Used Lever Shear for sale (2,979)

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Kedpfoy U Nqbsx Ak Aena

Year of construction: 1990, condition: ready for operation (used), A guillotine shear is offered. Cutting length: 3000mm, cutting capacity steel: 2mm - 6mm, cutting capacity stainless steel: 3mm. Equipped with back gauge, front support tables, finger protection guard. Inspection possible by arrangement. Knodpfjy Tat Dsx Ak Asa

Year of construction: 2008, condition: ready for operation (used), A CNC punching and cutting system Finn-Power in need of repair, including an automation and stacking system STR 6, is available. Punching force: 300kN, cutting force: 250kN, max. operating pressure: 300bar, max. material thickness: 8mm, max. punching diameter: 89mm, turret stations: 20, axis speed: 150m/min, positioning speed: +/-0.1mm, repeat accuracy: +/-0.05mm, machine weight: approx. 28000kg, operating hours: approx. 40342h. The thread-cutting unit is non-functional. Documentation available. An on-site inspection is possible. Ksdpfszcp T Rsx Ak Ajna

Year of construction: 1989, condition: ready for operation (used), Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment. Knjdezukrqopfx Ak Aea

Condition: ready for operation (used), Year of construction: 2006, sheet width 3030 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.50 mm no. of strokes 34 Hub/min cutting angle 1.6 Grad table height 820 mm distance between columns 3120 mm Control POS 100 engine output 2x 4.0 kW weight of the machine ca. 3600 kg range L-W-H 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros (!!) Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a Knodpfx Aozn Ahdok Aja "DUO-CUT drive" on both sides. Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge * with SCHRÃ?DER POS 100 NC control system * digital position display for the backgauge * adjustable from the front right * with setpoint/actual value input * stepless adjustment over the entire travel range * Limit values secured with limit switches * 9-program programming possible - Break-resistant, torsion-free welded steel construction - Compact and well-organized machine design - All-steel blades - 1x hold-down bar - 1x long side stop with â??ELGOâ? digital display - 2x front support arms, adjustable â??Sliding Systemâ? - Work table with recessed handles - Rear safety guard - 2x emergency stop buttons at the front - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, The shears are in good working condition, and an inspection while in operation is possible upon agreement. Technical specifications: Manufacturer: SAFAN Model: B-Shear 310-6 TS100 Serial number: B8913 Year of manufacture: 2006 Working length: 3,100 mm Maximum steel sheet thickness: 6 mm at 450 N/mm² Power consumption/input: max. 11 kW Power supply: 3 × 400 V / 50–60 Hz Weight: 6,120 kg Maximum working pressure: 300 bar CE compliant. The shears are located in a heated hall and are still in operation. 90% of the time, sheets with a thickness of 0.5 mm were cut on them. The shears have pneumatic rear supports. Knsdpfxjzu Sxlj Ak Aea Regular maintenance.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,637 kg, opening width: 396 mm, total width: 912 mm, total length: 1,960 mm, total height: 1,598 mm, cutting force: 120 t, Alligator Shear JMC 800 HD with hydraulic top jaw The 800HD alligator shear is a fast and powerful metal shear with a hydraulic top jaw, making it ideal for all cutting and cleaning operations. • 813 mm long blade for large scrap pieces • 120 tons of shear force for powerful cutting performance • Ideal for car radiators, heating elements, and mixed scrap Knodpfx Aozp Hfiok Aoa • Control for repeated single cuts for efficient operation • Robust McIntyre construction for long-term reliability

Condition: ready for operation (used), A tower shearing plant is available, plant contains (1) Trough goods storage, for material stock approx. 100-150m, max. fabric width: 5000mm (2) Steamer Fleissner, stainless steel, max. fabric width: 5000mm. (3) Main Drive Roller Menschner, cast roller Monforts, year of construction: 1987 (4) Tower Shearing Machine Menschner NTS-T-III, year of construction: 1988, fabric width: 300x5500mm, with three shearing cylinders (5) Control panel for auxiliary drives, deflection, transition bridge, roller fabric storage ETF, year of construction: 1988, storage capacity: approx. 80 running meters, with two center controls Erhardt+Leimer. Knedpfx Aei Atnfek Aea

Condition: ready for operation (used), Max. workpiece thickness: 20mm, including one unused and originally packed set of blades. Knedpfxoim Ixfo Ak Asa

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW Kedpfx Akoznngxe Aona weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, sheet thickness (max.): 6 mm, Equipment: emergency stop, finger protection, safety light barrier, in excellent condition, ready for use. Knsdpfx Akozlpgbo Aoa

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Shearing tool: Knife plate punch die for profile steel, 6 pieces Sizes: see photos -Submission/Price: complete Knedpfx Akeznkxwe Asa -Dimensions each: 188/188/H40 mm -Weight: 10 kg/pc.

Condition: used, Year of construction: 1981, total length: 3,700 mm, total width: 1,800 mm, total height: 1,600 mm, Colour: Green Weight: 4.500 kg - Year: 1981 - Documentation available: No - CE certificate present: No Ksdpfx Ajzm Urxek Ajna - Serial number: 810196 - Drive system: Conventional - Drive type: Hydraulic - Configuration: Guillotine - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3700mm x 1800mm x 1600mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1996, sheet width 3050 mm plate thickness 6.5 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable 750 mm work height max. 770 mm no. of strokes 11 - 22 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 5 voltage 380 V engine output 11.0 kW weight of the machine ca. 5000 kg range L-W-H 3950 x 1750 x 1720 mm Features: - Electro-hydraulic / slide-guided panel shear - HACO NC control, Model SC 5, front left * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction of the backgauge * Emergency stop switch - Electromotor-driven backgauge, mounted on ball screws Knedpfx Aezndq Tok Aja - Hydraulic sheet metal hold-down devices - Front finger guard - 1x long side stop - 1x freely movable foot switch - Operating instructions in German (PDF)

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Manufacturer: Mubea, cutting plate shearing tool for square steel / round steel -Item No.: Square steel: 27x27 mm / 50x50 mm -Round steel: Ø 31/56 mm -Number: 2x shearing tools available Knodpfx Akoznadvo Aea -Price: per piece -Dimensions: 185/185/H40 mm -Weight: 8.8 kg/pc.

Year of construction: 1990, condition: ready for operation (used), Offered for sale is an Atlantic guillotine shear. Cutting length: 3000mm, max. cutting thickness: approx. 6mm. Documentation available. An on-site inspection is possible. Knodpfxeztzrfe Ak Asa

Condition: good (used), Year of construction: 2006, machine/vehicle number: 38461, Offer 26186 Technical data: - max. working width 1275 mm - max. material thickness (at 40 kg tensile strength) 3 mm - front angle stop Knodpoztvn Uefx Ak Asa - front material supports approx. 300 mm - rear stop, manually adjustable 5 - 650 mm - stroke rate approx. 32 /min - cutting angle 1.9 ° - preselection for single stroke / continuous stroke - drive 400 V / 3.0 kW - E – foot switch - protective guard on the rear of the machine - space required, including rear stop, without front support arms - approx. W 1500 x H 1150 x D 1450 mm - weight approx. 1200 kg

Condition: excellent (used), Year of construction: 2016, Cidan CNC plate shear in top condition. I would be happy to send you a video! The shear is in very good technical and optical condition; all bearings are in perfect order. The machine comes from a small business and has been well-maintained and serviced accordingly. Ideal for sheet metal workers, roofers, carpenters, metalworkers, or workshops looking for a precise and reliable bending machine. Advantages of the machine: • Brand quality from Cidan • Very good condition • Precise operation Knodpfx Ajzunvtok Aoa • Ready for immediate use • Robust professional machine Sale: • Machine price, net • You will receive a proper invoice with VAT shown • Shipping or freight forwarding possible (upon request) • Inspection possible by appointment Please note: If you are interested, please contact us by phone. Phone: You can also find other sheet metal working machines and matching shears in my other listings. Quality you can rely on. Are you looking for an honest, stable in value, and technically sound machine?

Condition: good (used), Year of construction: 1986, Max. working width: 4000 mm for sheets with tensile strength of 40 kg up to: 3 mm Table width: 470 mm Backgauge adjustment: 1000 mm Fixed cutting angle: 1°30' Frame throat depth: 200 mm Hydraulic drive: 380 V, 7.5 kW Required space: 4650 x 1830 x 1420 mm (height) Knsdpfx Aey A Eg Ujk Asa Weight: 5.7 t

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Kodjzt Sxvjpfx Ak Aona Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: used, LVD MVS 5050 × 6 – Technical Specifications: * Maximum sheet thickness: 6.35 mm * Maximum cutting length: 5,050 mm * Back gauge range: 750 mm * Adjustable cutting angle: 0.5° – 2.5° Kedpfxszmam Ij Ak Aona * Adjustable blade clearance: 0.05 – 0.7 mm * Strokes per minute: 12 – 45 * Main motor: 15 HP (approximately 11 kW) * Machine weight: 12,000 kg * Power supply: 230 V

Condition: used, Technical details: throat: 510 mm number of strokes: 34 Hub/min height of stroke: 100 mm sheet thickness - max.: 16 mm round bar steel: Ø 60 (scheren) mm square edge steel: 60 (scheren) mm angle steel: 90°: 200x200x18 und 45°: 100x100x13 (scheren) mm flat steel: 750x20 und 400x30 (scheren) mm knife length: 765 mm total power requirement: 15 kW weight of the machine ca.: 5,1 t dimension machine approx.LxWxH: 2,4 x 1,2 x 2,0 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Punching: -Hold-down device -throat 510mm -Punching force 150t -Hole size max. Ø 40x28mm -Ø max. 165mm Ksdsxcay Hepfx Ak Ajna -max. punch holder Ø 31mm, currently installed punch Ø 25mm Notching: -max. sheet thickness 16mm -max. angle steel 120mm -Cutting depth x width: 110 x 58mm -Pipe notching device Ø 60mm Accessories: various dies and various punches and small punches (see photo) *

Condition: good (used), Maqfort HGD 3013 Kodpfxozdzn Us Ak Ajna 3200x13mm Runs well, but the back gauge needs to be checked!

Condition: excellent (used), Year of construction: 2018, LARA CDCH-1400 SHEAR (year 2018) With discharge table. Hydraulic shear designed for cross-cutting strip material and managing scrap in coil feed lines. Supplied together with a discharge table, allowing for convenient and safe evacuation of cut material while maintaining a clean and continuous production process. Robust equipment with heavy-duty industrial construction, especially suited as an auxiliary component for cutting, stamping, or coil-feeding lines. Main Features • Hydraulic cross-cut shear • Hydraulic drive • Robust design for continuous operation • Clean and precise cutting of metal strip • Integrated discharge table • Facilitates evacuation of scrap and off-cuts • Improves ergonomics and orderliness on the line • Keeps the work area clear • Heavy-duty industrial construction • Rigid and stable frame • Designed to be integrated at the same height as the LARA feeder/straightener • Easy integration into existing lines • Safety system • Integrated into the line control system • Designed in compliance with CE standards Knodsy Edlhspfx Ak Asa Work Materials • Carbon steel • Stainless steel • Aluminum and light alloys Main Technical Data • Maximum working width: up to 1,400 mm • Type of drive: hydraulic • Working pressure: 4–6 bar (pneumatic control system) • Power supply: 400 V / 50 Hz

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, TIMAC TZZ-1604 Circular Disc Cutter with Double-Station Automatic Stacker. Year 2018 Inspected and ready for production. Automatic circular cutter for disc production from coil or strip, equipped with a double-station automatic stacker, enabling continuous operation without downtime. Specially designed for manufacturing ends and lids, circular blanks, and parts for deep drawing or stamping processes. Main features: • Circular cutting using adjustable blades • Diameter adjustment system for various disc formats • Double-station automatic stacker: - Vacuum arm for individual disc collection Knjdsy Edk Ropfx Ak Aja - Possibility to remove complete stacks without stopping production - Doors with safety latches and interlocks • Integrated electrical and pneumatic system: - Independent electrical panel - PLC control - Safety compliant with CE regulations Key technical specifications: • Sheet thickness: - Up to 3 mm (carbon steel / aluminium) - Up to 1.5 mm (stainless steel) • Blade diameter: 100 mm • Installed power: approx. 16 kW • Electrical supply: 400 V / 50 Hz • Pneumatic pressure: 6 bar • Year of manufacture: 2018