Used Milltap 700 for sale (5,919)

Condition: excellent (used), Year of construction: 2003, WELL-MAINTAINED MACHINE FROM A HOBBY WOODWORKING SHOP Table dimensions: 990 x 750 mm Router spindle diameter: 30 mm Router spindle speed: 3,700 / 6,500 / 7,890 RPM Diameter of router tool, max.: 230 mm Router spindle can be tilted: 0 - 45 degrees Router spindle height above table, max.: 120 mm Motor: 5.5 kW Router spindle can be switched for clockwise/counterclockwise rotation Sliding table with additional table support Additional extraction hood as a replacement for the fence, e.g., for sanding Hold-down device / safety system, e.g., when routing narrow parts Weight: approx. 540 kg Iiedpfx Aoznk Ilsclef Dust extraction connections: 1 x 120 mm, 1 x 80 mm Optionally available: 3-roller feed device FELDER F-34, item no. 4754

Condition: used, Year of construction: 2019, functionality: fully functional, Laser engraving machine, Trotec Speedmarker 700 Year of manufacture: 2019 Isdpjzudyujfx Acleif Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us.

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition Iisdpfx Aexy Styjcljf

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Iiedpfxowd Szbo Aclof Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Weight approx. 2800 kg Good condition

Condition: used, TECHNICAL DETAILS - Disc : 2x - Connection : 50 Hz 3x400 V Iiodpfxow Ulnhe Aclef - Machine weight : 3200 [kg] - Number of hours under power : 94 787 [h] - Wheel diameter : 700 [mm] - Wheel height : 200 [mm] - Max. height of the workpiece : 100 [mm]

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 1 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. bar diameter : 80 [mm] - Max. machining length : 728 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/- 50 [mm] - Tool type : BMT - Live tools speed : 6000 [rpm] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM5 - Tailstock stroke : 650 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.110 x 1.922 [mm] - Machine height : 2.120 [mm] - Machine weight : 6.100 [kg] MACHINE HOURS - Number of hours under power : 26654 [h] - Number of working hours : 15488 [h] EQUIPMENT - CNC : CELOS - Interactive programming : MAPPS 4 - Interface : USB, PCMCIA, RJ45, RS232 - Tool probe : Renishaw - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor Iijdex Tvklopfx Aclof - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO 80 S2 - Number of fixed tool holders : 9 - Number of turning tool holders : 3 - Electric transformer - Collet chuck

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of turrets : 1 - Number of axes : 6 MAIN SPINDLE - Spindle nose : A2-8 - Max. bar diameter : 80 [mm] - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 x 795 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] COUNTER-SPINDLE - Spindle nose : A2-5 - Max. bar diameter : 51 [mm] - Max. turning diameter : 190 [mm] - Spindle power : 11 [kW] - Spindle speeds : 6.000 [rpm] - C axis indexing precision : 0,001 [°] - Travel : 760 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 42 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.414 x 2.370 [mm] - Machine height : 2.115 [mm] - Machine weight : 6.200 [kg] MACHINE HOURS - Number of hours under power : 15525 [h] - Number of working hours : 12865 [h] Iijdpfx Acjx Tvkrslef EQUIPMENT - CNC : Mitsubishi MSX-850II - Interactive programming : MAPPS III - Interface : USB / PCMCIA / RJ45 - Tool probe : Renishaw - 3 colors status lamp - Tailstock function - Coolant tank - Chips conveyor : Droite - Spindle cooling unit - Parts catcher - Bar loader : LNS Quick LoadSERVO 80 - Parts conveying strip - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Chuck 3 jaws

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 90 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/-50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 41 [kW] MACHINE HOURS - Number of hours under power : 21392.8 [h] - Number of working hours : 13797 [h] EQUIPMENT - CNC : CELOS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : MAPPS V - 3 colors status lamp - Coolant tank : KNOLL * with high-pressure pump : 70 [bars] * with paper filtering unit - Tailstock option with counterspindle Iiedpfx Acjx H Atyjlef - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICKLOAD - Electric transformer - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Collet chuck

Condition: used, TECHNICAL DETAILS - Disc : 2x - Connection : 50 Hz 3x400 V - Machine weight : 3200 [kg] - Number of hours under power : 99 287 [h] - Wheel diameter : 700 [mm] - Wheel height : 200 [mm] - Max. height of the workpiece : 100 [mm] Isdpfx Acsw Ulnbelsif EQUIPMENT - Aspiration : 1 - Coolant tank : 1 - Hydraulic unit : 1 - Tooling : 1 - Retention plate : 1

Condition: good (used), Year of construction: 2003, functionality: fully functional, Offered is a Clipper Poly Clip PDC 700, year of manufacture 2003. The machine is in good condition, fully functional, and immediately ready for use. Includes thread dispenser and loop former (caliber 28 to 115 mm). Further information upon request. Payment in cash or advance payment. Sale only to commercial customers, no warranty or guarantee. Iiedoxh Hprspfx Acljf

Condition: ready for operation (used), Year of construction: 2015, Weinig Powermat 700 6x 40mm Spindles. CNC on spindles 3, 4 and 5. Width 20-230mm Height 10-160mm Memory system Automatic lubrication system for bedplates. No 1.  11kW - Bottom 7000rpm No 2. 7.5kW - Right 7000rpm Iiodpfx Acoztvhhjlof No 3. 7.5kW - Left 7000rpm No 4. 15kW - Top 7000rpm No 5 . 11kW - Top 7000rpm No 6 . 11kW - Bottom 7000rpm Electronically variable feed. 40m/min Short infeed table. Marathon coating for machine bed plates. Manuals & hand tools.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, For sale is a Felder F 700 table router in high-quality industrial design, including a Felder F38 3-roller feed system. The machine impresses with its robust construction, powerful drive, and precise adjustment options, making it ideal for professional use in carpentry and joinery workshops. Technical data: Manufacturer: Felder Type: F 700 Year of manufacture: 2012 Motor power: 7.35 kW Voltage: 400 volts Frequency: 50 Hz 3-phase design Router spindle adjustable by 45° Electronic height adjustment with digital display (mm/inch) Speed levels: 3,500 / 6,500 / 8,000 / 10,000 rpm Made in Austria Equipment: Felder 3-roller feed system F 38 Swivel and height-adjustable feed system Isdpfx Ajzm Rziecljif Sliding table Table extension Solid aluminum router fence Precise router fence adjustment Large cast iron table Digital display for router height Swivel indicator for the router spindle Emergency stop switch Professional industrial design The machine is in good used condition and shows only the usual signs of wear and tear due to age and use. It is ideally suited for daily professional use. An inspection and test run are possible at any time by appointment. Transportation is possible for an additional charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer - year of manufacture 1993 - log diameter max 1300 mm TECHNICAL PARAMETERS: Iiodpfx Ajt Hf T Hoclef minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, – Austrian production – X-Roll sliding carriage guide system – DTR and CE user manuals TECHNICAL SPECIFICATIONS: – Carriage length: 2050 mm – Cutting width (right): 1250 mm – Max. blade diameter: 315 mm – Scoring unit diameter: 100 mm – Main motor: 5.5 kW – Scoring unit motor: 0.75 kW – Brake – X-Roll guide system – Cutting height adjustment – Manual angle adjustment: 0° - 45° – Max. cutting height: 104 mm Iodpfeym Amlsx Aclsif – Possibility to install cutter: thickness: 6 - 20 mm – Max. diameter: 228 mm – Pawl – Blade guard – Extraction port diameter: 50 and 120 mm – Dimensions (L/W/H): 220 / 200 / 130 cm – Weight: ~ 550 kg

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Isdpfx Aeyilyqocleif Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: good (used), Code: 0459 Brand: SICMA - ITALY Model: F 700 N - CE Standard Iiedezn Agtjpfx Acljf Spindle moulder for milling and jointing operations on wood, plastics, composites and various other materials – CE Standard Table dimensions 1000 x 800 mm Rotational speed 3000/4500/6000/8000 rpm Max diameter 250 mm Mechanical spindle height indicator Motor 4,5 Hp Aluminium guides Safety guard N° 2 suction inlets diameter 120 mm Overall dimensions mm 1100 x 800 x 1100 h Weight kg 800

Condition: used, Year of construction: 2019, operating hours: 4,493 h, 2019 | Vögele Super 700-3 I | Used Asphalt Paver | 4493 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 55 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good operating and maintained Vogele paver , all functions operate and oil and filters recently been replaced , machine is ready to work 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41101 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Iiedpszmatzsfx Aclsf

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump Iiodpfxezldxrj Acljf oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). Isdpfx Ajzrl A Eecljif 2. Felder AF 14 mobile dust extraction unit (included): Model: Felder AF 14 (movable on rollers) Power: Powerful motor with robust steel fan wheel Airflow: Max. 2,350 m³/h for excellent chip extraction Convenience: Practical quick-change system for chip bags Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement.

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Iisdsx Ry Atepfx Aclef Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: used, Year of construction: 2021, Chamber dryer for recycled plastics. Manufacturer: Creative Machine Building Center Year of manufacture: 2021 Power supply: 400 V Power: 75 kW Capacity: 700 kg/h (soft plastics) 1000 kg/h (hard plastics) Iiedpfx Aoztzzgeclof External dimensions of the machine: - length: 4,000 mm - width: 1,500 mm - height: 2,600 mm Includes a belt conveyor. Technical condition: used

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-700-70 Year of production: 2010 Serial number: 214430 Control system: Arburg Selogica Direct Clamping force: 700 kN (70 tons) Iiedpfxjx Eirqo Aclof Screw diameter: 18 mm

Condition: like new (used), Year of construction: 2023, Weinig Powermat 700 6 spindle four-sided planer machine * Machine as new, 0 operating hours * 6x Weinig Powerlock with 8000 RPM Bottom - right - left - top - top - bottom Feed speed 5-40 m/min Infeed table 2 meters Axial and radial CNC adjustments for spindles 2, 3, and 5, 6 Ijdpfszk Hduox Acloif Radial CNC adjustment for spindle 4 Table surfaces with Marathon coating Automatic Waxilit pump Operating concept Comfort Set Powercom Plus

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, working width: 260 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 160 mm, spindle speed (min.): 7,000 rpm, Weinig Powermat 700 6 spindles 260 mm wide 160 mm high 40 mm spindles 7.000 rpm Feed speed 5-40 m/min Bottom 11.0 KW Right + left motor joint motor 11.0 KW Top 11.0 KW Iijdpszk Hdnefx Aclof Top 7.5 KW Bottom 7.5 KW Radial CNC controlled adjustment and positioning left + top spindles Marathon coating for machine tables and fences (excl. infeed table) 2.5 Meter infeed table Memory Plus operating system

Condition: excellent (used), functionality: fully functional, hopper 150x100 cm hydraulic pressure drawer Iiodpfx Acjyync Hjlsf year of manufacture 1996 control from operator panel sieve 1.5 cm CE marking