Used Measuring Plate for sale (16,927)

Condition: used, functionality: fully functional, Year of construction: 2004, Sergi Power Bending Rolls Manufacturer: SERGI S.R.L. (Italy) Model: Export Capacity: 1550 x 6mm S/No.: 1865 Year: 2004 Max. working width: 1550mm Max. bending thickness mild steel: 6mm Roll diameters: 150mm Pinch Pyramid Manual Drop End Nodpfszl Up Uox Alaold Forward reverse foot control

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy panels with new suction cup rubber Load capacity: 150 kg horizontally and vertically Suction cup can be swivelled 90 degrees by motor Suction box: 1000 x 675 mm Audible warning signal in case of too low vacuum 400V, 1.5kW Can be attached to an existing chain hoist Nlsdpfx Alsv S Synjaod CE marking No inspection certificate available Suction cup rubber has been replaced As new condition The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this supplier".

Condition: ready for operation (used), Year of construction: 2006, sheet width 3030 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.50 mm no. of strokes 34 Hub/min cutting angle 1.6 Grad table height 820 mm distance between columns 3120 mm Control POS 100 engine output 2x 4.0 kW weight of the machine ca. 3600 kg range L-W-H 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros (!!) Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a "DUO-CUT drive" on both sides. Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge * with SCHRÃ?DER POS 100 NC control system * digital position display for the backgauge * adjustable from the front right * with setpoint/actual value input * stepless adjustment over the entire travel range * Limit values secured with limit switches * 9-program programming possible - Break-resistant, torsion-free welded steel construction Nodjzn Ahdepfx Alajld - Compact and well-organized machine design - All-steel blades - 1x hold-down bar - 1x long side stop with â??ELGOâ? digital display - 2x front support arms, adjustable â??Sliding Systemâ? - Work table with recessed handles - Rear safety guard - 2x emergency stop buttons at the front - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 2013, length / mm width / mm height / mm Becker Vacuum Clamping System U 3.6 S-09 – 230 V – Year 2013 – Complete with Vacuum Pump, Vacuum Tank & Vacuum Table For sale is a complete Becker vacuum clamping system consisting of a Becker vacuum pump, model U 3.6 S-09, a vacuum tank (reservoir), a vacuum clamping table, and the mounting accessories shown in the photos. The system was previously used in an industrial environment and is ideal for CNC routers, machining centers, woodworking, plastics processing, fixture holding, and other vacuum clamping applications. Technical Specifications Manufacturer: Becker Model: U 3.6 S-09 Year of Manufacture: 2013 Power Supply: 230 V, Single Phase Motor Power: 0.30 kW (50 Hz) / 0.36 kW (60 Hz) Speed: 1380 / 1650 rpm Inlet Capacity: 6.4 / 7.4 m³/h Nljdpfxjzn Aiuj Alajd Maximum Vacuum: 10 mbar Protection Class: IP54 Scope of Delivery Becker vacuum pump U 3.6 S-09 Vacuum tank / reservoir Vacuum clamping table Clamping rails Mounting and clamping accessories (as shown in the photos) Condition The vacuum clamping system is in good used condition with normal signs of wear consistent with industrial use. It was removed from a fully operational machine. The sale includes everything shown in the photographs. Inspection is welcome by appointment. Shipping or collection can be arranged by mutual agreement. Plate size: 440 x 280 x 50 mm

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° Nodpfjznngxsx Alaold back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: not inspected (used), Year of construction: 2020, functionality: unexamined, machine/vehicle number: 71193, ● Condition: Not tested ● Location: 47906 Kempen ● Availability: By arrangement ● Payment terms: Advance payment by bank transfer ● Internal no.: ZM3 Technical data: Measuring volume: 3000 mm Accuracy: 0.045 mm Scope of delivery: ● With laptop and software as shown in the pictures (completeness not guaranteed) ● With transport case Dimensions & weights: ● Setup dimensions (L x W x H approx.): 1000 x 500 x 1000 mm ● Weight approx.: 30 kg Additional information: ► Transport to the destination can be offered upon request Nodpfx Aoy Sawtolaeld ► The quoted price is net plus VAT ► The goods are sold under exclusion of any warranty ► Technical data without guarantee ► Subject to prior sale ❗The sale of the goods is strictly to commercial customers only❗

Condition: used, functionality: unexamined, With this offer, you are purchasing a second-hand ‘Keyence XM-5000’ coordinate measuring machine Items for sale: 1x Keyence XM-5000 with the following accessories Includes a laptop with the relevant software Includes a carrying case Includes a battery charging station Includes a tripod Condition: Nedoy Iaayspfx Alajld This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: defective spare-parts repository (used), functionality: limited functionality, In this listing, you are purchasing a faulty ‘Keyence XM-1200’ coordinate measuring machine Item for sale: Nljdsyrcx Sjpfx Alajd 1x Keyence XM-1200 with the following accessories including the accessories shown in the photos Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device is not in working order Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Nlodjzpbrqopfx Alaod Good condition

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Keyence VL-500’ 3D coordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features Includes software Includes additional software Nodpfx Asy Iaa Telaeld Includes a laptop for operation Includes a calibration plate Ready for immediate use Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, length n.n. mm width n.n. mm total power requirement 0 kW weight of the machine ca. n.n. t dimensions of the machine ca. n.n. m Some spotting plates in different sizes, without table legs. Price per sqm. We have following sizes: Njdjznndwjpfx Alasld 1500 x 1000 mm 1000 x 1000 mm (2 pieces) 1000 x 800 mm 600 x 500 mm 400 x 300 mm 210 x 130 mm round with diameter of 520 mm.

Condition: excellent (used), Year of construction: 2003, table length 900 mm Njdpfxox Szp Dj Alaold table width 900 mm x-travel 457 mm y-travel 508 mm z-travel 406 mm control Brown & Sharpe weight of the machine ca. 250 t dimensions of the machine ca. 1300 x 1000 x 1600 m

Condition: excellent (used), Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1600 mm control DEA B3C-LC workpiece weight 4500 kg Nlsdpfx Alexb Eg Neaed table surface area 4730 x 1465 mm tool taper RENISHAW PH10M weight of the machine ca. 4 t dimensions of the machine ca. 4 x 3,8 x 3 m

Condition: good (used), Year of construction: 1996, sheet width 3050 mm plate thickness 6.5 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable 750 mm work height max. 770 mm no. of strokes 11 - 22 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 5 voltage 380 V engine output 11.0 kW weight of the machine ca. 5000 kg range L-W-H 3950 x 1750 x 1720 mm Features: - Electro-hydraulic / slide-guided panel shear - HACO NC control, Model SC 5, front left * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction of the backgauge * Emergency stop switch - Electromotor-driven backgauge, mounted on ball screws - Hydraulic sheet metal hold-down devices - Front finger guard Nlsdpfxszndq To Alaod - 1x long side stop - 1x freely movable foot switch - Operating instructions in German (PDF)

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Setup operation: 0 - 70 mm/s Series measurement operation Nedpjzn Iucofx Alaeld Axis: max. 300 mm/s Vector: max. 425 mm/s Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Various measuring probes Measuring head

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm Njdpfsthuzpjx Alasld dead weight 28 ton. good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, Nljdpfxeznn Hlo Alaod angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Cutting system Plasma PA-S 150 total power requirement 4,5 kVA Nljdpfxszmy Tbe Alajd weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm

Condition: used, Tool presetting machine SOMET, type SPS 500 U Machine no. S1, Year of manufacture 1987 Table surface 545 x 1000 mm Travel ranges X = 500 mm, Y = 340 mm Width in the portal 550 mm Height table - lower edge of portal 250 mm Nsdpfxedzqrte Alaold - Longitudinal guide on the portal, right and left of the table - Adjustment via very fine lead screws with handwheel - Quick adjustment via electrical release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 units of clamping devices for tool measurement - mounted on a base with storage compartment and drawer Space required L x W x H: 1100 x 700 x 1650 Weight 560 kg In good condition

Condition: used, Year of construction: 2016, Manufacturer: LEICA, Type: Absolute Tracker AT960-MR, Year of manufacture: 2016, Serial number: 750931, Scan module: T-Scan 5, Probe module: T-Probe iii, Tripod, 2 transport cases, software dongle, control unit, notebook. Manufacturer: Dell, Precision 7710, Intel Core i7, 2x 27" TFT monitor, Manufacturer: Dell, wireless keyboard, wireless mouse. Nedszn Ar Aepfx Alaeld +++ Attention: This item is part of an online auction! +++

Condition: used, Year of construction: 2010, Mobile measuring arm for measuring machine, measuring device Manufacturer: Zett Mess Type: AMPG 2400 Precision Njdpfowu E D Rjx Alajld Year of manufacture: 2010 – unused Measuring diameter: 2,400 mm 22726

Condition: excellent (used), Year of construction: 2001, sheet width 4000 mm plate thickness 16 mm Nledpfx Aoy Diahelajd total power requirement 37 kW weight of the machine ca. 20 t dimensions of the machine ca. 4700 x 2100 x 2000 mm

Condition: used, Year of construction: 2001, controller manufacturer: Sonstige, controller model: WPC 2040, _____ Nodpfx Aoznqy Ielasld Description: Year of manuf. : 2001 Control : Sonstige WPC 2040 Movement X/Y/Z : mm Technical Data: Measuringrange in X/Y/Z:800 x 1.000 x 700 mm Tablesize:1.040 x 1.780 mm Workpieceweight (max.):800 kg Equipment/Accessory: Probesystem:Renishaw PH 10M Measuringhead:Renishaw TP 200 Changesystem:Renishaw SCR 200 Operation:Joystickbox HT100 Further Accessory:Misc. stylus and calibration sphere

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 3260 mm -Width: 1380 mm -Piston diameter: Ø 63 mm -Stroke: 200 mm Nodpfx Ajzbhqxelajld -Pressure force: t -Overall dimensions: 3260/1380/H1940 mm -Weight: 2820 kg

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Cutting height 1.800 mm machine weight ab. ca. 600 kg kg Nsdpfeygm Tiex Alaeld