Used Lab Grinders for sale (2,843)

Condition: used, Year of construction: 2008, Manufacturer: Seydelmann Model: PG161 Year: 2008 Condition: Used Serial Number: 08357-1 Stock Number: 3315 Hole plate diameter: 160 mm Mixer: 1300 litres, max 700 kg Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 45kW Iodpszcnw Ujfx Ap Debc Dimensions: 2400 x 3000 x 3150 mm Weight: 2250 kg With inspection platform and lifter for 200L tote bin

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1800005039, travel distance X-axis: 360 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 240 mm, controller model: NUM 1050, swivel angle B-axis (max.): 120 °, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with grinding and eroding functions. The machine was refurbished in 2016. The latest service report for the machine is enclosed. Optionally, a variety of spare parts can also be purchased in addition to the machine. TECHNICAL DETAILS Travel range X-axis: 360 mm Iodpozb Dtpsfx Ap Dobc Travel range Y-axis: 240 mm Travel range Z-axis: 240 mm Swivel axis B: ±120° Resolution transverse axis X: 0.0001 mm Resolution feed axis Z: 0.0001 mm Resolution vertical axis Y: 0.0001 mm Resolution swivel axis B: 0.0001° Rapid traverse transverse axis X: 10 m/min Rapid traverse feed axis Z: 10 m/min Rapid traverse vertical axis Y: 10 m/min Rapid traverse swivel axis B: 6,500°/min MACHINE DETAILS Control: NUM 1050 Connection power without robot: 13 kVA Compressed air supply: 6 bar Compressed air connection diameter: 11 mm Operating hours (according to counter): 4,550 h EQUIPMENT Electrostatic filter system Documentation Note: The machine has contamination (oil stain) on the glass level gauge. Therefore, a complete on-site test is currently not possible.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Michael Deckel S 11 tool grinding machine. The machine is operational and in good condition. Accessories: grinding wheel arbors, collets, operating manuals. Iodszbt Aajpfx Ap Dobc

Condition: used, functionality: fully functional, DECKEL Tool Grinding Machine Type 2025 / Internal Grinding Machine with Vertical Grinding Spindle – Fully Operational For sale is a used DECKEL precision grinding machine with a vertical grinding spindle for internal cylindrical grinding. Iodpfxjzhuyxs Ap Debc The machine is used, fully operational, and equipped with a digital position display (DRO). Features: Vertical internal grinding spindle Digital readout (X / Y / Z) Original DECKEL components Robust precision engineering Suitable for: Tool making Mold and die industry Precision grinding Internal machining of bores Inspection and test run available by appointment. Loading on site possible. Additional photos available on request.

Condition: excellent (used), Year of construction: 2009, grinding length: 1,200 mm, grinding width: 600 mm, total length: 3,500 mm, total width: 1,875 mm, feed length X-axis: 1,320 mm, feed length Y-axis: 730 mm, feed length Z-axis: 480 mm, feed rate X-axis: 1,320 m/min, feed rate Y-axis: 730 m/min, grinding wheel diameter: 350 mm, table length: 1,200 mm, table load: 1,400 kg, table width: 700 mm, Surface grinder Ibedey Edctopfx Ap Djc LGB France - R12070SM MACH-ID 9600 Make: LGB France Type: R12070SM Year: 2009 X - Travel: 1320mm Y - Travel: 730mm Z - Travel: 480mm Table Length: 1200mm Table Width: 700mm Table load: 1400 Grinding stone dimensions:350 x 50 x 127mm Power: 16kW Speeds: 1500Rpm Length: 3500mm Width: 1875mm Height: 2250mm Weight: 4500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Tool grinder, grinding machine, angle grinder, turning tool grinder, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder, double bench grinder, tool grinding machine -Manufacturer: Deckel tool grinding machine type SOE -Number of collets: 48 pieces -Motor power: 0.55 kW -Speed: 2800 rpm -Grinding discs: Ø 100 mm -Grinding length: 90 mm -Largest grinding angle: 180° -Largest grindable radius: 10 mm -Coarse displacement: 100 mm -Fine adjustment: 15 mm -Swivel capability of the partial head carrier: 90° -Fine adjustment of the dividing head slide: 12 mm Ibedpfoy Ifc Tsx Ap Dec -Height from pipe guide center to grinding spindle center: 140 mm -Dimensions: 430/530/H1200 mm -Weight: 131 kg

Condition: used, Meat grinding machine Iedpfx Apexrhfpo Dsbc Manufacturer: Sind Voltage: 380V / 50Hz

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: RX7_800074, total height: 1,905 mm, total length: 2,010 mm, total width: 2,508 mm, workpiece weight (max.): 20 kg, spindle speed (max.): 10,000 rpm, grinding wheel diameter: 202 mm, overall weight: 4,500 kg, power: 19 kW (25.83 HP), 5-axis CNC tool grinding machine – completely overhauled (X, Y, and Z axes, CNC). High-performance production machine with a polymer concrete bed (ANCAcrete), 19kW, 10,000/min spindle, and a dual disc changer for up to eight grinding wheels. PLX tool loader with 2 pallets, latest CNC generation, and the latest ToolRoom RN35 software installed. Optionally available with an extraction system and coolant system. !Offer only valid in Europe, Africa, and the Middle East! Ibodjw Uf Sgepfx Ap Dec

Condition: used, TECHNICAL DETAILS Iedjw Ulnbjpfx Ap Djbc - Disc : 2x - Connection : 50 Hz 3x400 V - Machine weight : 3200 [kg] - Number of hours under power : 99 287 [h] - Wheel diameter : 700 [mm] - Wheel height : 200 [mm] - Max. height of the workpiece : 100 [mm] EQUIPMENT - Aspiration : 1 - Coolant tank : 1 - Hydraulic unit : 1 - Tooling : 1 - Retention plate : 1

Condition: used, Double bench grinder METABO type 7206 D Year of manufacture: approx. 1985 Max. grinding wheel diameter: 150 mm Grinding wheel width: 20 mm Grinding wheel bore: Ø 32 mm Speed: 3000 rpm Motor power: 280 watts Power supply: 380 volts, 50 Hz – Fitted with one 36 and one 80 grit corundum grinding wheel Required space (L x W x H): 460 x 240 x 220 mm Ibodpfexf Uv Usx Ap Doc Weight: 18 kg Good condition

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 11903, grinding length: 5,200 mm, grinding wheel diameter: 660 mm, grinding diameter: 1,600 mm, grinding wheel width: 50 mm, spindle speed (max.): 30 rpm, spindle speed (min.): 5 rpm, Churchill Roll Grinder Swing 1600 mm Centres 5200 mm Cambering Wheel Size 26” x 2” Roll speeds 5-30 rpm Bed and table were re-ground and not much use since so both are perfect. Ibjdpfx Aoxvrptep Dsc

Year of construction: 1964, condition: used, grinding length 160 x 400 mm mechanical ja Ibedox Ik Uuspfx Ap Dec weight of the machine ca. 0,5 t

Condition: used, TECHNICAL DETAILS - Workpiece diameter : 1 - 80 [mm] - Max. plunge grinding length : 140 [mm] WORKING GRINDING WHEEL - Minimum wheel diameter : 360 [mm] - Maximum wheel diameter : 508 [mm] Ibjdpfxjxz Hrms Ap Dec - Grinding wheel width : 200 [mm] - Peripheral speed : 45 [m/s] - Grinding wheel speed : 1900 [rpm] REGULATING WHEEL - Grinding wheel width : 40 [mm] - Wheel tilt : +/- 7 [°] - Minimum diameter of drive wheel : 220 [mm] - Maximum diameter of drive wheel : 305 [mm] SUPPLY - Installed power : 30 [kW] - Supply : 400V, 50 [Hz] DIMENSIONS - Floor dimensions : 6000 x 4200 [mm] - Machine height : 3000 [mm] - Machine weight : 3100 [kg] EQUIPMENT - CNC SIEMENS SINUMERIK 840 D - Double slides for the plunge grinding wheel - Automatic loading through vibrating bowl

Condition: excellent (used), Volpato LASM Edge Sander Ibsdpfx Aswcflqsp Doc Mechanical oscillation Constant grinding speed 1.5k3 motor Grinding height approx. 100mm Belt length 2640mm Height 130mm Extraction nozzle fi 100mm

Condition: excellent (used), Year of construction: 1994, total length: 2,950 mm, total width: 2,100 mm, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 400 kg, feed rate X-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, grinding wheel diameter: 350 mm, table length: 600 mm, table width: 400 mm, Digital read out system position slides 5 stones and flanches Coolant and Filtration system CE Mark Levelling pads included  Full set off books  X - Travel: 650mm Y - Travel: 400mm Z - Travel: 400mm Table Length: 600mm Table Width: 400mm Table load: 400 Feed rate X-Axis: 0-5000mm/min. Feed rate Z-Axis: 0-5000mm/min. Grinding stone dimensions:350 x 127 x 50mm Power: 6kW Speeds: 1400Rpm Cooling system: Yes Feed rate Y-Axis: 0-5000mm/min. Length: 2950mm Width: 2100mm Height: 2000mm Weight: 2550kg Iedsyvhxmspfx Ap Dsbc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), ELB SMART BD10 STC is a CNC surface/profile grinder engineered for high precision, accuracy and reliability. Capacities: table 1360×590 mm, X1100 Z670 Y400 mm, grinding 1000×600 mm, table load 1000 kg. Specs: wheel Ø400×100 mm (bore127), 1450 rpm, spindle 10 kW, table 2–30 m/min stepless, feeds up to 2000/1500 mm/min, vertical rapid 1 m/min, 3×400V 50Hz, total 30 kW; machine ~6900 kg; dims 3550×2410×2660 mm. Accessories: coolant, paper filtration, oil‑mist extractor, magnetic plate 800×600, redressing/profile roll devices, wheel/flange sets, electronic handwheel. Achieves tight tolerances; suited to automotive, aerospace, toolmaking, medical, watchmaking. Isdpfxjyxn N Dj Ap Dsbc

Condition: used, TECHNICAL DETAILS - Distance between centers : 650 [mm] - center height : 175 [mm] - Max. part weight between centers : 80 [kg] - X/Z stroke : 285 / 800 [mm] - Axis X programmable feed speed : [mm/min] - Resolution : 0.0001 [mm] - Axis Z programmable feed speed : [mm/min] - Resolution : 0.0001 [mm] - Table orientation : 0 - 8.5 [°] GRINDING WHEEL HOLDER HEADSTOCK - T1 grinding wheel dimensions : 500 x 63 x 203,2 [mm] - Speed : 50 [m/s] - Power : 9 [kW] - Manual orientation : -15 / +195 [°] - Indexing precision : 2.5 [°] Iodpfxoylc R Us Ap Debc - Internal grinding : 40.000 [rpm] - Power : 3 [kW] PART-HOLDER HEADSTOCK - Type of cone : CM5 - Speed : 1 - 1500 [rpm] - Power : 1.8 [kW] - Boring : 30 [mm] - C axis indexing precision : +/- 0,5 [°] - TAILSTOCK - Type of cone : CM4 - Quill diameter : 50 [mm] - Quill stroke : 35 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 20 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.670 x 2.050 [mm] - Machine height : 1.900 [mm] - Machine weight : 4000 [kg] MACHINE HOURS - Number of hours under power : 190 [h] EQUIPMENT - CNC : FANUC Oi-TD - Electronic handwheel - 3 colors status lamp - Oil mist extractor - Linear scales on axes X/Z - Dynamic wheel balancing : MPM - Automatic contact detection : SENSITRON 6 - Fixed dressing device - Workpiece probe - Coolant tank : 375 [l] * with paper filtering unit

Condition: used, Year of construction: 1998, Grinding area 500 x 200 mm Table size 450 x 200 mm Max. diet. spindle/table 400 mm Grinding spindle speed 2800 rpm Ibjdoy Anu Uspfx Ap Djc Equipped with: Hub & stone

Condition: used, TECHNICAL DETAILS - center height : 100 [mm] - Distance between centers : 650 [mm] - Max. table orientation : [°] Ibedpoyn R I Hsfx Ap Dec - Travel : 650 [mm] - Speed : 100 - 3500 [mm/min] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : [°] - T1 grinding wheel dimensions : 350 x 32 x 127 [mm] - Power : 3 [kW] - Speed : 1600 - 2200 [rpm] - Peripheral speed : [m/s] PART-HOLDER HEADSTOCK - Spindle speeds : - 1200 [rpm] - Power : 0.5 [kW] - Type of cone : CM4 - Max. part weight : 20 [kg] - Orientation : 0 - 90 [°] POWER SUPPLY - Supply voltage : 400 [V] - Power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 00 x 00 [mm] - Machine height : 1650 [mm] - Machine weight : 1900 [kg] MACHINE HOURS - Number of hours under power : 01 [h] EQUIPMENT - Sony LG20-2 display - Automatic contact detection : SENSITRON 6 - 1 tailstock with fine adjustment - 1 internal grinding spindle - Fixed dressing device - Coolant tank - 1 three-key steady rest

Condition: excellent (used), WADKIN SILHOUETTE STRAIGHT AND PROFILE GRINDER TWIN GRINDING HEAD:  A CENTRAL DESIGN FEATURE THAT ALLOWS FOR EXTREMELY FAST CHANGES BETWEEN PROFILE GRINDING AND STRAIGHT KNIFE GRINDING OR RESHARPENING. CAPACITY:  IT FEATURES A FULL 300 X 350MM GRINDING CAPACITY. PRECISION TOOLING:  USES A UNIQUE TURRET HOLDER THAT CAN HOLD UP TO SIX STYLI, ALLOWING FOR QUICK SETUP ACROSS VARIOUS WORK TYPES. ADJUSTABILITY:  THE TEMPLATE SLIDE INCLUDES COARSE AND FINE ADJUSTMENT VIA DIAL INDICATORS FOR HIGH-ACCURACY POSITIONING. Iedpfeyxxgmox Ap Dsbc COMPACT DESIGN:  BUILT WITH SPACE-SAVING FEATURES TO FIT INTO SMALLER TOOLROOMS WHILE MAINTAINING THE ACCURACY OF LARGER AUTOMATIC MACHINES. INCLUDED: 40MM OR 50MM ARBOR AS NEEDED OPTICAS SETTING STAND

Condition: good (used), We have 2 granulators / shredding mills for sale (the listed price applies to mill no. 2). The machines were used for cutting and shredding plastic, but they can also be used for processing other plastic materials. Both machines are adapted for liquid cooling. -Technical Data (Mill No. 1, square base): Dimensions: 150 x 115 cm / Height: 210 cm Rotor diameter: 36 cm Rotor/blade width: 55 cm Number of blades: 3 (The fixed blades are positioned diagonally; thanks to this configuration, resistance during cutting and shredding is significantly reduced, making the machine's operation much more efficient). Inlet (feed opening): 30 x 53 cm Motor: 22 kW / 30 HP Adapted for liquid cooling ----- -Technical Data (Mill No. 2, inclined/pyramid base): Dimensions: 150 x 125 cm / Height: 180 cm Rotor diameter: 25 cm Rotor/blade width: 52 cm Number of blades: 3 Ijdpouw Skhofx Ap Debc Motor: 22 kW / 30 HP Adapted for liquid cooling Prices: Mill No. 1: €7,200 Mill No. 2: €5,900 Price for buying both machines: €11,900

Condition: used, Grinder with mixer Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Ibodew Idzgopfx Ap Doc Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 30 h, overall weight: 2,450 kg, total height: 2,400 mm, total length: 2,000 mm, total width: 1,700 mm, The machine consists of two parts a raw grinder and a fine grinder. It is used for grinding electronic mainboards, cable waste and plastic waste to 20x20 mm, while the fine grinder grinds them to 5x5 mm pieces. The grinding unit is kept close by a hydraulic cylinder, opening is necessary during maintenance only. Grinding is carried out between fixed and rotary blades with adjustable gap. Motor: asynchronic. Ibjdpfxozrvq Ho Ap Djc

Year of construction: 1981, condition: ready for operation (used), A Niles gear grinding machine is offered. Max. gear diameter: 630mm, gear width: 215mm, module range: 1-12, ram stroke rate range: 75-315 double strokes/min, stroke length: 225mm, number of teeth min./max.: 12/140, min. root diameter: 50mm, max. tip diameter: 630mm, table diameter: 500mm, workpiece dimensions X/Y/Z: 630mm/200mm/700mm, max. workpiece weight: 400kg, min./max. grinding wheel diameter: 250mm/350mm, grinding wheel bore: 127mm, grinding wheel width: 30mm, grinding wheel speed: 1690rpm, weight: approx. 6300kg. Including cabinet with change gears and counter support. Documentation available. Inspection by prior arrangement is possible. Ibjdpfx Apozrn Nbe Dec

Condition: ready for operation (used), A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible. Iodpfx Apozkvl Is Dobc