Used Lab Extruder for sale (2,151)

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Dedourvzrjpfx Afnocc Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Djdexnpx Nspfx Afnscc

Year of construction: 2013, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Dedpet Tvx Tefx Afnscc Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels.

Condition: excellent (used), Year of construction: 2008, 2-component extruder HDT HD Pro 6 Easy SI Year of production: 2008 (Overhauled in 2019) For Silicone Hydraulic Dedjwngagopfx Afnjcc Very good and clean condition As is Available immediately

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2.065.0, clamping force: 200 kN, New digital control from BBM. Two sets of extruder heads (see attached pictures). Dodpfx Afjw Dcybonecc

Condition: excellent (used), Year of construction: 2016, Field X 4250mm Field Y 2210mm Field Z 1000mm Motor 9.6Hp Tool changer 10 positions Drilling head 10 + 4 + 2 Djdpewq Ir Nefx Afnocc 2 Pumps x 250mc in total 500mc

Year of construction: 2021, operating hours: 10 h, condition: like new (used), functionality: fully functional, Kinexus lab+ rotational laboratory rheometer, configured with C25 cylinder package and 50N force cell, ideal for standard rheological applications in research and quality control. This equipment is designed for analyzing the rheological behavior of liquid and semi-solid materials, including viscosity, flow, thixotropy, and oscillatory testing. The lab+ platform offers precise control, thermal stability, and an intuitive interface, making it suitable for laboratories in the chemical, food, cosmetic, pharmaceutical, and polymer industries. Dcjdpfx Asxp H Uksfnec Key features: Nsbk Rewp Inbslfcpsda Model: Kinexus lab+ C25 cylinder package - ideal for cylindrical (Couette) geometry measurements Maximum normal force: 50N - for sensitive applications and materials with low shear resistance Robust construction and high precision Compatible software for advanced control and analysis Available immediately

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location. Dedpfxoibikws Afnecc

Condition: like new (used), Year of construction: 2001, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 1000x275x100mm Dcjdpfjix Ahxjx Afnoc Perpendicularity under 1µm! Incl. Kunz vacuum slide and Mahr measuring probe Measuring protocol on request against surcharge

Year of construction: 1992, condition: excellent (used), functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x250x50mm Perpendicularity 1µm 4-sided! Dsdpfx Afsq I R N Rsnecc Measurement report on request for an extra charge

Condition: excellent (used), Year of construction: 2017, Snack & Filled Stick/Pillow Production Line -Production capacity: 200 kg/h -Power requirement: 62 kW, 380 V / 50 Hz -Certification: ISO 9001 / 14001 / 18001, CE certified General description: Complete automatic line for the production of extruded snacks and filled sticks/pillows. The system is designed for continuous operation and includes all stages from raw material hydration to ready-to-season product cooling. All main components are made of stainless steel 304, ensuring full food-grade compliance and easy cleaning. Main components: -Corn moisturizing mixer (300 kg) with water dosing and metal impurity magnet. -Helix feeder with automatic extruder feeding and safety grid. -Extruder (200 kg/h) with 50 HP motor, LS inverter control, SKF bearings, 5 interchangeable dies, and air cooling system. -Air-current conveyor transferring product to the dryer. -Dryer (gas or electric) insulated double-wall stainless cylinder with inverter speed control. -Seasoning drum (Ø 85 cm × 3 m) with inverter speed control and spray coating system. -Two flavor & oil mixers, double-jacketed, 200 kg capacity each. Dcsdpfexqmxfjx Afnsc -Flavor pump with inverter-controlled dosing. -Cutter for sticks/pillows length adjustment. -Cooling conveyor with fans for product cooling before packaging. -Butter melting tank and stuffing mixer tank, both double-jacketed, temperature-controlled. Control system: Centralized Schneider & LS electrical control panels with full motor protection, inverter speed control, and automatic temperature regulation. Overall dimensions: Approx. 15 m (L) × 3.5 m (H)

Condition: good (used), Filling, capping, and labeling line for "PET" bottles, designed for calm liquids such as oil, vinegar, juices, nectars, etc. The set includes the following components: 1) PROSPOMASZ MONO-30 piston filler - Adjustable output: up to 3,000 bottles (packages/hour) - Number of dosing heads: 8 - Number of capping heads: 4 - Bottle volume: 200 - 1000 ml - Package dimensions: ~ Diameter: 50 - 110 mm ~ Height: 150 - 330 mm ~ Minimum bottle neck diameter: 18 mm - Weight: 1,100 kg - Installed power: 0.75 kW - Year of manufacture: 2003 - Machine dimensions: ~ Length: 1,500 mm ~ Width: 1,150 mm ~ Height: 2,300 mm The machine is currently set up for 1000 ml bottles. Additional format change parts for 500 ml bottles included. The set also includes many spare parts and seals. 2) Foil labeler (hot-melt roll-fed) - Manufacturer: JAWOTECH s.r.o. - Model: Tech - Lab HM - Capacity: up to 4,000 bph - Weight: 300 kg - Installed power: 4.0 kW - Year of manufacture: 2018 - Machine dimensions: ~ Length: 2,000 mm ~ Width: 1,200 mm ~ Height: 1,800 mm Dcsdpfxewyddyj Afnoc Automatic hot-melt application system by NORDSON, professional grade. The machine is configured for labeling 1 L bottles. Other bottle sizes require entry component adjustment. 3) Slat conveyors with a total length of 850 cm. Used machines, fully operational, regularly serviced. Video footage of the machines in operation prior to disassembly is available. Photos show the current condition in our warehouse.

Year of construction: 1994, condition: good (used), Materials: PE, PP, PA, PETP, PS, ABS, LDPE, HDPE, MDPE Conveyor belt 5000/000 with metal detector Extruder RM 120 VE with double degassing Cylinder heating zones: 5 Automatic Erema laser filter Double degassing Die face cutter Compactor Djdpjxantpjfx Afnocc Water bath Centrifuge Extruder drive 110 kW Cutter 75 kW Extraction blower Cyclone Output: 450–500 kg/h

Year of construction: 1980, operating hours: 36,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11360, Looking for a reliable, cost-effective solution? This used extruder machine offers excellent performance at a fraction of the cost of a new model. Well-maintained and fully functional, it’s perfect for processing PVC. Ideal for manufacturers seeking to expand production without breaking the budget. Contact us now for more details! Dedpfjvuquvox Afnecc

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder • Water Cooled 130kW AC Motor and Drive. Dcsdpfjw Snlwsx Afnoc – Low Noise

Condition: excellent (used), Julabo Model: FP51-SL (v.2) Julabo Circulating Thermostat SL v2 with FP51 Chiller – Heating/Cooling Thermostat Description: For sale is a professional Julabo Circulating Thermostat SL (v2) in combination with the Julabo FP51 Chiller. This device is used for the precise temperature control of liquids and external circuits. It is ideally suited for laboratory, industrial, and test bench applications. The system enables both heating and active cooling, offering stable and accurate temperature regulation. Technical Data (excerpt): Circulating Thermostat: Julabo SL (v2) Temperature Range: approx. +20 °C to +320 °C Thermostat Power Supply: 230 V / 50–60 Hz Chiller: Julabo FP51 Chiller Power Supply: 400 V / 3NPE / 50 Hz Djdpoygwwfjfx Afnocc Refrigerant: R507 Protection Class: IP21 Dimensions & Weight: approx. 60 × 70 × 100 cm approx. 120–150 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) For further questions, feel free to contact us by phone.

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ Dcsdpfx Asu Nu Nkefnsc total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Year of construction: 2021, condition: new, Julabo Model: FLW20006 Julabo FLW20006 Recirculating Chiller / Cooling Unit 400 V Year of manufacture: 2021 – Mint condition For sale is a Julabo FLW20006 recirculating chiller suitable for laboratory and industrial applications. This unit was manufactured in 2021 and has never been put into operation, thus it is in mint/unused condition. The recirculating chiller is water-cooled and ideal for demanding process and machine cooling tasks. Premium Julabo industrial quality, robust design, mobile on casters. Key features: - Mint condition / unused - Water-cooled - Digital temperature control - RS232 interface - Alarm contact - Heavy-duty industrial build - Mobile on casters Technical data (according to nameplate / manufacturer's specifications): Manufacturer: Julabo GmbH Model: FLW20006 Year of manufacture: 2021 Degree of protection: IP21 Electrical data: Supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 18 A Refrigeration technology: Refrigerant: R452A Charge: 2750 g Operating pressure HP / LP: each 26 bar CO₂ equivalent: 5.88 t GWP: 2140 Temperature data (FLW series): Temperature range: –20 °C to +40 °C Temperature stability: ± 0.5 °C Dimensions & weight (approx.): Dimensions (H × W × D): approx. 1200 × 600 × 800 mm Weight: approx. 220–240 kg Shipping & Delivery: Condition: Mint / unused Dcjdpfx Aeyfnybofnsc Scope of delivery: - Julabo FLW20006 recirculating chiller - Power cable Shipping type: Freight shipment on pallet (by arrangement, shipping costs depend on destination) Collection: By appointment only. (Specifications subject to change or error!) For further questions, feel free to contact us by phone.

Year of construction: 2018, condition: excellent (used), Julabo Model: FLW7006 Dodpjyfndgsfx Afnecc Julabo FLW7006 Recirculating Chiller / Cooling Unit 400V Excellent Condition / Year of manufacture: 2018 For sale is a Julabo FLW7006 recirculating chiller, a high-performance industrial cooling unit suitable for laboratory, testing, and production applications. The Julabo FLW7006 is a water-cooled recirculating chiller. The unit comes from professional use, has been professionally inspected, and is in very good, clean condition. All functions are operational, and the display and controls work flawlessly. Typical applications: - Machine and process cooling - Laboratory and testing technology - Cooling of plastics, lasers, or systems Highlights: - Robust industrial design - Digital temperature display - External control (RS232) - Alarm connection - Casters for easy transport Technical data: Manufacturer: Julabo GmbH Model: FLW7006 Serial number: SN 10339349 Year of manufacture: 2018 (according to nameplate) Refrigeration technology: Refrigerant: R452A Charge: 1,625 g Operating pressure: max. 24 bar CO₂ equivalent: 3.48 t GWP: 2140 Temperature & performance data (manufacturer's specifications): Temperature range: –20 °C to +40 °C Temperature stability: ± 0.5 °C Cooling capacity (typical, depending on operating conditions): - Approx. 1.3 kW at –20 °C - Approx. 5.5 kW at 0 °C - Approx. 7.4 kW at +20 °C Connections & features: - Supply and return (industrial fittings) - Pressure gauge - Shut-off valve - RS232 interface - Alarm contact (max. 30 V / 1 A) - Mobile base with casters Electrical data: Supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 14 A Protection class: IP21 Dimensions & weight (approx.): Dimensions (H × W × D): approx. 1050 × 550 × 750 mm Weight: approx. 150–170 kg Shipping & delivery: Condition: used Scope of delivery: - Julabo FLW7006 recirculating chiller - Connection cable Shipping: Freight shipping on a pallet (by arrangement, shipping costs depend on destination) Collection: possible by prior appointment. (Technical data may be subject to change or errors. Details without obligation!) For further questions, we are happy to assist you by phone.

Year of construction: 2005, condition: used, Technical details: total power requirement: 24,47 kW 1 Centrifugal Wheel Shot Blasting Machine WheelLaborator Group GmbH, Schlick HB10/12 ROTOJET HB 10/12-5.3-2 Year of manufacture: approx. 2005, Serial No.: 043 (Overhead conveyor shot blasting machine) W/h: approx. 44760.82, with infeed and outfeed conveyor chain, shot blasting rods, control cabinet Dsdpfsxyk Atjx Afnjcc *

Condition: used, Year of construction: 2009, Overview The labeller was built in 2009 by Italian manufacturer PE Labellers. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 12.000 bph Adapted for: 1.0L and 1.5L Working sense: entry left – exit right (counter-clockwise) Number of labelling heads: 12 Label position: wrap-around  Label material: OPP with hot melt Machine drive: Siemens S7 Bottles processed & format tools incl.: 0.25L – 0.50L – 1.0L Dsdpfx Afjw En Utjnjcc

Condition: used, Year of construction: 2017, Overview  This 5/10hl 3-device brewhouse was manufactured in 2017 by the Austrian manufacturer Labu. The brewhouse has various automation features such as automatic starting, automatic sparging and automatic spent grains discharge. It is currently available for sale, including additional equipment. Technical data  Capacity: 5/10hl Electrical heating: 27kW / 400V (special ceramic heating element) Equipment: 3 appliances: brewing kettle, lauter tun, whirlpool Additional equipment included: Manual filler (wall-mounted) Keg filler 2 fermentation and storage tanks (650L each) 1 fermentation and storage tank (1200L) All tanks from L-Inox, equipped with jacket and cone cooling (3 bar operating pressure, tested up to 4.5 bar) Glycol cooler Plate heat exchanger Scope of delivery  1x 5/10hl 3-device brewhouse (brewing kettle, lauter tun, whirlpool) 1x manual filler (wall-mounted) 1x keg filler 2x fermentation and storage tanks (650L, L-Inox, with jacket and cone cooling) 1x fermentation and storage tank (1200L, L-Inox, with jacket and cone cooling) 1x glycol cooler 1x plate heat exchanger Djdpfx Ajyb R Itjfnecc

Condition: used, Year of construction: 2009, Overview The labeller was built in 2009 by Italian manufacturer PE Labellers. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 12.000 bph Adapted for: 1.0L and 1.5L Working sense: entry left – exit right (counter-clockwise) Number of labelling heads: 12 Label position: wrap-around  Label material: OPP with hot melt Machine drive: Siemens S7 Bottles processed & format tools incl.: 0.25L – 0.50L – 1.0L Dcsdpfxew En Uyj Afnoc

Condition: good (used), The scope of delivery includes: 01x shelf connector, used ( for lateral fastening to the shelf uprights ) Manufacturer: Jung Heinrich Type: Esmena material color: sendz. galvanized Dcedpfei Enx Tex Afnec for shelf distance: approx. 250 mm L - profile: 85 x 40 mm weight: 0,68 kg | pcs.

Condition: new, Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank Dcedpfx Asdzq Scefnec We offer a new square tube for sale here. Included in the scope of delivery: 01 x square tube, new Material color: hot-dip galvanized Overall length: 6.050 mm Profilabm.: 50 x 50 mm Material thickness: 2 mm Steel grade: S235JRH/275JRH Customs tariff number: 73066192 Production according to: EN 10219-1 Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)