Used Milltap 700 for sale (5,795)

Condition: used, Technical specifications for the wide-span racking: Racking system: Stow Type: Midirack Specifications for the installation: Number of rack rows: 01 unit Rack length: 2,810 mm Number of bays per rack row: 01 unit Number of levels incl. ground level: 05 units Scope of delivery includes: 02x End frames, used Nwjdpfxsv Hzfvo Ag Ioc Material finish: Sendzimir galvanized Upright profile dim.: 55 x 45 x 1.5 mm incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled 2,000 mm high 700 mm deep 10x Beams, used Material color: yellow Z-profile: 74 x 30 mm Connector: 2 hook Clear span: 2,700 mm 20x Safety pins, used Material finish: Sendzimir galvanized For securing the beams against accidental dislodging 05x Chipboard panels, used Thickness: 22 mm Width: approx. 2,680 mm Depth: approx. 690 mm Surface: possibly coated (possibly two-part) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping is required beyond collection, additional costs will apply. These can be requested from us depending on the delivery location and scope.

Condition: good (used), Technical data for the shelf connector: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x shelf connector, used for shelf spacing: 700 mm Total length: 700 mm Cross section: U 35x25 mm Material thickness: approx. 2.00 mm Material color: blue Drill hole diameter: 11 mm Weight: 0.930 kg | piece 02x screws M10 x 35 mm Nedevpvyyopfx Ag Ijwc 02x nuts M10 Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical specifications for wide-span shelving: Racking system: Stow Type: Midirack Installation details: Number of shelf rows: 01 pc. Shelf length: 1,910 mm Number of bays per row: 01 pc. Scope of delivery: 02x shelf uprights, used Material finish: Sendzimir galvanized Upright profile dimensions: 55 x 45 x 1.5 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled Height: 2,000 mm Depth: 700 mm 10x shelf beams, used Material finish: white Z-profile: 77 x 32 mm Weight | per piece: approx. 3.95 kg Connector: 2 HK (hooks) Clear span: 1,800 mm 20x locking pins, used Material finish: Sendzimir galvanized For securing the beams against accidental lifting 05x chipboard panels, used Thickness: 22 mm Width: approx. 1,780 mm Depth: approx. 690 mm Surface: possibly coated (possibly in two parts) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Njdpov Iakgjfx Ag Iewc This item is offered for collection only. If transport or shipping is required, this will incur additional costs, which can be requested from us depending on the delivery location and scope.

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. 7900 kN clamping force. 500 mm plunger stroke Nwodpfx Aefbl E Seg Ijc Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) The machine is DISMANTLED. Has been repainted recently.

Condition: excellent (used), Year of construction: 2008, operating hours: 67,848 h, clamping force: 700 kN, screw diameter: 35 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, Injection molding machine Arburg 370S-700-290 Product Code: 232 Availability: In Stock Year of production: 2008 Brand: Arburg Technical data Shot Weight: 132 g Clamping Force: 700 kN Screw dia: 35 mm Injection pressure: 2000 bar Tie bar distance: 370x370 mm Platen size: 510x510 mm Mould height min.: 200 mm Nwjdpfx Agevwcbgo Isc Total day-light max: 600 mm Type of controls: Selogica Language: German Power: 23,9 kW Workinghours: 67848 h Weight: 3300 kg Dimensions: 3,8x1,5 m Hopper: No Euromap: Yes Air valve: Yes

Condition: like new (used), Year of construction: 2000, Renz Super 700 and heavy-duty paper drilling machines. Heavy-duty machine, with a new drive system, designed for continuous drilling and perforating. Drilling width up to 700 mm (27.5″) with the Super 700. Simple operation with footswitch control. Horizontal paper insertion ensures drilling accuracy on large formats. Furthermore, this design allows creasing or tear-off perforation at any sheet position. Nsdpfxjxu Uqke Ag Iewc Open-end construction allows double-length format drilling. Extremely high drilling capacity, and another significant advantage of the RENZ Super 700 is that punching dies from most competing manufacturers can be used by changing the mounting adapter. Die changes are quick and simple. These machines can utilize split dies that feature 2 pitches or types in the same die, reducing setup time when changing drilling patterns. INCLUDED TOOLS: - 2:1 PITCH 6x6mm HOLES - 3:1 PITCH ROUND HOLES 4.5mm - 3:1 PITCH ROUND HOLES 4.5mm WITH CALENDAR SLOT

Condition: used, machine/vehicle number: 006089, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 30 m/min Nwjdpfoim S Hqox Ag Isc Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, Complete plant, Centrifuge E 700 H/1, Drum dimensions 690/720/600 mm, Drum capacity 120 L, Speed 735 rpm, Wall thickness 12 mm, Material GS 45, Max. loading 300 kg, Charges per hour: 10, Heating power 8 kW, Operating voltage 380 V, Total connected load 35 A, Lifting device for loading, Vibratory chute for chips and parts, 3 separator drums with different hole patterns. Chip conveyor belt to scrap container. The unit can still be demonstrated under power. Ex production site: Dismantling and loading not included in the price. Assistance and forklift are available. The dismantled components weigh a maximum of 2 tons. Nedpfx Agsw Evy Rs Iowc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, operating hours: 22,000 h, input voltage: 400 V, input current: 54 A, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 20 m/min, total height: 1,850 mm, total length: 8,600 mm, total width: 1,700 mm, overall weight: 4,400 kg, compressed air connection: 7 bar, feed length X-axis: 8,000 mm, pressure: 7 bar, product height (max.): 60 mm, IMA ICOSTS control, touch panel, edge band magazine, 2x spraying devices, pre-milling unit, preheating zone, crosscut saw, straight and radius milling units, corner rounding unit, scraper unit, smoothing unit, polishing unit. Industrial machine in very good technical condition, kept in constant operational readiness. Operated in a single-shift system. The device has been used exclusively as a support unit during periods of increased order volume. A video of the machine in operation and additional photos can be provided to interested parties. Nwedpfxjxctwrj Ag Ijc

Condition: used, Year of construction: 2003, Control BWO tip circle diameter max. 700 mm root circle diameter min. 50 mm height of profile max. 35 mm number of spindle speeds 0 - 5400 min-1 table load capacity max. 500 kg Nwsdpjxt Ur Sefx Ag Isc Overall size 370x220x300 cm Total weight, approx. 15000 kg Number of working hours 94082 h Equipment: BWO control system All axes CNC controlled Oil mist extraction Coolant cleaning system with cooling unit Dittel balancing unit Accessories: Grinding wheels Ø400mm incl. Grinding wheel flanges 1 diamond dressing roller, manufacturer Dr. Kaiser, Ø160mm Counterholder tip Control cabinet: Width 70 cm x length 280 cm x height 220 cm Machine: Width 220 cm x length 370 cm x height 300 cm Coolant system: Width 170 cm x length 240 cm x height 250 cm

Condition: excellent (used), Year of construction: 2011, Control system MXS 850 IV Data: Max Swing over bed 755 mm Max swing over support 740 mm Max Turning diam. 366 mm Turning length 785 mm Movements X 260 mm Y 100 +-50 mm Z 795 mm Rapid transport X/Y/Z 30/20/50 m/min Spindle power 26/22 kW Spindle speed 4,000 rpm Bar Capacity 80 mm Chuck diameter 250 mm Spindle nose JIS A2-8 Spindle indexing 0.001° Sub Spindle power 11/7,5 kW Sub Spindle speed 6,000 rpm Sub Bar cap. 80 mm Sub spindle Chuck diameter 150 mm Sub Spindle nose JIS A2-5 Sub Spindle indexing 0.001° Nwodpfx Ajyilzhog Ioc Number of tools in turret/driven 12/12 pcs. Power driven tools 5.5 kW Spindle speed driven tools 6,000 rpm Machine weight 6,200 kg Machine dimensions LxWxH 4.34 x 2.00 x 2.120 m Equipment: Chip conveyor, 3-jaw chuck Kitagawa BB-210 in main Spindle and a Kitagawa B 206 in Sub Spindle, Part catcher, Various tool holders, Parts catcher, Interface for Bar-Feed, Synchronised threading, The machine has 17800 work hours.

Condition: new, Year of construction: 2026, Diameter of saw wheels 700 mm Max. cutting height 460 mm Max. cutting width 680 mm Table height from floor 940 mm Table size 1030x710 mm Tilting table 20° (45 NO CE) Max.-min. lengthof blade max/min 5180/5040 mm Max. width of blade 40 x 0,6 mm Motor power 3kW (HP 4) R.P.M. of wheels 736 R.P.M Dust extrac. outlet 2 x Ø 100 mm Overall dimensions 2300x1415x880 mm Net weight 400 Kg Gross weight (crate) 490 Kg Njdpfjgyd Skex Ag Ijwc Gross weight (case) 520 Kg Shipping volume 2,30 m3 Sound power level 88,9 db

Condition: good (used), Year of construction: 1994, functionality: fully functional, Table tiltable via handwheel, lower and upper roller guide, brake motor 400 Volt, 3 kW. Transport available at an additional cost! Njdoybllyopfx Ag Iowc

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Productivity: 50 tph 1-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Nsdpeykafgefx Ag Iewc Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane 3- Model : VSI 800 -CR Max Feed : 50 mm. Rotor Diameter : 1000 mm. / Off Std. Rotor/Closed Rotor Rotor Speed : 50-70 m / s. Drive : 180 kW / 1500 rpm. Capacity : 70-100 tons / hour 0-5 sand production at 5-50 mm feed. Total Capacity : 100-150 tons / hour VSI-900-CR 1. Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) 2. Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) 3. Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) 4. One-sided maintenance platform with ladder. 5. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 6. Vibration sensor switch 7. Maintenance Crane 3-Model : VSI 900 -CR Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane

Condition: good (used), functionality: fully functional, machine/vehicle number: 241076.1, roll diameter: 50 mm, roll width: 700 mm, total width: 790 mm, total height: 110 mm, total length: 2,185 mm, conveying length: 2,185 mm, TAF article number: 241076.1 Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 2,185 x 790 x 110 mm (LxWxH) Cheek width: 790 mm Nwjdpjt Tx Sijfx Ag Ijc Cheek height: 100 mm Conveyor length: 2,800 mm Conveyor width: 700 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 120 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 700 mm, roll pitch: 120 mm, total width: 790 mm, total height: 110 mm, total length: 1,100 mm, conveying length: 1,100 mm, construction width: 790 mm, construction height: 110 mm, TAF article number: 1000004058 (241076.3) Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 1,100 x 790 x 110 mm (LxWxH) Side panel width: 790 mm Cheek height: 100 mm Conveyor length: 1,100 mm Conveyor width: 700 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 120 mm Nwodpfot Tyc Nex Ag Iec Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 700 mm, roll pitch: 120 mm, total width: 790 mm, total height: 110 mm, total length: 36,125 mm, conveying length: 36,125 mm, construction width: 790 mm, construction height: 110 mm, axle spacing: 120 mm, TAF article number: 1000004055 (241076.4) Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 36,125 x 790 x 110 mm (LxWxH) Cheek width: 790 mm Cheek height: 100 mm Conveyor length: 36,125 mm Conveyor width: 700 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 120 mm Roller diameter: 50 mm Nwedjuiha Topfx Ag Iec Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 700 mm, total width: 790 mm, total height: 110 mm, total length: 2,040 mm, conveying length: 2,040 mm, TAF article number: 1000004057 (241076.2) Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 2,040 x 790 x 110 mm (LxWxH) Cheek width: 790 mm Cheek height: 100 mm Conveyor length: 2,040 mm Conveyor width: 700 mm Roller type: Steel Rollers per axle: 1 piece Nwjdpfst Tybrjx Ag Ioc Roller pitch: 120 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer - year of manufacture 1993 - log diameter max 1300 mm Njdpfx Agst Hf T Hs Ijwc TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, spindle diameter: 30 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table length: 2,070 mm, extraction connection diameter: 100 mm, height adjustment type: mechanical, milling spindle length: 130 mm, spindle speed (max.): 10,000 rpm, working length of spindle: 130 mm, Equipment: motor brake, – Year of manufacture: 2012 – Austrian production – Spindle adjustable from 0° to 45° – Sliding table for tenoning operations – CE marking TECHNICAL SPECIFICATIONS: – Spindle diameter: 30 mm – Spindle height: 130 mm – Maximum tool diameter (allows use of large milling tools): 230 mm – Maximum tool diameter at 45°: 125 mm – 4 spindle speeds: 3500 / 6500 / 8000 / 10000 rpm – Main motor power: 5.5 kW Nodpjycqiyefx Ag Iswc – Electric motor with brake – Table dimensions (L x W): 780 x 970 mm – Sliding table dimensions (L x W): 2070 x 350 mm – "x-Roll" sliding table – Manual height adjustment – Manual angle adjustment: 0° - 45° – Quick-change spindle system – Fence on carriage – Additional table on carriage – Right/left rotation – Extraction port diameters: 100 and 80 mm – Transport dimensions (L/W/H): 220 x 90 x 150 cm – Weight: approx. 350 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° Nodewp Ri Uepfx Ag Ijwc - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Nedpex S Rcmofx Ag Iowc

Condition: ready for operation (used), Year of construction: 1989, Travel X/Y/Z: 700mm/500mm/600mm, speed: 6300rpm, power: approx. 10kW, feed X/Y/Z: 4m/min, rapid traverse X/Y/Z: 10m/8m/10m/min, machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, weight: approx. 6000kg, operating hours: 65425h. On-site inspection is possible. Nodpfx Agjwmqxkj Iswc

Year of construction: 2001, condition: ready for operation (used), Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement. Nedpfexx Ufijx Ag Ijwc

Year of construction: 2016, condition: ready for operation (used), A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible. Nedpjxtfgysfx Ag Iswc