Used Manufacturing Center for sale (49,611)

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: 2200180, travel distance X-axis: 1,600 mm, travel distance Y-axis: 815 mm, travel distance Z-axis: 815 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 20,500 W, The Saeilo Contur KV 1600 is a used vertical machining center, manufactured in 2008 by Kent Industrial in Taiwan and distributed in Germany through Saeilo. With an X-axis travel of 1,600 mm and 815 mm in Y and Z, it is suitable for long plates, housings, and fixture components that can no longer be accommodated on smaller machining centers. It is controlled by a Siemens Sinumerik 840D. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2008 - Control: Siemens Sinumerik 840D - Travel X / Y / Z: 1,600 / 815 / 815 mm - Spindle speed max.: 4,500 rpm - Spindle drive: 15 / 20.5 kW, ball screws - Tool holder: ISO 40 - Tool magazine: 32 positions - Gearbox: ZF two-stage gearbox EQUIPMENT AND ACCESSORIES - Chip conveyor Mayfran LT 200 LS - Tool holders, partially populated - Drilling and milling tools Fedoz H Uf Nspfx Ab Nogh - Two vices on the table (according to the photos) CONDITION During our inspection on October 1, 2026, the machine was not in operation. Therefore, we are selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Typical applications include plates, housings, molds, and fixtures in mechanical engineering and contract manufacturing. The long X-axis travel also allows for shuttle machining with two setups. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. The buyer is responsible for disassembly, loading, and transport; upon request, we can provide contact details for local freight forwarders. Price upon request. Please feel free to contact us via the contact form.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080092, Used CNC horizontal 5-axis twin-spindle double-table machining center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of manufacture: 2011 Machine No.: 2080092 Weight: approx. 16,000 kg Technical data: Fgedpoz E Ddfsfx Ab Noh - CNC horizontal machining center - 5-axis design - Twin spindle - Double table - Travel ranges: - X-axis: 600 mm - Y-axis: 600 mm - Z-axis: 510 mm - Rapid traverse: up to 45 m/min - Tool interface: HSK-A63 - Spindle speed: up to 17,500 rpm Equipment: Machine with standard accessories. Availability: Available in the short term.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,012 h, functionality: fully functional, machine/vehicle number: 31-46644, The HELLER MCi 16.2 is a high-precision, CNC-controlled horizontal machining center (HMC) from the German manufacturer HELLER. The machine is designed for productive and flexible series production (e.g., in mechanical engineering or the automotive sector). Equipment: -Horizontal spindle, pallet changer with rotary table, additional 4-position pallet changer (manufacturer: RILE RSP-MC+16.2, year of manufacture: 2004, serial number: 0421635093) -2nd operator terminal, chain-type tool changer with approximately 80 positions, chip conveyor (manufacturer: Knoll 600K, coolant/lubricant processing with band filter, switch cabinet, separate cooling unit (manufacturer: BKW) Fsdsz N Ewiepfx Ab Negh Control: -Siemens 840D Accessories: -Telescopic drawer cabinet (8 drawers) with attached work surface, workbench (1 door) with partition, lighting fixture Contents: various machine accessories

Condition: used, Year of construction: 2007, CNC machining center Manufacturer: SCM Type: Morbidelli Author X5 EVO 440 Year of manufacture: 2007 Technical data Fgodpfx Abez Iv Nrj Noh - Working area: 1350 x 4400 mm - Equipped with a milling spindle, drilling unit, and saw - Horizontal machining units - Original SCM software - The machine is in good working order. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,462 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 20,000 rpm, The machine spindle was replaced in 2022. Since then, the machine has accumulated approximately 6,500 operating hours. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 650 mm Travel range Z-axis: 500 mm Spindle speed range: 0–20,000 rpm Spindle speed control: stepless Tool interface: HSK 63 Magazine capacity: 30 Clamping area: 900 × 600 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,400 x 3,000 mm Weight: 10 t Operating Hours Machine operating hours: 54,796 h Spindle hours: 23,462 h EQUIPMENT Fixed angular table Fgsdpfx Abjz Hwvde Neh Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function and Top Specification. Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. work height: 500 mm Number of tool changer positions: 80 Tool holder: SK40 Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm Accessories: - Chip conveyor and tank - ICS (internal coolant supply) - Showa oil mist extraction unit - Renishaw probe The following features/options are available: - Linear scale system for X and Y axes - Tool magazine for 80 tools - Air blow unit at the workpiece - Oil mist extraction unit CRK 1500K - Coolant temperature control - Flood coolant 4.5 bar - Workpiece rinsing system - High-pressure coolant through the spindle 70 bar - Pressure switch for coolant supply through the spindle - Chip conveyor ejection right (Consep) - MAZAK Monitoring System B incl. Renishaw probe MP10 - Preparation for visual tool identification system - Detachable electronic handwheel - Milling spindle synchronous tapping - Tool tip inspection for 5-axis simultaneous machining - Tool radius compensation 5-axis - EIA dynamic tool compensation 2 (incl. 1) - Max. program memory 8 MB - Rapid traverse – constant tilt angle during movement Fgodpfx Asx Db D Asb Nsh - MAZACC-3D high-speed software package - Form compensation for rotary axes - Ethernet operation capability - High-precision control for finishing operations - Cylinder interpolation G07.1 - Signal light (3-color LED) - 3-jaw chuck 21" - Additional work area lighting The machine is in very good condition and can be inspected under power at its current location.

Condition: used, Year of construction: 2014, Vertical high-speed machining center Manufacturer: DMG Mori Type: MILL TAP 700 Year of construction: 2014 Control system: Siemens 840D SL Fjdpfxsz I Inmo Ab Njgh Travel ranges X/Y/Z: 700 x 420 x 380 mm Spindle speed max.: 24,000 rpm Tool magazine: 15 positions Weight approx.: 4,100 kg Automation with robot Manufacturer: Sontec Type: Sonflex Year of construction: 2023 Robot: Fanuc 71026ä

Condition: ready for operation (used), Year of construction: 2005, operating hours: 72,887 h, functionality: fully functional, machine/vehicle number: 32-47220, Equipment: chip conveyor, The Heller MCH 250 is a robust, horizontal 4-axis machining center manufactured by the German machine tool manufacturer Gebr. Heller Maschinenfabrik GmbH. This CNC machine is specifically designed for highly productive single-piece and series production and is frequently used for machining aluminum and steel castings. Equipment: -Horizontal spindle, 2-position pallet changer with rotary table no. 1116, chip conveyor, coolant/lubricant treatment system (manufacturer Knoll, year 2007), cooling unit, tool change system, 2nd control panel -without SL. Fjdpfsz N Eykjx Ab Nogh Control system: -Siemens 840D Accessories: -Telescopic drawer cabinet, storage shelf, clamping device, step stool (3 steps)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,649 h, functionality: fully functional, machine/vehicle number: 101161, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 920 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 14,000 rpm, A new spindle was installed one year ago! TECHNICAL DETAILS Travel in X-axis: 1,020 mm Travel in Y-axis: 620 mm Travel in Z-axis: 920 mm Swivel range of B-axis: +30° to -120° Spindle speed range: 1–14,000 rpm Tool holder: SK 40 Tool magazine capacity: 40 Clamping surface of rotary table: 1,200 × 610 mm Diameter of rotary table: 500 mm MACHINE DETAILS CNC control: Heidenhain iTNC 530 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Power: 75 kVA Rated current: 100 A Main fuse: 120 A Machine weight: 8,740 kg Fgodjz Hwutepfx Ab Neh Operating hours (according to counter) Spindle running time: 10,649 h Program running time: 11,159 h Machine operating hours: 24,317 h Control operating hours: 26,901 h EQUIPMENT Fixed rotary table NC rotary table WALTER B-axis swivel head with torque drive Vertical tool changer 3D measuring probe Heidenhain Electronic handwheel Fixed full protective enclosure with interior lighting Internal cooling system Coolant system Oil mist extraction Chip conveyor Operating manual

Condition: excellent (used), The HOLZ-HER Evolution 7405 is a used CNC machining center for continuous processing. The machine enables four-sided edge profiling and is equipped with an integrated vacuum pump and automatic suction positioning. Workpiece machining: Workpieces with a length of 200 to 3,200 mm, a width of 70 to 920 mm, and a thickness of 8 to 70 mm can be processed. Hardened and dust-protected prism guides, as well as ball screw spindles on all axes, are part of the machine equipment. Milling and tool changing: The main spindle has a motor power of 6.5 kW and a speed range of 1,000 to 18,000 rpm. The main spindle has an HSK-F63 tool holder. The pick-up tool changer provides space for 6 tools. Drilling and sawing unit: The XL drilling head has 13 vertical drilling spindles, two horizontal twin drilling spindles in the X-direction, and one horizontal twin drilling spindle in the Y-direction. A sawing unit with a 120 mm saw blade diameter is integrated for grooves in the X-direction. Control and equipment: The machine is controlled via CAMPUS HOPS. The equipment also includes a network card for remote maintenance, an integrated control cabinet with control cabinet cooling via a heat exchanger, a handheld operating device, and an automatic central lubrication system. Extraction and connections: The extraction connections are 2 x 120 mm and 1 x 140 mm. A volume flow rate of 4,100 m³/h, a static negative pressure of 2,500 to 3,000 Pa, and an air velocity of 30 m/s are required. The compressed air connection requires 6 bar with a compressed air requirement of 300 l/min. Condition: The machine is offered as a used machine, has been inspected, and is ready for immediate use. Quality information: - complete basic cleaning Fodpfx Abjyrp Sro Nogh - electrical system checked - pneumatic system checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, functionality: fully functional, Mazak VTC 800/30SR CNC machining center (2009) Manufacturer: Mazak Type: VTC 800/30SR CNC machining center Year of manufacture: 2009 Condition: used, currently in production Operating hours: 34,000 hours Fgodpfx Abezy Ac Se Njh Spindle speed: 18,000 rpm Tool magazine: 48 tools Further information will follow.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: MITSUBISHI, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 250 mm Spindle speed range: 60–15,000 rpm Spindle speed control: stepless Tool changer: vertical Magazine capacity: 12 Tool interface: SK 30 Workpiece clamping area: 400 × 250 mm MACHINE DETAILS Control system: MITSUBISHI Jaw width: 100 mm EQUIPMENT Fixed angular table Dual-pallet changer 4 × Allmatic vices Various tool holders SK 30 Electronic handwheel Full-protection enclosure with sliding doors and interior lighting Coolant system with paper band filter Coolant system Two-color signal light Fgjdpoz Hxb Ujfx Ab Nsh Chip conveyor 6 × Machine feet Operating manuals

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 Fgsdpfxszzd Dme Ab Noh 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, CNC Vertical Machining Center DECKEL MAHO DMC 850 V Fgedpfx Aez I Dcaob Njh With Heidenhain TNC 640 control system Year of manufacture: 2016 Travel ranges: X 850 Y 520 Z 475 Spindle speed range: 0 – 20,000 rpm, stepless With the following accessories: Fixed angular table, clamping surface 1160 mm x 575 mm Vertical tool changer with 30 magazine slots (HSK 63) 3D measuring probe Heidenhain TS 649 Electronic handwheel LED light strip Polycarbonate safety screens Full protective enclosure with sliding doors and interior lighting Operating modes 3 + 4 Compressed air supply for linear measuring systems Spindle oil cooler Chip conveyor Chip flushing system Chip flushing gun Coolant system (reinforced coolant pump) 4 adjustable machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,600 mm Travel in Y-axis: 400 mm Travel in Z-axis: 400 mm A-axis: 360° × 0.001° A-axis speed: 20 rpm Spindle speed: 0–9,000 rpm Speed control: stepless Tool interface: DIN 69871 SK40 Working feed rate: 5–28,000 mm/min Rapid traverse rate X/Y/Z-axis: 28,000 mm/min Fgodpfx Aoz Izdheb Noh Table design: Bridge table with 4 sides Table length: 1,800 mm Table width: 113 mm Table load capacity: approx. 150 kg Magazine design: Chain magazine Magazine capacity: 44 Max. tool diameter: approx. 70 mm Max. tool diameter with free adjacent positions: approx. 200 mm Max. tool length: approx. 240 mm Max. tool weight: 5 kg Max. total weight of tool magazine: approx. 200 kg Tool change time: approx. 8 s MACHINE DETAILS Control system: Siemens Sinumerik 810D Total power consumption: 14 kW Dimensions & Weight Dimensions (L x W): approx. 6,500 x 3,500 mm Machine weight: approx. 9,000 kg Operating hours: 19,357 h EQUIPMENT Second milling spindle Exchangeable milling spindle Coolant system (coolant tank: approx. 480 l) Internal cooling External cooling Clefil RBF-E100 unit (coolant pressure: 20 bar) Clamping system Hydraulic clamping options in the machining area Pneumatic clamping options in the machining area Römheld hydraulic unit (max. hydraulic pressure: 500 bar) Additional equipment Chip conveyor Coolant nozzle in the machining area Enclosed work area enclosure according to UVV Automatic measuring probe RWP20.00 Various SK40 tool interfaces Technical documentation Layout plan

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Fanuc Series 18-M, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Fodez Ir Iwopfx Ab Nogh Rapid traverse rate, X-axis: 30,000 mm/min Rapid traverse rate, Y-axis: 30,000 mm/min Rapid traverse rate, Z-axis: 30,000 mm/min Table length: 650 mm Table width: 500 mm Spindle speed: 10,000 rpm Speed ranges: 2 Spindle interface: ISO 40 Tool positions: 30 Tool selection: Random MACHINE DETAILS Control system: Fanuc Series 18-M Coolant pressure: 20 bar Dimensions & Weight Dimensions (L x W x H): 3,140 x 2,090 x 2,900 mm Weight: 7,000 kg

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 450 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 495 mm, workpiece weight (max.): 200 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, controller model: TNC 640, coolant supply: 20 bar, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rotary table diameter: 320 mm, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, The LAGUN L 5AX 320 5-axis simultaneous machining center with a cross table design stands for highest precision, robust construction, and economical production. Ideal for mechanical engineering, mold making, and contract manufacturing, as well as for demanding and complex machining tasks. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24 months warranty Fjdpeh Ekqyofx Ab Nsgh Technical features: Control system: • HEIDENHAIN TNC 7 digital control system • HEIDENHAIN 19" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal articulated strip chip conveyor ✔ Full enclosure with side-opening viewing windows ✔ Ergonomic control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and prepare an individual offer for you.

Condition: new, type of input current: AC, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, table length: 1,000 mm, table width: 460 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 36,000 m/min, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS, table load: 400 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L 850 – available for short-term delivery The LAGUN L 850 machining center with a cross table configuration stands for high precision, robust design, and economical production. Ideal for mechanical engineering, mold making, and contract manufacturing, as well as for a wide range of demanding machining tasks. Your advantages: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24-month warranty Technical equipment: Control system: • HEIDENHAIN TNC 7 basic digital path control • HEIDENHAIN 16" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal articulated belt chip conveyor ✔ Preparation for the integration of a rotary table ✔ Full enclosure with side-opening viewing windows ✔ Ergonomic L-shaped control panel Fsdpfsm Tv Sbjx Ab Njgh Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and prepare an individual offer.

Condition: excellent (used), JD manufacturing kettle crisps batch fryer. Gas fired. 55-60kg every 8-10 mins depending on product. With pumps and Valve systems. For "hand cooked" crisps. Frying area is approx. 1.2 m wide x overall length 3 m. Fsdpfx Abez E Skgs Negh I can supply the whole line for producing crisps 1ton a hour.

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, CNC Vertical Machining Center DECKEL MAHO DMU 50 eVolution With Heidenhain iTNC 530 path control Year of manufacture: 2004 Fjdpfx Ajz Ia I Sob Negh Travel ranges: X 500, Y 420, Z 380 Spindle speed range: 0 – 18,000 rpm, stepless (SK 40) With the following accessories: 2-axis NC rotary table 500mm x 380mm Vertical tool changer with 32 magazine slots Full enclosure with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 3D measuring probe Coolant system 4 adjustable machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2000, operating hours: 23,574 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! Fgjdpfoz Izavjx Ab Noh The following components of the machine have been renewed: Motor and pump of the hydraulic system Hydraulic and pneumatic hoses (partially) Control cabinet LT module replaced Drum of the Knoll system TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm B-axis: 360 x 0.001 (60 rpm) Spindle speed: 8,000 rpm Table size: 6 pallets, each 500 x 400 mm Table width: 400 mm Table length: 500 mm Table load capacity: 350 kg Working feed rate: 1 - 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS Control model: Siemens Sinumerik 840D Overall length: 7,000 mm Overall width: 5,000 mm Coolant supply: 50 bar Coolant system: approx. 1,100 L Motor power: 13 kW / 20 kW Torque: 124 / 191 Nm Total power consumption: 20 kW Dimensions & Weight Space requirement (L x W): 7 x 5 m Machine weight: approx. 16,000 kg Operating hours Power-on counter: approx. 48,804 h Spindle running time: 23,574 h total EQUIPMENT Documentation/manual Speed infinitely adjustable Chip conveyor Knoll cooling unit with drum filter (30/40/50 bar via M-command) Tool measurement: Renishaw measuring probe Tool breakage monitoring in the machining area Pallet storage space (4 places) Pallet sequence operation Enclosed work area enclosure according to UVV Network capability Technical documents & layout plan

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 645 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 3,400 mm, total length: 4,430 mm, total width: 2,910 mm, overall weight: 11,000 kg, Equipment: CE marking, documentation/manual, The LAGUN L 5AX 500 5-axis simultaneous machining center with a cross table design stands for highest precision, robust construction, and economical production. Ideal for mechanical engineering, mold making, and contract manufacturing, as well as for demanding and complex machining tasks. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24-month warranty Technical equipment: Control system: • HEIDENHAIN TNC 7 digital control system • HEIDENHAIN 19" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Including the following accessories: Fodpfsfdxhaox Ab Nsgh ✔ Longitudinal articulated belt chip conveyor ✔ Complete enclosure with side-opening viewing windows ✔ Ergonomic control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and create an individual offer for you.

Condition: used, Year of construction: 2011, CNC machining center Manufacturer: Homag Type: BMG311 Venture 316L Year of manufacture: 2011 Technical data Fodoz E Hpdopfx Ab Nsgh - Design: 5-axis CNC machining center - X-axis travel: 4,200 mm / 4,375 mm (with hole diameter 25 mm) - Y-axis travel: 1,400 / 1,550 mm (limitation in drilling operations) - Z-axis travel: 250 mm - Workpiece thickness: up to approx. 250 mm - Cantilever table: 8 cantilevers, LED positioning aid - Vacuum: 2 vacuum pumps, 100/140 m3/h and 90/108 m3/h - Main spindle: 5-axis, 10 kW Drive5C - Speed: 1,500 - 24,000 rpm - Tool holder: HSK 63 - Tool changer: 18 positions - Drilling head: 21 spindles, V17/H4/S0/90, 2.2 kW - Control system: powerControl PC85 - Software: WoodWOP 6.1 - Monitor: 17" TFT - Operating system: Windows XP Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis Fedpfx Asz Nfireb Negh - Approx. 25 tool holders incl. tools - Machine vise - Coolant gun - 3 Renishaw probe styli - Coolant tank - Original documentation.

Condition: new, Year of construction: 2024, functionality: fully functional, - Weight approx. 11,8 Kg Fgsdpfx Aspz Ib Eob Njh - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, thus crane capacities, man hours and energy are saved if machines are used for this purpose, you have to crane to the machine and then also back again to the commissioning area - the time loss for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing at the machine) - All components are made in Germany - Centering Din 333 form A, 60°, 5, 6,3 and 8 mm. Other wishes are also possible.