel free to contact us.

Condition: used, Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling Csdjcgan Ispfx Ah Ueri -Number: 4x wire feed rollers available -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm -Weight: 2.5 kg

Condition: used, Overall length: 266 mm overall length: 266 mm D: 35 mm Available: 1 Crodpjlkciwofx Ah Usi * Total length: 266mm, *D=35mm, * Available: 1st

Condition: used, Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Hole circle: Ø 224 mm/M12 Cjdpof A E Hbefx Ah Ueri -Passage: Ø 76 mm -Dimensions: 300/300/H mm -Weight: 40 kg

Condition: used, Three-jaw chuck key, three-jaw lathe chuck, faceplate chuck key, chuck key -Hexagon: SW 24 mm Codpfefth Sbox Ah Ujri -Sleeve: Ø 45 mm -Dimensions: 870/45/H610 mm -Weight: 6.4 kg

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm Credpsdrwlxsfx Ah Uoi -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

Year of construction: 1997, condition: used, Clamping device for automatic band saw, hydraulic double vice, saw unit mounting, feed, material positioning -Upport saw unit: from automatic band saw Behringer HBP 360 A -Stroke: 675 mm Cedpjgbvnnefx Ah Ujri -Shaft: Ø 40 mm -Measurements: see photos -Dimensions: 720/1545/H220 mm -Weight: 236 kg

Condition: used, Inert gas welding device, inert gas device, wire feed case -Wire feed case -with: hose package -Dimensions: 650/350 300 mm -Weight: 36 kg Crsdpod Shm Dofx Ah Uji

Condition: used, Conveyor chain, feed chain, roller chain, drive chain -Center distance: 35.5 mm Crodpfxjd Hcrlo Ah Uji -Center distance of bolts: 71 mm -Chain width (without pins): 23 mm -Bolt diameter: 10 mm -Lengths: 1x 2270 mm, 1x 3610 mm, 1x 3810 mm -Price: complete

Condition: used, Wire feed case for inert gas welding device, shielding gas device, wire feed case -Manufacturer: Ess wire feed case, water-cooled -Type: DVK 300-3 -Accessories: hose package Crjdpfef D A Abox Ah Uoi -Dimensions: 750/410/H430 mm -Weight: 32 kg