Used Longitudinal Welding for sale (7,869)

Condition: good (used), Year of construction: 2010, functionality: fully functional, load capacity: 12,000 kg, rotary table diameter: 1,980 mm, faceplate diameter: 1,980 mm, welding current (max.): 800 A, New welding positioner for 12t max load faceplate diameter: 1.9m turning speed: 0,05-1,0 rpm also availible for renting Hjdpfx Abjrb A N Ieronh

Year of construction: 2023, condition: like new (used), functionality: fully functional, positioner for 6t load Hnodpfegl Ndmox Abrjh speed: 0,03-0,6 rpm motorized tilting faceplate diameter 1.600mm availible also for renting

Condition: good (used), Year of construction: 2019, functionality: fully functional, turning roll, roller bed for400t max. load and workpiece diameter 1.000-9.000mm. Steel-wheels. Consisting of 1x drive unit, 1x idler unit and 4x fit-up units (hydraulic) Hnodpfeuf R Ilox Abrsh availible also for renting

Condition: good (used), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welder for vehicle manufacturing, tank construction, steel cabinet manufacturing, sheet metal processing, and the wire industry - Effortless welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardized rotary connectors - Only one connector each for welding current cable, control cable, and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Simple and user-friendly operation - All set parameters and process variables can be read at a glance - Changes to welding parameters only by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 welding times - 8 programs - Built-in unit - Automatic Mains frequency detection 50/60 Hz - Power failure-proof parameter storage - "On/Off" switching via button Additional configuration parameters (user-locked): - Program selection - Advance contact - Advance contact time - Two-hand interlock (Check) - Start signal interlock - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - First half-wave delay External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. ``` External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay progress contact - Relay ready Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC logo PDF files available under the Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request! Hnodpfsq H Aqxjx Abrjh

Year of construction: 2003, condition: reconditioned (used), longitudinal saw for cutting boards 4 meters main engine 400V, 7.5kW Hsdpfx Abehbp T Sorjnh - blade feed motor 400V, 2.2 kW - extending the pneumatic saw - working pressure 6bar - cutting length 4020 mm - cutting height approx. 170mm - machine length 5.5 m - machine width 1.6 m

Condition: used, Dalex Works Pms 10-2 380V 50Hz Hnodpjg Rcpxsfx Abrsh rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg

Condition: like new (used), Year of construction: 2018, Esab welding column CaB 460 M+ 3.0x3.5 MTR Hjdoyifxyopfx Abrjnh

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, The following used system is available for sale. Should this be of interest to you, I will provide further details if required. 2 x 1500 Combined Cutting Line - 22.9. - 06:29 We offer for sale: 2 x 1500 Combined Cutting Line / Cross, Angular, and Longitudinal Shearing. Technical Data: Manufacturer: SCHRÖDER Material width: 1,500 mm Material thickness: 2.0 mm Input coil weight: 10 tons Angle shears: 1,500 x 2.0 mm Rotary shears for cutting: For a coil width of 600 mm: ±50° For a coil width of 800 mm: ±40° For a coil width of 1,000 mm: ±30° For a coil width of 1,500 mm: ±5° Description: The system separates sheets from coils up to a maximum width of 1,500 mm. The coil scale processes 11 tons of material continuously—crosswise, lengthwise, and at angles. Strip cuts can be slit into 4 parts by longitudinal slitters. The system features a straightening unit with a 5-roll leveller, followed by longitudinal slitters, angle shears, a conveyor belt, and a stacking unit with integrated scale. Hodpeyigrnofx Abrenh The entire system is designed for cutting sheets from coils into various blanks and panels. The complete line is mounted on a shared frame measuring approximately 5 x 15 meters. It is maintenance-friendly, energy efficient, and in excellent condition. The system is connected and can be tested and demonstrated. Year of manufacture: 1995

Condition: new, Year of construction: 2025, 99% filtration efficiency – removes smoke, vapors, and fine metal dust. Automatic filter cleaning – the impulse system maintains full performance without requiring frequent maintenance. High extraction capacity – up to 3000 m³/h – effectively eliminates contaminants without compromising visibility of the work area. Quiet operation (≤78 dB) – enables comfortable use in confined spaces. Integrated work table – ergonomic work surface with lower and rear extraction. Sturdy steel construction – resistant to vibration and intensive use. Mobile – equipped with locking transport wheels, easy to move. Safe operation – protection against overheating and particle ignition. Power supply: 380 V / 50 Hz Motor power: 3.0 kW Air flow: 2500–3000 m³/h Hjdoyi Utvjpfx Abrjnh Operating pressure: 2600–3050 Pa Filtration efficiency: 99% Filters: 2 × polyester cartridges Filter cleaning: Pneumatic, pulse (backflush) Dust container capacity: 50 l Noise level: ≤78 dB(A) Device dimensions: 1500 × 1200 × 1600 mm Table work surface: 1500 × 700 × 750 mm Weight: approx. 200 kg

Condition: excellent (used), Note: The pictures serve to clarify the material. Hnsdpetk Ikmefx Abreh - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 5,950 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 5,650 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 5,950 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Technical data of the pallet rack traverse: Racking system: SSI Schäfer Type: PR 600 Included in delivery: 01x pallet rack traverse, II. choice Material color: RAL 5010 gentian blue Type of truss: head truss U-profile: 70x42 mm agraffe: 5 hooks clear width: approx. 1.970 mm max. load per truss pair 600 kg, with evenly distributed load 02x safety pins, II. choice execution: compl. galvanized Hjdpfxohryi Ij Abrsnh To secure the longitudinal beams against unintentional lifting out Further information / data: These cross beams / longitudinal bracings can be used with pallet racks as storage shelf for boxes / cartons etc. The storage of euro pallets / pallets is not permitted on these pallets is not permitted on these traverses. The maximum load per truss pair is approx. 600 kg. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,300 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 3,000 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,300 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Hnedpfxstk Irke Abrjh Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Note: The images are for illustrative purposes only. - The workbench frames are commissioned unassembled; - Production time is typically approximately 3-5 business days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Hodpfxewgicbj Abrsnh Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,200 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Hjdpfetk Iwasx Abronh Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,900 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm 06x self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 Hnsdpertqm Djfx Abreh 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,750 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,450 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,750 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Hnsdpetk Iwpsfx Abroh General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Equipment: type plate available, Powerful TIG Welding Unit for Professionals The EWM TIG 350 DC FWD is a high-quality, water-cooled DC TIG welding unit from EWM, engineered for demanding applications in metal construction, industry, and professional workshop environments. This high-performance machine enables precise DC TIG welding with up to 350 A welding current and offers superior arc stability, high weld quality, and efficient cooling – ideal for steel, stainless steel, nickel alloys, copper materials, and other metal workpieces. 🔧 Welding Performance and Technology Direct current TIG welding (DC) with an adjustable range up to approximately 350 A – powerful penetration and precise control. Robust inverter electronics ensure stable arc performance and high efficiency. The water-cooled design allows continuous operation even under heavy-duty conditions. ⚙️ Features and Operator Comfort Proven operation with an intuitive control panel – easy adjustment of welding parameters. Connection options for remote control and torch functions for added convenience. Splash-proof housing rated to IP23, suitable for tough workshop environments. Energy-efficient operation thanks to high efficiency and standby function. Hjdeyililepfx Abronh Dimensions: 1000 x 520 x 900 mm Weight: approx. 180kg All information subject to change or errors.

Condition: used, Year of construction: 2013, functionality: fully functional, Graf Synergy SL4-FF 4028 Extended dimension 4000x2800mm Weight 2700 Vaccum cleaner In working condition, can be seen at work. Barcode Reader Hsdsyg Ruwepfx Abrjnh Veka Profiles

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Frequency: 35 kHz Power: 1000 W 230V AC Hsdpfx Aeyimqwobrsnh Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or require further information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, TIG/WIG Welding System with 6-Axis OTC Robot and 2-Axis Positioner For sale is a complete, CE-compliant compact welding cell for automated WIG/TIG welding, manufactured by Femitec GmbH and equipped with high-quality components from OTC Daihen. This system is ideally suited for precise welding tasks on small to medium-sized parts. The main image shows the unit in assembled condition. Currently, the system has already been disassembled by specialists and is stored in a warehouse. The original purchase price was over EUR 130,000.00! This is a demonstration unit from Femitec, which was subsequently used for only a short period in an integration operation. ONLY just over 10 working hours! General System Data Hnsdpfxsyi Hb Sj Abroh • System manufacturer: Femitec GmbH, Neusäß (Germany) • Machine type: Compact welding cell • Year of manufacture: 02/2022 • Order number: 133602 • CE compliant • Total weight: approx. 1,400 kg • Electrical connection: • 1 × 400 V AC, 3-phase, 50 Hz • Rated current: 38 A • Fusing: 40 A Robot System Industrial Robot • Manufacturer: OTC Daihen FD-B6l • Robot type: NB6L • Model: NB6L1-CEFC • Year of manufacture: 11/2019 • Payload: 6 kg • Net weight: 285 kg • Configuration: prepared for arc and touch sensing • Application: high-precision WIG/TIG welding • Controller: FD-11 Robot Controller • Type: OTC FD11 • Model: FD11-CL0000 • Year of manufacture: 11/2019 • Supply: 3-phase AC 200/220 V, 50/60 Hz • Power consumption: 2.4 kVA • SCCR: 5 kA Positioning System • Manufacturer: OTC Daihen • Type: 2-axis robot positioner • Model: FD-2PF300 / A2PF301-ECN • Year of manufacture: 11/2019 • Load capacity: up to 500 kg • Net weight: 270 kg • Tilt Axis Encoder Offset: 8387260 Welding Technology (WIG / TIG) Welding Power Source • Manufacturer: OTC Daihen • Model: WB-A350P • Year of manufacture: 2021 • Welding process: WIG / TIG AC & DC • Welding current range: up to 350 A • Duty cycle: up to 100% (depending on mode) • Protection class: IP23 • Power supply: 400 V Wire & Additional Components • OTC TIG Filler Controller: • Type: HC-71D • Year of manufacture: 2021 • Supply: AC 200/220 V • OTC SHIF-1 Cooling Unit: • Year of manufacture: 09/2021 • Liquid cooling • Power: 1.2 kW (P1min) • Max. pressure: 3.5 bar Equipment & Safety • Servo torch welding gun (water-cooled) • TIG cold wire feed • Provisions for arc and touch sensor • Compact control cabinet • Safety light curtain • Heavy-duty steel base plate Dimensions (approx.) • Footprint: 1,600 × 3,000 mm • Design: compact, integrated welding cell Condition & Application Range • Professional industrial system • Suitable for series and precision welding • Ideal for stainless steel, steel, and thin sheet applications • Maintenance-friendly, modular design • Demonstration unit from Fimtec GmbH • Operating hours before disassembly: just over 10 hours! ATTENTION!! The system is dismantled and is located in 4153 Rheinach (Switzerland) Inspection: possible upon request. Please send me a message. Disclaimer: The system has been used very little and is sold "as seen." A function test will not be performed. Sale is without any warranty or liability from the seller.

Condition: excellent (used), Pneumatically operated, water-cooled spot welding gun Hand-operated control valve Manufacturer: DALEX Type: 3238 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm reach: 170 mm Equipped with double-stroke cylinder: long stroke 75 mm, pre-stroke 50 mm, working stroke with adjustable range 0-25 mm Cardan suspension and suspension bracket Hnsdpfeyh Rf Nex Abroh 10 m connection cable Including separate synchronous welding controller 1/01 TT

Condition: like new (used), EWM acticARC Tetrix T352 AC/DC Robotic WIG/TIG - Welding machine with cool cooling unit Hsdpfxeyilubj Abrenh Very good condition Used very little Collection in 74722 Buchen. Shipping within Germany possible for €100 gross. Used equipment – normal signs of use, but fully operational. Further details and pictures available on request.

Condition: excellent (used), Pneumatically operated, parallel-guided spot welding machine Brand: DALEX Type: PMS 10-4 Throat Depth: 550 mm with double-stroke cylinder and approach stroke Rated power at 50% duty cycle: 50 kVA Hodsyh Hlxjpfx Abrjnh Secondary short-circuit current: 24 kA Secondary open-circuit voltage: 5 V Electrode force: 65-390 daN Weight: 425 kg with mounted control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Sample photo Machine is currently being refurbished.

Condition: excellent (used), Pneumatically operated, water-cooled spot welding tongs Make: DALEX Model: 3326-3 with 5/2-way solenoid valve Double stroke cylinder – long stroke 60 mm, pre-stroke 40 mm, working stroke adjustable from 0–20 mm Rated output at 50% duty cycle: 22 kVA Secondary short-circuit current: 14 kA Secondary open-circuit voltage: 3.8 V Electrode force: 280 daN With cardan suspension and suspension bracket 10 m connection cable and control line Arm reach: 350 mm Including: Hnjdpsyh Hi Djfx Abrsh Remote welding controller type 1033

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Hedpfxsycv Sae Abrenh Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition