Used Mineral Wool for sale (386)

Condition: excellent (used), functionality: fully functional, tank capacity: 120,500 l, total height: 20,000 mm, inner diameter: 3,000 mm, outer diameter: 3,300 mm, wall material: stainless steel, wall structure: single-walled, number of chambers: 1, operating temperature: 20 °C, operating pressure: 3 bar, Stainless steel pressure vessel, vertical, insulated Technical data / Dimensions Available quantity: 8 Volume: approx. 120,000 liters Vessel type: Pressure vessel Condition: used Food-grade: yes Design: vertical Internal diameter: approx. 3,000 mm External diameter: approx. 3,300 mm Overall height: approx. 20,000 mm Specific gravity of the medium: 10.00 t/m³ Operating pressure: Overpressure Operating overpressure: 3.00 bar Wall thickness, bottom: approx. 6.0 mm Wall thickness, top: approx. 4.5 mm Wall thickness, shell / cylinder: approx. 3.5-5 mm Operating temperature: 20°C Material / Properties Material, inner shell: Stainless steel Material grade: V2A-1.4301 (AISI 304) External surface: Ground, welded seams passivated Welded seams, internally ground: Yes Insulation Insulation present Insulation thickness: approx. 120 mm Insulation material: Mineral wool Material, insulation jacket: Aluminum Insulation jacket: Trapezoidal sheet Rcjdpszvh Dtefx Afgeh Equipment Base type: Foot ring / base ring Quantity: 1 Mounting: fixed Bottom type, top: Dished end Bottom type, bottom: Dished end Top: 1 x Insulated dome DN 900 1 x Access opening with dome cover DN600 1 x Valve dome cover with the following connections: 1 x Cleaning-ventilation-valve combination (RLV) DN 50 1 x Vacuum valve, spring-loaded with 2 heating elements and thermostat 1 x Safety valve 1 x Burst disc 1 x Thread DN 50 for probe Shell: 1 x Condensate pipe DN 25 1 x Cable protection pipe DN 32 1 x CIP pipe DN 50 1 x Base ring made of Cr-Ni steel (1.4301) with access opening 600 x 600 1 x Spray pipe with protruding ball head Bottom: 1 x Outlet cup DN 300 1 x Outlet with cover cap, chain, and eyelet DN 80 1 x Connection fitting for sampling tap DN10 Documentation Drawing Inspection log Inspection certificate

Condition: new, Year of construction: 2026, - External dimensions: 8125x4650x4600 mm - Internal dimensions: 8000x4500x3800 mm - Entrance gate: 4000x3800 mm (four wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 22kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece Rjdsnbdlbepfx Afgjch - Ceiling lights: Coffers with LED fluorescent lamps 36pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: new, Year of construction: 2026, functionality: fully functional, power: 36 kW (48.95 HP), input voltage: 380 V, inner dimension length: 2,000 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, total length: 3,033 mm, total width: 1,802 mm, total height: 2,553 mm, overall weight: 750 kg, fuel type: electric, Equipment: CE marking, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately based on the delivery address. Please contact us for an individual transport quote. ✅ Made to order ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment Please also inquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Oven with Electric Heating – MATOVENB-151820 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Efficient ☘️ Professional Curing ✅ Electrically heated powder oven ✅ Compact design for small and medium-sized workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Programmable automatic exhaust fan function ✅ Audible signal at end of curing cycle ✅ Insulated door with specialized locking system ✅ Durable sandwich panel construction ✅ Excellent heat retention due to robust insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shut-off after process completion ✅ Compatible with mobile workpiece trolley ✅ Optional rack system for small series production ➖➖➖➖➖ ♨️ Also available with extension up to 500°C for high-temperature processes (optional) ➖➖➖➖➖ Technical specifications: ✔️ Model: MATOVENB-151820 ✔️ Internal and external dimensions: see technical drawing in the image gallery ✔️ Electric heating power: 36 kW ✔️ Fan capacity: 3,000 m³/h ✔️ Recirculation fan: 1.50 kW ✔️ Exhaust fan: 0.53 kW ✔️ Total power: approx. 38 kW ±10% ✔️ Digital temperature control ✔️ Infinitely variable temperature setting up to 220°C ✔️ Interior: 1.2 mm galvanized steel Rsdpfxsxpvbas Afgech ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm mineral wool + 100 mm glass fiber ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Signal tone after process completion ✔️ Control panel: 1 unit Further MATOVENB electric powder ovens available in various sizes. Dimensions and technical data for additional models can be found in the attached catalog. ➖➖➖➖➖ ⚙️ Optional control features ✅ PID control for precise temperature regulation ✅ Touchscreen control panel and smartphone operation ✅ Ramp-heating mode for defined temperature curves ✅ Storage of process parameters ✅ Weekly & monthly reports at the touch of a button ➖➖➖➖➖ ️ Safety and process monitoring Safety sensor to prevent overheating Automatic shutdown in the event of a fault Acoustic alerts in case of errors Smoke extraction via automatic venting system ➖➖➖➖➖ ♨️ Ramp Heating Mode (optional) Accurately control temperature profiles and holding times, for example: • Reach the target temperature within a specified time • Maintain the desired temperature for a set period • Controlled cooling down to the target temperature • Automatic notifications for process events ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer a range of financing options to ensure flexible investment planning. Contact us for information on leasing, hire purchase, or installment payment options. ➖➖➖➖➖ Custom dimensions or special configurations available on request. We are happy to plan a tailored solution for your workshop. Request your quote now – equip your business for professional powder coating!

Condition: ready for operation (used), functionality: fully functional, Buffer tank standing on 4 profile feet, insulated Tank specifications: Volume: approx. 50,000 liters Operating pressure: max. 4 bar Operating temperature: max. 90° C Diameter incl. insulation: approx. 3,600 mm Rodpfxjtwfxls Afgsch Cylindrical height: approx. 6,360 mm Total height with feet: approx. 8,700 mm Condition: fully overhauled Tank with dished (Klöpper) ends Wall thicknesses: Ends: 12 mm, Shell: 10.5 mm Tank equipment: • 1 manhole DN 600 with blank cover • 7 x 1/2'' coupling sockets for temperature sensors • 2 lifting lugs on the shell • 2 lifting lugs on the top end • 2 lifting lugs on the tank feet • 1 drain 2'' led laterally to the shell with ball valve, terminating in the manhole cover hood • 1 vent Ø33.7 x 3.6 mm, routed downwards on the side within the insulation and terminating in the manhole cover hood • 1 connection DN 125, flanged externally, inside terminating in a 90° elbow at the tank center • 1 connection DN 125, flanged externally, inside terminating in a 90° elbow at the tank center All existing but unneeded nozzles/connections will be professionally removed and sealed. Insulation: The tank is fitted with 220 mm thick insulation, consisting of 120 mm PU foam and 100 mm mineral wool. The insulation cladding is made of galvanized sheet steel (other materials available on request). Optional: • Vacuum breaker for pressure vessel • Verification of stability in accordance with current regulations

Condition: used, Spirax Sarco Clean Steam Generator Station – 700 kg/h – Year of Manufacture 2019 For sale is a steam-heated clean steam generator station from the manufacturer Spirax Sarco with a clean steam capacity of approximately 700 kg/h. The system consists of a horizontal clean steam generator with an integrated tube bundle heat exchanger, a condensate cooler for feedwater preheating, and a fresh water feed via a control valve. Technical Data Manufacturer: Spirax Sarco GmbH System Type: Clean Steam Generator Station Serial Number: 2019/955 Year of Manufacture: 2019 (according to serial number, to be confirmed) Clean Steam Capacity: approx. 700 kg/h Clean Steam Pressure: 0.8 bar(g) Heating Steam Quantity: approx. 770 kg/h Heating Steam Pressure: approx. 3.5 bar(g) Total Power Output according to Design Data: 531 kW Feedwater Inlet: 15 °C Minimum Feedwater Pressure: 2 bar(g) Feedwater Quality: according to EN 285 Clean Steam Generator Design: horizontal, with pull-out U-tube bundle Design Pressure, Tube Side: 10 bar Design Pressure, Shell Side: 3 bar Design Temperature: 200 °C each Diameter: approx. 711 mm Length: approx. 2,600 mm Height: approx. 1,400 mm Thermal Output: 452 kW Tube Bundle: Stainless steel 1.4571 Insulation: approx. 100 mm mineral wool with galvanized steel sheet cladding Condensate Cooler / Feedwater Preheating Type: Plate heat exchanger Type: Alfa Nova 27-10H Manufacturer: Alfa Laval Rodpfx Afjwgkyhjgjch Capacity: 61 kW Design Pressure: 25 bar Design Temperature: 225 °C Condensate Quantity: approx. 770 kg/h Feedwater Quantity: approx. 700 kg/h Equipment Control cabinet and control system Electropneumatic pressure control valve Safety and shut-off valves Condensate trap and drain group Pressure sensors and manometers Level control with low water alarm Piping and connecting fittings Base frame with support saddles The system was designed and manufactured in accordance with the European Pressure Equipment Directive applicable at the time of manufacture. Further technical documentation is available upon request. Inspection possible by appointment.

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Rjdpow Dy D Djfx Afgsch Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric - Upright design on four tubular legs with forklift channels - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Equipment: 1x Top traverse with two hinged cover halves, clamp function for the lid Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: new, Year of construction: 2025, Boiling Kettle, designed for thermal tratment o different types of meat products. - Double jacket- oil - Electronic control ADITEC with temperature control in the oil double jacket and heart temperature sensor - Delayed start by time - Open system - Operating temperature up to 140 °C - Thermal insulation with mineral wool Rsdpfx Afewqb Ukogech - Cylindrical work environment or as per customer choice - Stainless steel AISI 304

Year of construction: 2008, condition: as good as new (ex-display), 3 units, rectangular, insulated steel tanks mounted on double T-rails, with cooling/heating capabilities, manufactured in 2008 – used – (formerly palm oil storage tanks) Capacity approx. 45,400 liters Length approx. 12,000 mm Width approx. 2,400 mm Height approx. 2,900 mm On the tank roof: 1 manhole DN 600 1 socket 2“ 1 socket 3“ 1 outlet flange DN 160 Rcjdjd Tmcvjpfx Afgoh 1 socket ½“ Inlet and outlet for heating coil 2“ At the end face: 1 filling pipe DN 80 Insulation: 80 mm mineral wool Otherwise, see drawing + photos.

Condition: used, Vertical insulated tank 100m³ Diameter 3.85m Height 11 m The tank is insulated with mineral wool It is lined with trapezoidal sheet metal It has space for a side agitator The tanks are dismantled, ready for loading. Rcsdpjxl Th Nofx Afgjh

Condition: used, TIRA Climate simulation chamber / walk-in climate test chamber TIRA TCZ 4022 S -2K Air-cooled | -40 to +140 °C | Refrigerant R449A For sale is a used, walk-in climate simulation chamber from the manufacturer TIRA. The system consists of an insulated test chamber, an air handling unit, external humidification, a machine unit and a control cabinet. It is used for temperature and humidity testing. Redpfx Asz Sn Uvofgjch Technical data: Manufacturer: TIRA Type: TCZ 4022 S -2K Cooling type: air-cooled Temperature range: -40 to +140 °C Temperature stability, supply air: over time ≤ ±0.5 °C; spatially ≤ ±1.0 °C Heating / Cooling: approx. 2 K/min each (-30 to +85 °C, without test item and thermal load) Climate range: +10 to +90 °C Humidity: 10 to approx. 95 % RH Dew point: +5 to +89 °C Humidity stability, supply air: over time ≤ ±2.5 % RH With heat compensation up to 16 kW: +15 to +80 °C; 15 to approx. 80 % RH Dew point: +10 to +74 °C Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm External dimensions: approx. 2660 x 6460 x 2800 mm Door opening (W x H): 2260 x 2260 mm Climate module KB 127: 1700 x 800 x 1400 mm Control cabinet: 800 x 500 x 2000 mm Power connection: 400 V, 3/PE/N, 50 Hz Rated power: 95 kW; Rated current: 150 A Fuse rating: 200 A, slow-blow Total weight according to specifications: approx. 5834 kg Equipment: Stainless steel interior and floor Double-wing door with viewing window approx. 1000 x 1000 mm Supply air at the top / exhaust air at the bottom on the rear wall Electric heating, direct cooling and dehumidification Bitzer 6G-30.2Y; Refrigerant R449A; Oil SEZ 32 Steam humidifier EDB 40 4 test chamber spotlights à 500 W Insulation: 80 mm PUR and 120 mm mineral wool Floor load: 15,000 N/m²; Wheel load: 1,500 N/wheel (≥ 4 cm²) Application areas: Temperature and climate testing Environmental simulation Material and component testing Quality assurance and development Condition: Used Optical condition according to pictures Scope of delivery: TIRA TCZ 4022 S -2K with associated components as shown in the pictures Items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), functionality: fully functional, Year of manufacture: approx. 2014 Greenline version – Energy-saving (IE2) Conveying medium temperature up to +120°C Multi-purpose use, e.g. for kitchen exhaust or industrial exhaust Double-walled, sound-insulated housing (50 mm rock wool – non-combustible, DIN 4102) Inspection door facilitates maintenance work Voltage/Frequency: 400 V / 3 phase / 50 Hz Power: 3670 Watt Current: 6.16 Amps Speed: 2890 rpm Protection class: IP 55 Motor protection: PTC (thermistor) Max. medium temperature: +120°C Motor type efficiency/controllable: IE2 / frequency inverter controllable (Greenline) Max. air volume flow: 7513 m³/h Motor outside airflow as per DIN 18869-T1: yes Sound pressure level at 4m: 53 dB(A) Housing insulation: Double-walled with 50 mm mineral wool (non-combustible) Housing material: Galvanized sheet steel External dimensions: 770 x 770 x 655 mm (L x W x H) Inlet duct connection (DN): 355 mm Outlet duct connection (DN): 355 mm Rjdpfex H Ryhox Afgech Weight: 95 kg

Condition: new, functionality: fully functional, power: 120 kW (163.15 HP), input voltage: 380 V, inner dimension length: 7,200 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, total length: 8,233 mm, total width: 1,800 mm, total height: 2,553 mm, overall weight: 3,000 kg, control type: NC control, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately based on delivery address. Please contact us for an individual transport quote. ✅ Made to order ✅ Brand new, unused professional industrial unit ✅ Proton Maschinenbau GmbH is the exclusive authorised European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also enquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Oven with Electric Heating – MATOVENB-151872 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Efficient ☘️ Powerful ☘️ Professional Curing ✅ Electrically heated powder oven ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and cure time ✅ Adjustable automatic exhaust fan function ✅ Audible signal at end of cure cycle ✅ Insulated door with special locking system ✅ Robust sandwich panel construction with high-performance insulation ✅ Timer function from 10 minutes up to 24 hours ✅ Automatic shutdown at end of process ✅ Compatible with mobile part carriage ✅ Optional insert shelving system for small batch production ♨️ Also available (optional) as a high-temperature version up to 500°C. ⚡ Depending on model/project, also available with electric, gas or diesel heating. ➖➖➖➖➖ Technical Specifications: ✔️ Model: MATOVENB-151872 ✔️ Internal / external dimensions: see technical drawing in photo gallery ✔️ Electric heating power: 120 kW ✔️ Blower capacity: 2 x 4,500 m³/h = 9,000 m³/h ✔️ Recirculation fan: 2 x 3.00 kW ✔️ Exhaust fan: 0.75 kW ✔️ Total power consumption: approx. 128 kW ±10% ✔️ Digital heat control ✔️ Continuously adjustable temperature up to 220°C ✔️ Interior: 1.2 mm galvanised steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm mineral wool + 100 mm glass fibre ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Audible signal after process completion ✔️ Control panel: 1 pc More MATOVENB powder ovens in various sizes available. Dimensions and technical data of other models can be found in the attached catalogue. ➖➖➖➖➖ ⚙️ Optional Control Functions ✅ PID control for precise temperature management ✅ Touchscreen control panel and smartphone operation ✅ Ramp-heating mode for defined temperature profiles ✅ Process parameter memory ✅ Weekly & monthly reporting at the touch of a button ➖➖➖➖➖ 🛡️ Safety and Process Control Safety sensors to prevent overheating Automatic shutdown in case of malfunction Acoustic warning signals in case of faults Smoke extraction via automatic venting ➖➖➖➖➖ ♨️ Ramp-Heating Mode (optional) Precisely control temperature profiles and holding times: • Reach target temperature in a defined time • Maintain the desired setpoint time • Controlled cooldown to target temperature • Automatic notifications for process events ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models. Please contact us for leasing, hire-purchase or instalment payment options. ➖➖➖➖➖ Special sizes or customised designs available on request. We are happy to plan a suitable solution for your workshop. Get in touch now – prepare your business for professional powder coating! Rcedpfxsy Ny Tpo Afgsh

Condition: used, functionality: fully functional, tank capacity: 30,000 l, total height: 7,200 mm, inner diameter: 2,500 mm, outer diameter: 2,900 mm, overall weight: 6,000 kg, wall thickness: 10 mm, wall structure: single-walled, number of chambers: 1, manhole diameter: 600 mm, pressure (max.): 3 bar, Buffer Storage Tank – 30,000 L, Vertical, Insulated Volume: 30,000 liters Internal diameter: approx. 2,500 mm External diameter (with insulation): approx. 2,900 mm Cylindrical height: approx. 5,520 mm Overall height: approx. 7,200 mm Empty weight: 6,000 kg Operating pressure: +3.00 bar Operating temperature: -10 / +900 °C Medium: Water Density: 1,000 kg/m³ Bottom wall thickness: approx. 11 mm Shell/cylinder wall thickness: approx. 10 mm Material / Characteristics Shell material: P265GH / S235JR Insulation: 200 mm mineral wool Cladding: smooth aluminium sheet (weatherproof) Mineral wool will be newly installed, i.e., insulation thickness can be chosen freely. Equipment Mounting: Feet Number: 4 Attachment: fixed Top/base type: dished end (Klöpper head) Bottom/base type: dished end (Klöpper head) Connections: - 1 manhole DN 600 with blind cover - 7x 1/2'' sockets for temperature sensors - 2 lifting lugs on the shell - 2 lifting lugs on the top head - 2 lifting lugs at the tank feet - 1 drain 2'' at the tank bottom, routed to the outside and terminating in a 2'' ball valve - 1 vent Ø33.7 x 3.6 mm, routed downwards laterally within the insulation and ending in the manhole cover enclosure - 1 connection DN 125, flanged externally, ending internally in a 90° bend in the tank center - 1 connection DN 125, flanged externally, ending internally in a 90° bend in the tank center Documentation: Rcjdpsxdknksfx Afgjh Drawing

Condition: used, overall weight: 39,000 kg, first registration: 06/2026, loading space volume: 35 m³, total width: 2,438 mm, total height: 2,670 mm, Year of construction: 2025, !!! NEW !!! WITHOUT PRE-CARRIAGE !!! Type: CIMC Longitudinal Swap Body Tank (CLS) Capacity: 35,000 liters Tare weight: 4,130 kg Operating pressure (max.): 3.0 bar Test pressure: 4.5 bar Temperature range: -40°C to +130°C Approvals: IMO Type 4, RID/ADR-L4BH, UIC, TIR, CSC Shell: 1.4402 (316L), 3.2 mm, 2B finish Redpfx Asy Ebacefgjch Ends: 1.4402 (316L), 4.2 mm, hot-rolled, polished Baffles: 4× vertical, CVC-shaped, corrugated, 70% welded Internal finish: Degreased, pickled, passivated, neutralized Ladder: Stainless steel, right rear, theft-proof Catwalk: Aluminium, anti-slip, 475 mm, with cross-steps Handrail: Folding, telescopic, theft-proof Stacking: Up to 3 units Manhole: Ø500 mm, 316 stainless steel, 8-bolt, EPDM/PTFE Revision openings: 3× Ø300 mm, 316 stainless steel, 4-bolt Safety valve: 3", stainless steel, 3.75 bar, without flame arrester, with rupture disc & pressure gauge Air line: 1.5", with ball, safety & non-return valve, gauge accessible from below Vacuum valve: 2" BSP, -0.21 bar Bottom valve: 3", with remote cable closure Steam heating: 8 longitudinal runs, 1" BSP, 3 bar Thermometer: Analog, -40°C to +160°C Insulation: o 50 mm mineral wool (tank & ends) o PU foam under stainless steel straps Cladding: o Shell: 4× 1.8 mm GRP panels Markings: 3× holders for Edgar Weber flip boards, 1× Kemmler mounting bracket Interim sale and errors excepted! Sale exclusively according to our Terms and Conditions. Important notice – Important information: Despite careful review of all details in our offer, errors may occur. Some may be due to transmission errors in the systems of various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute any legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information to initiate contractual negotiations. The information provided here is without guarantee and does not represent warranted characteristics.

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 23 ft, color: grey, overall weight: 1,500 kg, maximum load weight: 1,500 kg, empty load weight: 1,500 kg, loading space volume: 38 m³, loading space width: 4,800 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Bürocontainer Modell ANLAGE, Office Container | Residential Container | Construction Site Container | Model ANLAGE | 480 × 600 cm | High-quality & Flexible Solution Our immediately available containers can be viewed and collected directly from our warehouse. Our office and residential containers offer an excellent solution for a wide range of applications, impressing with outstanding quality, high flexibility, and short delivery times. Technical Details Dimensions: • Width: 480 cm • Length: 600 cm • Height: 250 cm Insulation • Ceiling/Walls: 50 mm PUR (polyurethane) • Optional: 100 mm insulation (PUR, PIR or mineral wool) available Rcsdsxcgx Aopfx Afgoh • Floor: 16 mm fibre cement board + PVC covering High-quality workmanship for long-term use Features & Quality • 1x Room • 1x Exterior door • 5x Windows with roller shutters • Premium window and glazing systems from REHAU for optimal thermal insulation and durability Colours • Façade colour: RAL 9002 • Frame colour: RAL 7040 • Customisation according to customer requirements possible Stock & Delivery • Stock items: Same-day dispatch possible • Non-stock items: Production time depending on model approximately 2–4 weeks • Worldwide shipping: Reliable and professional delivery to all countries • Custom dimensions: Manufactured according to customer-specific requirements 📍 Showroom address: Im Mannenberg 9a, 53557 Bad Hönningen For further information or tailored solutions, please feel free to contact us!

Condition: new, power: 18 kW (24.47 HP), input voltage: 380 V, inner dimension length: 1,000 mm, inner dimension width: 1,000 mm, inner dimension height: 1,600 mm, total length: 1,376 mm, total width: 1,702 mm, total height: 2,593 mm, overall weight: 500 kg, fuel type: electric, Equipment: CE marking, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately based on the delivery address. Please contact us for a personalized transport quote. ✅ Manufactured to order ✅ Brand-new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the exclusive authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment Please also enquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Oven with Electric Heating – MATOVENB-101610 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Efficient ☘️ Professional Curing Rcjdpfx Afswd Nwaegeh ✅ Electrically heated powder oven ✅ Compact design for small and medium-sized workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Programmable exhaust fan function ✅ End-of-process acoustic signal ✅ Insulated door with special locking system ✅ Robust sandwich panel construction ✅ Excellent heat retention due to high-quality insulation ✅ Timer function from 10 minutes up to 24 hours ✅ Automatic shutoff after process completion ✅ Usable with mobile workpiece trolley ✅ Optional shelf system available for small batch production ➖➖➖➖➖ ♨️ Also available with extension up to 500°C for high-temperature processes (optional) ➖➖➖➖➖ Technical Specifications: ✔️ Model: MATOVENB-101610 ✔️ Internal and external dimensions: see technical drawing in image gallery ✔️ Electric heating capacity: 18 kW ✔️ Blower capacity: 1,500 m³/h ✔️ Circulation fan: 0.75 kW ✔️ Exhaust fan: 0.53 kW ✔️ Total power: approx. 19.5 kW ±10% ✔️ Digital temperature regulation ✔️ Stepless temperature adjustment up to 220°C ✔️ Interior: 1.2 mm galvanized steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm mineral wool + 100 mm fiberglass ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ End-of-process acoustic alarm ✔️ Control panel: 1 pc ➖➖➖➖➖ ⚙️ Optional Control Features ✅ PID controller for precise temperature regulation ✅ Touchscreen operator panel and smartphone control ✅ Ramp heating mode for defined temperature profiles ✅ Storage of process parameters ✅ Weekly & monthly reports at the push of a button ➖➖➖➖➖ ️ Safety and Process Monitoring • Safety sensor to prevent overheating • Automatic shutdown in case of malfunction • Audible error warning signals • Automatic ventilation for smoke extraction ➖➖➖➖➖ ♨️ Ramp Heating Mode (optional) Precisely control temperature progression and holding times, e.g.: • Reach target temperature in a defined timeframe • Hold at target temperature for a specified period • Controlled cool-down to target temperature • Automatic notifications for process events ➖➖➖➖➖ ✳️ No need to repeat settings! The oven stores your process parameters – batch after batch. This saves time and prevents errors. ➖➖➖➖➖ ✳️ Secure your liquidity! We offer several financing options to help you plan your investment flexibly. Contact us for details on leasing, hire-purchase, or installment payment solutions. ➖➖➖➖➖ Custom sizes and bespoke configurations available upon request. We are happy to plan a customized solution for your workshop. Enquire now – get your business ready for professional powder coating! ➖➖➖➖➖

Condition: like new (used), Year of construction: 2024, operating hours: 490 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, COMPLETE MINERAL MASTERBATCH PRODUCTION LINE – PELLETIZING PROCESS High-concentration mineral masterbatch • Turnkey industrial installation • Spain ASKING PRICE: XX.XXX + VAT | COMPLETE LINE ONLY A complete production solution Complete industrial installation designed for the production of highly concentrated mineral masterbatch. The line integrates raw material handling, weighing/dosing, high-speed mixing, conveying, pelletizing, screening, and bagging into a single, coordinated system. The equipment is offered as one complete lot, dismantled and available for relocation. Capacity Rjdpfx Afjz Aibaegech Approx. 750–850 kg/h* Operating hours Maximum 490 h Mixer 500 L / 300 L usable / 75 kW Pelletizer 350 mm / 37 kW Automation Siemens S7-1200 PLC Power supply Includes 200 kVA Perkins generator Integrated process RAW MATERIAL FEEDING → AUTOMATIC WEIGHING/DOSING → HIGH-SPEED MIXING → TRANSFER → PELLETIZING → SCREENING → BAGGING Why this line is attractive • Complete and integrated: avoids the engineering and integration work involved in sourcing the equipment individually. • Very low operating hours: maximum recorded operating time is 490 h. • Industrial-scale mixing: 500 L mixer with 75 kW drive and variable-speed control. • Automated dosing and control: Siemens S7-1200 PLC architecture with weighing and recipe-management functions. • Relocatable asset: installation is offered dismantled, making it suitable for transfer to another industrial site. *Capacity is an approximate figure based on the installation configuration and intended application; actual throughput depends on formulation, operating conditions, and product specification.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,600 kg, loading space width: 3,000 mm, loading space length: 7,000 mm, loading space height: 2,500 mm, machine/vehicle number: Modell Cappuccino, Sun Container GmbH | Office Container | Living Container | Construction Container | Model Cappuccino | 300 cm x 700 cm | High-Quality and Flexible Solution Available products can be viewed at our warehouse and collected directly. Our office and living containers offer an excellent solution for a wide range of applications. They stand out for their outstanding quality, maximum flexibility and short delivery times. Technical Details Dimensions: Length: 300 cm Width: 700 cm Height: 280 cm Interior height: 220 cm Weight: 2,350 kg Insulation and Construction: Premium façade cladding made of wood-plastic composite (WPC) in a two-tone design Ceiling/Walls: 5 cm PUR (polyurethane) insulation Particularly robust and specially designed floor chassis 2 mm thick galvanized steel sheet Mineral wool insulation between the glass panes Optional: 10 cm insulation available in PUR, PIR or mineral wool Floor: 16 mm fibre cement board PVC flooring Features and Equipment Rcodpfx Aj Agn Aiofgjh 1x room 2x floor-to-ceiling fixed windows 1x glass door 1x three-section clerestory window 1x premium façade cladding made of wood-plastic composite (WPC) in a two-tone design Colours RAL 7016 (Anthracite Grey) with premium two-tone wood-plastic composite (WPC) façade cladding High-quality workmanship ensures long-lasting use. Stock Availability and Delivery In stock: Dispatch on the same day Out of stock: Production time of 2 to 4 weeks, depending on the model Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. Custom dimensions: Products can be manufactured according to the customer's specific requirements. Showroom Address Am Schafhaus 28 53557 Bad Hönningen Germany For further information or customised modifications, please do not hesitate to contact us. We will be happy to assist you!

Condition: new, machine/vehicle number: 10463, The AR series are slow-running machines. They are available with 2, 4, 6, or 8 screw shafts. Each screw unit is installed independently and separately in the chassis. Screw shredders are designed for the shredding of brittle materials (wood, paper, gypsum, mineral wool, etc.). The machines are largely insensitive to contaminants such as glass, metal parts, stones, etc. Rodpfx Afoyr Ti Isgsch The AR series is optimally suited for use as a bale opener, e.g., for PET bottle bales.

Condition: used, Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 9 kW (12.24 HP), We offer for sale a used LINKS S.r.l. automatic zig-zag cotton wool production and packing line, manufactured in Italy in 2011. Rsdpfx Afezxnyysgoch Manufacturer: LINKS S.r.l., Italy Year of manufacture: 2011 Line configuration: Z/AP + ASA + L/CC Serial numbers: 300–301 The line is designed for the automatic production, zig-zag forming and packing of absorbent cotton wool in polyethylene bags. Technical specifications: Capacity: up to 25 packs/min at 100 g (approx. 1,500 packs/hour) Electrical power: 9 kW Power supply: 380 V / 50 Hz / 3-phase Operation: fully automatic cycle Operators required: 1 Packing/product formats: 50 g, 100 g and 200 g Equipment includes sets of forming/packing chambers for 50/100 g and 200 g Original technical documentation included The line consists of the Z/AP + ASA + L/CC units, covering the zig-zag forming, conveying and pressing stages and automatic packing process. Suitable for production of absorbent cotton wool, medical cotton wool and cosmetic cotton wool. The equipment is sold as used machinery. Further technical information, photographs and original documentation are available upon request. Please contact us for additional information, inspection arrangements or further photographs.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 20 ft, color: other, overall weight: 1,400 kg, empty load weight: 1,300 kg, loading space width: 2,438 mm, loading space length: 6,058 mm, loading space height: 285 mm, Equipment: cooling unit, Office Container / Residential Container / Welfare Container Price: €6,900 Description: OMEGA CONTAINERS has been active on the market since January 2017. We specialize in the comprehensive production of office, welfare, residential, and technical containers. We provide professional service from planning and production to transport and installation. OMEGA containers are constructed with a robust steel frame, which allows modules to be transported frequently or moved by crane without risk of damage. Our container’s standard dimensions: Length: 6058 mm Width: 2438 mm External height: 2850 mm Internal height: 2500 mm We also manufacture custom containers tailored perfectly to client requirements. Steel Construction Manufactured from 3 mm thick open steel profiles reinforced with 5 mm thick steel plates. The surface is coated with epoxy primer and finished with polyurethane paint. Color selection in line with RAL color charts. Roof: Rcodoy Hkw Tjpfx Afgsh Steel construction filled with sandwich panels with a 100 mm thick polystyrene or PUR foam core. The roof is fully sealed with 1 mm thick galvanized sheet metal. Walls: Made from sandwich panels with a 100 mm polystyrene core or PUR foam. The exterior cladding is sheet metal in silver, white, or graphite. The interior finish is white sheet metal. Flooring: Made from tightly welded steel profiles. Moisture barrier: trapezoidal sheet T-14. 100 mm mineral wool insulation. 25 mm OSB board. Finished with an industrial PVC covering with increased abrasion resistance and cover trim. Fittings: - Hinged door 900 mm x 2000 mm, white or anthracite - Turn/tilt window 1200 mm x 1200 mm - External roller shutter Electrical installation: 1x Distribution box – RCD + fuses; Earth leakage circuit breaker + fuses 1x 32A 5P power connection 1x External plug 32A 5P 2x LED lamps (2x36W) 3x Double power outlets 1x Electric heater 2kW Additional options: - Optionally equipped with toilet, shower, washbasin, incl. water connection, heating, etc. - Multiple windows of various sizes - Installation of glass doors - Installation of roller shutters - Installation of air-conditioning with heating function - Partition walls for room separation - Connecting multiple containers to form one unit We offer WhatsApp service—Omega Container is happy to answer any questions you may have! We look forward to your inquiry! Mobile DE-

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 7.2 ft, color: white, overall weight: 600 kg, maximum load weight: 600 kg, empty load weight: 600 kg, loading space volume: 6.6 m³, loading space width: 1,200 mm, loading space length: 2,200 mm, loading space height: 2,500 mm, machine/vehicle number: Sanitärcontainer DUSCHE-DUSCHE, Equipment: bathroom, shower, Sanitary container | Shower container | Double toilet container | 120cm x 220cm | Model DUSCHE-DUSCHE | High-quality and flexible solution Available products can be viewed in our warehouse and picked up directly. Our office and living containers offer an excellent solution for a wide range of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Technical details: Dimensions: Rcodpovwbqtsfx Afgeh • Length: 220 cm • Width: 120 cm • Height: 250 cm • Weight: 600 kg Insulation: • Ceiling/Wall: 5 cm PUR (polyurethane) • Optional: 10 cm insulation with PUR, PIR, or mineral wool available • Floor: 16 mm fiber cement board • PVC flooring Equipment: • 2 rooms • 2 exterior doors • 2 showers • 2 ventilation systems Colors: • Facade color: RAL 9002 • Frame color: RAL 9002 • Customization: Individual design possible according to customer requirements High-quality workmanship for long-term use Stock and delivery: • In stock: Same-day shipping • Not in stock: Production time per model, 2 to 4 weeks • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. • Custom dimensions: Products can be manufactured according to the specific requirements of the customer. Showroom address: Am Schafhaus 28, 53557 Bad Hönningen Germany We are happy to provide further information or tailor-made solutions!

Condition: like new (used), functionality: fully functional, overall weight: 75 kg, empty load weight: 75 kg, maximum load weight: 300 kg, Year of construction: 2025, operating hours: 30 h, Vacuum Lifter for sandwich roof Crane-Attached Lifters: Designed to be used with cranes or other lifting equipment for handling extremely large or heavy panels. A sandwich panel lifter is a specialized lifting device designed to handle and transport sandwich panels, which are widely used in the construction industry for walls, roofs, and facades. Sandwich panels consist of two outer layers (typically metal) and an insu-lating core (such as polyurethane, polystyrene, or mineral wool). These panels are lightweight yet large in size, making them dif-ficult to handle manually. Sandwich panel lifters are essential for ensuring safe, efficient, and precise installation. Key Features of a Sandwich Panel Lifter: Rcedpfxo Abbavs Afgsh 1. Vacuum Technology: - The lifter uses vacuum pads to securely grip the smooth surfaces of sandwich panels without causing damage. - The vacuum system is powered by an electric or pneumatic pump, ensuring a strong and reliable hold. 2. Tilting: - Lifters come with tilting mechanisms, allowing panels to be positioned horizontally or vertically as needed during installation. 3. Lightweight and Portable: - Sandwich panel lifters are designed to be lightweight and easy to transport, making them ideal for use on construction sites. 4. Safety Features: - Equipped with safety mechanisms such as vacuum pressure sensors and alarms to ensure the panels are securely held during lifting.

Condition: ready for operation (used), A combined sanitary container unit, consisting of two containers, presumably of the Czech make Moravia Containers or Containex, is available. Container exterior dimensions X/Y/Z: approx. 6060mm/2440mm/2840mm, interior height: 2500mm, protective primer: epoxy, insulation: mineral wool, floor traffic load: 2500N/m², exterior sheet metal thickness: 0.5mm, corrugation depth: 10mm, urinal: 6, cubicles: 6, washbasins: 5, electric heating convectors: 2, under-sink units: 5. The unit is designed for simple and quick disassembly and reassembly. The two containers must be separated during transport. Documentation available. An on-site inspection is possible. Rcsdpfx Afjzcp Uuegeh

Condition: new, Year of construction: 2025, container length: 3.6 ft, color: white, overall weight: 600 kg, maximum load weight: 600 kg, empty load weight: 600 kg, loading space volume: 3.4 m³, loading space width: 1,100 mm, loading space length: 1,200 mm, loading space height: 2,600 mm, machine/vehicle number: Sanitärcontainer WC, Equipment: bathroom, Sanitary container | WC container | Shower container | Toilet container | Double WC container | 110cm x 120cm | Model WC | High-quality and flexible solution Available products can be inspected at our warehouse and picked up directly. Our office and living containers offer an excellent solution for a variety of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Technical details: Dimensions: • Length: 120 cm Rcedpsvxht Rofx Afgjh • Width: 110 cm • Height: 260 cm • Weight: 400 kg Insulation: • Ceiling/wall: 6 cm PUR (polyurethane) • Optional: 10 cm insulation with PUR, PIR, or mineral wool available • Floor: 16 mm fiber cement board • PVC flooring Equipment: • 1 room • 1 exterior door • 1 WC with sink • 1 ventilation system Colors: • Facade color: RAL 9002 • Frame color: RAL 9002 • Customization: Individual design possible according to customer requirements High-quality workmanship for long-term use Stock and delivery: • In-stock items: Shipped on the same day • Not in stock: Production time depending on the model, 2 to 4 weeks • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. • Custom sizes: Products can be manufactured according to the specific requirements of the customer. Showroom address: Am Schafhaus 28, 53557 Bad Hönningen Germany We are happy to assist you with further information or customized solutions!