Used Lumber Circular Saw for sale (5,876)

Condition: used, Year of construction: 2017, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm Hfsdpfoy Ruvbex Ahash 110 mm 95 mm 135x60 mm 120 mm 100 mm 135x60 mm 180 mm dimensions of saw-blade 350x32x3,4 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg

Condition: used, Year of construction: 1995, saw blade diameter 400 mm cutting diameter 130 mm saw blade turning speeds 30 / 60 U/min capacity 90 degrees: square 120 mm total power requirement 4,8 kW weight of the machine ca. 1,8 t dimensions 1,4 x 1,2 x 2,3 m Semi-automatic Cold Circular Saw - Miter cutting Hfodpoy Umcbefx Ahaeh - Micro-spray lubrication system - Safety guard - Emergency stop device

Condition: new, Year of construction: 2024, Underfloor light metal circular saw Make: METALLKRAFT Model: ULMS 420 Item no.: 3627420 Condition: New machine Cutting area (square): 120 x 120 mm Speed: 2900 rpm Hfjdpfjtuch Eox Ahajh equipped as standard with: - Saw blade 420 x 30 x 4.0 mm Z 120 - minimum quantity lubrication system - Compressed air gun and spiral hose - Two extraction sockets for connection to an extraction system - Operating instructions

Condition: good (used), Year of construction: 1994, operating hours: 1,000 h, functionality: fully functional, saw blade diameter: 550 mm, cutting range round steel at 90°: 200 mm, type of input current: AC, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 1,000 kg, cutting diameter: 200 mm, Barely used aluminum circular saw with length measurement on the infeed conveyor. BRAND: ELUMATEC. DRIVE: VIA AIR COMPRESSOR. Saw blade diameter: 550. Maximum cutting length: 200 mm at 90 degrees. Offer includes infeed conveyors and length measurement system. A stable loading device is available. Hsdpfjzavzvex Ahaefh

Year of construction: 1993, condition: good (used), Circular saw for aluminum Manual feed Manual vertical clamp Hfedpszab Alofx Ahaeh Saw blade diameter up to 350mm The transport trolley is not included!

Condition: good (used), Year of construction: 2023, machine/vehicle number: 1018842, Offer 26151 Technical data: - Saw blade diameter: up to 450 mm - Cutting range with a saw blade diameter of 450 mm: - at 90°: round 150 mm - square 140 mm - flat up to 300 x 95 mm - Miter adjustable: 30° - 90° - 30° - at 45°: round 150 mm - flat 280 x 300 mm - Cutting speeds: 10 / 20 1/min - Feed rate of the saw blade: 0 - 1150 mm/min - Rapid return: 3000 mm/min - Connection: 400 V / 4.8 kW - Hydraulic material clamping device, steplessly adjustable clamping pressure - Adjustability of the backstop - via handwheel with analog display: 0 - 120 mm - Hydraulic material backstop clamping device - Micro-spray cooling system - Original infeed roller conveyor: 4000 mm - Original outfeed roller conveyor with measuring stop + digital display: 4000 mm - Space requirement: approx. W 1050 x H 1950 x D 1400 mm - Weight: approx. 1200 kg Hodpfjy Uwpxex Ahajfh

Year of construction: 2023, condition: ready for operation (used), Offered is a semi-automatic metal circular saw. Saw blade diameter: 350mm, vise opening max.: 170mm, control: semi-automatic. Equipped with hydraulic vise, integrated coolant system, control panel. Weight: approx. 480kg, overall dimensions X/Y/Z: approx. 1000mm/1200mm/2000mm. Inspection possible by arrangement. Hfsdpfx Ahjy Uyfcsaoh

Condition: used, Year of construction: 2008, KALTENBACH KKS 400 E HYDRAULIC METAL CIRCULAR SAW MAKE KALTENBACH, MADE IN GERMANY MODEL KKS 400 E YEAR 2008 SAW BLADE DIAMETER Up to 400.0 mm CUTTING CAPACITY AT 90 DEGREES ROUND: 130.0 mm SQUARE: 120.0 mm FLAT: 305.0 x 40.0 mm or 240.0 x 85.0 mm CUTTING CAPACITY AT 45 DEGREES ROUND: 130.0 mm FLAT: 245.0 x 30.0 mm or 180.0 x 70.0 mm MILTER ADJUSTABLE LEFT - RIGHT 0 – 90 DEGREES INFINITELY VARIABLE SAW BLADE FEED RATE 0 – 10 m/min SAW BLADE CUTTING SPEED 13 / 26 m/min SAW DRIVE 400 V / 1,7 / 2.6 kW HYDRAULIC DRIVE 400 V / 0.75 kW PLUS 2 SETS OF LOADING RACK Hjdpfx Ahjy D I Nnoasfh

Condition: good (used), functionality: fully functional, Crosscut Saw OMEC TA185 Maximum cutting height: 180 mm Maximum cutting width: 900 mm Saw blade diameter: 550 mm Pneumatic material clamping Pneumatic saw feed Saw operated via two-button control Hfodpfx Aoy Sff Nehash Main motor power: 7.5 kW Machine dimensions: 492x145x120 cm (H) Weight: 600 kg

Condition: excellent (used), CATALOGUE NUMBER 7991 TECHNICAL DATA - max saw blade diameter: 400 mm - saw blade bore diameter: 30 mm - blade guard - height-adjustable arm - max cutting height: 120 mm - max cutting width: 540 mm - hydraulic saw feed - 3 infeed rollers on the table - motor: 3.7 kW - hydraulic pump motor: approx. 0.55 kW - extraction port diameter: 110 mm - roller width: 530 mm Hedpfxjy Nx Ure Ahaefh - machine dimensions (L/W/H): 1900x1500x1950 mm - weight: 650 kg ADVANTAGES – Polish manufacture – DTR documentation – very good condition – used saw Net price: 13,900 PLN Net price: 3,300 EUR (depending on the exchange rate of 4.2 PLN/EUR) (Prices may change in case of significant currency fluctuations)

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Hfsdpfey Ni Ayex Ahaeh

Condition: used, cutting width 90°: 410 / 45°:290 mm Cutting height 170 mm Hedpfx Ahjy Ihaujaofh Cutting height at 45° 115 mm saw blade diameter 420 mm machine weight ab. 150 kg Saw blade 40 mm saw blade turning speeds 3350 U/min

Condition: used, cutting width 90°: 410 / 45°:290 mm Cutting height 170 mm Cutting height at 45° 115 mm saw blade diameter 420 mm machine weight ab. 150 kg Saw blade 40 mm Hfedpfxey Ihaho Ahaeh saw blade turning speeds 3350 U/min

Year of construction: 2026, condition: new, Wravor 20-160 – robust and reliable industrial circular - edger and multirip saw in one machine, designed for professional primary board processing. The machine is suitable for accurate and high-capacity edging and ripping of boards and cants in demanding industrial production. Technical data: - main motor: 30 / 37 / 45 / 55 / 75 kW - cutting thickness: 20 – 160 mm - max cutting width: 900 / 1000 / 1250 mm - number of movable blades: 1-4 (hydraulic or servo drive system for precise and flexible cutting adjustment) Hodpfx Aoy Rku Hehaofh - computer setting of cutting width - heavy-duty and stable construction, - high cutting precision, - excellent productivity, - reliable operation for continuous industrial use, - different options for mechanisation (mechanic or automatic conveyors) The machine can operate independently or as part of a complete sawmill line with automatic transport systems.

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Cutting with: 130 mm Power: 5,1 kW Weigth: 1260 kg Hfodegixvwepfx Ahajh

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 Hfsdpfx Ahoy Dtpmeaoh ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: good (used), Year of construction: 2016, - Table length (mm): approx. 3000 - Power (kW): 5.5 Hsdpfx Ahjy Tm Twoasfh - Scorer: included - Saw blade: swiveling

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 72.250/01, saw blade diameter: 125 mm, saw drive: 1,500 W, PLC control: MAGELIiS 125 mm saw blade Motor power: 1.5 kW Saw feed rate: 0-20 mm/min Cutting speed: 15 - 170 m/min (steel) 630 - 1885 m/min (non-ferrous metals) Max. working area: 70x40 mm (steel) Max. working area: 60x40 mm (non-ferrous metals) Circular working range: 5 - 70 mm (steel) Circular working range: 5 - 50 mm (non-ferrous metal) Feed length: 5 - 500 mm 5-9999 (multi-step) Max. feed speed: 500 mm/s Weight (saw): approx. 610 kg Dimensions (length x width x height) (saw): approx. 2500 mm x 1000 mm x 2000 mm Automatic bar feeder. NOTE If the Buyer decides to purchase this machine, the Seller will disassemble the machine and load it onto the provided transport vehicle free of charge! Hsdpfx Aey U Na Ashajfh

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Hodpfxextbtps Ahajfh Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 107500 € 2031.75 € 360 mm Ø360 x 40 mm 40 - 280 U/Min rund: 20 - 100 mm; quadra 60 mm 10 - 9999 mm 900 mm 15 kW 3400 mm 2675 mm 2750 mm 3450 kg 21,65 kW Mass production in continuous operation is done by BMDO 100 XS when producing cut-off pieces of steel and non-ferrous metals with a material cross-section up to a diameter of 100 mm. BMDO 100 XS is designed to be used with TCT circular saw blade in order to cut solid bars in high speedand excellent precise. It is also suitable for HSS blades to cut tubes. With the Standard 800mm stroke servo feeding and 6 meters automatic loader. BMDO 100 XS is perfect for large-scale production of solid bars. STANDARD ACCESSORIES: automtic loader 6 m motorized roller table 3 mMikrospray Coolant Hydraulic Vice Inverter Control Panel Saw Blade Brush Cover Switch Heavy Duty Gearbox Hfedpfx Ahsy Nnxgjaeh OPTIONAL EQUIPMENT (prices on request): mist filter 6 m roller table

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Hedpjufgnzefx Ahajfh Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Hfodpfx Aey E Uk Iohaoh DE - 44143 Dortmund - Wambel / Germany

Condition: used, Saw blade Ø: 1310 mm Hfsdpfxebzg R Te Ahaeh round 440 mm square 400 mm flat 800 x 290 mm 60° 590/750 x 300 mm 45° 460/600 x 300 mm 30° 420 x 270 mm 20° 260 x 260 mm Dimensions 2870+380 x 1320 x 2700 mm (LxBxH) weight circa 7500 kg

Condition: excellent (used), Full automatic Hodpfxjy H Dmne Ahasfh Saw blade diameter 450 mm Cut range diameter 150 mm Cut off lenght 1000 mm Misc. accessories MARCELS MASCHINEN AG

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Hjdpfx Ajvxr Thjhaofh