Used Mineral Wool for sale (385)

Condition: used, Sat B2599A Drawer Oven 1000T 130 °C Industrial Oven, Drying Oven If very different products or product parts with equally different processing times are to be treated independently of each other in the smallest possible space, drawer ovens are the most sensible and ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the oven Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in each drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, in a stabilized state: +/- 3 °C at 80 °C Frame: The basic structure consists of an unalloyed steel frame, on which the outer cladding made of unalloyed steel is mounted, painted in RAL 1013 (pearl white). The oven inner casing is made of aluminized sheet steel. The insulation between the two oven casings (inner/outer casing) is ensured by 120 mm of mineral wool. Floor: As with the oven walls, with 120 mm thick thermal insulation. Height (from factory floor to the first drawer): 800 mm +/- 100 mm, adjustable via the oven feet. Openings: 3 drawers, height 250 mm, for a usable loading height of 120 mm. Maintenance doors: 2-wing maintenance door on the rear of the oven. Secured with screws. This door enables complete access to the inside of the oven. Handling of the parts: The handling of the parts is ensured via 3 drawers (stacked on top of each other). Height between each drawer: 250 mm Usable height per drawer: 170 mm, with almost 10 mm of clearance. The drawers are smooth and equipped with a closing piece on the drawer bottom to reduce heat loss when opening. Each drawer has a usable load capacity of 120 kg with load distribution over the entire area. Load peaks of up to 240 kg can be supported. The drawer seals are made of silicone. The locking mechanisms for each drawer are secured via electromagnets and controlled by the Siemens system. Time control of the minimum preheating time with a timer per drawer (located in the control cabinet). Time control of the maximum preheating time with a timer per drawer (located in the control cabinet). A temperature display is provided for each drawer. These displays will be arranged on the front of the oven, to the left of the drawers. Ventilation: Number of circulation fans: 1 Circulation rate: 4,400 m³/h at 1450 rpm Motor power: 1.5 kW Bledpfxeim Ik So Anpjp Rated voltage: 400 V Rated current: 42 A Power: 24 kW You can find more industrial ovens in other sizes - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, tank capacity: 77,390 l, inner diameter: 3,000 mm, outer diameter: 3,400 mm, overall weight: 20,760 kg, manhole location: side, operating temperature: 100 °C, 1 compressed air tank. Manufacturer: Walter Krämer Fürstenwalde Diameter of tank without insulation: 3000 mm Diameter with insulation: approx. 3400 mm Overall height with feet and nozzle: approx. 12500 mm Capacity: 77390 liters Operating pressure max.: 20 bar Test pressure, water pressure test: 26 bar Empty weight: 20760 kg Tank steel material: P355 NH-W1 Manhole: 600 mm with hinged cover Year of manufacture: 1997 Insulation: Mineral wool Includes tank documentation and TÜV (German technical inspection association) documents. The last TÜV inspection with water pressure test was carried out in 2018. Result: minor rust particles on the bottom, continued operation is guaranteed. Bledpfx Aezvxu Njnpsp

Condition: used, Grinbold-Jodag Container System – 12 Modules with Interior Staircase For sale is an extensive, modular container system from the manufacturer Grinbold-Jodag, consisting of a total of 12 room modules with an interior staircase. The container system was designed as a multi-part, flexibly usable space system and is particularly suitable as an office, administrative, accommodation, or construction site facility. Due to the modular design, the individual containers can be connected and combined to form larger spatial units. Technical data Manufacturer: Grinbold-Jodag GmbH Type: Container “VARIANT” Year of offer: 2020 Number of containers: 12 units 8 containers: approx. 6,055 × 3,000 × 2,820 mm (L × W × H) 4 containers: approx. 6,055 × 2,435 × 2,820 mm (L × W × H) Interior height: approx. 2,500 mm Total modular floor area: approx. 204.3 m² Construction: Steel frame construction Color scheme: RAL 3000 Fire Red, steel components partially RAL 7024 Graphite Grey Floor covering: PVC flooring, Dark Grey 1040 Equipment and design Container construction and insulation Stable steel frame construction Roof insulation with mineral wool, depending on the design, 80 or 120 mm Blodpfx Ane Ahn N Hepjp Additional floor insulation with 100 mm mineral fiber Wall insulation with 100 mm PU insulation Interior wall coverings in white PVC flooring for commercial and industrial use Coupling and sealing material for connecting the containers Windows and doors Several plastic windows with insulated glazing Tilt-and-turn windows with roller shutters Additional toilet windows Aluminum sliding windows Steel exterior door with profile cylinder Several interior doors with steel frames Different door and window arrangements according to the original plan Interior staircase Steel interior staircase with intermediate landing Steel substructure in RAL 7024 Graphite Grey Beechwood steps Slip-resistant tread edge Handrail height approx. 1,000 mm Staircase width approx. 1,250 mm According to the original offer, designed for a permissible load of 100 people in the catchment area Electrical installation Pre-installed electrical equipment of the containers Central connection area RCD and circuit breakers 230-V sockets Partially splash-proof sockets (IP44) Switch and socket combinations LED surface-mounted luminaires Damp-proof luminaires Potential equalization between the container modules Prepared cable bushings and connection systems Possible applications The container system is suitable for, among other things: Office and administrative buildings Construction site offices and project locations Accommodation and social rooms Temporary operational buildings Training and meeting rooms Expansion of existing operating areas Condition and terms of sale The system is offered in its existing condition. The above equipment is based on the original manufacturer's offer from 2020. The actual scope of supply as well as the current condition and completeness must be checked during an inspection. Dismantling, loading and transport will be carried out after a separate agreement. An inspection is possible after prior arrangement. Subject to prior sale, changes and errors!

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 23 ft, color: grey, overall weight: 1,500 kg, maximum load weight: 1,500 kg, empty load weight: 1,500 kg, loading space volume: 38 m³, loading space width: 4,800 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Bürocontainer Modell ANLAGE, Office Container | Residential Container | Construction Site Container | Model ANLAGE | 480 × 600 cm | High-quality & Flexible Solution Our immediately available containers can be viewed and collected directly from our warehouse. Our office and residential containers offer an excellent solution for a wide range of applications, impressing with outstanding quality, high flexibility, and short delivery times. Technical Details Dimensions: • Width: 480 cm • Length: 600 cm • Height: 250 cm Insulation • Ceiling/Walls: 50 mm PUR (polyurethane) • Optional: 100 mm insulation (PUR, PIR or mineral wool) available • Floor: 16 mm fibre cement board + PVC covering High-quality workmanship for long-term use Features & Quality • 1x Room • 1x Exterior door • 5x Windows with roller shutters • Premium window and glazing systems from REHAU for optimal thermal insulation and durability Colours • Façade colour: RAL 9002 • Frame colour: RAL 7040 • Customisation according to customer requirements possible Bjdpfx Aexcgx Aonpjlp Stock & Delivery • Stock items: Same-day dispatch possible • Non-stock items: Production time depending on model approximately 2–4 weeks • Worldwide shipping: Reliable and professional delivery to all countries • Custom dimensions: Manufactured according to customer-specific requirements 📍 Showroom address: Im Mannenberg 9a, 53557 Bad Hönningen For further information or tailored solutions, please feel free to contact us!

Condition: excellent (used), functionality: fully functional, tank capacity: 68,000 l, usable tank capacity: 65,000 l, total height: 9,865 mm, inner diameter: 3,400 mm, outer diameter: 3,800 mm, overall weight: 4,200 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 20 x 68 m³ ZKG Tank / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 20 Total volume: approx. 58,000 liters Tank type: Pressure tank Condition: Used Suitable for food: Yes Design: Suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Cylindrical height: approx. 6,000 mm Total height: approx. 9,865 mm Weight (empty): approx. 4,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.86 bar Wall thickness, cone: approx. 4–5 mm Wall thickness, top head: approx. 6 mm Wall thickness, shell/cylinder: approx. 3.5–4 mm Operating temperature: -10°C / +50°C Material: Inner shell material: V2A (1.4301) Internal surface: Ground and pickled Heating / Cooling System Cooling medium: Glycol Operating pressure: 2.0 bar Operating temperature: -3°C Heating / cooling system material: V2A (1.4301) 2 x shell cooling zones (approx. 11 m² each) with approx. 100 liters capacity each 1 x cone cooling zone (approx. 4 m²) with approx. 70 liters capacity Insulation Insulation thickness: approx. 150 mm Insulating material: PU foam / mineral wool Cone cladding: Stainless steel (1.4301) Bjdpfjyhzq Asx Anpjlp Shell cladding: Aluminum trapezoidal sheeting Equipment Mounting type: Hanging lugs Number: 4 Attachment: Fixed Top base type: Basket dome Bottom base type: Cone Top head: 1 x manway DN 500 with insulation hood 1 x roof edge railing 1 x valve dome with the following fittings/connections: 1 x vacuum valve (DN 40) 1 x safety valve (DN 40) 1 x cleaning fitting with spray head DN 32 (removable) Shell: 2 x connections for temperature measurement with insulation box 1 x cable protection tube DN 50 1 x dome drain pipe DN 15 1 x cleaning line DN 50/40 3 x cooling supply (DN 25 / R1") 3 x cooling return (DN 25 / R1") Bottom/cone: 1 x sampling valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded connection DN 65 terminating Documentation: Drawing Inspection book TÜV certificate The tanks originate from various years of manufacture (1990–2004) and may differ slightly in equipment and design.

Condition: new, Year of construction: 2025, machine/vehicle number: sn. 816, functionality: fully functional, total height: 3,500 mm, total length: 3,600 mm, total width: 4,000 mm, cutting height (max.): 1,300 mm, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, space requirement height: 3,600 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, warranty duration: 12 months, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Blodewq Dvdopfx Anpop Machine equipment includes: Automatic, self-adjusting saw blade tensioning system Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Cutting width: 2100 mm Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. As the manufacturer, we provide installation and servicing within the EU. The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Condition: new, tank capacity: 437 l, wall material: stainless steel, Unused, temperature-controlled stainless steel container with insulation Article number: 10910 Volume: Approx. 437L Material: 1.4404 stainless steel V4A Surface: Interior IIId, exterior satin finish Welded seams inside the container pickled, passivated and brushed Operating pressure: ATM Operating pressure for thermoplates: Max. 1.8 bar -Vertical design on three legs -Top: 1/2 hinged lid, 1/2 fixed with screws, with tension handle (can be locked open) -Sheet metal grids below the hinged lid as a strainer, screwed on, removable -1x thermoplate on the cylinder, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -1x thermoplate on the bottom, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -Insulation t=30mm mineral wool for cylinder and bottom, welded stainless steel insulation jacket 1.4301 -Bottom: Conical bottom with central outlet and forward-extending pipe DN50 DIN11851 -Outlet valve: ball valve DN50 DIN11851, gasket EPDM/PTFE Bsdpfx Anezwmr Eopelp -Agitator flange on the top Container dimensions: Outer diameter: 650mm Cylindrical height: 1300mm Overall width: 750mm Overall length: 850mm Overall height: 1930mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4404 / AISI 316 Features: Outlet diameter: DN50 Distance from outlet to bottom: 110mm Height of legs: 330mm Nameplate: yes Agitator: Variable speed propeller agitator for low-viscosity media Type: SRT8-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.75kW Speed: 1410 RPM (continuously adjustable) Voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for smooth running within the speed range -1 piece 3-blade mixing propeller Ø 138mm at the end of the agitator shaft Mixing propeller made of a stainless steel casting, highly polished -Stainless steel flange, sealing V-ring, EPDM -Motor mounted on neoprene rubber buffers Infinitely variable speed control of the agitator motor via a compact, motor-mounted frequency inverter, manufactured by Getriebebau NORD. Including potentiometer. Pre-programmed for agitator operation. Operating voltage 3PH 400V

Condition: used, TIRA Climate simulation chamber / walk-in climate test chamber TIRA TCZ 4022 S -2K Air-cooled | -40 to +140 °C | Refrigerant R449A For sale is a used, walk-in climate simulation chamber from the manufacturer TIRA. The system consists of an insulated test chamber, an air handling unit, external humidification, a machine unit and a control cabinet. It is used for temperature and humidity testing. Technical data: Manufacturer: TIRA Type: TCZ 4022 S -2K Cooling type: air-cooled Temperature range: -40 to +140 °C Temperature stability, supply air: over time ≤ ±0.5 °C; spatially ≤ ±1.0 °C Heating / Cooling: approx. 2 K/min each (-30 to +85 °C, without test item and thermal load) Climate range: +10 to +90 °C Humidity: 10 to approx. 95 % RH Dew point: +5 to +89 °C Humidity stability, supply air: over time ≤ ±2.5 % RH With heat compensation up to 16 kW: Bledpfx Anjz Sn Uvjpop +15 to +80 °C; 15 to approx. 80 % RH Dew point: +10 to +74 °C Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm External dimensions: approx. 2660 x 6460 x 2800 mm Door opening (W x H): 2260 x 2260 mm Climate module KB 127: 1700 x 800 x 1400 mm Control cabinet: 800 x 500 x 2000 mm Power connection: 400 V, 3/PE/N, 50 Hz Rated power: 95 kW; Rated current: 150 A Fuse rating: 200 A, slow-blow Total weight according to specifications: approx. 5834 kg Equipment: Stainless steel interior and floor Double-wing door with viewing window approx. 1000 x 1000 mm Supply air at the top / exhaust air at the bottom on the rear wall Electric heating, direct cooling and dehumidification Bitzer 6G-30.2Y; Refrigerant R449A; Oil SEZ 32 Steam humidifier EDB 40 4 test chamber spotlights à 500 W Insulation: 80 mm PUR and 120 mm mineral wool Floor load: 15,000 N/m²; Wheel load: 1,500 N/wheel (≥ 4 cm²) Application areas: Temperature and climate testing Environmental simulation Material and component testing Quality assurance and development Condition: Used Optical condition according to pictures Scope of delivery: TIRA TCZ 4022 S -2K with associated components as shown in the pictures Items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), A combined sanitary container unit, consisting of two containers, presumably of the Czech make Moravia Containers or Containex, is available. Container exterior dimensions X/Y/Z: approx. 6060mm/2440mm/2840mm, interior height: 2500mm, protective primer: epoxy, insulation: mineral wool, floor traffic load: 2500N/m², exterior sheet metal thickness: 0.5mm, corrugation depth: 10mm, urinal: 6, cubicles: 6, washbasins: 5, electric heating convectors: 2, under-sink units: 5. The unit is designed for simple and quick disassembly and reassembly. The two containers must be separated during transport. Documentation available. An on-site inspection is possible. Blodpfszcp Uujx Anpop

Condition: excellent (used), functionality: fully functional, tank capacity: 120,500 l, total height: 20,000 mm, inner diameter: 3,000 mm, outer diameter: 3,300 mm, wall material: stainless steel, wall structure: single-walled, number of chambers: 1, operating temperature: 20 °C, operating pressure: 3 bar, Stainless steel pressure vessel, vertical, insulated Technical data / Dimensions Available quantity: 8 Volume: approx. 120,000 liters Vessel type: Pressure vessel Condition: used Food-grade: yes Design: vertical Internal diameter: approx. 3,000 mm External diameter: approx. 3,300 mm Overall height: approx. 20,000 mm Specific gravity of the medium: 10.00 t/m³ Operating pressure: Overpressure Operating overpressure: 3.00 bar Wall thickness, bottom: approx. 6.0 mm Wall thickness, top: approx. 4.5 mm Wall thickness, shell / cylinder: approx. 3.5-5 mm Operating temperature: 20°C Material / Properties Material, inner shell: Stainless steel Material grade: V2A-1.4301 (AISI 304) External surface: Ground, welded seams passivated Welded seams, internally ground: Yes Insulation Insulation present Insulation thickness: approx. 120 mm Insulation material: Mineral wool Material, insulation jacket: Aluminum Insulation jacket: Trapezoidal sheet Equipment Base type: Foot ring / base ring Quantity: 1 Mounting: fixed Bottom type, top: Dished end Bottom type, bottom: Dished end Top: 1 x Insulated dome DN 900 1 x Access opening with dome cover DN600 1 x Valve dome cover with the following connections: 1 x Cleaning-ventilation-valve combination (RLV) DN 50 1 x Vacuum valve, spring-loaded with 2 heating elements and thermostat 1 x Safety valve 1 x Burst disc 1 x Thread DN 50 for probe Shell: 1 x Condensate pipe DN 25 1 x Cable protection pipe DN 32 1 x CIP pipe DN 50 1 x Base ring made of Cr-Ni steel (1.4301) with access opening 600 x 600 1 x Spray pipe with protruding ball head Bottom: 1 x Outlet cup DN 300 1 x Outlet with cover cap, chain, and eyelet DN 80 1 x Connection fitting for sampling tap DN10 Documentation Bjdpfx Anjzvh Dtopolp Drawing Inspection log Inspection certificate

Condition: like new (used), functionality: fully functional, overall weight: 75 kg, empty load weight: 75 kg, maximum load weight: 300 kg, Year of construction: 2025, operating hours: 30 h, Vacuum Lifter for sandwich roof Crane-Attached Lifters: Designed to be used with cranes or other lifting equipment for handling extremely large or heavy panels. A sandwich panel lifter is a specialized lifting device designed to handle and transport sandwich panels, which are widely used in the construction industry for walls, roofs, and facades. Sandwich panels consist of two outer layers (typically metal) and an insu-lating core (such as polyurethane, polystyrene, or mineral wool). These panels are lightweight yet large in size, making them dif-ficult to handle manually. Sandwich panel lifters are essential for ensuring safe, efficient, and precise installation. Key Features of a Sandwich Panel Lifter: 1. Vacuum Technology: - The lifter uses vacuum pads to securely grip the smooth surfaces of sandwich panels without causing damage. - The vacuum system is powered by an electric or pneumatic pump, ensuring a strong and reliable hold. 2. Tilting: - Lifters come with tilting mechanisms, allowing panels to be positioned horizontally or vertically as needed during installation. 3. Lightweight and Portable: - Sandwich panel lifters are designed to be lightweight and easy to transport, making them ideal for use on construction sites. 4. Safety Features: Bedpj Abbavefx Anpjlp - Equipped with safety mechanisms such as vacuum pressure sensors and alarms to ensure the panels are securely held during lifting.

Condition: used, Vertical insulated tank 100m³ Diameter 3.85m Blsdpfsxl Th Njx Anpsp Height 11 m The tank is insulated with mineral wool It is lined with trapezoidal sheet metal It has space for a side agitator The tanks are dismantled, ready for loading.

Condition: good (used), Year of construction: 2009, rotor diameter: 1,000 mm, rotor width: 1,600 mm, Hammer mill Working width: 1600 mm Rotor diameter: 1000 mm Bjdpfx Aji E S Sqsnpelp Drive: 75 kW Application: Shredding of all impact-brittle materials such as - impact-resistant plastics - E-waste -Wood waste - mineral insulation waste (e.g. glass wool, rock wool,...)

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: - External ceiling paneling - Full-surface plenum chamber for air supply Bodsxnpczjpfx Anpjlp Air Exchange System: - Supply system: - Jet turbine 4 kW – 2 units - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: new, functionality: fully functional, Year of construction: 2026, Detailed Specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside - Box: Panels 100 mm thick, filled with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set - Roof: Panels 100 mm thick with mineral wool insulation inside - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display - Total power: 6 kW Blsdpjxna U Uefx Anpsp - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Condition: used, Spirax Sarco Clean Steam Generator Station – 700 kg/h – Year of Manufacture 2019 For sale is a steam-heated clean steam generator station from the manufacturer Spirax Sarco with a clean steam capacity of approximately 700 kg/h. The system consists of a horizontal clean steam generator with an integrated tube bundle heat exchanger, a condensate cooler for feedwater preheating, and a fresh water feed via a control valve. Technical Data Manufacturer: Spirax Sarco GmbH System Type: Clean Steam Generator Station Serial Number: 2019/955 Year of Manufacture: 2019 (according to serial number, to be confirmed) Clean Steam Capacity: approx. 700 kg/h Clean Steam Pressure: 0.8 bar(g) Heating Steam Quantity: approx. 770 kg/h Heating Steam Pressure: approx. 3.5 bar(g) Blodpfx Anjwgkyhopep Total Power Output according to Design Data: 531 kW Feedwater Inlet: 15 °C Minimum Feedwater Pressure: 2 bar(g) Feedwater Quality: according to EN 285 Clean Steam Generator Design: horizontal, with pull-out U-tube bundle Design Pressure, Tube Side: 10 bar Design Pressure, Shell Side: 3 bar Design Temperature: 200 °C each Diameter: approx. 711 mm Length: approx. 2,600 mm Height: approx. 1,400 mm Thermal Output: 452 kW Tube Bundle: Stainless steel 1.4571 Insulation: approx. 100 mm mineral wool with galvanized steel sheet cladding Condensate Cooler / Feedwater Preheating Type: Plate heat exchanger Type: Alfa Nova 27-10H Manufacturer: Alfa Laval Capacity: 61 kW Design Pressure: 25 bar Design Temperature: 225 °C Condensate Quantity: approx. 770 kg/h Feedwater Quantity: approx. 700 kg/h Equipment Control cabinet and control system Electropneumatic pressure control valve Safety and shut-off valves Condensate trap and drain group Pressure sensors and manometers Level control with low water alarm Piping and connecting fittings Base frame with support saddles The system was designed and manufactured in accordance with the European Pressure Equipment Directive applicable at the time of manufacture. Further technical documentation is available upon request. Inspection possible by appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes - Insulated roof - Pass-through doors - Water curtain Bljdpfsxm U Exsx Anpep - Color according to RAL palette - Explosion-proof (EX) version available

Condition: used, 100 m³ buffer tank made of steel, horizontal, in a frame Volume: 100,000 ltr Dimensions (LxWxH): 15,400 mm x 3,500 mm x3,500 mm Insulation: 100 mm mineral wool, on all sides Wall construction: Insulated walls, painted in RAL 9002 Operating pressure: 3.0 bar Test pressure: 4.5 bar Connections: 1 x manhole for inspection work 1 x connection piece (supply and return (boiler)) 1 x connection piece (flow and return (consumer)) Bjdetv Rp Hepfx Anpelp 2 x PT 100 temperature sensors

Condition: used, overall weight: 39,000 kg, first registration: 06/2026, loading space volume: 35 m³, total width: 2,438 mm, total height: 2,670 mm, Year of construction: 2025, !!! NEW !!! WITHOUT PRE-CARRIAGE !!! Type: CIMC Longitudinal Swap Body Tank (CLS) Capacity: 35,000 liters Tare weight: 4,130 kg Operating pressure (max.): 3.0 bar Test pressure: 4.5 bar Temperature range: -40°C to +130°C Approvals: IMO Type 4, RID/ADR-L4BH, UIC, TIR, CSC Shell: 1.4402 (316L), 3.2 mm, 2B finish Ends: 1.4402 (316L), 4.2 mm, hot-rolled, polished Baffles: 4× vertical, CVC-shaped, corrugated, 70% welded Internal finish: Degreased, pickled, passivated, neutralized Ladder: Stainless steel, right rear, theft-proof Catwalk: Aluminium, anti-slip, 475 mm, with cross-steps Handrail: Folding, telescopic, theft-proof Stacking: Up to 3 units Manhole: Ø500 mm, 316 stainless steel, 8-bolt, EPDM/PTFE Revision openings: 3× Ø300 mm, 316 stainless steel, 4-bolt Safety valve: 3", stainless steel, 3.75 bar, without flame arrester, with rupture disc & pressure gauge Air line: 1.5", with ball, safety & non-return valve, gauge accessible from below Vacuum valve: 2" BSP, -0.21 bar Bottom valve: 3", with remote cable closure Steam heating: 8 longitudinal runs, 1" BSP, 3 bar Thermometer: Analog, -40°C to +160°C Insulation: o 50 mm mineral wool (tank & ends) o PU foam under stainless steel straps Cladding: o Shell: 4× 1.8 mm GRP panels Bljdpfx Anjy Ebacspjp Markings: 3× holders for Edgar Weber flip boards, 1× Kemmler mounting bracket Interim sale and errors excepted! Sale exclusively according to our Terms and Conditions. Important notice – Important information: Despite careful review of all details in our offer, errors may occur. Some may be due to transmission errors in the systems of various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute any legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information to initiate contractual negotiations. The information provided here is without guarantee and does not represent warranted characteristics.

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric - Upright design on four tubular legs with forklift channels - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Equipment: 1x Top traverse with two hinged cover halves, clamp function for the lid Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Bsdpfx Anjw Dy D Depelp Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: new, Year of construction: 2026, - External dimensions: 7200x5200x3800 mm - Internal dimensions: 7100x5100x3100 mm - Entrance gate: 4000x3100 mm (four wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 21kW - Seating: inside/outside Bjdpfx Anom Tv I Aopelp (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: new, Year of construction: 2026, - External dimensions: 8125x4650x4600 mm - Internal dimensions: 8000x4500x3800 mm - Entrance gate: 4000x3800 mm (four wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 22kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated Blodjnbdlbopfx Anpop - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 36pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: like new (used), Year of construction: 2024, operating hours: 490 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, COMPLETE MINERAL MASTERBATCH PRODUCTION LINE – PELLETIZING PROCESS High-concentration mineral masterbatch • Turnkey industrial installation • Spain ASKING PRICE: XX.XXX + VAT | COMPLETE LINE ONLY A complete production solution Complete industrial installation designed for the production of highly concentrated mineral masterbatch. The line integrates raw material handling, weighing/dosing, high-speed mixing, conveying, pelletizing, screening, and bagging into a single, coordinated system. The equipment is offered as one complete lot, dismantled and available for relocation. Capacity Approx. 750–850 kg/h* Operating hours Maximum 490 h Mixer Bjdjz Aibaopfx Anpelp 500 L / 300 L usable / 75 kW Pelletizer 350 mm / 37 kW Automation Siemens S7-1200 PLC Power supply Includes 200 kVA Perkins generator Integrated process RAW MATERIAL FEEDING → AUTOMATIC WEIGHING/DOSING → HIGH-SPEED MIXING → TRANSFER → PELLETIZING → SCREENING → BAGGING Why this line is attractive • Complete and integrated: avoids the engineering and integration work involved in sourcing the equipment individually. • Very low operating hours: maximum recorded operating time is 490 h. • Industrial-scale mixing: 500 L mixer with 75 kW drive and variable-speed control. • Automated dosing and control: Siemens S7-1200 PLC architecture with weighing and recipe-management functions. • Relocatable asset: installation is offered dismantled, making it suitable for transfer to another industrial site. *Capacity is an approximate figure based on the installation configuration and intended application; actual throughput depends on formulation, operating conditions, and product specification.

Year of construction: 2013, condition: used, Additional title: trub removal Capacity: 182 hl Volume net: 150 hl Volume gross: 182 hl Material: 1.4301 Position: outdoor Bsdpfx Aexbn S Ionpjlp Features: insulation (100 mm mineral wool)

Condition: new, Year of construction: 2026, The illustrative photos show the realizations for the customer of the 4x7 cabin Bledpfjr Ha Ehjx Anpjp The offer applies only to the painting booth without the preparation area (possibility to purchase a preparation zone at the customer's request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (three wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 16 kW - Floor fully grated - Air supply system: Jet turbine 4.0kW - 2 pieces - Exhaust system: Stream turbine 5.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 8 pcs. Power: 48W - one piece 1000 lumens - Burner Riello 40 G20 95-213 KW - The cabin is available in different colors